Chemistry of Heterocyclic Compounds
·
2021
·Vol. 57
·期 7
·806-816
·
IF 1.277
An Xiaoying,Gao Lei,Wang Mingliang,Wu Haitao,Wang Lanzhi
Novel, efficient and environmentally friendly approaches have been developed for the synthesis of 1,5-benzodiazepine-2,3-dicarboxylates by one-pot three-component domino reactions in the presence of a catalytic amount of γ-Fe 2 O 3 @SiO 2 /Ce(OTf) 3 in EtOH at ambient temperature. A total of 32 2,5-dihydro-1 H -1,5-benzodiazepine-2,3-dicarboxylates and 2-methyl-2,3-dihydro-1 H -1,5-benzodiazepine-2,3-dicarboxylates with enamine or imine structure of the heterocycle, respectively, were obtained in good yields by reacting substituted 1,2-phenylenediamine, β-carbonyl esters, and ethyl glyoxylate or ethyl pyruvate. One-pot reactions were successfully realized to form one new cycle and four new bonds (one C–C, two C–N, one C=C or two C–C, one C–N, one C=N). Furthermore, plausible mechanisms for the formation of 1,5-benzodiazepine-2,3-dicarboxylates have been proposed. The salient features of this reaction include short reaction time, mild reaction conditions, moderate to excellent yields, recyclability of the catalyst, and wide substrate scope.
研究领域:
有机化学
·
合成化学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2010
·
IF 1.616
Zhenglong Yang,Xujing Shi,Junjie Yuan,Hongting Pu,Yongsheng Liu
Poly(3-hexylthiophene) (P3HT)/graphene nanocomposites were facilely prepared via an in situ reduction of modified graphite oxide (mGO) in the presence of P3HT. The chemical and aggregated structures of the P3HT/mGO nanocomposites were successfully characterized by means of atomic force microscope (AFM), transmission electron microscope (TEM), photoluminescence (PL), Raman spectra , X-ray photoelectron spectroscopy (XPS) and UV–vis measurements. Coated by P3HT, reduced modified graphite oxide (re-mGO) could significantly improve their processing problem in common organic solvent . It was shown that P3HT chains were attached to re-mGO sheets closely and there existed the pi–pi interaction between P3HT and re-mGO. The P3HT/mGO nanocomposites exhibited good dispersion in chloroform and show high storage stability (>20 days). This finding provides an efficient method for fabricating a light energy conversion materials with new optical and electrical properties, combining excellent mechanics, heat-stabilization properties of graphene and excellent optical, electrical, processing and film forming properties of soluble polythiophene materials.
研究领域:
材料科学
·
化学
✓ 已验证
DOI
高影响因子
FOOD CHEMISTRY
·
2020
·
IF 6.306
Aka Alla Martin,Essy Kouadio Fodjo,Gouli Bi Irié Marc,Trokourey Albert,Cong Kong
A rapid colorimetric method using cysteine-modified silver nanoparticles (Cys-AgNPs) is applied for the detection of 3-monochloropropane-1,2-diol (3-MCPD). Indeed, in the presence of 3-MCPD, the color of Cys-AgNPs solution changes from yellow to pink within five minutes at 100 °C and pH 9.3. This change is mainly attributed to the ability of amino group of cysteine to react with 3-MCPD to form N-(2,3-dihydroxypropyl)-amino acid grafted on AgNPs (3-MCPD-Cys-AgNPs) in alkaline medium. This color change makes 3-MCPD to be clearly detectable by unassisted visual means even at 0.1 μg⋅mL −1 . Besides, using UV–Vis spectroscopic technique, a linear range from 0.1 μg⋅mL −1 to 1.25 μg⋅mL −1 for 3-MCPD detection is obtained, with a calculated detection limit of 0.084 μg⋅mL −1 . These results suggest that this sensing technique is sensitive to 3-MCPD and may have a substantial application in the rapid detection of food contaminants particularly, where quality and safety of food products are paramount concern.
研究领域:
食品科学
·
分析化学
✓ 已验证
DOI
高影响因子
Toxics
·
2025
·Vol. 13
·期 4
·274
·
IF 4.1
Jie Gu,Huilin Jin,Jun Hu,Jian Wang,Daqiang Yin
Endocrine-disrupting chemicals (EDCs) are exogenous substances discharged into the environment through human activities. 3-Isopropylphenol, a typical alkylphenol-based EDC, has been extensively studied due to its broad application and potential ecological impacts. However, the mechanism of its neurotoxicity remains unclear. In this study, the neurotoxic effects of 3-isopropylphenol were examined using the zebrafish model. We predicted its potential toxic mechanisms and action targets using network toxicology and molecular docking and verified them via RT-qPCR. Results showed that 3-isopropylphenol exposure inhibits the cAMP/PKA signaling pathway in zebrafish larvae, promoting apoptosis, impairing neural development, and suppressing locomotor behavior. These findings enhance our understanding of the toxic effects and mechanisms of 3-isopropylphenol on zebrafish larval neural development and aid in evaluating its potential ecological hazards.
研究领域:
毒理学
·
环境科学
·
分子生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2025
·Vol. 31
·期 12
·e202403915
·
IF 3.7
Qi Pan,Wanliang Yang,Chen Wu,Dongjia Xie,Yuan Wang
Graphical A ploy(1,3-dioxolane) (PDOL) layer was constructed by a Al(OTf) 3 -induced in-situ solidification process between the interface of LATP and anode/cathode. The as-prepared PDOL as an “interfacial adhesive” can fill the gap between the LATP and the electrode, providing a better interfacial contact and reduced interfacial impedance. Such interfacial adhesive layer not only effectively prevents Li metal from reducing LATP but also provides intimate interface contact and limits unnecessary electron transport. Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) as the solid-electrolyte has attracted much attention for Li-ion batteries. However, the unstable LATP/Li interface and the insufficient contact between the anode/cathode and LATP usually lead to the structural collapse of LATP and the large solid–solid interfacial resistance for Li+ transport. Herein, a poly(1,3-dioxolane) (PDOL) adhesive layer was constructed by a Al(OTf) 3 -induced in-situ solidification process between the interface of LATP and anode/cathode. Such PDOL interfacial adhesive layer alleviates adverse reduction reactions at the LATP/Li interface and provides stable and well-contacted bilateral electrode interfaces. Benefitting from the PDOL interfacial adhesive, the Li|adhesive-LATP|Li symmetric cells achieve a current density up to 0.7 mA cm −2 and exhibit a good cycling stability for more than 2750 h at 0.1 mA cm −2 , and the Li|adhesive-LATP|LiFePO4 solid-state batteries with interface modification exhibit a capacity of 158 mAh g −1 at 0.2 C with a retention of 94 % after 100 cycles.
研究领域:
材料科学
·
电化学
·
能源存储
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2012
·Vol. 36
·期 6
·1335-1338
·
IF 2.605
Sa Huang,Jianhua Liu,Di Liu,Qinghai Yuan
We report the facile and scalable synthesis of a highly monodispersed inorganic nanostructure based on well-designed Gd(OH)3 nanorods. X-Ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), as well as energy-dispersive spectroscopy (EDS) were applied to characterize the samples, indicating that the nanomaterials with an average length of 100 nm and an average diameter of 15 nm showed a typical hexagonal phase. Biocompatibility tests were performed from in vitro cell experiments to in vivo long-term histological assessment, indicating that the Gd(OH)3 nanorods were promising for further bio-related application. Owing to the excellent paramagnetic behavior, we further investigated the capability of the nanorods as MRI contrast agent. Compared with the conventional Gd–DTPA complex, the well-designed Gd(OH)3 nanorods present a higher T1 relaxation rate, showing more potential for biomedicine applications.
研究领域:
材料科学
·
医学影像
·
生物医学工程
✓ 已验证
产品关联
DOI
高影响因子
THIN SOLID FILMS
·
2018
·
IF 1.939
Sanyin Qu,Yanling Chen,Wei Shi,Mengdi Wang,Qin Yao,Lidong Chen
Herein, we demonstrate a concept of making flexible thermoelectric (TE) generators by applying cotton thread as the platforms for poly(3-hexylthiophene) (P3HT) and Argentum (Ag) paste through selectable coating method. The coated thermoelectric cotton thread can be sewed on the flexible fabrics with different knitting pictures and form thermoelectric devices. The most important is that the temperature gradient of the device was in the direction of cross-plane of the flexible fabrics, that is, between the inner and outer surfaces of clothing, therefore the flexible device can be easily wore on the body since the temperature gradient between the human body and surrounding environment is in the cross-plane direction. The maximum output power of the device with thirteen P N type legs reached 1.15 μW at a temperature gradient of 50 K when the load resistance matched the resistance of the module. Cotton-based TE device coated with P3HT may be useful for the development of self-powered wearable electronics.
研究领域:
材料科学
·
电子工程
✓ 已验证
产品关联
DOI
高影响因子
TETRAHEDRON
·
2013
·
IF 2.803
Run-Lin Li,Gong-Qing Liu,Wei Li,Yu-Mei Wang,Lin Li,Lili Duan,Yue-Ming Li
3-Chloropiperidine compounds were obtained via Cu(II)-promoted one-pot intramolecular chloroamination of N -benzyl-4-penten-1-amines and subsequent rearrangement. The reaction conditions leading to this skeleton were studied, and the structure of the product was confirmed by NMR as well as X-ray diffraction experiments.
研究领域:
有机化学
·
药物化学
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2017
·
IF 7.504
Lei Chen,Yanming Zhao,Shenghong Liu,Long Zhao
Although the NASICON-type of Na3V2(PO4)3 is regarded as a potential cathode candidate for advanced sodium-ion batteries (SIBs), it has an undesirable rate performance and low cyclability, which are a result of its poor electronic conductivity. Here, we utilized conductive polyaniline (PANI) grown in situ to obtain the hard carbon-coated porous Na3V2(PO4)3@C composite (NVP@C@HC) with a typically simple and effective sol–gel process. Based on the restriction of double carbon layers, the NVP size decreases distinctly, which can curtail the sodium-ion diffusion distance and enhance the electronic conductivity. As expected, the product displays good discharge capacity (111.6 mA h g–1 at 1 C), outstanding rate capacity (60.4 mA h g–1 at 50 C), and remarkable cycling stability (63.3 mA h g–1 with a retention of 83.3% at 40 C over 3000 cycles). Also, it performs a long-term cycling capacity of 58.5 mA h g–1 exceeding 15 000 cycles at 20 C (with a capacity loss of 0.24% per cycle).
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SOLID STATE IONICS
·
2022
·
IF 3.699
Xu Zhang,Jinhua Wu,Shuqian Li,Yi Li,Xiaojie Li,Zhe Zhu,Jianlong Li
The vanadium-containing phosphate polyanion LiVPO 4 F has been attractive as a novel 4 V cathode for lithium-ion batteries. Herein, a hybrid cathode containing two active components of LiVPO 4 F and Li 3 V 2 (PO 4 ) 3 was successfully obtained by single-step solid-state reaction. The crystalline grains are coated by an amorphous carbon layer of about 8 nm thick. The composite presents reversible capacities of 102.8 and 98.2 mAh g −1 at the rates of 10C and 20C, respectively. Even at an ultrahigh rate of 100C (14.5 A g −1 ), it remains a discharge capacity of 70.1 mAh g −1 with a high average working potential of 3.5 V. After cycled 500 times at 10C, the obtained sample shows a capacity retention of 78.6%, implying outstanding cycling performance. The electrochemical impendence spectroscopy demonstrates that the hybrid cathode delivers higher lithium-ion diffusion coefficient . It is believed that the electrochemical performance is enhanced synergistically by the in-situ generated ionic conductor of Li 3 V 2 (PO 4 ) 3 . Finally, when charged and discharged at around 4.1 V, the intermediate phase of Li x VPO 4 F is clearly revealed by CV tests, which likely derives from a symmetry phase transform mechanism.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2017
·
IF 2.354
Zhi Zhou,Yiran Li,Mao Xia,Nan Zhou
In this paper, Li 1–x Ti 2 (PO 4 ) 3 /C composites (x = 0, 0.03, 0.05, 0.07) were synthesized by sol-gel approach, and the influence of Li vacancy on electrochemical performance of LiTi 2 (PO 4 ) 3 /C anode for aqueous rechargeable lithium battery was studied. Li vacancy hardly influences the crystal structure and morphology of the composite. Electrochemical measurement results demonstrated that Li 1–x Ti 2 (PO 4 ) 3 /C exhibited better performance compared with pristine LiTi 2 (PO 4 ) 3 /C, and Li 0.95 Ti 2 (PO 4 ) 3 /C has the best properties. Li 0.95 Ti 2 (PO 4 ) 3 /C delivered the discharge capacity of 104.3, 92.6, and 71.8 mAh g − 1 at 0.2, 5, and 20 C (1 C = 150 mA g − 1 ), 4.1, 27.3, and 34.4 mAh g − 1 larger than that of Li 0.95 Ti 2 (PO 4 ) 3 /C at corresponding rates, respectively. After 1000 cycles at 5 C, the discharge capacity retention for Li 0.95 Ti 2 (PO 4 ) 3 /C can reach 75.3%, 15.4% larger than that for LiTi 2 (PO 4 ) 3 /C. Our study reveals that Li vacancy is an efficient method to enhance the electrochemical properties of LiTi 2 (PO 4 ) 3 -based materials.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 48
·25183-25188
·
IF 3.708
Meihua Wang,Weifen Niu,Xin Wu,Lixia Li,Jun Yang,Shaomin Shuang,Chuan Dong
3-Mercaptopropionic acid (MPA)-capped ZnS:Cu/ZnS core/shell quantum dots (QDs) have been synthesized via a facile aqueous coprecipitation method and characterized by fluorescence, UV-Vis absorption, infrared spectroscopy and transmission electron microscopy. The fluorescence of ZnS:Cu/ZnS could be increased in the presence of uric acid (UA). The affecting factors for the fluorescence of ZnS:Cu/ZnS were examined including pH, temperature and reacting time. Under the optimized conditions, the fluorescence intensity of the ZnS:Cu/ZnS QDs against the UA concentration showed a linear response in the range of 0.66 μM to 3.3 μM with the correlation coefficient (R2) 0.9973 and the limit of detection 0.044 μM. Most relevant molecules and physiological ions had no effect on the detection of UA. The feasibility of the developed method was further demonstrated by determining the concentration of uric acid in human urine samples and the recoveries were 95% ∼ 103%. Our work provides a sensitive, selective and convenient fluorescence method to determine UA in real samples.
研究领域:
分析化学
·
纳米医学
·
生物传感器
·
临床检验
·
分子诊断
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）