FOOD HYDROCOLLOIDS
·
2026
·
IF 13.8
Xiaoqing Xiang,Bo Song,Yexuan Wang,Bin Jiang,Dongmei Li,Chunhong Liu,Zhibiao Feng
Whey protein isolate (WPI) can self-assemble into nanofibrils (PNFs) with improved functional properties, but whey protein isolate nanofibrils (WPNFs) often undergo severe browning during preparation. Introducing ethanol to reduce solvent polarity can significantly accelerate the fibrillation process of WPI, thereby minimizing browning. Here, the effect of solvent polarity on the self-assembly behavior of WPNFs was investigated. As solvent polarity decreased, the morphology of WPNFs gradually transition from long straight to curled, with curl intensity continuously increasing. The formation ratio of long straight fibrils to curled fibrils was primarily dependent on ethanol concentration, while heating time only slightly increased the contour length of WPNFs. According to the results of the fibril conversion rates, secondary structures, building blocks at different ethanol concentrations, as well as the free amino groups and surface hydrophobicity during the self-assembly process, the mechanism of fibril self-assembly upon ethanol-induced solvent polarity was deduced. Long straight fibrils exhibited higher adhesiveness, while curled fibrils conferred higher hardness, resilience, and water retention in dispersion. Lyophilized WPNFs prepared under ethanol conditions exhibited rapid rehydration and excellent thickening properties, facilitating their application in the food industry. This study provides a foundation for further research into the self-assembly mechanism of PNFs and opens avenues for investigating the relationship between their structural and functional properties.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Yanan Guo,Xuming Liu,Qin Zhang,Xin Liu
An ultra-low temperature resistant underwater adhesive with closed-loop recyclability is developed. • The underwater adhesive exhibits a wide operational temperature range from −196 °C to 110 °C. • The adhesive achieves chemical closed-loop recycling of thioctic acid and crown ether monomers. • The crown ether-tackified strategy offers a versatile approach to sustainable low-temperature resistant adhesives. Ultra-low temperature resistant underwater adhesives are crucial for marine engineering and flexible electronics, yet integrating low-temperature tolerance, underwater adhesion, and closed-loop recyclability remains a formidable challenge. Here, we design a crown ether-tackified poly(thioctic acid) adhesive, where dibenzo-18-crown-6 ether regulates the water state by converting free water into bound water via hydrogen bonding, preserving interfacial integrity and preventing embrittlement at ultra-low temperatures. The adhesive exhibits excellent underwater adhesion on various substrates and maintains a wide tolerable temperature range from −196 °C to 110 °C. Density functional theory and molecular dynamics simulations further confirm the key role of crown ethers in enhancing both adhesive strength and low-temperature resistance. Notably, the adhesive achieves closed-loop recycling of crown ether and thioctic acid, with recovery rates exceeding 90%. Importantly, the crown ether-tackified strategy provides a universal approach for designing cryogenically tolerant and recyclable underwater adhesives. Collectively, this work offers new insights for advancing sustainable adhesive materials for extreme cryogenic environments. It is a huge challenge to enable conventional underwater adhesives combine closed-loop recyclability with ultra-low temperature resistance. Hence, a crown ether-tackified poly(disulfide) adhesive is developed that achieves robust underwater adhesion, a wide tolerable temperature range from −196 °C to 110 °C, closed-loop recyclability, reusability, and degradability. The crown ether-tackified strategy provides a sustainable pathway for next-generation adhesives in extreme environments. Download: Download high-res image (130KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Foods
·
2026
·Vol. 15
·期 13
·2401
·
IF 6
Huiqiong Wu,Yuxuan Zhu,Huan Liu,Yingying Deng,Zhipeng Wang,Hongning Liu,Zhe Li,Liangshan Ming
This study developed a pH-responsive dual-network polyvinyl alcohol (PVA) active packaging film by integrating cellulose nanocrystal (CNC)-stabilizedMosla chinensisessential oil (EO) emulsions with a tannic acid–Fe3+metal–phenolic network (MPN). The CNC-stabilized emulsion improved EO dispersion and retention in the PVA matrix and contributed to network reinforcement through hydrogen-bonding interactions, while the dynamic MPN further strengthened the film structure and acted as a pH-gated domain for regulating EO release. Composite film achieved high UVA and UVB blocking efficiencies of 90.06% and 99.60%, respectively, together with improved mechanical, barrier, antioxidant, and antibacterial properties. Compared with neutral conditions (pH = 7), EO release increased by 179.9% and 181.3% at pH = 4 and pH = 9, respectively, confirming the pH-gated release behavior of the film. In yam preservation, composite film effectively delayed browning, weight loss, firmness decline, and spoilage. Metabolomic analysis further indicated that the film treatment regulated phenylpropanoid metabolism and flavonoid biosynthesis, which may contribute to maintaining antioxidant-related metabolic homeostasis. This work offers a pH-responsive controlled-release active packaging strategy for browning-prone fresh produce.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD HYDROCOLLOIDS
·
2026
·
IF 13.8
Kai Du,Zhaoxian He,Ziyang Ren,Xuefei Yang,Mingchun Wang,Zhi Zheng
The starch-polyphenol complexes have been extensively studied, but interaction mechanisms between starch and the specific monomer of tea polyphenols (TP) and the modulatory effect on the quality characteristics of rice noodles requires further investigated. In this work, a comparative analysis on the structures and quality characteristics of TP-fortified rice noodles derived three typical indica rice cultivars (Hly 16, Ly 6176, and Zz 83) was conducted, among which Zz 83 was further selected to assess the complexation mechanism between starch and four major TP monomers (EC, EGC, ECG, and EGCG). The results showed that the formation of starch-TP complexes improved the gel properties, in which Zz 83 with TP exhibited the highest final viscosity and setback value. The network structures of rice noodles became loose and cross-sectional pores were larger upon adding TP. Rice noodles prepared by Zz 83 with TP added (Zz 83-TP) exhibited the best quality performance, which showed increased hardness (2638.93 g) and lowest cooking loss (7.19 %). TP significantly inhibited starch hydrolysis rate, while Zz 83-TP showed the strongest anti-digestibility with the hydrolysis index of 45.60 % and eGI value of 64.74. The binding capacity of galloylated catechins (EGCG, ECG) to starch was significantly higher than that of non-galloylated catechins (EGC, EC) with affinity rankings as EGCG > ECG > EGC > EC. EGCG could effectively induce starch the V-type single helical structures with the relative crystallinity of 19.38 %. This study provides a theoretical basis for the development of starch-based food design with low digestibility.
✓ 已验证
产品关联
DOI
高影响因子
International Journal of Pharmaceutics-X
·
2026
·
IF 7.9
Yinghong Huang,Yuanyuan Zhao,Yuhong Su,Chudong He,Mengdie Mo,Weijie Zhou,Yang Lu,Fei Yu
Ferroptosis, an iron-dependent programmed cell death process driven by reactive oxygen species (ROS) accumulation, represents a promising therapeutic strategy for breast cancer. However, the efficacy of ferroptosis therapy in breast cancer is often compromised by insufficient intracellular levels of hydrogen peroxide (H 2 O 2 ) and iron ions. To address these problems, we developed pH-responsive nanoparticles comprising a metal–phenolic network (MPN) shell and a bovine serum albumin (BSA) core for the delivery of artesunate (ART) (designated as BAM NPs). The designed BAM NPs aim to amplify oxidative stress and enhance ferroptosis-based therapy for breast cancer. Upon endocytosis by tumor cells, BAM NPs underwent degradation under acidic conditions to release ART and Fe 3+ . Subsequently, the reduction of Fe 3+ to Fe 2+ by glutathione (GSH) initiated the Fenton reaction, which led to aberrant accumulation of ROS. Meanwhile, the endoperoxide bridge of ART could be cleaved by Fe 2+ to further generate carbon-centered radicals (·C). Furthermore, BAM NPs effectively deplete GSH via Fe 3+ /Fe 2+ conversion to inactivate glutathione peroxidase 4 (GPX4), thereby disrupting redox homeostasis and increasing intracellular LPO levels. Both in vitro and in vivo experiments showed that BAM NPs significantly inhibited tumor cell proliferation by inducing robust ferroptosis in tumor cells, leading to a tumor inhibition rate of 83.11%. In summary, the constructed BAM NPs served as a promising tailored nanoplatform for augmenting ferroptosis therapy in breast cancer.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Antioxidants
·
2026
·Vol. 15
·期 7
·892
·
IF 8.2
Bing Jia,Chuyu Tang,Haoxu Tang,Yan Tong,Jinxuan Yan,Yuling Li,Xiuzhang Li
To explore the physiological and metabolic response mechanism ofPaecilomyces hepiali (P. hepiali)under varying temperatures, five temperature gradients were established in this study. Combined with in vitro antioxidant assays and untargeted and targeted metabolomics analyses, the variations in antioxidant system and flavonoid secondary metabolites were investigated. Results showed that temperature significantly affected the accumulation of active substances and antioxidant capacity, including of peroxidase (POD), total flavonoids, soluble protein and 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). Metabolomics analysis revealed distinct metabolic profiles among groups, and flavonoids and phenolic acids were identified as pivotal responsive metabolites. KEGG enrichment analysis revealed that flavonoid biosynthesis, linoleic acid metabolism and arachidonic acid metabolism served as core regulatory pathways. Nineteen common differential flavonoid metabolites were screened out. Correlation analysis revealed that vanillin, cryptochlorogenic acid and sinapinic acid strongly correlated with antioxidant capacity, acting as key regulators for temperature-induced antioxidant responses inP. hepiali. This study verified that temperature modulates the antioxidant system and flavonoid metabolism ofP. hepiali, offering references for industrial optimization of its fermentation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Haoyuan Xu,Xiangbowen Jin,Xing Lu,Yufan Ling,Di Fan,Houyu Wang
Spatial organization of immune ligands critically regulates cGAS–STING signaling by controling the nanoscale geometry that drives cooperative cGAS assembly and catalytic activity. Here we engineer geometry-programmable DNA origami that precisely encodes double-stranded DNA (dsDNA) valency and spacing to promote cooperative cGAS clustering and STING activation. Systematic architectural modulation identifies an optimal configuration within tested ranges, in which 60-bp dsDNA ligands arranged with ∼16.3 nm periodicity induce approximately twofold stronger STING signaling than free dsDNA counterparts. We further integrate these origamis with the probiotic Escherichia coli Nissle 1917 via transporter-mediated surface anchoring, forming a living immunomaterial interface for localized ligand presentation in colorectal tumors. In microsatellite-stable colorectal cancer models, this biohybrid system drives robust intratumoral STING activation, promotes T-cell-inflamed immune remodeling, and suppresses tumor growth by ∼83.5% relative to controls. This work establishes a geometry-programmable living immunomaterial translating nanoscale architectural design into spatially confined innate immune signaling.
✓ 已验证
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Junyu He,Meiqi Chen,Laiqin Peng,Qiqiong Wang,Yizhuang Lu,Yimin Chen,Xinyao Li,Yanling Mou,Jianjun Wang,Yuxiong Guo,Kai Wu,Yumei He
Group 3 innate lymphoid cells (ILC3) are crucial in neonatal necrotizing enterocolitis (NEC); however, the underlying mechanisms remain elusive. Here, we identify NKp46⁻CCR6⁻ (double-negative, DN) ILC3s as the dominant pathogenic subset driving NEC via IL-17 A secretion, which disrupts intestinal barrier integrity. Mechanistically, Atg5 activates autophagy in DN ILC3s during NEC. Atg5 conditional knockout in RORγt⁺ cells mitigates NEC, reduces DN ILC3 accumulation and IL-17 A production. Atg5 deficiency also decreases HIF-1α chromatin accessibility and transcriptional activity, shifting DN ILC3 metabolism from glycolysis to fatty acid oxidation. Lipidomics reveals phosphatidylcholine as a key downstream metabolite of Atg5-mediated autophagy. Phosphatidylcholine supplementation suppresses DN ILC3-driven inflammation, restores metabolic homeostasis, elevates Clostridium abundance, and ameliorates NEC in mice. Importantly, human NEC tissues exhibit increased ILC3 proportions, autophagic activity, and IL-17 A/IL-22 secretion. Thus, we uncover an Atg5–autophagy–glycolipid metabolic axis in DN ILC3s that drives NEC pathogenesis, providing a promising therapeutic target for neonatal NEC. Group 3 innate lymphoid cells (ILC3s) are key regulator of intestinal immunity. However, whether these cells drive necrotizing enterocolitis (NEC) and through which mechanism remains unexplored. Here, the authors employ a mouse model of neonatal NEC and implicate NKp46⁻CCR6⁻ double negative ILC3 autophagy in pathogenic ILC3 expansion and activation during NEC via HIF1a-modulation of glycolipid metabolism.
✓ 已验证
DOI
PubMed
高影响因子
COMPOSITES SCIENCE AND TECHNOLOGY
·
2026
·
IF 9.9
Long Chen,Licheng Lu,Chenyang Zhu,Qiong Wu,Jun He,Xuan Zhang
Synergistic T g reduction via GO alignment and NGDE flexible chain modification. • MD simulations deconvolute free volume expansion and interfacial disruption mechanisms. • Sub-additive interaction between dual modification strategies revealed at molecular level. • The optimized composite achieves 58% reduction in deicing time at −15 °C. Shape memory polymers (SMPs) facilitate ice removal by undergoing stimulus-induced deformation that weakens the ice–substrate interface. However, the high glass transition temperature ( T g ) of epoxy-based SMPs increases the activation temperature and limits low-temperature use. In this study, T g was regulated through a dual strategy combining flexible-chain modification with field-assisted alignment of graphene oxide/magnetic graphene oxide (GO/MGO) nanosheets. Neopentyl glycol diglycidyl ether (NGDE) was introduced into the epoxy network as a reactive aliphatic modifier. GO/MGO nanosheets were aligned to form interfacial regions and preferential heat-transfer pathways. Thermal analysis, shape-memory tests, and de-icing experiments were performed to evaluate the composites. Molecular dynamics simulations using the COMPASS III force field were employed to analyze changes in specific volume and free volume and to clarify the underlying molecular basis of T g regulation. The combined GO/MGO alignment and NGDE modification lowered T g from 64.9 to 38.2 °C while maintaining a shape recovery ratio of 91.1%. De-icing tests at −15 °C show that the modified EP composite reduces both de-icing time and energy consumption by 58% compared with pristine EP, indicating its potential as a low-temperature shape memory de-icing material. Download: Download high-res image (303KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Meng Mei,Kaixin Cheng,Yi Zheng,Xinxin Xing,Yude Wang
This study uses In 2 O 3 -ZnO gas sensors for early warning, providing a new pathway for battery safety protection. • The sensor shows high sensitivity to DMC and meets performance requirements for practical early warning scenarios. • The gas sensing mechanism toward DMC provides theoretical support for performance optimization and design of such sensors. • In 2 O 3 -ZnO nanocomposites are highly promising DMC sensing materials, laying the foundation for subsequent device development. During the thermal runaway process of lithium-ion batteries (LIBs), signals such as pressure, gases, and temperature are generated. Traditional pressure and temperature monitoring methods have limited capability to capture localized early-stage signals. Insufficient response time can be provided for thermal runaway early warning. In contrast, gas monitoring provides clear advantages, with gas signals appearing far sooner than temperature and pressure signals at the initial phase of thermal runaway. This paper proposes a gas-sensing detection scheme for dimethyl carbonate (DMC) based on In 2 O 3 -ZnO composite materials. DMC is the primary component of LIBs electrolytes whose release precedes that of H 2 and CO, making it a more suitable early warning marker. ZnO and In 2 O 3 nanosheets were first prepared separately via the hydrothermal method. These were then ground and calcined at high temperatures to form a composite material featuring an n-n heterojunction. Characterization confirms that the heterojunction in this composite material effectively enhances the surface adsorbed oxygen content and carrier density. Gas response testing indicates that the In 2 O 3 -ZnO sensor exhibits a lower operating temperature (160 °C), high response, rapid response, and excellent selectivity toward DMC. By integrating density functional theory (DFT) calculations with in situ Fourier transform infrared spectroscopy (FTIR) analysis, we reveal that the heterojunction enhances gas sensing performance by improving DMC adsorption capacity and charge transfer efficiency. This sensor not only responds rapidly (<15 s) in simulations of electrolyte leakage caused by puncture but also demonstrates excellent early-warning capabilities in thermal runaway experiments induced by overheating and overcharging, proving its broad applicability in complex electrochemical abuse scenarios. Download: Download high-res image (178KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS CHARACTERIZATION
·
2026
·
IF 6.2
Ehsan Ghasali,Hamidreza Ghadami Karder,Congya Zhu,Ayesha Sadiqa,Li Jie,Yasin Orooji
Novel Dy₂Ho₂Er₂Tm₂Yb₂O₁₅ high-entropy oxide successfully synthesized via conventional sintering. • Single-phase cubic bixbyite structure (Ia-3) formed across all sintering conditions. • Higher sintering time/temperature promoted grain growth, strain relaxation and homogeneity. • Bandgap narrowed to 4.45 eV due to high-entropy induced lattice distortion. characters). • Promising photoluminescence properties indicating potential photocatalytic activity. A bixbyite-structured rare-earth high-entropy oxide with the composition Yb₂Tm₂Er₂Dy₂Ho₂O₁₅ was synthesized by a conventional compaction–sintering route. The effects of sintering temperature and time on phase formation, microstructure, chemical homogeneity, and optical properties were systematically investigated. XRD confirmed the formation of a cubic bixbyite structure with the space group , while Williamson–Hall analysis indicated improved crystallinity and strain relaxation with increasing sintering severity. SEM/TEM observations and EDS mapping revealed progressive grain growth, densification, and homogeneous distribution of the constituent rare-earth elements. XPS results confirmed the predominance of trivalent rare-earth cations and a stable oxygen environment, with no major chemical-state changes after sintering. UV–Vis analysis showed a band gap of 4.45 eV, which is lower than those of the individual constituent oxides, suggesting that lattice distortion and compositional complexity influence the electronic structure. PL results further indicated reduced electron–hole recombination in the UV region. Overall, the results demonstrate that conventional compaction and sintering can produce chemically homogeneous bixbyite-type rare-earth HEOs with tunable microstructural and optical characteristics.
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2026
·Vol. 18
·期 13
·1582
·
IF 5.8
Yutong Guo,Kangkang Shi,Yujie Chen,Qunfu Fan,Dongsheng Li,Hezhou Liu
Thermally responsive shape memory polymer materials are the most widely used type of intelligent materials and have found applications in numerous fields. However, their practical utility is often limited by poor heat conduction. Carbon nanotubes (CNTs), renowned for their exceptional thermo-conductive and photothermal properties, provide a promising solution. In this study, CNTs were integrated into polyurethane prepared by stepwise polymerization method, using hydroxyl terminated polycaprolactone (PCL-diOH), poly(ethylene glycol) (PEG) and hexamethylene diisocyanate (HDI). The resulting polyurethane composite material exhibits remarkable mechanical strength, enhanced thermal conductivity, and superior shape memory performance. Notably, it demonstrates a form of training enhancement phenomenon, which shows higher mechanical properties. And the composite could achieve stress-free two-way shape memory behavior after cyclic stretching process. Additionally, this composite material can exhibit “vitrimer” material properties at higher temperatures (110 °C), allowing for shape reprogramming. The carbon nanotube-reinforced composite material can achieve remote and precise manipulation under light stimulation. By combining the composite material with a metal thermally conductive layer, a multi-layer structure with shape memory properties can be prepared, which can achieve two-way shape memory behavior under electrical and light stimulation, further expanding the application potential of the composite material in the real world.
✓ 已验证
DOI
PubMed
高影响因子