文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2425至2436个,产品总数3,612个

切换升序
MOF
DIAMOND AND RELATED MATERIALS · 2026 · IF 5.2

Electrospun Co-MOF/polyacrylonitrile-derived cobalt nanoparticles supported carbon nanorods for peroxymonosulfate activated diclofenac degradation: Kinetics and mechanistic study

Rafi Ullah,Raza Ullah,Pervaiz Ahmad,Adeel Ahmed,Rizwan Ahmed Malik,Awais Khalid

The creation of efficient and resilient catalysts for advanced oxidation processes (AOPs) is crucial for the effective elimination of persistent pharmaceutical contaminants from wastewater. Cobalt metal–organic framework ( Co -MOF) was effectively incorporated into polyacrylonitrile (PAN) nanofibers using electrospinning and subsequently carbonized to produce cobalt nanoparticles supported on carbon nanorods (Co/CNRs). The customized catalyst, Co/CNR-2, demonstrated evenly dispersed cobalt nanoparticles, an increased surface area, and improved electrical conductivity, which collectively enabled rapid activation of peroxymonosulfate (PMS). The catalyst Co/CNR-2 exhibited remarkable catalytic effectiveness in the degradation of diclofenac (DCF), achieving almost 99% removal after 20 min using 0.5 g/L dose of catalyst, 1.0 mM PMS, and at pH 6.0, adhering to pseudo-first-order kinetics with a rate constant of 0.194 min −1 . Radical quenching and electron paramagnetic resonance (EPR) studies confirmed that sulfate radicals (SO 4 •- ), hydroxyl radicals (OH • ), and singlet oxygen ( 1 O₂) were the primary reactive species engaged in DCF breakdown. The catalyst demonstrated exceptional structural stability and reusability over five consecutive cycles, with negligible cobalt leaching. Furthermore, Co/CNR-2 has demonstrated considerable degradation efficiency for several drugs, highlighting its broad applicability. This study presents innovative insights into the rational design of MOF-derived carbon-based catalysts and recognizes Co/CNRs as a feasible and sustainable platform for the PMS-mediated degradation of emerging organic contaminants.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Foods · 2026 ·Vol. 15 ·期 7 ·1164 · IF 6

Crosslinked-AuNPs@CD-MOF Incorporated into PLA-Zein Composite Film with Humidity-Responsive Antimicrobial Release for Agaricus bisporus Preservation

Tahirou Sogore,Meimei Guo,Jin Huang,Xinyu Liao,Tian Ding,Mofei Shen

Foodborne pathogens cause hundreds of millions of illnesses annually, underscoring the urgent need for advanced antimicrobial food packaging materials. The objective of this study was to develop a crosslinked cyclodextrin metal–organic framework, loaded with gold nanoparticles (CL-AuNPs@CD-MOF) and integrated into a PLA-Zein composite film with humidity-responsive antimicrobial release, as a sustainable and high-performance packaging solution to address the critical limitations of conventional materials in controlling microbial contamination during food storage. Therefore, gold nanoparticles (AuNPs) were synthesized via a green approach using CD-MOFs as stabilizers and p-coumaric acid as a natural reducing agent, then crosslinked with diphenyl carbonate (DPC) to produce CL-AuNPs@CD-MOF. Crosslinking conditions were optimized to a CD-MOF:DPC ratio of 1:1, 1080 min reaction time, and 80 °C, preserving the cubic morphology and crystalline structure while transforming burst release into sustained antimicrobial activity againstE. coliandS. aureusover 7 days. Then, the incorporation of CL-AuNPs@CD-MOF into PLA-Zein films yielded a composite packaging material with favorable mechanical and barrier properties, including a water vapor transmission rate of 539.44 g/m2·24 h and an oxygen permeability of 235.90 cm3/m2·24 h·0.1 MPa. Progressive elimination ofE. coli,S. aureus, andL. monocytogenesover 7 days was confirmed, with antimicrobial efficacy originating exclusively from the CL-AuNPs@CD-MOF component. Application onAgaricus bisporusover 12 days of refrigerated storage demonstrated superior preservation performance: mushrooms inoculated withL. monocytogenesand packaged with CL-AuNPs@CD-MOF/PLA-Zein exhibited a weight loss of only 6.20 ± 2.06%, compared to 17.74 ± 3.15% for PLA-Zein and 41.50 ± 3.01% for PE controls. Color stability was equally improved, with lightness values of 71.46 ± 1.47 retained under CL-AuNPs@CD-MOF/PLA-Zein packaging, versus 58.37 ± 0.86 for PLA-Zein and 23.34 ± 2.34 for PE. Mushrooms inoculated withE. coliandS. aureusfollowed consistent trends. These results establish CL-AuNPs@CD-MOF/PLA-Zein as a promising multifunctional antimicrobial packaging platform for sustainable food preservation.

CAS / MDL: 25322-68-3
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY COMMUNICATIONS · 2026 · IF 5.9

An intrinsically pH-sensitive phosphazene based nickel MOF for high-efficiency tumor-targeted co-delivery of paclitaxel and curcumin

Sahresh Majeed,Yumo Liu,Guanghui Cui,Abdul Majid Khan,Muhammad Irslan Ilyas,Xiaodong Wang,Wei Liu,Zhanpeng Wu

The persistent challenges of multidrug resistance and systemic toxicity in cancer chemotherapy necessitate the development of intelligent, tumor-targeted co-delivery systems. Herein we report a novel nickel-based metal-organic framework (CUR + PTX@Ni-MOF) engineered with a phosphazene-derived ligand for the pH-responsive co-delivery of paclitaxel (PTX) and curcumin (CUR). The framework integrates a hexachlorocyclotriphosphazene (HCCP)-based linker featuring an intrinsically acid-labile P3N3 core enabling controlled degradation within the acidic tumor microenvironment (TME). The Ni-MOF exhibits a high BET surface area (177.118 m 2 /g) and a mesoporous architecture facilitating exceptional dual-drug loading capacities of 56.15% for CUR (96.3% encapsulation efficiency, EE) and 26.18% for PTX (43.01% EE). In vitro release studies demonstrated minimal drug leakage at physiological pH (7.4), while triggered, sustained release was achieved under acidic conditions (pH 6.5 and 5.0) with maximum cumulative releases of 75.42% for CUR and 49.35% for PTX at pH 5.0. Cellular assays confirmed high biocompatibility with normal LO2 hepatocytes (>80% viability) and potent, synergistic cytotoxicity against HeLa cancer cells driven by enhanced cellular uptake and apoptosis induction. This work establishes CUR + PTX@Ni-MOF as a promising, intrinsically pH-responsive platform for targeted and synergistic combination chemotherapy.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

A high-performance bimodal sub-nanoporous polyelectrolyte complex membrane for organic solvent nanofiltration constructed by MOF-reinforced nano-unit

Hui-Qian Huo,Bing-Xin Gu,Jin-Lin Wang,Jia-Chen Zhang,Kai Zhang,Ming-Jie Yin,Yan-Li Ji,Quan-Fu An

The development of high-performance organic solvent nanofiltration (OSN) membranes is essential for the sustainable purification of biological molecules and efficient catalyst recovery in the pharmaceutical industry. However, conventional polymeric OSN membranes are often constrained by the inherent trade-off between permeability and selectivity, as well as by solvent-induced swelling due to their poorly defined pore architectures. In this study, we propose rigid metal-organic framework (MOF) reinforced polymer nano-unit to construct bimodal sub-nanoporous polyelectrolyte complex membrane. Specifically, ZIF-8 crystals are grown under nano-confinement within a polyelectrolyte composite matrix, which concurrently modulates interfacial gaps between nanoparticles and reorganizes internal free volume elements. This approach yields a composite membrane featuring a rigid and hierarchically structured pore network. The optimized membrane achieves a remarkable methanol permeance of approximately 35.0 L m −2  h −1  bar −1 —representing a 2.9-fold enhancement—while maintaining precise molecular sieving for species larger than 1 nm. It also demonstrates outstanding operational stability over 200 h and proves effective in challenging separation applications, such as the purification of artemisinin. Furthermore, the proposed strategy has been successfully scaled up to fabricate a spiral-wound membrane module, achieving an energy saving of 99.16% in simulation trials. This work establishes a novel paradigm for the rational design of advanced OSN membranes through precise regulation of nano-scale structures.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL CROPS AND PRODUCTS · 2026 · IF 6.4

Valorization of Epimedium-derived icariin via magnetic MOF-immobilized naringinase: An efficient and reusable biocatalytic system for flavonoid modification

Haoyu Jia,Lingling Song,Tong Yan,Luran Wang,Jinyue Hu

Icariside I, a prenylated flavonol glycoside derived from Herba Epimedii , has attracted significant interest due to its enhanced bioavailability and pharmacological activities. Traditional methods for producing icariside I, including direct extraction and chemical hydrolysis of icariin, are limited by low yields, harsh conditions, and environmental issues. In this study, we developed a biocatalytic approach for the efficient conversion of icariin to icariside I using naringinase immobilized on magnetic metal-organic framework (MOF) nanoparticles (Nar@MOF) via EDC/NHS cross-linking. The Nar@MOF exhibited improved pH and thermal stability, as well as significant recyclability. Nar@MOF also demonstrated a lower K m value compared to the free enzyme, indicating enhanced substrate affinity. The biocatalyst enabled continuous icariside I production with 99.8% conversion and 98.3% yield within 4 h. Additionally, Nar@MOF maintained over 75% yield after ten consecutive cycles at 60 °C, highlighting its excellent stability and recyclability. Notably, Nar@MOF also exhibited broad substrate applicability. These results indicate that MOF-based immobilization offers a cost-effective and sustainable strategy for large-scale enzymatic conversion of icariin, with the magnetic MOF nanoparticles providing a versatile platform for high-value flavonoid production.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Singlet-oxygen-driven Bisphenol A Degradation via Efficient Peroxymonosulfate Activation by MOF-derived Porous MnO-Mn6N2.58/N-C Catalysts

Shenfei Li,Huihui Peng,Xiaoqiang An,Huachun Lan,Xuelian Yu

Nonradical oxidation via peroxymonosulfate (PMS) activation has attracted considerable attention for organic pollutant degradation, while the control and regulation of singlet oxygen ( 1 O 2 ) generation in catalytic oxidation are still challenging and the underlying mechanism remains ambiguous. In this paper, we synthesized a nitrogen-doped carbon-supported manganese-based catalyst by using ZIF-8 as a metal-organic framework (MOF) template for the in-situ loading of active components. When used for peroxymonosulfate activation, the MnO-Mn 6 N 2.58 /N-C catalyst exhibits a high Bisphenol A (BPA) degradation rate of 0.133   min -1 , exceeding PMS oxidation alone by 67 times. Mechanistic investigations reveal that the degradation process relies on the direct electron transfer from heterogeneous catalysts to PMS, contributing to efficient 1 O 2 generation for BPA degradation via a nonradical pathway. We demonstrate that Mn(II)/Mn(III) redox cycling on the catalyst surface activates PMS into superoxide (O 2 • - ), which in turn converts into 1 O 2 , thereby elucidating the underlying mechanism for high-efficiency degradation. This work provides a novel strategy to design heterogeneous Mn-based catalysts for recalcitrant organic wastewater remediation via a nonradical oxidation pathway.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2026 · IF 8.3

An informer-algorithm-assisted MOF-derived CuO nanoparticle/CeO2 nanorod heterostructure sensor for early rapid detection of CO leakage

Zongwei Liu,Hao Zhang,Xingyan Shao,Gongao Jiao,Zuozhe Ding,Xianhu Niu,Dongzhi Zhang

This study proposes a synergistic approach combining high-performance sensing materials with a deep learning prediction algorithm for accelerated detection. The metal-organic frameworks (MOFs)-derived CuO nanoparticles and CeO 2 nanorods were synthesized by co-precipitation and solvothermal methods. After annealing treatment, the CuO/CeO 2 nanocomposite was prepared by mechanical mixing. The successful synthesis of CuO/CeO 2 was confirmed by characterization techniques such as XRD, SEM, TEM, and XPS. The CuO/CeO 2 nanocomposite exhibited excellent CO sensing performance, including a low operating temperature (160°C), fast response and recovery times (100 ppm, 8 s/14 s), a low detection limit (1 ppm), high selectivity, as well as good repeatability and long-term stability. The excellent CO sensing performance is primarily attributed to the p-n heterojunction formed between CuO and CeO 2 , as well as the structure of CeO 2 nanorod, which effectively suppresses the aggregation of CuO nanoparticle. The sensing mechanism of the CuO/CeO 2 nanocomposite towards CO gas was further investigated through density functional theory (DFT) calculations. To improve signal quality and detection speed, the sliding window adaptive Kalman filter (SW-AKF) is adopted to suppress noise, and a time series prediction model is constructed based on the Informer architecture (using multi-head probabilistic sparse self-attention and self-attention distillation) to achieve advanced prediction of CO resistance signals.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2026 ·Vol. 14 ·期 3 ·122633 · IF 7.5

Synergistic defect engineering of Bi-MOF/Bi2O2[BO2(OH)] heterojunctions via UV-induced oxygen vacancies for efficient ciprofloxacin degradation

Xiaoxuan Li,Ying Lv,Jiaxin Du,Xuelian Chen,Meixia Xiao,Shubin Lei

Defect engineering coupled with heterojunction construction represents a pivotal strategy for optimizing the charge separation dynamics of photocatalysts. Herein, we report the fabrication of a novel Z-scheme heterojunction composed of bismuth-based metal-organic frameworks (NOTT-220) and layered Bi 2 O 2 [BO 2 (OH)] nanosheets via a hydrothermal approach. To further potentiate the photocatalytic activity, surface oxygen vacancies (OVs) were precisely introduced into the heterostructure through controlled ultraviolet (UV) irradiation. This defect-rich engineering strategy significantly broadened the visible-light absorption range and facilitated the separation of photogenerated carriers. Consequently, the optimized catalyst (OVs-BN-20) exhibited a superior photocatalytic reaction rate constant of 0.8133 min −1 , achieving 95.9% degradation rate of CIP within 2 h. Detailed mechanistic investigations, including liquid chromatography-mass spectrometry (LC-MS) and electron spin resonance (ESR), elucidated the degradation pathways and confirmed the synergistic role of superoxide radicals (·O 2 -) and photogenerated holes (h + ). This work not only provides a facile pathway for designing defect-modulated Z-scheme photocatalysts but also offers profound insights into the mineralization mechanisms of persistent antibiotic pollutants.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
LANGMUIR · 2026 · IF 4.4

Research on the Photothermal Conversion and Water Collection Performance of MOF-303 Composites for Solar-Driven Air Water Harvesting

Zhoujian An,Shangru Wu,Xiaoze Du,Yong Ding,Dong Zhang,Jian Fu,Xiaomin Liu

Atmospheric water harvesting is a promising solution to freshwater shortage because it is not limited by location. Metal–organic frameworks (MOFs) have attracted much attention for low-humidity applications due to their large surface areas and strong water adsorption capacities. In this study, the desorption efficiency of MOF-based adsorbents under solar heating was improved by adding efficient photothermal materials. MOF-303 was combined with Fe3O4, MWCNTs, and Ti3C2 by ball milling. Characterization analysis of the composite materials’ morphology, elemental distribution, crystal structure, and functional group changes demonstrated that the composite formation was successful. The results showed that compared to the original MOF-303, adding 10 wt % photothermal material greatly improved light absorption, leading to faster solar heating and quicker water desorption. However, the introduction of photothermal materials leads to a reduction in the effective adsorption sites within the composite materials, resulting in lower saturated water absorption capacities for all three composites compared to the original MOF-303. Among the three composite materials, Ti3C2/MOF-303 shows the best overall performance. Under 40% RH conditions, the material increased water vapor adsorption from 0 g/g to 0.382 g/g within 30 min. After 20 min of irradiation at 1 sun, the surface temperature of the material rapidly rose to 87.4 °C, reducing the remaining water content to 11.3%. Under the same conditions, the original MOF-303 had a water vapor adsorption of 0.42 g/g, a surface temperature of 59.8 °C after irradiation, and a remaining water content of about 31.7%. Taking 30% RH as an example, the Ti3C2/MOF-303 water vapor adsorption capacity is about 8.1% lower than that of the original MOF-303. During desorption at 85 °C, it takes approximately 20 min to achieve complete desorption, which is 20% shorter than that of the original MOF-303.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY · 2026 · IF 4.8

Synergistic integration of sensing and device-free photocatalytic degradation: All-in-one CuNCs@CS/MOF nanoplatform for 2-mercaptobenzothiazole

Xiaoye Wen,Chenjie Pang,Chenxi Dai,Zhefeng,Fan

As novel energy level-tunable photocatalysts, copper nanoclusters (CuNCs) have been used for combining with conventional catalysts to synergize enhanced the catalytic capabilities. However, conventional photocatalysts have their own drawbacks. In particular, their fixed energy levels are unfavorable for regulating the energy level structure of composite catalysts. In this study, a novel nanoplatform (CuNCs@CS/MOF) was constructed for the detection and photocatalytic degradation of MBT. The chitosan-modified CuNCs were encapsulated within the MOF matrix. The CuNCs maintained an aggregated state and the rotation of their ligands was restricted, thereby further enhancing the photoluminescence intensity and photostability of CuNCs. When exposed to light irradiation, CuNCs@CS/MOF showed remarkable photocatalytic activity, and the underlying mechanism governing the photocatalytic degradation process was elaborated in detail. Specifically, CuNCs@CS/MOF generated photogenerated electrons and holes, the photogenerated electrons reacted with H 2 O 2 to produce ·OH, while the remaining holes accepted electrons donated by MBT. The generated ROS oxidized TMB to oxidized TMB (oxTMB) under light irradiation, which was thereafter diminished by MBT. On this basis, the quantitative detection of MBT was established. Furthermore, ROS could oxidize and decompose MBT into small-molecule fragments, thus achieving the efficient elimination of MBT. This work provides an attractive strategy for designing multifunctional novel nanoplatform, which can be applied for the accurate detection and further harmless treatment of pollutants.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2026 · IF 5.2

Integrated smartphone-assisted dual-mode glucose biosensor based on GOx-loaded MOF-derived recyclable Nanozymes for portable diabetes monitoring

Shangyi Zhao,Wenlin Li,Kangjia Liu,Shuang Liu,Mengya Xu,Mengna Wan,Xiaolong Li,Haoxin Gong,Liuqing Cui,Xueqin Wang

The development of portable and highly sensitive sensing platforms is essential for point-of-care diabetes monitoring. The synergistic combination of nanocatalysts with natural enzymes offers a promising strategy for high-performance biomarker detection. Herein, we present a novel dual-mode biosensor for glucose detection that integrates colorimetric and fluorometric readouts into a smartphone-assisted analytical platform. This hybrid design overcomes the inherent instability of natural enzymes and the limited catalytic efficiency of conventional nanozymes through a rationally engineered hybrid nanozyme. The sensing platform was constructed by encapsulating natural glucose oxidase (GOx) within a stable metal-organic framework (MOF) grown on Fe 3 O 4 nanoparticle cores, yielding the composite designated as Fe 3 O 4 @MOF@GOx nanoparticles (FM@GOx NPs). The resulting nanocomposite exhibits enhanced catalytic performance through a synergistic cascade reaction mechanism. The cascade reaction product, oxidized TMB (oxTMB), effectively quenches the fluorescence of Rhodamine B isothiocyanate. Together with the intrinsic color change of oxTMB, this leads to distinct colorimetric and fluorometric shifts, enabling dual-mode detection. The biosensor demonstrates high sensitivity, excellent selectivity, and low detection limits of 0.4 μM (colorimetric) and 2.3 μM (fluorometric). Furthermore, the colorimetric signal is integrated with smartphone-based imaging analysis, wherein captured images are analyzed for their grayscale intensity for real-time glucose quantification. The hybrid nanozyme also shows remarkable stability and can be efficiently recycled multiple times without significant activity loss. The practical applicability was validated by accurately detecting glucose in serum samples from diabetic patients. This integrated and portable sensing platform represents a reliable and user-friendly strategy for diabetes monitoring outside conventional laboratory settings.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Interface-Programmed Growth of High-Aspect-Ratio 1D Ni–MOF Nanofibers on MXene for Wearable Enzyme-Free Glucose Sensing

Dandan Zhang,Hongjiang Li,Shushuai Zhu,Gajanan A. Bodkhe,Shoukun Yu,Chen Wang,Mulin Qu,Se Hyun Kim,Peng Liu,Xuan Li,Sang Woo Joo,Xinlin Li,Chenhao Cong

Noninvasive wearable glucose sensors capable of real-time sweat analysis offer a less discomforting alternative for long-term monitoring in patients with diabetes. However, practical implementation remains challenging. Major barriers include insufficient catalytic sensitivity to quantify the low glucose levels in sweat, limited compatibility between nanomaterial synthesis and scalable manufacturing processes, and the lack of a biofluid microenvironment suitable for enzyme-free electrochemical sensing. Here, we address these challenges by combining strong interfacial anchoring on a conductive template with surfactant-assisted growth control to engineer high-aspect-ratio (∼100) 1D Ni-TCPP MOF nanofibers as an active shell on MXene-NH2. In contrast to conventional electrospinning-assisted approaches, the resulting 1D MOF shell is polymer-template-free and thus avoids insulating scaffold components. The resulting fluffy, self-supporting Ni-MOF@MXene architecture is inherently compatible with printed electronics, enabling large-area fabrication of wearable enzyme-free glucose-sensing patches. To overcome the constraints of enzyme-free sensing in physiological biofluids, we further develop an integrated system that combines microfluidics with a NaOH/Nafion/PVA alkaline sustained-release membrane, establishing a localized alkaline microenvironment within sweat to enable continuous analysis.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。