JOURNAL OF MOLECULAR STRUCTURE
·
2024
·
IF 4
Jian-Wei Zhang,Ya Chen,Yong-Ya Zhang,Wei Wei
In this work, by utilizing an X-type tetracarboxylate ligand (1,2,4,5-tetrakis(4-carboxyphenyl)benzene, H 4 TCPB), a novel Mn-organic framework, namely, [(CH 3 CH 2 ) 2 NH 2 ] 2 [Mn(TCPB)(H 2 O) 2 ] ( SQNU-25 , SQNU = Shangqiu Normal University), was prepared under a DEF/HAc solm. Due to the structural advantage of SQNU-25 , the Ln 3+ ions (Eu 3+ and Gd 3+ ) have been successfully introduced into the framework by post-synthetic modification. The result of the energy levels of the H 4 TCPB ligand and Eu 3+ ion shows that the H 4 TCPB ligand as a chromophore can effectively sensitize Eu 3+ ions. Moreover, the Eu@SQNU-25 not only shows a typical Eu 3+ ion red emission but also exhibits good temperature sensing in the wide temperature range (80 to 300 K).
✓ 已验证
产品关联
DOI
高影响因子
ChemNanoMat
·
2024
·Vol. 10
·期 8
·e202400240
·
IF 2.6
Xuetong Xu,Xu Jia,Cong Liu,Jiaolong Qiao,Fuying Wang,Liuxue Zhang,Dan Yang,Yuan Zhang,Xiulian Wang
The photocatalytic hydroxylation of benzene to phenol is an important reaction for the synthesis of fine chemicals and pharmaceuticals. However, the development of efficient and selective photocatalysts for this reaction remains a challenge. Here, a highly active and selective Fe-MOF/2D-montmorillonite (Fe-MOF/MMT) photocatalyst was prepared via an in-situ method for the hydroxylation of benzene to phenol under the visible light irradiation. The Fe-MOF/MMT composite exhibited excellent photocatalytic performance, with phenol yield of 30.3 % and benzene selectivity of 96.5 % within 4 hours. The high activity and selectivity of the Fe-MOF/MMT photocatalyst were attributed to the synergistic effect between the Fe-MOF and MMT, as well as the unique 2D structure of MMT, which facilitated charge separation and transfer. The Fe-MOF/MMT composite also showed good stability and re-used without significant decrease of activity. This study demonstrated that the potential of Fe-MOF/MMT as a highly efficient and selective photocatalyst for the hydroxylation of benzene to phenol and provided an insight into the design of advanced photocatalysts for sustainable chemical synthesis.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Jiachen He,Jianjun Wu,Jingcheng Zheng,Yidan Xu,Keyun Li,Siwei Yin,Yanyun Liu,Yuelin Hu,Chaoming Xie,Limin Cai,Yikuan Du,Xiong Lu
Inflammation and cartilage degeneration are critical challenges in osteoarthritis (OA) treatment. Achieving sustained drug efficacy while mitigating the adverse effects of inflammation and reactive oxygen species remains a significant challenge. This study synthesizes a gallic acid-magnesium (GA-Mg) metal–organic framework (MOF) as a drug carrier for puerarin (PA). The PA-loaded GA-Mg MOF (pGM) is encapsulated within chondroitin sulfate methacrylate, forming monodisperse hybrid microspheres (CM@pGM) under ultraviolet light using microfluidic technology. The pGM is physically confined within the microspheres through a network of structural obstructions and noncovalent interactions. During degradation, GA and Mg2+ ions release from pGM, improving the inflammatory microenvironment of the articular cavity and mitigating oxidative stress. The sustained release of Mg2+ and PA supports chondrocyte anabolism and facilitates cartilage repair. In vitro studies confirm that injectable microspheres extend the drug release period to over 2 weeks. In vivo experiments demonstrate that CM@pGM significantly reduces osteophyte formation, alleviates degenerative changes in articular cartilage, and delays OA progression. In conclusion, CM@pGM, as a drug delivery platform that ameliorates the inflammatory microenvironment, alleviates oxidative stress, and promotes cartilage repair, holds significant potential for OA treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2024
·
IF 6.7
Yanping Xia,Feng Shi,Ruixin Liu,Haibing Zhu,Kai Liu,Chuanli Ren,Juan Li,Zhanjun Yang
Designing a metal–organic framework (MOF)-derived nanozyme with highly dispersed active sites and high catalytic activity as well as robust structure for colorimetric biosensing of diverse biomolecules remains a substantial challenge. Here, an MOF-derived highly dispersed and pure α-cobalt confined in a nitrogen-doped carbon nanofiber (α-Co@NCNF) nanozyme with superior glucose oxidase (GOD)- and peroxidase (POD)-like activities was constructed for colorimetric assay of multiple biomolecules. Specifically, the α-Co@NCNF nanozyme was synthesized, utilizing in situ electrospinning Co-MOFs into polyacrylonitrile nanofiber (PAN) followed by a pyrolysis process. Taking advantage of the in situ electrospinning strategy, the α-Co nanoparticles were confined in continuous porous NCNF to restrict the growth and prevent the aggregation and oxidation during the pyrolysis process. The resulting special structure considerably improved the enzyme-like performance. A series of experiments validate that the enzyme-like activity of the α-Co@NCNF nanozyme was superior to that of Co@CoO@NCNF (derivatives from Co-MOFs grown on the surface of PAN nanofiber) and nature enzymes. Furthermore, α-Co@NCNF nanozyme-based colorimetric biosensing was developed for monitoring glucose, hydrogen peroxide (H2O2), and glutathione (GSH) and the corresponding linear ranges are 0.1–50 and 50–900 μM and 5–55 and 0.1–20 μM accompanied by the corresponding low detection of 0.03, 1.66, and 0.03 μM. The proposed method for the construction of α-Co@NCNF nanozyme with dual enzyme-like properties provides a new insight for designing novel nanozymes and has prospects for application in colorimetric biosensing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ANALYTICAL CHEMISTRY
·
2024
·
IF 6.7
Ziyi Mi,Youyuan Xia,Huo Dong,Yuhang Shen,Ziyou Feng,Yawen Hong,Haoyu Zhu,Binfeng Yin,Zhengping Ji,Qin Xu,Xiaoya Hu,Yun Shu
Wearable sensors enable the noninvasive continuous analysis of biofluid, which is of great importance for healthcare monitoring. In this work, a wearable sensor was seamlessly integrated with a microfluidic chip which was prepared by a three-dimensional printing technology for noninvasive and multiplexed analysis of metabolite and electrolytes in human sweat. The microfluidic chip could enable rapid sampling of sweat, which avoids the sweat evaporation and contamination. Using a Zn metal–organic framework as a sacrificial template, the hexagonal rod-shaped porous carbon nanorod (PCN) with high porosity, a large specific surface area, and excellent conductivity was synthesized and exhibited the robust electrocatalytic ability of uric acid (UA) oxidation. Therefore, the PCN-based sensor showed high sensitivity and good selectivity of UA with a wide linear range of 10–200 μM and a low detection limit of 4.13 μM. Meanwhile, the potentiometry-based ion-selective electrode was constructed for detection of pH and K+, respectively, with good sensitivity, selectivity, reproducibility, and stability. In addition, the testing under different bending states demonstrated that mechanical deformation had little effect on the electrochemical performance of the wearable sensors. Furthermore, we evaluated the utility of the wearable sensor for multiplexed real-time analysis of UA, pH, and K+ in sweat during aerobic exercise, and the effect of the amount of consumed purine-rich foods on uric acid metabolite levels in sweat and urine was further investigated. The relationship between urine UA and sweat UA was obtained. Overall, this wearable sensor enables multiple electrolyte and metabolite analysis in different noninvasive biofluids, suggesting its potential application in personalized disease prevention.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2024
·
IF 7.1
Shudi Yu,Nannan Zhang,Jie Li,Jiongting Yin,Yong Wang,Zhengying Wu,Yangping Zhang,Yukou Du
A metal–organic framework (MOF) embedded by transition metal sulfide (TMS) particles is one of the promising electrocatalyst candidates for overall water splitting (OWS) due to the large surface area and abundant active sites from the MOF precursor, as well as the tunable electronic structure and higher intrinsic conductivity of TMS. More importantly, its self-restructuring under alkaline conditions will lead to the chemical composition and phase evolution of the catalyst surface, which is the source of its further enhanced catalytic activity. A semi-MOF (labeled as Co@Ni/Fe-MS/MOF) with MOF as the semisacrificial template and a TMS particle as the guest was designed by exercisable and universal heteroatomic Co doping and partial vulcanization. The TMS/MOF heterostructure establishes an ideal bridge for electron transfer. Simultaneously, the dopant Co and the synergistic effect of multiple metal sites also effectively regulate the charge environment around the catalytic sites, which jointly improve the adsorption/desorption kinetics of the reaction intermediates. As a result, Co@Ni/Fe-MS/MOF exhibits a distinguished overpotential (η10 = 229 mV for OER, η10 = 174 mV for HER) and Tafel slope (52.37/114.35 mV dec–1 for OER/HER), as well as unrivaled long-term durability (80 h for OWS). Moreover, the two-electrode Co@Ni/Fe-MS/MOF ∥ Co@Ni/Fe-MS/MOF cell illustrates a small cell voltage of 1.54 V to achieve a power of 10 mA cm–2. Impressively, this superior OER property comes from the three-layer sandwich structure restructured by the hybrid semi-MOFs in the alkaline environment as the true active sites. This work aspired to regulate the electronic structure of the catalyst, induce synergistic effects, and shed light on the preparation of hybrid semi-MOF materials by heterogeneous interface engineering, doping engineering, and phase evolution.
✓ 已验证
产品关联
DOI
高影响因子
INORGANIC CHEMISTRY
·
2025
·
IF 4.7
Linbo Deng,Shuya Xue,Li Li,Rongrong Huang,Pingying Xie,Jiawei Liu,Linyu Wang,Xiaoqiang Wang,Xuemin Duan,Limin Lu
Metal–organic framework (MOF)-derived carbon materials are commonly used as sensing materials, but their limited accessibility to active sites and specific surface area restrict their applications. In this study, we proposed a simple method involving facile tannic acid etching and calcination to create NiCo-embedded hollow N-doped carbon nanocubes (NiCo@HNC) using MOFs as sacrificial templates. The resulting NiCo@HNC material has a large specific surface area, improved mass transport channels, and enhanced exposure of electroactive sites due to its unique hollow structure and high porosity, leading to enhanced electrocatalytic activity. Moreover, with the utilization of NiCo@HNC as a substrate material and dopamine as a functional monomer, a ratiometric molecularly imprinted electrochemical sensor was developed for the selective and sensitive detection of carbendazim (CBZ). This sensor demonstrated a wide linear range of 0.0003–10 μM and a low detection limit of 0.1 nM. In addition, the sensor was utilized for the accurate quantification of CBZ in actual carrot/strawberry samples with a recovery range of 96.0–103.0%, indicating its potential for practical application.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMISTRY-A EUROPEAN JOURNAL
·
2024
·
IF 3.9
Jieli Guo,Mengli Ye,Xiujing Xing,Yaokang Lv,Wei Xiong,Hao Li
A series of CoFe2O4 materials derived from metal-organic framework were successfully constructed by the solvent-thermal method. The morphology of a typical sample CoFe2O4-1 was mostly in the form of a cubic rod-like structure with a size distribution of 3.2 ± 0.2 μm, while a small amount of the structure presented hexagonal shape with uniform size dispersion. The XPS characterization results confirmed that the CoFe2O4-1 material contained Co3+ (Co2+/Co3+ = 0.98), and the redox reaction between Co2+ and Fe3+ produced more Fe2+ (Fe2+/Fe3+ = 1.63), leading to the production of more OV on the surface of the CoFe2O4-1 material (OV% = 0.34), thereby facilitating the efficient adsorption of the efficient adsorption of heavy metal ions (HMIs). CoFe2O4-1/GCE as a typical electrode presented excellent performance for the detection of multiple HMIs. The results should be attributed to the good electrical conductivity and large electrochemically active surface area of CoFe2O4-1/GCE, accelerating the transport of ions and charges in the system. Interestingly, there are interaction mechanisms between the HMIs when performing simultaneous detection, suggesting the detection of target ions can be facilitated by adding additional ions. This study provides new research insights for the development of highly sensitive electrochemical sensors for real-time environmental monitoring.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Yujie Pan,Peini Zhao,Weili Cai,Hehe Fang,Xiaoru Wang,Junyu Zhao,Peihua Zhu,Hongmei Yang,Shenguang Ge,Jinghua Yu
Carbaryl is a broad-spectrum carbamate fungicide that may pose a threat to ecosystems and human health. To prevent and control the harm caused by excessive application of carbaryl, a full-dimensional divergence effect SERS sensor has been constructed. Biodegradable paper chips were used as sensor substrates. ZIF-8 with structural flexibility was grown in situ on carbon paper. A rough silver layer with surface like metal etching was clad outside the ZIF-8. Artificial antibody (AAB) with accurate grasping ability was polymerized on the surface of ZIF-8@Ag paper substrate. Au@Ag CSNPs were decorated on the AAB to provide abundant “hot spots”. Every functional material layer works together to form a gap and tip region with superior plasmon resonance. The proposed SERS sensor realizes the rapid and accurate on-site screening and localization of carbaryl in food with good correlation responded in the range of 0.01–20 μg·mL −1 and a low detection limit of 5.72 × 10 –3 μ g·mL −1 .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2025
·
IF 9.7
Xinsheng Cheng,Zhihao Wang,Ligang Xia,Junxi Zhang,Yulin Min,Qiang Wu,Qunjie Xu
The low electrocatalytic activity of pristine graphite felt (GF) electrodes towards V(II)/V(III) and V(IV)/V(V) redox couples poses a significant challenge in vanadium redox flow batteries (VRFBs). Here, Metal-organic frameworks (MOFs) containing Cu, Co, N, and S are proposed as precursors for the construction of metal and nonmetal co-doped GF electrodes, which exhibit enhanced catalytic activity compared to pristine GF electrodes. The synergistic effect of the metal and nonmetal components results in the N,S/Cu,Co@GF electrode exhibiting increased hydrophilicity, electrochemical reactivity, and reversibility. The modified GF electrode enabled the VRFB to achieve an energy efficiency of 76.2 % at a current density of 200 mA/cm 2 , representing a 10.9 % improvement over the pristine GF. Even at a higher current density of 300 mA/cm 2 , the energy efficiency remained at 65.7 %. Furthermore, the N,S/Cu,Co@GF electrodes demonstrated desirable long-term stability over 350 consecutive charge/discharge cycles at a current density of 200 mA/cm 2 . Density functional theory further elucidates the potential catalytic mechanism of metal and nonmetal co-doping in vanadium redox reactions. The findings demonstrate that MOF-derived metal and nonmetal co-doping is an effective strategy for developing high-efficiency VRFB electrodes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Xue Bai,Liyin Bu,Yongqiang Du,Quan Wang
Owing to the internal correction function and good resistance to complex factors, dual-signal electrochemical sensors have abilities to avoid false positives. In this work, Cu-MOF and MnCO 3 were combined and further prepared the Cu 2+ and Hg 2+ dual-signal electrochemical sensor for ultra-sensitive detection of Hg 2+ . Notably, beyond the commonness of the general MOFs, Cu-MOF could undergo oxidation–reduction to provide an internal reference signal. MnCO 3 , a porous structure with good electrocatalysis, exhibits an obvious signal amplification effect on the detection of Hg 2+ . Differential pulse voltammetry was applied for the detection of Hg 2+ . The current signal of Cu 2+ and Hg 2+ reduced regularly with Hg 2+ concentration decreased. Under optimized conditions, the LOD of Hg 2+ was calculated around 6.82 nM with a linear range of 0.10 ∼ 2.50 μM. The proposed sensor was proven to show satisfactory anti-interference, stability, and reliability, which is promising for the ultra-sensitive detection of Hg 2+ in real life.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2024
·
IF 8.5
Yaqi Yu,Dilong Hong,Zeyu Zhu,Yuliang Jiang
Food safety issues are becoming increasingly prominent, raising public concern. Antibiotic pollutants, as a unique category, act like a double-edged sword. On one hand, they provide precise treatment for related diseases, but on the other hand, their excessive use or improper handling can lead to environmental contamination or entry into the biological chain. This makes it easy for living organisms to come into contact with and ingest these pollutants, leading to serious consequences. Among these antibiotics, Levofloxacin (LVF), a broad-spectrum antibacterial agent, effectively treats various bacterial infections but also causes severe problems due to its misuse. Therefore, developing a simple, fast, and efficient probe for detecting LVF is crucial for environmental protection and human safety. In this study, a novel UiO-66-F 4 fluorescent probe was synthesized. This probe demonstrated dual-channel detection of LVF through its inner filter effect (IFE) and chemical interactions, resulting in a visible color change from colorless to green. It exhibits good linear ranges at the fluorescence peaks of 494 nm (30–68 μM), with a detection limit of 0.1 μM. Based on its excellent detection performance, the probe was further applied for the quantitative determination of LVF in different types of food and beverages samples, yielding satisfactory results with recovery rates ranging from 93.4 % to 114.6 %. This probe offers a reliable means for the detection and evaluation of trace amounts of LVF in food.
✓ 已验证
产品关联
DOI
PubMed
高影响因子