JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2022
·Vol. 33
·期 9
·6168-6177
·
IF 2.779
Chen Pu,Zhao Zhihua,Shao Zhigang,Tian Ye,Li Bo,Huang Bo,Zhang Shuaiwen,Liu Chunbo,Shen Xiaoqing
Semiconducting nanomaterials with different sizes and shapes have wide applications in the field of electronics, and one of the key pathway to improve their performance is by recombination of different materials. In our innovative work, the nanocomposites of polypyrrole (PPy) and MXene were prepared by a simple in situ polymerization reaction. The samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The samples were made into sensors, and the gas sensitivities of the materials were investigated under different test conditions. The results showed that the response value of PPy/MXene-12 sensor to 100 ppm ammonia at room temperature was 2.38 times than that of pure PPy and 6.38 times than that of pure MXene. In addition, the sensor has excellent selectivity and low detection limit, which demonstrate the excellent practicability of them in the field of Internet of Things (IoT).
✓ 已验证
DOI
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2022
·Vol. 49
·期 1
·23-42
·
IF 3.134
Lin Yingzi,Hou Ao,Li Hao,Shi Chunyan,Chen Lei,Yuan Baoling,Liu Yi,Wang Yu,Liu Xiaochen
Dye wastewater with high concentration, large molecular weight, complex structure, and certain toxicity has brought a serious burden to the environment. In this study, acid red 73 dye (AR73) was used as the model pollutant to compare the degradation effects of different systems on AR73. The influence factors of a UV/hydrogen peroxide/peroxydisulfate (UV/H 2 O 2 /PDS) composite system, such as H 2 O 2 dosage, initial concentration of AR73, initial pH value, anion concentration, and actual water, on the degradation of AR73 were investigated. Compared with other systems, the UV/H 2 O 2 /PDS composite system had the best degradation effect of AR73, with a degradation efficiency of 98.98%, which conforms to the pseudo-first-order reaction kinetic model, the pseudo-first-order reaction kinetic constant ( k obs ) is 0.1339 min −1 . And the synergy coefficients in this complex system were all greater than 2. Specifically, the degradation efficiency of the UV/H 2 O 2 /PDS composite system for AR73 was the highest when the initial pH was neutral. The presence of anions inhibited the degradation of AR73, and the real water reduced the degradation efficiency for AR73. Electron spin resonance (ESR) detection and free radicals capture test demonstrated that hydroxyl radical ( · OH) was the main reactive species in AR73 degradation, and its 80.66–84.93% contribution. With the destruction of the structure of AR73 by free radicals, anilines, phenols, and oxalic acid were found to be the main intermediate products during the degradation of AR73 by gas-phase mass spectrometry and UV–vis spectrograms. The changes in toxicity during the degradation of AR73 by the UV/H 2 O 2 /PDS complex system were also assessed.
✓ 已验证
DOI
高影响因子
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2018
·Vol. 34
·期 3
·495-499
·
IF 1.248
Li Xianliang,Shi Zuosen,Cui Zhanchen,Zhu Song
Hollow mesoporous silica particles(HMSPs) were prepared by using polystyrene microspheres as a template and loaded with silver chloride(AgCl) to act as antibacterial agents. The HMSPs possess radially oriented pore channels and a high loading amount of AgCl. The AgCl loaded HMSPs were then dispersed in hybrid coatings with different mass ratios to fabricate antibacterial coatings. The antibacterial activities of the coatings were tested against Candida albicans (ATCC 10231) and Streptococcus mutants (ATCC 25175). The resulting antibacterial coatings exhibited high antibacterial activities, high hardness, and acceptable adhesion to the substrate.
✓ 已验证
DOI
高影响因子
Frontiers of Materials Science
·
2016
·Vol. 10
·期 2
·101-112
·
IF 1.354
Gao Shuang,Yuan Zhiguo,Xi Tingfei,Wei Xiaojuan,Guo Quanyi
Menisci are fundamental fibrocartilaginous organs in knee joints. The injury in meniscus can impair normal knee function and predisposes patients to osteoarthritis. This study prepared decellularized meniscus scaffolds using a 1% (w/w) sodium dodecyl sulfate solution and sufficient rinsing steps. Complete cell removal was verified by hematoxylin and eosin staining and DNA content assay. Decellularized menisci had accordant tension properties to intact ones, but with declined compression properties. This occurred because the collagen fiber was not damaged but glycosaminoglycans was significantly lost during the decellularization process, which was confirmed by biochemical assay and histology staining. In vitro cytotoxicity assay demonstrated that decellularized meniscus scaffolds have no toxicity on L929 murine fibroblasts and porcine chondrocytes. Further experiment showed that porcine chondrocytes could adhere and proliferate on the scaffold surface, and some cells even could infiltrate into the scaffold. All results showed the potential of this decellularized meniscus to be the scaffolds in tissue engineering.
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL MONITORING AND ASSESSMENT
·
2020
·Vol. 192
·期 6
·1-9
·
IF 1.903
Li Xuguang,Elgarhy Abdelbaky Hossam,Hassan Mohamed Elfatih,Chen Yanbo,Liu Guanglong,ElKorashey Reham
Existing research on phosphorus removal from wastewater mostly focused on inorganic phosphorus while ignoring organic phosphorus, which has potential bioavailability. This study aims to provide an innovation for the development of advanced treatment material for both inorganic and organic phosphorus removal in water. In this study, ferrihydrite loaded on the graphene oxide (FeOOH-GO) composite adsorbent was synthesized by surface precipitation method, and its ability to remove both phosphate and diazinon as forms of inorganic and organic phosphorous from water was investigated. Characterization of the loaded composite using X-ray diffraction (XRD), scanning electron microscope (SEM), and Fourier transform-infrared spectroscopy (FTIR) indicated that FeOOH was successfully loaded onto graphene. The results of batch adsorption experiments showed that the adsorbent could remove both inorganic and organic phosphorus compounds simultaneously from water. When FeOOH content is 40%, the equilibrium adsorption amount of FeOOH-GO composite adsorbent for phosphate and diazinon was 5.81 and 23.20 mg g −1 , respectively. Environmental parameters such as pH and initial concentration have important influence on phosphorus removal by FeOOH-GO composite adsorbent and the removal efficiency of the inorganic and organic phosphorus from water decreases by increasing the initial concentration of phosphate and diazinon and the pH. It was concluded that the FeOOH-GO composite adsorbent has great potential to remove both inorganic and organic phosphate simultaneously from contaminated water.
✓ 已验证
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2020
·Vol. 27
·期 14
·16484-16495
·
IF 3.056
He Xingyu,Min Xiaobo,Peng Tianyu,Ke Yong,Zhao Feiping,Sillanpää Mika,Wang Yunyan
Ball-milling is considered as an economical and simple technology to produce novel engineered materials. The ball-milled microscale zero valent iron/pyrite composite (BM-ZVI/FeS 2 ) had been synthesized through ball-milling technology and applied for highly efficient sequestration of antimonate (Sb(V)) in aqueous solution. BM-ZVI/FeS 2 exhibited good Sb(V) removal efficiency (≥ 99.18%) at initial concentration less than 100 mg Sb(V)/L. Compared to ball-milled zero valent iron (ZVI) and pyrite (FeS 2 ), BM-ZVI/FeS 2 exhibited extremely higher removal efficiency due to the good synergistic adsorption effect. BM-ZVI/FeS 2 showed efficient removal performance at broad pH (2.6–10.6). Moreover, the coexisting anions had negligible inhibition influence on the Sb(V) removal. The antimony mine wastewater can be efficiently remediated by BM-ZVI/FeS 2 , and the residual Sb(V) concentrations (< 0.96 μg/L) can meet the mandatory discharge limit in drinking water (5 μg Sb/L). Experimental and model results demonstrated that endothermic reaction and chemisorption were involved in Sb(V) removal by BM-ZVI/FeS 2 . The XRD and XPS analyses confirmed that the complete corrosion of ZVI occurred on BM-ZVI/FeS 2 after Sb(V) adsorption, resulting in the enhanced Sb(V) sequestration. Mechanism analyses showed that the excellent removal performance of BM-ZVI/FeS 2 was ascribed to the high coverage of iron (hydr)oxide oxidized from ZVI. Because of the advantages of economical cost, high Sb(V) removal capacity and easy availability, BM-ZVI/FeS 2 offers a promising adsorbent for Sb(V) remediation.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
·
2021
·Vol. 329
·期 2
·1125-1133
·
IF 1.371
Wu Fan,Zhang Zhibin,Cheng Zhongping,Zhou Runze,Lin Yuling,Liu Yuhui,Wang Youqun,Cao Xiaohong,Liu Mingguang,Liu Yunhai
The photocatalytic reduction of soluble \({\text{UO}}_{2}^{2 + }\) from radioactive wastewater is becoming an effective method to reduce radioactive pollution, while available catalysts are considerable limitation. Herein, the ZnS@g-C 3 N 4 (ZSGCN) heterojunctions complexes were compounded as catalysts to reduce \({\text{UO}}_{2}^{2 + }\) . The results from TEM, XRD, XPS, EIS, DRS and PL showed that the ZnS nanoparticles combined with graphite carbon nitride (GCN), which is the construction of heterojunctions broadened the absorption range of sunlight. The ZSGCN-5 presented the optimal photocatalytic reduction activity to \({\text{UO}}_{2}^{2 + }\) , which was 4.34 times than that of pristine GCN. The ZSGCN-5 heterojunction becomes a promising photocatalyst for radioactive environment remediation.
✓ 已验证
DOI
高影响因子
International Journal of Industrial Chemistry
·
2020
·Vol. 11
·期 2
·133-145
·
IF 0
Mpelwa Musa,Tang Shanfa,Jin Lijun
Mineral scale deposit is one of the major problems incessantly faced in the oil and gas producing wells and surface facilities, and if not well-handled can cause an unsuccessful petroleum production. To eradicate scale deposits, scale inhibitors (SIs) are commonly deployed into industrial water systems. Because of effectiveness and long squeeze lifetimes, organic phosphonate SIs are extensively used for preventing mineral scale formation in industrial water systems. However, they usually exhibit lower Ca 2+ and Mg 2+ tolerances that restrict their applications in harsh conditions where high inhibitory dosages are needed. In this paper, a multifunctional aminoalkylenephosphonate-based antiscalant having higher Ca 2+ and Mg 2+ tolerances is studied. The antiscalant was synthesized, characterized (FTIR and NMR spectroscopies), and evaluated in accordance with the NACE Standard Method (TM0374) for preventing CaSO 4 and CaCO 3 formation in the petroleum industry. The effects of inhibitory dosages, water hardness, temperature, incubation period, and pH were studied. We further tested the performance of the antiscalant in simulated field waters. Experimental results show that the multifunctional aminoalkylenephosphonate-based antiscalant has better inhibitory properties as compared to conventional aminoalkylenephosphonate-based SIs. The incorporation of the sulfonate group into the molecule significantly improved the solubility of the antiscalant and hence its tolerances to Ca 2+ and Mg 2+ ions. Also, it bolstered thermal stability of the inhibitor. The results from simulated field conditions are promising. The synthesized antiscalant performed superbly than the conventionally aminomethylenephosphonate antiscalants where Ca 2+ and Mg 2+ concentrations are challenging.
✓ 已验证
DOI
CATALYSIS LETTERS
·
2018
·Vol. 148
·期 9
·2765-2776
·
IF 2.911
Chang Libin,Zhu Gangqiang,Lu Huan,Hojamberdiev Mirabbos,Zhang Zengping,Gao Jianzhi,Wang Chenghui,Yang Woochul
Abstract The Ag 2 S/CdS composite photocatalyst with a leaf-like structure was synthesized by loading the Ag 2 S nanoparticles on the surface of the hydrothermally synthesized CdS particles. The UV–Vis–NIR absorption spectroscopy results reveal that the Ag 2 S/CdS composite photocatalyst exhibits a wide-spectrum response from ultraviolet (UV) to near-infrared (NIR), demonstrating its potential for effective utilization of solar energy. The scanning and transmission electron microscopic observations show that Ag 2 S nanoparticles with the size of about 20 nm are successfully embedded on the surface of leaf-like structure of CdS. Among the samples loaded with different molar percentages of Ag 2 S nanoparticles, the 5%-Ag 2 S/CdS composite photocatalyst exhibits a higher photocatalytic efficiency than the individually synthesized CdS and Ag 2 S for the degradation of Rhodamine B (RhB) and methyl orange (MO) under LED visible light irradiation. Furthermore, the 5%-Ag 2 S/CdS composite photocatalyst also exhibits a photocatalytic activity for the degradation of RhB under 850 and 940 nm monochromatic light irradiation. The results of the photocatalytic activity tests performed with various scavengers confirm that ·O 2 − plays a key role in the photodegradation of RhB. An enhanced photocatalytic performance of the Ag 2 S/CdS composite photocatalyst is directly attributed to the formation of a heterojunction between Ag 2 S and CdS. The developed composite photocatalyst can harness a greater share of the solar spectrum from visible to near infrared region and generate the photoinduced charge carriers more efficiently. Graphical Abstract
✓ 已验证
DOI
高影响因子
Chemical and Biological Technologies in Agriculture
·
2023
·Vol. 10
·期 1
·1-14
·
IF 6.6
Zhou Shiyang,Huang Gangliang
In recent years, the biological activity of plant polysaccharides has attracted more and more attention. Juglans regia was one of the four-dry fruits in the world, it has very high value in nutrition and health care value was very high. To better develop the nutritional and health effects of the J. regia shell polysaccharide, J. regia shell was used as raw material to prepare polysaccharide by the water extraction and alcohol precipitation method. The molecular weight, monosaccharide components, molecular structure characteristics and antioxidant activities of its derivatives were studied. Then, a series of meaningful data information for the study of the J. regia shell polysaccharide and its derivatives were obtained. The molecular weight of the polysaccharide was 9.45 × 10 4 Da after the separation and purification by DEAE-52 and Sephadex G-100. The polysaccharides contained rhamnose, arabinose, galactose, glucose, xylose and galacturonic acid, and the molar ratio of each monosaccharide component was 6.7%: 16.5%: 28.3%: 11.2%: 12.5%: 24.8%. The molecular structure of J. regia shell polysaccharide contains β-glucoside bond, its structure may be → 4)- α -D-Gal p -(1 → 4)- β -D-GalAp-(1 → 4)- α -D-Xyl p -(1 → glycosidic bond). The study of antioxidant activity, J. regia shell polysaccharide and its derivatives showed good biological activities, especially the phosphorylated J. regia shell polysaccharide. The study of J. regia shell polysaccharide has important practical significance for improving the quality and efficiency of the J. regia industry chain. Graphical Abstract
✓ 已验证
DOI
高影响因子
Frontiers of Environmental Science & Engineering
·
2022
·Vol. 16
·期 8
·1-11
·
IF 6.048
Dong Lei,Xie Pin,Zhang Xin,Qiao Junlian,Rao Dandan,Sun Yuankui,Guan Xiaohong
The permanganate (Mn(VII)) oxidation has emerged as a promising technology for the remediation and treatment of the groundwater and surface water contaminated with the organic compounds. Nonetheless, only a few studies have been conducted to explore the role of the heavy metals (especially the redox-active ones) during the Mn(VII) oxidation process. In this study, taking Pb(II) as an example, its influence on the Mn(VII) decontamination performance has been extensively investigated. It was found that, with the presence of Pb(II), Mn(VII) could degrade diclofenac (DCF), 2,4-dichlorophenol, and aniline more effectively than without. For instance, over a wide pH range of 4.5–8.0, the dosing of 10 µmol/L Pb(II) accelerated the DCF removal rate from 0.006–0.25 min −1 to 0.05–0.46 min −1 with a promotion factor of 1.9–9.4. Although the UV-vis spectroscopic and high resolution transmission electron microscopy analyses suggested that Mn(VII) could react with Pb(II) to produce Mn(IV) and Pb(IV) at pH 6.0–8.0, further experiments revealed that Pb(II) did not exert its enhancing effect through promoting the generation of MnO 2 , as the reactivity of MnO 2 was poor under the employed pH range. At pH below 5.0, it was interesting to find that, a negligible amount of MnO 2 was formed in the Mn(VII)/Pb(II) system in the absence of contaminants, while once MnO 2 was generated in the presence of contaminants, it could catalyze the Pb(II) oxidation to Pb(IV) by Mn(VII). Collectively, by highlighting the conversion process of Pb(II) to Pb(IV) by either Mn(VII) or MnO 2 , the reactive Pb(III) intermediates were proposed to account for the Pb(II) enhancement effect.
✓ 已验证
DOI
高影响因子
IONICS
·
2022
·Vol. 28
·期 10
·4599-4610
·
IF 2.961
Zheng Weiguo,Nie Shuqing,Chen Kaiyi,Li Rui,Qin Yao,Xiao Wei
Novel nitrogen–doped carbon (NC) coating encapsulating block-like Sn/SnO 2 (Sn/SnO 2 @NC) composite powders are successfully synthesized via hydrothermal, sol–gel, and subsequent heat treatment processes, which are characterized by XRD, SEM, thermogravimetric, Raman, and XPS. The results indicate that the Sn/SnO 2 @NC-2 composite powders are uniformly distributed in the NC matrix in the presence of 7.000 g of acrylamide. Moreover, the Sn/SnO 2 @NC-2 composite powders deliver high initial discharge specific capacity of 1132 mAh g −1 and decent capacity of 471.4 mAh g −1 after 100 cycles at 100 mA g −1 when the composite powders are evaluated as anode materials for lithium-ion batteries. The improved electrochemical performance of Sn/SnO 2 @NC-2 is mainly ascribed to the NC coating that can relieve the volume expansion and provide multiple charge transfer channels for electrons to consolidate the structural stability and promote the electronic conductivity of the Sn/SnO 2 anode materials, respectively. Therefore, the Sn/SnO 2 @NC-2 composite powders can be a promising and attractive anode material for lithium-ion batteries.
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）