CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Si Zheng,Danping Wang,Zhiyu Kuang,Shengyao Xu,Wenxiao Li,Haiyu Zhao,Jingyi Zhang,Weiyao Li,Zhonggui He,Jin Sun,Lin Li,Bingjun Sun
Fatty acid modification enhances DTX affinity to phospholipids, increasing encapsulation efficiency and in vitro stability. • D-BC PLs with “structure-like” prodrugs enhance lipid interactions, showing modest redox sensitivity, good PK, and tolerance. • D-SC PLs with “length-like” prodrugs show high redox sensitivity, cytotoxicity, tumor suppression yet mild high-dose toxicity. Liposomes are one of the most promising nano-delivery systems to deliver chemotherapeutic drugs. Docetaxel (DTX) is a classic type of taxane drug widely used in clinical practice. However, no liposomal DTX formulation has been approved for marketing. It is speculated that the structure of DTX was highly rigid and hydrophobic, making it hard to encapsulate DTX in either lipid membranes nor aqueous phase. Therefore, designing novel DTX liposomes with high encapsulation efficiency and stability deserves further exploration. Phospholipid molecules have a hydrophilic head and two hydrophobic fatty acids as tail chains. Inspired by the structure of phospholipids, two fatty acid modification strategies were developed to construct length-like DTX prodrug (D-SC) and structure-like DTX prodrug (D-BC). Compared with DTX liposomes, two DTX prodrug liposomes (D-SC PLs and D-BC PLs) were equipped with improved drug-carrier affinity reflecting in higher encapsulation efficiency and stability in vitro. Moreover, both prodrug liposomes exhibited intelligent drug release in tumor cells. Further, D-BC PLs outperformed in the circulation stability and tolerance probably due to the improved affinity by structure-like modification strategy. In turn, D-SC PLs exhibited rapid DTX release to effectively inhibit tumor growth but cause reversible toxicity at high dosage. Overall, this work provides new insights to construct advanced prodrug liposomes for efficient cancer therapy.
✓ 已验证
产品关联
DOI
高影响因子
Small Methods
·
2026
·
IF 8.7
Zhihong Yu,Yilong Yang,Deke Li,Jinxia Huang,Zhiguang Guo
Global industrialization has intensified the discharge of organic pollutants into aquatic ecosystems, with highly toxic and recalcitrant industrial wastewater emerging as a critical constraint on sustainable ecological development. Herein, a hydrogel coating fabrication strategy combining solvent-induced phase separation and nanoparticle hybridization was developed to generate hydrogel coatings with high surface roughness and uniform porous structure, addressing the trade-off between separation flux and separation efficiency that constrains conventional hydrogel oil–water separation membranes. The spatial confinement effect of these nanoparticles was leveraged in conjunction with solvent-induced phase separation to enable one-step, controllable construction of a hierarchical porous structure. This approach integrates three functions—initiation, pore formation, and functionalization—within a single nanocomponent. Based on this approach, we fabricated a zwitterionic gel membrane featuring systematic molecular- and nano-level design and assembly. TiO 2 nanoparticles are used to replace conventional photo initiators, thereby initiating the photopolymerization of sulfobetaine methacrylate (SBMA). The resulting hydrogel hybrid membrane exhibits superhydrophilicity, underwater superoleophobicity, and robust antifouling properties. It achieves > 99.5% separation efficiency for oil-in-water emulsions while enabling pollutant degradation and membrane self-cleaning through photocatalytic activity. This design strategy offers a novel paradigm for the green fabrication of advanced separation membranes and enables scalable preparation of high-performance water treatment membranes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 4.4
Liu Yuchong,Zhao Yu,Yang Wantai,Wang Guan,Zhao Changwen,Liu Y.,Zhao Y.,Yang W.,Wang G.,Zhao C.
Biomass resources represent a sustainable alternative to fossil-based feedstocks for energy and value-added chemical production, and their utilization hinges largely on cellulase-catalyzed glucose conversion. Various immobilization strategies have been developed with the aim of cellulase recyclability. However, these strategies suffer from inadequate interactions between the substrate and immobilized cellulases, as well as poor recyclability. To overcome these drawbacks, we developed a hierarchical polymer brush architecture on polypropylene fibers through sequential photoinduced grafting and surface-initiated atomic transfer radical polymerization. This platform features hydrophilic polymer segments followed by reactive epoxy-functionalized brushes for covalent cellulase immobilization, enhancing substrate-enzyme interactions and cellulase stability against environmental alternations (especially harsh conditions). Importantly, the immobilized biocatalyst maintained 60% initial activity through six cycles in sodium carboxymethyl cellulose hydrolysis. This fiber-grafted block copolymer platform demonstrates an efficient strategy for cellulase immobilization, which opens up a new avenue for high-performance enzyme immobilization in industrial biocatalysis. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
NATURE
·
2026
·
IF 56.1
Wu Ruihan,Qin Shucheng,Zou Tianwei,Jiang Xin,Wang Senyao,Zhuang Siyu,Li Hongyu,Wang Yiyang,Li Siguang,Liu Minchao,Feng Yishun,Gong Yufei,He Haozhe,Liao Peiwen,Chen Yu,Zhang Jinyuan,Li Xiaojun,Meng Lei,Li Yongfang
Wide-bandgap (WBG) mixed-halide perovskites with high Br content, which are employed as the front cell material in perovskite–organic tandem solar cells (TSCs), often suffer from initial halide-mixing inhomogeneity and light-induced halide segregation 1 – 3 , limiting the performance of perovskite–organic TSCs. Here, we introduced a photo-transformable additive 4-[3-(trifluoromethyl)-3H-diazirin-3-yl]benzylamine (TDB) into the WBG perovskite precursor solution to establish a two-stage strategy for stabilizing the mixed-halide phase. During crystallization, TDB improves the initial halide homogeneity by suppressing the rapid precipitation of the Br-rich phase and accelerating halide mixing upon annealing. During operational illumination, TDB undergoes transformation to form a new species with stronger adsorption on the perovskite grain-boundary surfaces, which inhibits the formation of iodide-related defects, suppresses defect-assisted carrier trapping and ion migration, thereby mitigating light-induced halide segregation 4 – 6 . The representative WBG perovskite ( E g = 1.88 eV) solar cell achieved a power conversion efficiency (PCE) of 20.01%, with an open-circuit voltage of 1.42 V, a fill factor of 85.13% and improved stability under illumination. By integrating the WBG perovskite solar cell into a monolithic perovskite–organic TSC, we achieved a PCE of 28.80% with a certified steady-state PCE of 28.04%. The perovskite–organic TSC retained 90% of its initial PCE after 625 h of operation under the ISOS-L-1 protocol.
✓ 已验证
DOI
PubMed
高影响因子
Frontiers in Chemistry
·
2026
·
IF 5.3
Qingfu Wang,Jiaming Zhao,Zening Wang,Liuke Zhang,Lei Li,Yibo Ning,Zhipeng Jing,Pengfei Yang,Yongzhen Zhao,Changtong Lu
To investigate the effects of various metal salt solutions on the extraction efficiency of Lysimachia foenum-graecum Hance essential oil (LHEO), steam distillation coupled with comprehensive two-dimensional gas chromatography mass spectrometry was applied for volatile characterization. Single-factor experiments and orthogonal experimental design were adopted to evaluate four metal salts (FeCl 3 , MgCl 2 , MnCl 2 , ZnCl 2 ). All four metal salts significantly improved essential oil yield with a maximum increase of 106%, and the optimal intensification condition was determined as 1.2% ZnCl 2 with 24 h extraction. A total of 235 compounds were detected in five samples. Orthogonal partial least squares-discriminant analysis revealed obvious sample differences based on 72 common volatiles, and 17 differential compounds including furfural, neophytadiene, phytol, isophytol, α-terpineol, linalool and geraniol were identified according to VIP scores. The findings clarify the influences of different metal salt solutions on LHEO volatile profiles and provide theoretical basis and practical reference for extraction process optimization and quality control.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Science
·
2026
·
IF 14.1
Xin Tao,Cang-Man Zhang,Ru-Jie Yang,Min Ren,Zhuo-Ling Zhong,Kang-Hui Wang,Rui-Xue Hu,Jia-Yue Liu,Jun-Yi Zhou,Hou-Kai Li,Jian-Bo Wan
Understanding disease-associated metabolic reprogramming requires comprehensive interrogation of the chemically diverse metabolome. However, conventional liquid chromatography-mass spectrometry (LC-MS) workflows analyze metabolites in a largely non-discriminatory manner, resulting in systematic underrepresentation of specific functional and reactivity classes due to heterogeneous ionization efficiencies and matrix interference. Here, we report a chemoselective metabolomics strategy based on a modular reactivity-encoding platform (MREP) that enables functional group-resolved stratification of complex metabolomes. Four orthogonally designed alkyne-tagged probes selectively derivatize carboxyl, carbonyl, amine, and thiol functionalities under compatible conditions. The encoded metabolites are subsequently immobilized via azide-alkyne cycloaddition onto a unified solid-phase capture resin, which simultaneously removes matrix components and installs a diagnostic reporter module. This integrated encoding-capture architecture achieves high reaction orthogonality, near-quantitative conversion, and robust quantitative performance across structurally diverse metabolites. The resulting triazole derivatives exhibit markedly enhanced ionization efficiencies and generate a universal reporter-ion, enabling confident submetabolome classification and reconstruction. Application to serum and liver tissues from mice substantially expands the detectable chemical space, yielding 7 208 features and 1 573 annotated metabolites across four functional group-defined layers. Collectively, this work establishes the MREP framework as a versatile platform for reactivity-resolved interrogation of complex small-molecule systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Qingxiang Liu,Xin Yu,Jingtong Li,Chunyang Zheng,Yukang Zhang,Mingyu Jia,Tan Tian,Weiwei Zheng,Pinghui Zhou,Yingji Mao
Spinal cord injury (SCI) triggers a pathological cascade characterized by disrupted electrical signaling, excitotoxicity, neuroinflammation, and oxidative stress, which hinder neural regeneration. To address this complexity, an “electro-ionic-immune” synergistic strategy was implemented in a biomimetic aerogel conduit, termed “Gelatin/PLLAf/PPy-TA@Mg 2+ ” (GPPTM). The aerogel was constructed from a nanofiber matrix composed of gelatin/poly( l -lactic acid) doped with polypyrrole nanoparticles and further functionalized with tannic acid and Mg 2+ . It was engineered to form a biomimetic architecture featuring interconnected microporous networks and directional channels. It mimicked the mechanical properties and conductivity of the natural spinal cord, while exerting neuroprotective effects by inhibiting calcium influx, modulating inflammatory responses, scavenging reactive oxygen species, and alleviating mitochondrial dysfunction. Collectively, these features fostered a regenerative microenvironment promoting neural stem cell differentiation and neuronal survival. In SCI model rats, the aerogel markedly suppressed apoptosis and glial scar formation. Ultimately, the synergistic effects of neuronal survival and directed axonal growth facilitated motor and urinary functional recovery. By orchestrating multiple regenerative mechanisms to counteract the pathological progression of the hostile post-SCI microenvironment, this “electro-ionic-immune” design demonstrates clinical translation potential for SCI repair.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 5
·124167
·
IF 7.5
Chen Chen,Zhenyu Wang,Yasen Li,Jiayao Gao,Xin Chen,Mingjie Jia,Die Shao,Yiming Wang,Xuejian Li,Fuqiang Yu,Guangwen Xu,Junli Xu,Hong-bin Sun
Transition-metal borides have long been developed as promising electrocatalysts for the hydrogen evolution reaction (HER); however, the identity of their true active phase remains controversial. Here, in conjunction with our previous studies, by systematically investigating a series of cobalt- and nickel-boride-derived catalysts through a combined computational and experimental screening, we reveal that HER activity universally originates from the synergistic interaction between metallic sites and hydroxide matrices, enabled by lattice expansion, interfacial electronic transfer, and dynamic surface evolution. As a representative high-performance example, Pt-modified Co(OH) 2 derived from cobalt boride exhibits ultralow overpotentials of 11 mV at 10 mA cm −2 and 95 mV at 500 mA cm −2 , together with long-term stability. Importantly, the same reconstruction principle applies to Ni-boride systems, confirming the generality of this approach. Beyond water electrolysis, we further demonstrate that these HER catalysts are highly effective in Al-H 2 O batteries, where hydrogen evolution is coupled with electrical energy harvest. An alkaline Al-H 2 O battery employing the reconstructed catalyst delivers a power density of 21.96 mW cm −2 . This work establishes that the activity of “boride-based” HER catalysts fundamentally arises from reconstructed metal-hydroxide active centers, providing a development paradigm of transition-metal electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Xiaojian Pan,Xinyu Gao,Jiaru He,Jing Zhao,Keheng Pan,Yongjun Cao,Lihong Bao
Developing efficient electrocatalysts for the hydrogen evolution reaction (HER) is essential for sustainable energy conversion. In this work, a ternary Pt/LaPO 4 /MoB 2 heterostructure has been synthesized using a combined sol-gel, solid-state reaction and impregnation method. The optimal 1.5 wt% Pt/LaPO 4 /MoB 2 catalyst exhibits remarkable HER activity with an low overpotential of 84 mV at 10 mA cm −2 , and surpasses the commercial Pt/C at high current density (>100 mA cm −2 ). This enhanced HER performance is originated from a unique synergistic effect where metallic MoB 2 facilitates rapid electron transfer while LaPO 4 acts as a proton reservoir by forming [HPO 4 ] 2- structures to increase local H + concentration. This robust interfacial coupling effectively optimizes the electronic structure and accelerates charge-carrier transfer kinetics via the triple-phase boundaries, offering a promising strategy for large scale and high efficiency hydrogen production.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Chengzhi Xu,Haiyuan Zhang,Xiaodong Li,Jiakai Cao,Lei Yang,Gang He
Fabrication of high density silicon nitride (Si 3 N 4 ) ceramics by ultrafast high-temperature sintering remains challenges due to the decomposition of Si 3 N 4 under high temperature at atmospheric pressure. Herein, a gas-pressure assisted ultrafast high-temperature sintering (G-UHS) was developed for the preparation of Si 3 N 4 ceramics. The effects of sintering temperature (T), heating rate (HR), nitrogen pressure (P), holding time (t), and Y 2 O 3 -MgO composite sintering aids on the mass loss, oxygen content, phase evolution, and microstructure of Si 3 N 4 ceramics were systematically investigated. The densification mechanism during ultrafast high-temperature sintering was further elucidated by thermodynamic analysis in terms of mass loss and oxygen content changes. It was found that under atmospheric pressure, the mass loss during the ultrafast high-temperature sintering process first originates from the decomposition of silicon oxynitride generated by the reaction between silicon oxide on the powder surface and internal Si 3 N 4 , followed by the direct decomposition of Si 3 N 4 . Increasing the gas pressure can effectively inhibit the decomposition of Si 3 N 4 and the volatilization of liquid-phase sintering aids, thereby promoting the densification of Si 3 N 4 ceramics. It was indicated that under ultrafast high-temperature sintering, the rapid formation of rod-like crystal structure by α/β phase transition through dissolution and precipitation inhibits particle rearrangement and restricts the densification of Si 3 N 4 ceramics. Si 3 N 4 ceramics with a relative density of 94.17% were successfully prepared under the optimal sintering conditions (sintering temperature 1750 °C, nitrogen pressure 0.2 MPa, heating rate 50 °C/s, holding time 180 s) with the addition of 4 wt% Y 2 O 3 and 6 wt% MgO. This study can provide useful guidance for the optimization of the ultrafast high-temperature sintering process of high performance Si 3 N 4 ceramics.
✓ 已验证
产品关联
DOI
高影响因子
Colloids and Interfaces
·
2026
·Vol. 10
·期 4
·54
·
IF 3.8
Xinxiu Cao,Jiateng Chen,Xiaowei Kang,Yanjun Li,Minzhen Bao,Yu Wang
With the pervasive deployment of 5G communication systems and electronic devices, electromagnetic (EM) pollution has emerged as a critical environmental concern. Due to their wide availability, low cost, and ease of acquisition, biomass materials have been widely used in the preparation of electromagnetic wave absorption materials. Compared with traditional in situ impregnation methods, this study first employs chemical reagents to reduce the lignin content within balsa wood, thereby opening more pores and enhancing the loading capacity of iron salts. Subsequently, magnetic Fe3O4particles are synthesized in situ, enabling the fabrication of magnetic wood-based composites. Compared with the non-impregnated pure carbonized samples, the reflection loss value of the samples with magnetic particles increased to −42.37 dB, corresponding to a matching thickness of 1.5 mm. This is much better than the −8.79 dB of the pure carbonized samples, and is attributed to multiple loss mechanisms. In addition, modern physical and chemical analysis instruments such as SEM, TEM, XRD, XPS, and Raman were used to characterize the physical and chemical changes of the materials. Finally, its applications in aerospace and thermal response were identified.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jia-Yi Chen,Yu-Shu Han,Qing He,Yu-Qiong Huang,Ju-Hua Li,Zhong-Li Wang
A strong interaction interface is constructed between TiO 2 particles and NiMo nanorods. • NiMo alloy electrodes with and without TiO 2 exhibit different reconstruction processes as both anode and cathode. • TiO 2 tailored NiMo electrodes exhibits excellent activity and stability for over 10,000 h at 500 mA cm −2 in 30% KOH at 80 °C. • The reaction mechanism was systematically studied by in situ Raman spectroscopy and 18 O isotope labeling. The reconstruction process of electrocatalysts plays an important role in the electrocatalytic process, and how to tailor the reconstruction is crucial for the performance and remains greatly challenging. Herein, we demonstrate that TiO 2 can tailor the reconstruction process of NiMo alloy for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) reactions. NiMoO 4 microrods arrays adsorbed with titanium butoxide on its surface are converted into TiO 2 modified NiMo alloy under high-temperature reduction. NiMo alloy electrodes with and without TiO 2 exhibit different reconstruction processes as both anode and cathode under simulated industrial conditions (30% KOH, 80 °C). With TiO 2 , the cathode and anode are reconstructed into ultrafine Ni(OH) 2 nanosheets coated on NiMo alloy and ultrafine NiOOH nanosheets, respectively. Without TiO 2 , NiMo alloy electrodes are reconstructed into large-sized Ni(OH) 2 or NiOOH nanosheets on the cathode or anode. The TiO 2 tailored NiMo electrodes exhibit low overpotentials of 29 mV for HER and 213 mV for OER at a current density of 10 mA cm −2 in 1 M KOH at 25 °C. Moreover, an electrolytic cell assembled by them as both cathode and anode electrodes can maintain 1.8 V at a current density 500 mA cm −2 with stable running for over 10,000 h in 30% KOH at 80 °C. Mechanism studies indicate that TiO 3 2− ions intercalate into the interlayer of Ni(OH) 2 , inhibiting the dissolution of Mo and controlling the size of Ni(OH) 2 , and the bond lengths of Ni O and Ni Mo bonds are shortened, which effectively enhance catalytic activity and stability. Download: Download high-res image (60KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子