文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2917至2928个,产品总数13,252个

切换升序
AN
Soft Matter · 2021 ·Vol. 17 ·期 12 ·3494-3502 · IF 3.679

Self-assembly of an imidazolium surfactant in aprotic ionic liquids. 2. More than solvents

Wenchang Zhuang,Chunhua Zhao,Yue Pan,Qintang Li

As tailorable solvents, the physiochemical properties of ionic liquids can be tuned by the structure of ions. Herein, we investigate the structural effects of ILs on the self-assembly of surfactants. It has been confirmed that the cationic surfactant 1-hexadecyl-3-methylimidazolium bromide (C16mimBr) can self-assemble into micellar and lamellar lyotropic liquid crystal phases in the aprotic ionic liquid (AIL) 1-ethyl-3-methylimidazolium tetrafluoroborate ([Emim]BF4). In this work, we explore the aggregation behaviours in AILs with different alkyl chains on the imidazolium group, i.e., 1-propyl-3-methylimidazolium tetrafluoroborate ([Pmim]BF4), 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim]BF4), 1-hexyl-3-methylimidazolium tetrafluoroborate ([Hmim]BF4) and 1-octyl-3-methylimidazolium tetrafluoroborate ([Omim]BF4). With the increase of the cation chain length, AILs have better solubility of the solvophobic part of the surfactants and hence a weaker driving force for self-assembly. Therefore, the critical micellization concentration of C16mimBr in AILs increases as confirmed by the surface tension and small angle X-ray scattering characterizations. More interesting things happen to the phase behaviours. Besides the micellar and lamellar lyotropic liquid crystal phases, a hexagonal lyotropic liquid crystal phase is formed in [Pmim]BF4 while hexagonal and bicontinuous cubic lyotropic liquid crystal phases are formed in [Bmim]BF4, [Hmim]BF4 and [Omim]BF4. It is surprising to observe richer phase behaviours in solvents of lower cohesive energy. The detailed structural information of various aggregates has been obtained by small-angle X-ray scattering. It is demonstrated that AILs work as not only solvents but also co-surfactants.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
GREEN CHEMISTRY · 2012 ·Vol. 14 ·期 11 ·3204-3210 · IF 6.32

An efficient synthetic strategy for high performance polysulfone: ionic liquid/zwitterion as reaction medium

Jing Wang,Zhengping Liu

Herein we report the novel use of ionic liquid (IL)/zwitterion (ZI) as a reaction medium for the efficient synthesis of polysulfones (PSFs) with high molecular weight and high yield. The results showed that ZI can significantly improve the solubility of 2,2-bis(4-hydroxyphenyl) propane (bisphenol A), and an intermediate sulphonic-type IL with high acidity was formed by ZI and bisphenol A, resulting in 80% reduction in dehydration time compared with conventional methods.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
DALTON TRANSACTIONS · 2019 ·Vol. 48 ·期 22 ·7714-7719 · IF 4.052

A highly selective lanthanide-containing probe for ratiometric luminescence detection of an anthrax biomarker

Xiao Liu,Bin Li,Yang Xu,Zhiqiang Li,Ying Zhang,Zhi-Jun Ding,Hui Cui,Jing Wang,Hong-Biao Hou,Huanrong Li

Since anthrax spores are highly lethal to human beings and animals, and also potential biological warfare agents, it is highly desirable to develop simple, robust and easy-device sensors that are rapid and sensitive, and can selectively detect the Bacillus anthrax biomarker dipicolinic acid (DPA) quantitatively. Herein, we report a ratiometric luminescent “turn-on” sensor via mixing Eu3+ ions, sodium polyacrylate and internal luminescence reference in water, which can identify the Bacillus anthrax biomarker dipicolinic acid (DPA) quantitatively with outstanding selectivity over aromatic ligands and amino acids, even including all of the 5 DPA isomers.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2015 ·Vol. 5 ·期 25 ·19241-19247 · IF 3.84

Mesoporous ZnCo2O4 microspheres as an anode material for high-performance secondary lithium ion batteries

Lingyun Guo,Qiang Ru,Xiong Song,Shejun Hu,Yudi Mo

Herein, we report mesoporous ZnCo2O4 microspheres fabricated by a facile hydrothermal method followed by pyrolysis of a Zn0.33Co0.67CO3 precursor. The obtained ZnCo2O4 microspheres were made up of closely packed primary nanoparticles with a diameter of about 30 nm and a large number of pores that were sized between 10 to 40 nm, which results in a high BET surface area of 39.52 m2 g−1. The large surface area permits a high interfacial contact area with the electrolyte and provides more locations and channels for fast Li+ insertion/extraction into the electrode material. The porous structure may not only be beneficial for Li+ ions to diffuse efficiently to active material with less resistance but also to buffer the volume expansion during the discharging/charging processes. When used as an anode material, the specific capacity was maintained at a high value of 1256 mA h g−1 after 100 cycles at a current density of 100 mA g−1, which is about 3.4 times larger than that of the commercial graphite electrode (372 mA h g−1). More interestingly, a reversible capacity as high as 774 mA h g−1 could be retained at a high current density of 1000 mA g−1 after 200 cycles, which indicates that the mesoporous ZnCo2O4 microspheres had excellent cycling performance at a high current density for use as anode materials for lithium-ion batteries (LIBs).

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
BIOTECHNOLOGY AND BIOENGINEERING · 2025 · IF 3.6

Directed Evolution of an (R)-Selective Transaminase Toward Higher Efficiency of Sitagliptin Analog Biosynthesis

Dong-Xu Jia,Lei Zang,Chi-De Ni,Jia-Le Wang,Hai Yu,Zhi-Qiang Liu,Yu-Guo Zheng

Transaminase (TA)-catalyzed asymmetric amination is considered as a green chemistry approach to synthesize pharmaceutical analogs, but their ability to accept substrate for catalyzing sterically hindered ketones remains a challenge. Sitagliptin is an antihyperglycemic drug to treat type II diabetes. Herein, we exploited an efficient ( R )-selective TA to biosynthesize sitagliptin analog ( R )-3-amino-1-morpholino-4-(2,4,5-trifluorophenyl)butan-1-one. Starting from a previously constructed ( R )-ATA5, two rounds of directed evolution were performed through combining error-prone PCR, site-directed saturation and combinatorial mutagenesis. The resultant variant ATA5/F189H/S236T/M121H showed a 10.2-fold higher activity and a 4-fold improved half-life at 45°C. Crucially, the variant was able to either catalyze the amination of 700 mM substrate with a conversion up to 93.1% and product e.e .> 99% in a cosolvent reaction system, or biotransform 200 mM substrate with a conversion of 97.6% and product e.e .> 99% in a cosolvent-free system. Furthermore, the structural analysis gave insight into how the mutations affected enzymatic activity and thermostability. This study, which consists of constructing a robust ( R )-selective TA and the new synthesis route with the highest conversion ever reported, provides a reference for industrial manufacturing sitagliptin analog.

CAS / MDL: 112926-00-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF POLYMER SCIENCE · 2025 · IF 3.6

Cholesteric Liquid Crystal Polymer Network Patterns Formed by the Photoisomerization of an Azobenzene Derivative

Zhuang Ma,Jinghua Zhao,Limin Wu,Wei Liu,Yi Li,Yonggang Yang

Colorful cholesteric liquid crystal polymer network (CLCN) patterns have received widespread attention due to their applications for decoration and anti-counterfeiting. Herein, the CLCN films are prepared using the mixtures containing an azobenzene LC through photopolymerization. Their structural colors are controlled by the competition between the photopolymerization of the acrylate group and the photoisomerization of the azobenzene group. Namely, they can be controlled by the irradiation condition and preparation temperature. Under the irradiation of the 365-nm LED and the 1.0 kW Hg lamps, the cis - and trans -azobenzenes prefer to be formed within the polymer network, respectively. Moreover, the cis - and trans -azobenzenes prefer to be formed at lower and higher temperatures, respectively. The increase of the helical pitch of the CLCN film is driven by the formation of cis -azobenzene. A one-dimensional (1D) CLCN grating is prepared, which is formed by the mass transport and the increase of the helical pitch. Moreover, a color pattern is prepared, which can be applied in fields such as decoration and anti-counterfeiting. Graphical Colorful CLCN patterns useful for decoration and anti-counterfeiting were formed by the photoisomerization of an azobenzene derivative.

CAS / MDL: 111-25-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF THE AMERICAN CERAMIC SOCIETY · 2025 · IF 3.8

High-entropy microwave dielectric ceramic (CaSrNaBiLiY)1/6MoO4 with an ultra-low sintering temperature

Ziyu Wang,Xian Xue,Xiaomeng Li,Hong Wang,Jing Guo

Dielectric ceramics with low sintering temperatures and superior performances are essential for electronic device applications. However, it is challenging to obtain glass-free microwave dielectric ceramics with ultra-low sintering temperatures. Herein, we introduce a low-firing high-performance scheelite ceramic, (CaSrNaBiLiY) 1/6 MoO 4 , using high-entropy design to manipulate the grain boundary energy and reduce the intrinsic sintering temperature. A single phase high-entropy ceramic with tetragonal scheelite structure is formed in (CaSrNaBiLiY) 1/6 MoO 4 , as demonstrated by X-ray diffraction and transmission electron microscopy analyses. (CaSrNaBiLiY) 1/6 MoO 4 shows an ultra-low sintering temperature of 580°C, good microwave dielectric properties with a permittivity of 21.1, a Q × f value of 10 200 GHz, and a temperature coefficient of resonant frequency value of 43.7 ppm/°C, and excellent chemical compatibility with Ag/Al electrode materials. The influences of high entropy on sintering temperatures and performances are discussed from the perspective of thermodynamic laws and lattice distortion effects. The grain boundary region with a thickness of ∼10 nm is rich in Ca element and the lattice distortion from multiple cations in A site increases the permittivity of high-entropy ceramics. The microwave dielectric properties of (CaSrNaBiLiY) 1/6 MoO 4 are mainly derived from polarized optical phonons. This work provides a route for the development of glass-free ceramics with reduced sintering temperatures using high-entropy design.

CAS / MDL: 1633-05-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL EDUCATION · 2024 · IF 2.5

An Undergraduate Practical for Evaluation of Powdery Battery Materials with a Metallic Cavity Electrode

Tingting Jiang,George Z. Chen

Selection and development of novel and better materials for batteries are essential for renewable energy storage and zero or low carbon emission. This experimental design aims first to demonstrate a novel copper metal cavity electrode (Cu-MCE) for the convenient and fast investigation of powdery electro-active materials in general and silicon-based negative electrode materials for lithium-ion batteries in particular. The voltammetric features of the Cu-MCE with and without the active materials under different experimental conditions were analyzed and compared in the context of the basic electrochemistry and materials science. It is hoped that this experiment can help students to understand the reaction principle of electroactive materials, analyze independently the charge storage performances, and select the essential materials in technical terms for the development of new energy storage materials and technologies.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Materials Today Nano · 2024 · IF 8.2

An Aptamer-Based MoS2 Field-Effect Transistor Biosensor with High Sensitivity for Cytokine Detection

Hao Wang,Siyu Hou,Weihao Feng,Dongliang Li,Jialin Liu,Weisong Yang,Suichu Huang,Feiran Li,Xuezeng Zhao,Fang Chen,Cong Huang,Yunlu Pan

Biosensors based on field-effect transistor (FET) are extensively utilized in biomedical engineering for their capability to achieve rapid and label-free detection of targets. However, the extremely low concentration level of biomarkers, crucial for human health, put forward higher requirements for biosensors. Developing stable and reliable biosensors with high sensitivity for biomarker detection remains challenging. In this study, we report a highly sensitive MoS 2 -FET biosensor for the cytokine IFN-γ. Surface etching of the MoS 2 channel using a reactive ion etching system increases reactive sites for biological molecules on the channel surface, thereby enhancing the detection performance of the biosensor. The MoS 2 -FET biosensor functionalized with aptamer demonstrates high sensitivity and selectivity for IFN-γ detection (limit of detection is 5.98×10 -5 nM). Notably, the signal responses of the MoS 2 -FET biosensor are higher than that of the MoS 2 -FET biosensor without Ar etching and graphene-FET biosensor. Additionally, this paper analyzes the relationship between the modification density of probe molecules and the biosensor's detection signal, establishing a theoretical foundation for further enhancing the sensor's detection performance. Experimental results confirm that the highly sensitive MoS 2 -FET biosensor provides an effective testing platform for the biomarkers with low concentrations, crucial for disease prevention and early diagnosis.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF PHARMACEUTICAL SCIENCES · 2015 · IF 2.59

Encapsulation of 10-Hydroxy Camptothecin in Supramolecular Hydrogel as an Injectable Drug Delivery System

Ruixin Li,Chang Shu,Wei Wang,Xiaoliang Wang,Hui Li,Danke Xu,Wenying Zhong

ABSTRACT 10-Hydroxy camptothecin (HCPT) has been proven to be a cell cycle-specific chemotherapeutic agent, which is a necessary choice to inhibit tumor residue growth and prevent tumor metastasis after surgery. But it suffers from light decomposition, poor solubility, relatively low bioavailability, and some side effects, which are the major obstacles toward its clinical use. Integration of hydrophobic HCPT with hydrophilic hydrogel is a facile approach to change the disadvantageous situation of HCPT. In this study, a novel supramolecular hydrogelator with improved synthetic strategy was triggered by chemical hydrolysis, and then self-assembled to hydrogel. Taking advantage of the high-equilibrium solubility of HCPT in hydrogelator solution, this hydrogel was utilized to load HCPT via encapsulation as an effective carrier. HCPT hydrogels were characterized by several techniques including transmission electronic microscopy , rheology, and UV spectroscopy. In vitro release experiment indicated HCPT hydrogel could maintain long term and sustained release of HCPT at high accumulated rate. 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide assay showed that HCPT hydrogel had an optimized anticancer efficacy. Besides, with prominent physical properties of carrier, HCPT hydrogel possessed satisfactory stability, syringeability, and recoverability, demonstrating itself as a potential localized injectable drug delivery system . © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association J Pharm Sci 104:2266–2275, 2015

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Water · 2024 ·Vol. 16 ·期 17 ·2368 · IF 3

Nitrogen Removal from Polluted Water by an Integrated Constructed Wetland-Microbial Electrolysis Cell System

Ruina Zhang,Kexin Li,Longqiang Yi,Xin Su,Changyuan Liu,Xinyu Rong,Haoxin Ran,Yingjie Wei,Li Wan,Rui Han,Yinghai Wu

An integrated constructed wetland-microbial electrolysis cell (ICW-MEC) system was investigated for nitrogen removal under different pollution loads, hydraulic loads (HLRs), and aeration conditions. The treatment performance of each unit and the microbial community characteristics for nitrogen removal were elucidated. The results showed that, on average, 80% of NH4+-N, around 70% of nitrate nitrogen (NO3−-N), and 70% of total nitrogen (TN) were removed by the system under three pollution loads, with less influence by pollution loads. The high removal efficiencies of NH4+-N (81.8%), NO3−-N (71.4%), and TN (72.8%) indicated tolerable to high HLRs. The intermittent aeration negatively affected NH4+-N removal, while increasing NO3−-N and TN removals by 3.2–13.0% and 3.7–16.7%. The contribution efficiencies of the secondary unit to the removal of NH4+-N, NO3−-N, TN, and total organic carbon (TOC) reached 47.4%, 55.0%, 45.9%, and 38.8%, respectively. The distinct microbial communities existed in various units of the ICW-MEC system, which were strongly affected by environmental factors and shaped by diverse fillers and structures of the system. The dominant bacteria contributed to the efficient nitrogen removal performance of the ICW-MEC system. The three units exerted their advantages to ensure efficient and stable system operation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
International Journal of Chemical Reactor Engineering · 2025 · IF 1.4

Bi2S3 loaded MXene Ti3C2T x nanosheet with an adsorption-photocatalytic synergistic removal for tetracycline

Huan Xi,Lu Wang,Haimeng Huang

Antibiotics in water body pose a threat to the ecosystem and human health, and the removal of antibiotics in water is imperative. Ti 3 C 2 T x has high specific surface area and structural stability, but suffers from low catalytic activity and insufficient utilization of active sites. In this paper, Ti 3 C 2 T x /Bi 2 S 3 composites (named PTB and STB, respectively) were prepared by in situ synthesis and physical composite method. The introduction of Bi 2 S 3 extends the light absorption of the composites to the visible region. Meanwhile, the electron migration resistance in PTB is smaller and the photoresponse current is larger. PTB exhibited better adsorption-photocatalytic performance than STB and pure Ti 3 C 2 T x , with a removal efficiency of 89 %. In addition, the study investigated the effects of water quality parameters and proposed a possible photocatalytic mechanism. Finally, the tetracycline adsorption and photocatalytic performance of PTB in real water samples showed good results, especially in lake water and tap water.

CAS / MDL: 62-31-7 7789-24-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。