Journal of Materials Chemistry A
·
2026
·
IF 9.2
Zhao Meng,Haibo Yang,Yongzhen Ma,Yan Cheng,Yanlong Ma,Binglong Zheng,Hongwei Zhou,Ying Lin
In increasingly complex electromagnetic environments, developing high-performance and dynamically tunable electromagnetic wave (EMW) absorption materials is essential. This study designed a pressure-responsive TiO2/CNFs@Co/C elastic aerogel for efficient EMW absorption. A 3D interpenetrating structure consisting of Ti3C2Tx MXene-derived TiO2 nanosheets, magnetic Co/C frameworks, and carbon nanofibers was constructed via electrospinning combined with in situ synthesis. This 3D interpenetrating structure constructs abundant heterogeneous interfaces, thereby enhancing interfacial polarization. The results demonstrate that the composite achieves an exceptionally broad effective absorption bandwidth (EAB) of 8.17 GHz at a thickness of 2.7 mm, with only 10 wt% filler loading. Additionally, the composite exhibits strong environmental tolerance, including hydrophobicity, stretchability, and thermal insulation. Notably, the alginate-induced elastic aerogels enable dynamic tuning from 6.4 to 18 GHz under compressive strains of 0% to 66%. This work designs dynamically tunable, high-performance EMW absorbers through component optimization and interface engineering, providing a promising strategy for the preparation of next-generation multifunctional intelligent EMW absorbers.
✓ 已验证
产品关联
DOI
高影响因子
ACTA PHYSICO-CHIMICA SINICA
·
2026
·
IF 13.5
Chunyue Fang,Xiaoxuan Tan,Chunhong Wang,Yang He,Xiaoyuan Pei,Yu Zhang,Sarani binti Zakaria,Guangwei Fu,Jiangang Wang,Li Chen,Kun Liu,Ting Xu,Chuanling Si
Electromagnetic interference (EMI) increasingly constrains the development of flexible and multifunctional electronics materials, yet asymmetric structural design and functional integration remain limited. Here we report a Janus hierarchical membrane, liquid metal@polydopamine-MXene/Fe 3 O 4 @cellulose polyacrylonitrile nanofibers (LM@PDA-MXene/Fe 3 O 4 @CPNF), fabricated by electrospinning a Fe 3 O 4 -doped cellulose/Polyacrylonitrile nanofiber scaffold and vacuum-assisted assembly of MXene intercalated with core-shell LM@PDA nanoparticles. The multiscale architecture couples three loss pathways: a percolated MXene network for conductive loss, LM@PDA spacers that suppress restacking and form microcapacitors for interfacial and dipolar polarization, and a porous magnetic entrance that improves impedance matching. In the X-band, a single 70 μm layer achieved an average EMI shielding effectiveness (SET) of 45.1 dB and a thickness-normalised specific shielding effectiveness (SSE/t) = 8.87 × 10 3 dB cm 2 g -1 , stacking four layers raised SET to 70.8 dB. The membrane also provided orientation-dependent thermal functions, this ultrathin, eco-friendly, and lightweight membrane integrates absorption-dominant EMI shielding with bidirectional thermal management in a single platform, offering a practical route toward electromagnetic protection and infrared control in next-generation wearable electronics.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2026
·Vol. 16
·期 13
·12165-12179
·
IF 6.1
Waqas Saeed,Ye Tian,Irshad Ahmad Mir,Baoji Miao,Amna Manzoor,Surjyakanta Rana,Xing Chen
Ammonia (NH3) detection at room temperature under varying humidity conditions is crucial for environmental monitoring, industrial safety, and healthcare. However, ammonia detection remains a challenge due to the lack of sensitivity and selectivity of current room temperature based sensors. In this context, Ti3C2Tx MXene and flower-like SnS2 composites were investigated for NH3 sensing. A comparative analysis of multilayered and few-layered nanohybrid composites demonstrated that the few-layered configuration displayed a markedly enhanced response to ammonia. Its larger surface area, higher electrical conductivity, and higher number of active sites contribute to its superior gas diffusion and charge transfer properties. The composite was further functionalized with Nafion (NF) to enhance sensitivity and selectivity under humid conditions. In an optimized NF-functionalized few-layered Ti3C2Tx/SnS2 sensor, we achieved a 12.11 response ratio towards 100 ppm NH3, with a response time of 42 s and a recovery time of 156 s, as well as excellent selectivity towards interfering gases. Reliability tests conducted in humid environments confirmed the excellent operational stability and durability of the proposed sensor. These experimental results demonstrate that the developed few-layered Ti3C2Tx/SnS2/NF nanohybrid composite provides a highly durable, sensitive, and selective platform for NH3 detection in practical applications at room temperature.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Chuang Wu,Manlin Jiang,Jiacheng Wu,Jiuxin Zhang
To overcome the difficulty of forming stable and continuous conductive pathways of MXene in conventional electrospinning systems, we develop a high-performance flexible pressure sensor featuring a synergistic embedded–coated dual conductive architecture. A TPU/PCL nanofiber membrane uniformly incorporating MXene is fabricated via one-step electrospinning, followed by PEDOT:PSS dip-coating to construct an external conductive layer. Subsequent Ecoflex 00–30 encapsulation ensures mechanical integrity and maintains continuous multilevel electron-transport networks. Structural characterizations confirm the homogeneous incorporation of MXene within the nanofibers and the continuous surface coverage of PEDOT:PSS. The optimized sensor exhibits a maximum sensitivity of 7.05 kPa⁻¹ in the low-pressure region, together with a broad sensing range up to 100 kPa, enabling reliable detection across both subtle and high-pressure regimes. It further demonstrates fast dynamic response (0.11 s/0.31 s for response/recovery), a low detection limit of 50 Pa, and excellent durability over 2000 loading cycles. Demonstration tests confirm its ability to detect subtle physiological motions at different body locations, such as wrist movements and throat motions during swallowing, as well as various joint motions. Overall, this synergistic dual conductive strategy offers a promising platform for wearable health monitoring, electronic skins, and human–machine interaction.
✓ 已验证
产品关联
DOI
高影响因子
DESALINATION
·
2026
·
IF 9.9
Qiuyan Kong,Shuxin Zhou,Yongqi Chen,Yan Dong,Jing Zhang,Lu Luo,Junkai Gao
Solar-driven interfacial evaporation represents a sustainable and efficient approach for seawater desalination and wastewater purification. However, developing photothermal evaporators that combine high efficiency, long-term stability, and multifunctionality remains challenging. Herein, an ion-bond-enhanced adsorption strategy was proposed to fabricate a superhydrophilic wood-based evaporator. Using delignified wood as a hydrophilic substrate, Zn 2+ ions induce the self-assembly of MXene/carbon black (CB) composite coatings, which significantly enhance optical absorption. The intercalation of CB mitigates MXene nanosheet stacking, thereby addressing insufficient charge exposure and high reflectivity. This synergistic design yields a unique, hierarchical light-trapping architecture composed of regularly arranged tilted nanosheets, which facilitates broad-spectrum light absorption and enhances photothermal conversion efficiency. The optimized ZWMC6 evaporator achieves an evaporation rate of 2.10 kg m −2 h −1 with 90% efficiency under 1 sun irradiation, substantially surpassing natural wood (0.93 kg m −2 h −1 , 45%). Moreover, ZWMC6 exhibits strong antibacterial properties (99.96% bacterial removal) and maintains stable evaporation performance with excellent salt-resistant self-cleaning during prolonged operation. This zinc ion-guided coating strategy integrates high evaporation efficiency, antifouling capability, and photocatalytic activity, providing a novel route for functionalizing natural porous materials toward high-performance solar evaporation systems.
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2026
·
IF 12.7
Peng He,Zhuo Chen,Si-Ya Yu,Yue-Yue Wang,Qing-Qing Zhou,Mao-Sheng Cao
The foam achieves high-performance EM absorption with RL min of −59.47 dB and 4.1 GHz EAB at 1.5 mm. • The foam-based antenna exhibits a low .|S 11 | of −40.94 dB with excellent frequency selectivity. • The foam delivers stable electrochemical performance with a final capacitance retention of ∼77%. • The foam realizes the integration of EM wave absorption, wireless communication and electrochemical performance. With the rapid advancement of modern electronic information, defense technology and intelligent equipment, single-function electromagnetic (EM) materials fail to satisfy the comprehensive demands of complex application scenarios. Herein, a 3D porous magnetic MXene-based foam constructed from hollow Fe 3 O 4 (H–Fe 3 O 4 ) nanospheres, graphene oxide (GO) and MXene exhibits superior EM wave absorption performance. It delivers a minimum reflection loss of −59.47 dB and an effective absorption bandwidth of 4.1 GHz at a thin matching thickness of 1.5 mm. Moreover, the foam-based antenna achieves excellent multi-band frequency-selective performance covering S, C, X and Ku bands, with a low |S 11 | value of −40.94 dB at a substrate thickness of merely 0.13 mm. Additionally, the prepared foam possesses reliable electrochemical performance and thermal insulation capability. This work provides a new insight into the design and development of multifunctional materials and devices for complex practical scenarios. Download: Download high-res image (328KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2026
·Vol. 9
·期 33
·15886-15898
·
IF 5.8
Qi Yexiong,Zhao Zimeng,Chen Li,Li Tingting,Lin Ligang,Zhou Zena,Zheng Yong
The all-textile piezoelectric sensor,
capable of achieving
high-sensitivity
pressure sensing while meeting the requirements of wearability, comfort,
and structural flexibility, holds great significance for intelligent
wearable motion monitoring. In this study, MXene was employed to induce
the transition of polyacrylonitrile (PAN) molecular chains from a
3 1 helical conformation to a planar zigzag conformation,
which significantly enhanced the piezoelectric output performance.
Under an impulse force of 7 N at 1 Hz, the sensor exhibited an output
voltage of 34.1 V, with a sensitivity of 1.51 V/N over the range of
1–9 N. The silver-based knitted fabric electrode (silver-knitted
fabric) was knitted on a computerized flat-knitting machine, fully
leveraging the advantages of the knitted electrode, including high
conductivity (resistance of only 4.2 Ω), high air permeability
(1235 mm/s), and excellent structural flexibility. The electrospun
MXene/PAN/K-BTO composite nanofiber membrane was subsequently integrated
with the silver-based knitted fabric electrode to construct an all-textile
flexible piezoelectric sensor with a three-layer sandwich structure.
After 2000 consecutive impact cycles, the sensor output signal remained
stable without any attenuation. The sensor accurately identified various
human motion patterns, including finger bending (approximately 0.08
V), elbow flexion and extension, and walking gait (approximately 18.1
V). Owing to its excellent skin adherence and high sensitivity to
subtle movements, this sensor provides an effective monitoring tool
for intensive care and consciousness recovery assessment. Furthermore,
it holds promising potential for applications in sports health monitoring
and human–computer interaction, offering solutions for next-generation
embodied intelligence and personalized health monitoring systems.
✓ 已验证
产品关联
DOI
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2026
·
IF 5.7
Wenjuan Zhang,Zhenghao Song,Xiangyue Yang,Chunhui Li,Youliang Wang,Cuixia Li,Ling He,Qizheng Dong
Surface-passivated N-doped MXene quantum dots were prepared using pyrrole and NaBH 4 reduction. • The r-N-MQDs exhibit a fluorescence quantum yield of 12.09%. • r-N-MQDs enable sensitive and selective Cr 6+ detection with a 7.20 μM LOD and a linear range of 0.08–2.7 mM. • Cr 6+ -induced fluorescence quenching involves electron transfer and the inner filter effect. Industrial chromium emissions pose severe environmental contamination and health risks due to the high toxicity and persistence of chromium ions (Cr 6+ ), driving the need for rapid and sensitive detection methods. In this study, we utilized “defect engineering” to cleave 2D MXene precursors with pyrrole as the nitrogen source, followed by a reduction strategy to passivate the surfaces of MXene quantum dots (r-N-MQDs). The quantum yield (QY) of r-N-MQDs reaches 12.09%, which is attributed to quantum confinement effects and defect-related luminescence. The r-N-MQDs are further employed as fluorescent probes for the sensitive and reliable detection of Cr 6+ , exhibiting a detection limit of 7.2 μM and a linear response range of 0.08–2.7 mM. The fluorescence of r-N-MQDs can be efficiently quenched by Cr 6+ through a synergistic effect of redox-driven electron transfer and an inner filter effect (IFE). The constructed fluorescent probe shows considerable potential for environmental heavy-metal monitoring, benefiting from its favorable analytical performance, reliable response, and practical applicability. Download: Download high-res image (253KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2026
·
IF 8.2
Anchalee Duongthipthewa,Qingqing Wang,Jing Zhang,Liu Yuehua,Sha Yin,Limin Zhou
Reliable in-situ monitoring across manufacturing and service remains a critical challenge for fiber-reinforced polymer (FRP) composites. We report an oxidation-mitigated reduced graphene oxide/MXene (rGOM) nano-sensing layer co-fabricated with FRP composites by spray-coating, enabling continuous monitoring from resin cure through structural health monitoring (SHM). An ethanol-based L-ascorbic acid reduction strategy suppresses MXene oxidation and extends chemical storage stability beyond six months. X-ray diffraction and Raman spectroscopy confirm the absence of TiO 2 formation after accelerated aging and after one year of ambient storage. During manufacturing, the embedded layer generates distinct electrical resistance signatures corresponding to resin infiltration, gelation, and vitrification, validated against differential scanning calorimetry and dynamic mechanical analysis. A first-order thermal correction confirms that temperature effects account for at most 7.3 % of the peak cure signal, confirming a chemo-rheologically dominated response. During service, a bilinear piezoresistive response with gauge factors of 15 and 64 enables structural strain monitoring, with signal stability sustained over 100,000 laboratory fatigue cycles. Short-beam shear and tensile testing confirm property deviations within experimental scatter, validating non-intrusive integration with load-bearing structures. This manufacturing-compatible platform links in-process quality control and in-service structural assessment within a single scalable embedded architecture.
✓ 已验证
DOI
高影响因子
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
·
2026
·
IF 8.2
Danning Wang,Pengcheng Deng,Yangyang Song,Genrui Xu,Bingxue Huang,Canhui Lu,Zehang Zhou
The development of high-resolution, printable conductive composites is pivotal for next-generation portable and flexible electronic devices. Aerosol jet printing (AJP) enables non-contact precise patterning on microscale, demonstrating ideal strategy for fabricating portable electronics. Herein, a stable MXene/tannic acid-cellulose nanofiber (TACNF) composite ink with high conductivity is developed, the incorporation of TACNF effectively prevents MXene nanosheets from oxidation, alleviates restacking and enhances ink processability. Furthermore, the Zn 2+ modified cellulose nanofiber (CNF) substrate enables coordination with MXene/TACNF ink, which reinforces their interfacial bonding and thereby enhances the structural integrity and long-term stability of the printed films. Benefiting from the intrinsic conductivity of MXene and the hydrophilic TACNF network, the printed pattern with high resolution exhibits sensitive and reversible responses to different degrees of humidity stimuli. Moreover, the flexible film provides high-fidelity monitoring of electrophysiological signals, including electrocardiogram (ECG) and electromyogram (EMG). This work demonstrates a synergistic ink-substrate design that couples interfacial coordination chemistry with additive manufacturing, providing a universal strategy for scalable fabrication of flexible, and wearable sensing devices.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Yitong Yue,Shuai Wang,Hanxue Zhu,Yahong Li,Gaojie Han,Yuezhan Feng,Bing Zhou,Chuntai Liu
Lightweight and multifunctional aerogel films have emerged as promising candidates for electromagnetic interference (EMI) shielding and infrared (IR) stealth. However, current pore structures are mostly random, and achieving the construction of oriented porous layer structures remains a challenge. Herein, the MXene/sodium alginate (SA) films with ordered porous structure are fabricated via long-channel wet spinning combined with confined freeze-drying. The slit channels generate a stable shear field that induces ordered alignment of MXene nanosheets, while Ca 2+ -triggered ionic crosslinking of SA and interfacial coupling with MXene ensure robust structural stability. Confined freeze-drying further creates interlayer pore channels without disrupting the layered orientation. This oriented porous architecture prolongs electromagnetic wave dissipation pathways and reduces effective thermal conductivity, enabling simultaneous EMI shielding and IR stealth enhancement. When the content of MXene is only 50 wt%, the aerogel films achieve an EMI shielding efficiency of 65 dB across X, Ku, and K bands, alongside a low thermal radiation temperature of 76.87 °C under a 150 °C background. Additionally, favorable Joule heating and photothermal conversion capabilities are demonstrated, highlighting potential for personal protection and multi-scenario applications. This work offers a scalable strategy for designing oriented porous structures toward integrated EMI shielding and IR camouflage materials. Download: Download high-res image (123KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Composites and Hybrid Materials
·
2026
·
IF 15.5
Chen Peng,Liang Yilong,Zhang Hui,Peng Guigui,Ren Xianli
Rapid electrification and renewable-energy infrastructure expansion demand copper materials simultaneously achieving high conductivity and robust structural performance. To address this, the study developed a strategy that couples a solution–solid displacement reaction with electrostatic self-assembly to construct hierarchical MXene/Ag@Cu composite powders, thereby achieving dual molecular-level compositing of Ag and MXene. During sintering, the Ag formed a continuous strip-like Ag phase within the Cu matrix, thereby establishing efficient dual pathways for electron and mechanical conduction, as confirmed by both microstructure characterization and finite element simulation. The first-principles analyses further revealed that Ag acts as an interfacial coupling element, effectively bridging self-lubricating MXene nanosheets with the Cu matrix, thereby enhancing electron transport, load-bearing capacity, and tribological performance. Furthermore, the Ag–MXene architecture was shown to construct a robust physicochemical barrier. Thermophysical measurements indicated its role in managing frictional heat, while first-principles simulations revealed its high energy barrier against O diffusion, collectively mitigating oxidative wear. Benefiting from multiscale synergistic reinforcement, the Cu-matrix composite simultaneously achieved high conductivity (96.3% IACS), excellent strength (354.3 MPa), and an ultralow wear rate (1.72 × 10 − 6 mm 3 N -1 m -1 ). These results demonstrate that the hierarchical Ag–MXene architecture successfully overcomes the conventional conductivity–strength–wear-resistance trade-off, offering a promising strategy for next-generation high-performance copper in advanced energy and industrial applications.
✓ 已验证
产品关联
DOI
高影响因子