JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS
·
2019
·
IF 2.683
Zilong Zhang,Yangyang Lv,Xiqiao Chen,Zhuang Wu,Yaoyi He,Lei Zhang,Yanhong Zou
The porous flower-like Ni/C composites were simply prepared through the pyrolysis of Zn-doped metal organic frameworks (MOFs) under a N 2 atmosphere. The method is facile, controllable and without surface active agents. The microstructure, composition, and electromagnetic parameters can be easily controlled by varying thermal decomposition temperature to achieve the high electromagnetic loss. Interestingly, the Ni/C composites calcined at 800 °C have strong electromagnetic absorption with the maximum reflection loss (RL) value of −52.4 dB. In addition, the effective absorption band width (<−10 dB) of absorbing coating is as high as 5 GHz, and it is noteworthy that the composites have a very thin matching thickness of 1.6 mm. The excellent electromagnetic attenuation performance can be ascribed to the novel flower structures, synergistic effect between nickel and carbon, and remarkable impedance matching. This designed flower-like composites supply an impactful pathway to achieve potential candidate materials as highly effective microwave absorbers.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2023
·
IF 5.5
Wenqi Zou,Heyu Li,Minghua Liu,Yuancai Lv
In this study, Cu was loaded on the surface of Ni-MOF by impregnation, and significantly improved the catalytic activity on lignin and its derivatives. The characterization showed that the non-noble bimetallic catalyst owned good dispersion, rich acid sites and stable structure was successfully synthesized. The introduced Cu reduced the reduction temperature of Ni, increased the acidity of the catalyst, and thus improved the catalytic performance and product selectivity of the catalyst. Under the mild conditions (120 °C), the conversion percentage of BPE was as high as 89.6 % using isopropyl alcohol as the hydrogen source. When the reaction temperature was 260 °C, the depolymerization percentage of corn cob lignin was 81.12 %, and the yield of phenol monomer could reach 11.46 wt. %. This work may provide an effective strategy for the preparation of efficient bimetallic catalysts for lignin hydrogenolysis .
研究领域:
化学工程
·
催化材料
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2021
·Vol. 9
·期 8
·5086-5096
·
IF 12.732
Dawei Liu,Yunchen Du,Ping Xu,Fengyuan Wang,Yahui Wang,Liru Cui,Honghong Zhao,Xijiang Han
Hierarchical microstructures are playing important roles in the design and fabrication of high-performance microwave absorbing materials (MAMs) owing to their unique advantages. In this work, a series of special “double-hierarchical” N-doped carbon nanotubes wrapping waxberry-like Ni@C microspheres (NC@NCNTs) have been rationally designed and successfully fabricated by two-step pyrolysis processes, where the loading amount of NCNTs on the waxberry-like Ni@C microspheres can be easily modulated by changing the dosage of melamine. Benefiting from sufficient attenuation ability and good impedance matching, NC@NCNTs-2, whose relative carbon content is 51.1 wt%, exhibits the best reflection loss (RL) characteristics among this series of composites, including the minimum RL intensity of −41.5 dB and an effective absorption bandwidth of 5.2 GHz with an absorber thickness of only 1.7 mm. This performance is superior to that of many homologous Ni/C composites reported previously. The investigation on EM properties indicates that the unique “double-hierarchical” architecture of NC@NCNTs can not only create stronger dipole orientation and interfacial polarization relaxation, but can also result in higher conductive loss as well as extra multiple reflection effects for incident electromagnetic waves. We believe that these results will provide some inspirations and pathways for the production of high-performance MAMs with senior microstructures in the future.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2025
·
IF 3.9
Jiaxing Hou,Guohao Zou,Xinrui Liu,Mingge Li,Pengyu Yang,Xiaobin Zhang,Yan Chen,Qian Zhang,Xiaoping Wu,Tiejun Wang
The one-step hydrothermal reconstruction of bioethanol into higher alcohols represents a pivotal advancement in green chemistry, addressing both environmental sustainability and energy regeneration. Herein, a rational design of Ni@C-CeO2 catalysts via a sol–gel method for efficient aqueous-phase ethanol C–C coupling was reported. Systematic investigation of Ni loading and precursor carbonization temperature revealed their critical roles in modulating catalyst microstructure and performance. The optimized Ni-2@C-CeO2-500 catalyst demonstrated exceptional activity under 190 °C and 12 h, achieving ethanol conversion of 72.0% and C4+ alcohol yield of 55.6%. Advanced characterization techniques unveiled structure-performance relationships: (1) controlled Ni loading ensured optimal nanoparticle dispersion, while excessive loading induced aggregation; (2) carbonization at 500 °C balanced carbon matrix architecture and CeO2 reducibility. XPS analysis revealed that oxygen vacancy concentration critically modulates strong metal–support interactions through Ce3+-induced charge redistribution, facilitating interfacial electron transfer during reaction. Furthermore, the Ni-2@C-CeO2-500 catalyst demonstrated excellent stability with sustained activity retention over five consecutive cycles. This work establishes a renewable and technologically viable alternative to conventional petroleum-derived chemicals widely utilized in the chemical industry, demonstrating significant potential for applications in green and sustainable chemistry.
研究领域:
绿色化学
·
催化化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Yongchao Rao,Xiaosi Qi,Qiong Peng,Yanli Chen,Xiu Gong,Ren Xie,Wei Zhong
It was well recognized that the penetrated electromagnetic (EM) wave could be dissipated by means of magnetic loss, polarization loss and conduction loss. In order to improve their loss capacities and take full advantage of flower-like geometrical morphology, in this study, we proposed a simple route for the production of flower-like core@shell structure NiO/Ni@C microspheres through the carbon thermal reaction using NiO microflowers as precursor. The obtained results revealed that our proposed strategy successfully synthesized the core@shell structure magnetic carbon-based multicomponent nanocomposites without destroying the geometrical morphology of precursor. By regulating the annealing temperature, the as-prepared NiO/Ni@C microspheres with different contents of Ni and degrees of graphitization could be selectively synthesized, which effectively boosted their magnetic loss, polarization loss and conduction loss capabilities. Therefore, the elaborately designed NiO/Ni@C microspheres displayed the superior microwave absorption performances including strong absorption capability, broad absorption bandwidth and thin matching thicknesses compared to the NiO precursor. In summary, our findings not only provided a simple route to design and synthesize flower-like core@shell structure magnetic carbon-based nanocomposites as novel microwave absorbers, but also presented an effective strategy to comprehensively improve their loss capacities.
研究领域:
材料科学
·
电磁学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Energy Storage
·
2021
·
IF 6.583
XianYan Jiang,ShuPing Deng,JunJie Liu,Ning Qi,ZhiQuan Chen
In this work, metal oxide/metal@carbon (NiO/Ni@C) composites as electrode materials have been successfully prepared using the pillared Ni 2 (bdc) 2 (dabco) (bdc = 1,4-benzenedicarboxylic acid, dabco = 1,4-diazabicyclo[2.2.2]-octane) as the precursor. Owing to the multiple active sites (NiO, Ni and Carbon), rich oxygen defects, and abundant Ni 3 + , the NiO/Ni@C composites show excellent electrochemical performance. A maximum specific capacitance of 805.3 F g −1 at 0.5 A g −1 and 576.2 F g −1 at 10 A g −1 is obtained for the NiO/Ni@C electrode material calcined at 500 °C, indicating a high rate capability. Meanwhile, the assembled asymmetric supercapacitor (ASC) NiO/Ni@C//PEDOT-AC (poly(3,4-ethylenedioxy-thiophene)-activated carbon) has a wide working voltage of 0–1.7 V, high specific energy of 20.7 W h kg −1 , superior specific power of 12920 W kg −1 , and excellent cycle stability with capacitance retention of 69.7% after 10 000 cycles. Furthermore, a red light-emitting diode (LED) is lighted up by two NiO/Ni@C//PEDOT-AC ASCs in series connection.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2025
·
IF 7.3
Mingqiang Chen,Zhiwei Yang,Haosheng Xin,Yishuang Wang,Defang Liang,Chang Li
As a major constituent of renewable biomass, conversion of cellulose to high-value chemicals presents a promising strategy. Herein, we designed a multifunctional Ni@C/WOx catalyst for direct cellulose conversion to ethylene glycol. This catalyst exhibited excellent stability while achieving a high ethylene glycol yield (69.4%). Graphene-encapsulated metal Ni stabilized hydrogenation activity and minimized metal leaching. The interaction between Ni@C and WOx facilitated the reduction of WOx and increased the formation of W5+ species. Characterization by electron paramagnetic resonance (EPR), X-ray photoelectron spectroscopy (XPS), NH3-TPD, and Py-IR confirmed that W5+ formation induces oxygen vacancies and acid sites on the catalyst support surface. At 30% Ni loading, strong metal–support interactions maximized the W5+ concentration and oxygen vacancy, enhancing the C–C bond cleavage efficiency. Consequently, the synergistic effect between Ni@C and WOx effectively facilitates key steps in cellulose conversion to ethylene glycol: cellulose hydrolysis, glucose retro-aldol condensation, and glycolaldehyde hydrogenation. The understanding of these structure–performance relationships has provided new ideas for the green and sustainable production of high-value-added chemicals from cellulose.
研究领域:
催化
·
绿色化学
·
生物质转化
·
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Junnan Wang,Qijie Wang,Wei Wang,Pinbo Li,Yazhen Zhao,Junjian Zhai,Wu Zhao,Han Zhang,Jiangni Yun,Zhiyong Zhang,Jiangxiao Tian,Zhouhu Deng,Junfeng Yan
In this study, a unique dual-spatial three-dimensional (3D) porous structure comprising Ni/C hollow microspheres was prepared from a Ni-based metal organic framework (Ni-MOF) embedded in graphene foam (GF) by the solvothermal method followed by calcination . The graphene foam-based composite, Ni/C@GF (NCGF), exhibited a stable spatial conductive network structure and diverse porous architecture, promoting the microwave absorption (MA) properties of composites. The NCGF with a Ni/C and GF ratio of 1:2.5 displayed a reflection loss (RL) value of ─63 dB with 15 wt% loading, while the thickness is only 1.76 mm. Further, its effective absorption bandwidth (EAB) reached to 5.4 GHz at 2 mm thickness. In addition, when the RL value is less than ─20 dB, the NCGF still manifests a wider bandwidth (2.2 GHz) and a relatively low thickness (1.76 mm). In addition to the extraordinary attenuation ability, the excellent MA performance is mainly ascribed to optimized impedance matching characteristics. Moreover, multiple reflections promoted by the dual-space structure also play a significant role during the microwave absorption process.
研究领域:
材料科学
·
纳米复合材料
·
电磁功能材料
·
物理化学
·
能源材料
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Junwei Liao,Zhonghai Liu,Yongjun Ling,Qian Zhang,Songbai Qiu,Juwen Gu,Jiajin Li,Huafeng Dong,Jinliang Song,Tiejun Wang
Direct upgrading of aqueous bio-ethanol into higher alcohols is an emerging and highly attractive protocol to produce bio-fuels. However, it remains a great challenge to achieve high yield and selectivity of long-carbon chain higher alcohols, especially for C 8+ alcohols. Herein, the carbon encapsulated NiMo catalysts were designed and fabricated for direct upgrading of aqueous bio-ethanol. The NiMo@C catalyst with Ni/Mo ratio of 6/1 exhibited excellent performance with 89.4 % of bio-ethanol conversion and 42.1C-mol% of higher alcohols yield. The selectivity of C 8-16 products reached 44.7 %, which can be directly hydrodeoxygenated to produce bio-jet fuels. Characterization and DFT calculation results revealed that the doping of Mo tuned the electronic state of Ni and modified the surface properties ( i.e. , hydrophilicity, lipophilicity, and [OH] − adsorption), which enhanced the interaction of active site (NiMo-[OH] − ) with intermediate aldehyde in the oil phase and promoted secondary upgrading reaction to form C 8-16 alcohols. This work provides a promising approach to produce bio-jet fuels by direct upgrading of biomass fermentation ethanol.
研究领域:
能源材料
·
催化化学
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2020
·
IF 5.339
Dandan Song,Jing Zheng,Nosang V. Myung,Jingli Xu,Min Zhang
A sandwich-type electrochemical immunosensor was developed for the detection of CEA where hollow magnetic silica coated nickel/carbon (Ni/ [email protected] 2 ) nanocomposites was used as an immobilized carrier and gold nanoparticle-coated PANI microsphere ( [email protected] @Au) as electrochemical transducer. Magnetic assembly of Ni/ [email protected] 2 nanocomposites allow easy separation and assembly which eliminates the further modification process. In addition, the prepared [email protected] @Au possess good biocompatibility, and electrical conductivity. The fabricated immunosensor show excellent sensing performance including a wide dynamic range from 0.006 to 12.00 ng mL −1 and low detection limit at 1.56 pg mL −1 . Moreover, this sensor shows superior selectivity with excellent reliability and reproducibility which might lead into easier implementation in clinical setting.
研究领域:
生物化学
·
分析化学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2022
·
IF 9.221
Yunfeng Wang,Yingang Gui,Shasha He,Jiacheng Yang
The application of conventional sensors is limited due to energy supply issues and environmental problems, and current triboelectric nanogenerator (TENG) based self-powered sensing systems is hard to meet the specific requirement. In this paper, TiO 2 /Ni/C composites were prepared using MOF-derived Ni/C materials for SO 2 F 2 detection at room temperature. The excellent pore structure and high electrical conductivity of Ni/C material greatly improve the sensitivity properties of TiO 2 . The TiO 2 /Ni/C composites-based SO 2 F 2 sensor exhibits a wide detection range of 5–200 ppm concentration and a fast response/recovery time of 26 s/9 s, while its response value for 200 ppm SO 2 F 2 is 18.34 times higher than that of the pure TiO 2 -based sensor. Furthermore, by modifying the PVDF film with TiO 2 , the permittivity of PVDF is greatly improved, and the surface potential is 2.6 times higher than that of pure PVDF film. Eventually, a dual-layer hybrid TENG based on TiO 2 /PVDF composite film was constructed. Its upper TENG powers the TiO 2 /Ni/C composite sensor, and the lower hybrid TENG drives the thermohygrometer to realize a self-powered temperature and humidity-corrected SO 2 F 2 sensing system, which can accurately implement SO 2 F 2 gas concentration alarms at 10 ppm, 50 ppm, and 100 ppm at different humidity levels. This work broadens the application of TENG in the field of self-powered gas sensing while providing a new idea to achieve the trace detection of SO 2 F 2 at room temperature.
研究领域:
材料科学
·
纳米技术
·
传感器学
·
环境监测
·
能源材料
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2019
·
IF 5.162
Shuqi Fang,Zhibing Cui,Yuting Zhu,Chenguang Wang,Jing Bai,Xinghua Zhang,Ying Xu,Qiying Liu,Lungang Chen,Qi Zhang,Longlong Ma
Herein, we reported in situ synthesis of biomass-derived Ni/C catalyst by self-reduction with pomelo peel. Compared with the conventional method, which includes carbonization , activation, impregnation and reduction, the entire preparation process was simplified to two steps, which was more straightforward. This synthesis method was green as Ni/C can be prepared without any additional chemical and the self-reduction process was realized in N 2 , which can avoid using H 2 thus averting some problems such as storage, transportation and safety of H 2 . Meanwhile, the size and dispersion of Ni particles can be controlled by changing carbonization temperature. The synthesis mechanism of Ni/C catalyst with self-reduction was investigated, which was mainly attributed to the carbon and reducing gas produced during the carbonization process. For the catalytic performance of GVL synthesis, a high yield (94.5%) can be obtained and it exhibited good stability up to 5 cycles without obvious loss of catalytic activity .
研究领域:
催化
·
绿色化学
·
材料科学
·
生物质转化
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）