Small
·
2019
·Vol. 15
·期 52
·1905451
·
IF 10.856
Lijun Ji,Mindong Gong,Tong Xu,Jun Gu,Xu Jiang,Taotao Liang,Yu Chen,Qingren Liu
The interactions of ions and molecules with material surface are highly dependent on the surface properties of the material. Therefore, the distribution of ions or molecules near the material surface may be affected by the surface properties. This phenomenon can be significant enough for controlling the structure of a material synthesized in the sub-micrometer scale confinement space of a template. This work confirms that inverse opals are perfect templates for offering confinement space, while their different surface properties can strongly affect ion and block copolymer distribution in the confinement space. This surface effect principle can be used for the controlled synthesis of colloids with complex composition. As an example, four kinds of mesoporous magnetic bioactive glass colloids with ordered mesopores, core–shell structure, open surface pores, or disordered mesopores are prepared by using polystyrene and carbon inverse opal templates. This work reveals that inverse opal templates possess great advantage in controlled synthesizing colloidal structures due to their surface effect on ions and molecules and confinement space.
研究领域:
生物材料学
·
纳米医学
·
组织工程
·
药物递送
·
生物矿化
·
胶体化学
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Zhengjian Li,Sian Chen,Liting Cui,Haining Wang,Shanfu Lu,Yan Xiang
The acidic-alkaline interface of a bipolar membrane fuel cell (BPMFC) is the place to generate water, which significantly affect the output performance of BPMFC by regulating the water distribution due to the ion conductivity and oxygen reduction reaction (ORR) kinetics in cathode. To investigate the influence of water diffusivity ( D w ) on the water distribution, four alkaline polymer electrolytes with different D w is selected as anion exchange membrane or alkaline electrolyte ionomer to assemble BPMFCs. A combined experimental and simulated study reveals the positive correlation relationship of D w to the water distribution and performance of BPMFC. By increasing the D w of the alkaline polymer electrolytes, the interfacial-generated water amount can be increased and promptly transport to the cathode, thereby satisfying the ion conductivity and increasing the ORR kinetics, and breakthrough the peak power density of the BPMFC with 1.06 W cm −2 without humidification .
研究领域:
电化学
·
能源材料
·
燃料电池
·
高分子科学
·
界面科学
✓ 已验证
DOI
高影响因子
Small Methods
·
2024
·Vol. 8
·期 7
·2301233
·
IF 10.7
Xiaolin Ye,Ningxin Xiong,Shaopei Huang,Qixing Wu,Hongning Chen,Xuelong Zhou
Tin-based hybrid flow batteries have demonstrated dendrite-free morphology and superior performance in terms of cycle life and energy density. However, the quick accumulation of electrodeposits near the electrode/membrane interface blocks the ion transport pathway during the charging of the battery, resulting to a very limited areal capacity (especially at high current density) that significantly hinders its deployment in long-duration storage applications. Herein, a conductivity-activity dual-gradient design is disclosed by electrically passivating the carbon felt near the membrane/electrode interface and chemically activating the carbon felt near the electrode/current collector interface. In consequence, the tin metals are preferentially plated at the region near electrode/current collector, preventing the ion transport pathway from being easily blocked. The resultant gradient electrode demonstrated an unprecedentedly high areal capacity of 268 mAh cm −2 at a current density of as high as 80 mA cm −2 . Numerical modeling and experimental characterizations show that the dual-gradient electrode differs from conventional electrodes with regard to their reaction current density distribution and electrodeposit distribution during charging. This work demonstrates a new design strategy of 3D electrodes for hybrid flow batteries to induce a desirable distribution of electrodeposits and achieve a high areal capacity at commercially relevant current densities.
研究领域:
电化学储能
·
材料科学
·
能源化学
·
电池技术
·
功能材料
·
电化学工程
✓ 已验证
DOI
高影响因子
OPTICS AND LASER TECHNOLOGY
·
2023
·
IF 5
Shizhou Tan,Pengcheng Jian,Maocheng Shan,Yongming Zhao,Zhihua Zheng,Yiming Yang,Yuhui Zeng,Dan Xu,Zhenyu Chen,Changqing Chen,Feng Wu,Jiangnan Dai
In this work, we demonstrated tunable structured AlGaN-based nanoporous (NP) distributed Bragg reflectors (DBRs) with high-reflectivity through one-step vertical-lateral electrochemical etching (ECE). The aperture of nanopores in the doping layer and the size and density of V-pits on the surface of NP-DBRs can be tuned by controlling the etching bias. Furthermore, by further tuning the thickness of alternating layers, we achieved high reflectivity of NP-DBRs at multiple center wavelengths within the wavelength range from 280 to 800 nm. To explore its potential applications, MoS 2 with a photoluminescence (PL) emission in the red light region was grown for the first time on the NP-DBRs. Due to the light localized effect of surface V-pits and the high reflectivity of the bottom DBRs , the PL intensity of MoS 2 was significantly enhanced by a factor of 37.3 compared to the region without NP-DBRs. The PL enhancement of MoS 2 on porous AlGaN and different periodic NP-DBRs further validated the PL enhancement mechanism. The corresponding theoretical simulations also revealed that the PL enhancement should be attributed to the combined effect of enhanced light absorption and NP-DBRs induced emission interference. The fabricated AlGaN-based NP-DBRs provide a new approach for improving the quantum efficiency of two-dimensional layered materials, which holds significant importance for advancing the development of miniaturized and integrated 2D/3D heterogeneous structure systems in the field of optoelectronics.
研究领域:
光电子学
·
半导体材料
·
纳米光子学
·
二维材料
·
固体物理
·
表面科学
·
集成光子器件
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Yinwei Fu,Xiaofeng Lei,Huiming Yin,Xizheng Liu
Flexible lithium–air batteries (LABs) with a redox mediator (RM) in the electrolyte demonstrate enhanced round-trip efficiency. However, their cycle performance is unsatisfactory due to severe corrosion of the Li metal anode. Herein, we propose a two step gelatinization strategy to fabricate a gradient RMs (including LiI, TMPD, and DMPZ) gel electrolyte, in which the bare electrolyte gelatinization on the Li surface and then the electrolyte contained RMs sequentially gelled on the formed gel. The RMs mainly distributed at the surface and anchored at the cathode side. By suppressing the shuttle of RMs in the electrolyte and alleviating the passivation of the Li anode, the mid-charging potentials can reach 3.44 and 4.08 V at the 15th cycle with and without the LiI mediator, respectively. The energy efficiency is 63% even at the 150th cycle, whereas the corresponding energy efficiency are only 47% and 51% for the LABs with liquid and normal gel electrolytes, respectively. Moreover, the cycle life of the battery containing the gradient gel electrolyte is three times longer than that with the liquid electrolyte. The gel electrolyte further offers the flexibility of the device, and the laminated cells thus fabricated can readily operate under harsh bending conditions.
研究领域:
电化学
·
能源材料
·
纳米材料
·
界面化学
·
储能技术
·
先进电池
·
功能高分子
·
柔性电子
✓ 已验证
DOI
高影响因子
Plasmonics
·
2015
·Vol. 11
·期 3
·909-915
·
IF 2.238
Wang Shuxia,Wang Hui,Liu Ting,Huang Yingzhou,Chen Guo,Wei Hua,Su Xun,Zeng Xiping,Xia Zengzilu,Wen Weijia,Sun Mengtao
In the propagating process along metal surface, surface plasmon polaritons (SPPs) mainly decay into thermal loss or release into photons, while a part of them were converted into electrons with high energy termed as hot electrons, which have great significance in photonics and electronics. In this work, the generation of plasmonic hot electrons was ascertained in the nanoparticle-film system through plasmon-driven surface catalysis (PDSC) reactions. The surface-enhanced Raman scattering (SERS) spectra of p,p'-dimercaptoazobenzene (DMAB) catalyzed by 4-nitrobenzenethiol (4NBT) experimentally demonstrated the essential catalysis electrons were generated in this hybrid plasmon mode. The results pointed out the priority of plasmonic hot electron generation in the dimer-film gap compared to the monomer-film gap which was analyzed by the surface electric and charge distribution. Furthermore, the SERS spectra of 4NBT in the metal nanoparticle-dielectric film system confirmed the necessity of hybrid plasmon mode in the generation of plasmonic hot electrons in the nanoparticle-film system. Because of the simple configuration and convenient fabrication of nanoparticle-film system, the work on this hybrid plasmon mode has a significant role in promoting the application of plasmonic hot electrons.
研究领域:
纳米光子学
·
等离激元学
·
表面科学
·
催化化学
·
分子光学
·
材料物理
·
半导体器件
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）