文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第2953至2964个,产品总数3,922个

切换升序
MXene
Materials Today Physics · 2025 · IF 9.7

Anchoring nanoflower-like NiCoMoS on hierarchical MXene for enhanced electromagnetic wave absorption by the synergy of multiple losses mechanisms

Jingwen Yang,Zhengzheng Guo,Yanyan Cao,Jianliang Xin,Gang Chen

MXene with brilliant conductivity, adjustable electromagnetic parameters and impressive electromagnetic wave (EMW) dissipation capacity has aroused considerable interest in EMW absorption field. Nevertheless, the poor EMW absorption performance caused by the serious impedance mismatching severely constrains its application in practice. In this regard, the NiCoMoS/MXene hybrids with abundant heterointerfaces were constructed through a facile electrostatic self-assembly strategy. The integration of NiCoMoS and MXene not only remarkably improves impedance matching, but also dramatically enhances the interfacial polarization. The synergistic effect of improved impedance matching and strong attenuation capacity originated from multiple loss mechanisms endows the resultant hybrids with outstanding EMW absorption performance. The NCMM3 hybrid realizes an optimal reflection loss of −56.4 dB at 12.66 GHz under a thin thickness of only 2.61 mm and a wide effective absorption bandwidth of 8.2 GHz (9.8–18.0 GHz), covering the majority of X band and the whole Ku band. Additionally, the remarkable stealth performance of the prepared NCMM hybrids used in practice is intuitively confirmed by the radar-scattering cross section simulation. This work provides a reliable approach for designing and fabricating highly efficient MXene-based EMW absorption materials with multiple components and ingenious structure.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2025 · IF 7.7

Electrocatalytic Self-Sterilizing PEG@Mn-Ti3C2Tx MXene Biosensor with Dual Antifouling Capability for Ultrasensitive Detection of Cardiac Troponin I

Meiling Lian,Haoquan Wang,Liuxing Chen,Da Chen,Qi Yang,Xuezhi Qiao

Electrochemical sensing devices often suffer from biofouling due to nonspecific adsorption of biomolecules and microorganisms in complex biological matrices. To address this challenge, we developed an efficient antifouling and self-sterilizing sensing interface by grafting polyethylene glycol (PEG) onto two-dimensional Ti 3 C 2 T x MXene nanosheets for the accurate detection of cardiac troponin I (cTnI), a gold-standard biomarker for acute myocardial infarction (AMI). The Mn 2+ -intercalated Ti 3 C 2 T x (Mn-Ti 3 C 2 T x ) exhibited enhanced electrochemical activity in a three-electron oxygen reduction reaction (3e - ORR), enabling in situ self-sterilization by activating molecular oxygen to generate hydroxyl radicals (•OH), which demonstrated potent antibacterial effects against both Gram-negative and Gram-positive bacteria. Density functional theory calculations revealed that Mn doping in MXene significantly reduced the free energy barrier of *OOH intermediate, promoting H 2 O 2 formation and subsequent reduction to •OH. The PEGylated Mn-Ti 3 C 2 (PEG@Mn-Ti 3 C 2 T x ) composite combined the superior hydrophilicity of PEG for effective protein repulsion with the enhanced conductivity of Mn-Ti 3 C 2 T x , enabling sensitive biosensing. Critically, the fabricated biosensor demonstrated high specificity for cTnI against common interferents and achieved reliable detection in spiked serum samples. It exhibited a broad detection range from 0.1   pg   mL -1 to 500   ng   mL -1 with an ultralow limit of 0.03   pg   mL -1 . This work presents a novel strategy for combating biofouling and paves the way for designing robust biosensors capable of accurate and long-term operation in clinically relevant environments, holding great promise for point-of-care diagnostics.

CAS / MDL: 7447-40-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
IEEE SENSORS JOURNAL · 2025 · IF 4.5

Phytic Acid/MXene@Polyurethane Sponge - Based Flexible Pressure Sensor with Assistance of MC-GRU model for Motion Posture Recognition

Yihong Guo,Hui Xia,Hao Zhang,Chunqing Yang,Lina Zhou,Weiwei Wang,Dongzhi Zhang

With the continuous advancement of intelligent sensing technology, the growing demand for flexible electronic products has created valuable opportunities for the development of flexible pressure sensors. In this work, a polyurethane (PU) sponge was employed as a flexible substrate, where a coupling strategy was utilized to achieve surface modification of two-dimensional MXene nanosheets with phytic acid (PA), and a PA/MXene@PU sponge(PMP) sensor was successfully constructed through a self-assembly process. As a flame retardant and binder, PA effectively enhances the conductivity and mechanical properties of PMP. This sensor demonstrates high sensitivity (16.71 kPa⁻ ¹), a wide detection range (0-175 kPa), and stability exceeding 8000 cycles. It can effectively detect responses triggered by water droplets falling from a height of 2 cm and 20 mg NaCl aqueous solution impacts (0.01 N). Additionally, its excellent flame retardancy enables self-extinguishing within 20 seconds after ignition. Additionally, this paper integrates PMP with a gated recurrent unit convolutional neural network (MC-GRU) to achieve recognition and classification of six joints—ankles, wrists, fingers, throat, knees, and elbows—with a classification success rate of up to 99.83%. The results demonstrate the immense potential of PMP sponge sensors in physiological signal detection and human motion monitoring. This work establishes a solid foundation for the intelligent development of flexible pressure sensors in motion posture analysis while providing insights into the design of safe and environmentally friendly flexible sensors.

CAS / MDL: 67-68-5 83-86-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS & DESIGN · 2025 · IF 7.9

CMC/SA/CB/CNT/thermally exfoliated-MXene five-component sponge-structured sensing materials and their enhanced sensitivity and stability

Yanzhi Cai,Zixuan Yu,Laifei Cheng,Yibing Yuan,Xue Huang,Mingxing Chen,Yalong Chai,Shaoxiong Ren,Yuan Zhou

High sensitivity and structural stability are key challenges for sensors. This study introduces a one-step integral assembly method to create a carboxymethyl cellulose/sodium alginate/carbon black/carbon nanotubes/thermally-treated MXene five-component sponge-structured piezoresistive composite (CMC/SA/CB/CNT/T-MXene sponge, CSCCM T sponge). The multi-scale conductive fillers (zero-dimensional CB, one-dimensional CNT, and two-dimensional (2D) T-MXene) not only reinforce and toughene the sponge structure, greatly improving the structural stability, but also, as conductive fillers, increase the contact sites, significantly improving the sensitivity. Introducing CB transforms the pore wall of the porous composite from a relatively dense 2D structure into a three-dimensional (3D) porous structure. Thermal treatment of MXene not only enhances its conductivity but also makes it easier to exfoliate into nanosheets, resulting in a more uniform distribution of T-MXene within the pore walls. The 3D porous structure improves anti-fatigue stability and promotes contact site variation during deformation, boosting cyclic stability and sensitivity. The lightweight composite exhibits excellent conductivity, mechanical strength (146.7 kPa at 75 % strain), and sensing performance, with high sensitivity (GF = 39.8, S = 1,703 kPa −1 ), fatigue resistance (24,500 cycles), and fast response (100 ms). These properties enable real-time human motion monitoring and show promise for flexible wearable devices.

CAS / MDL: 7789-24-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SOLAR ENERGY MATERIALS AND SOLAR CELLS · 2026 · IF 6.6

Self-dispersion and steric hindrance co-stabilized oil-based MXene nanofluids for efficient medium to high temperature photothermal conversion

Guanwang Chen,Jianxiang Zhang,Peng Su,Nianben Zheng,Zhiqiang Sun

MXene-based nanofluids exhibit outstanding broadband solar absorption capabilities in direct absorption solar collectors (DASCs); however, nanoparticle aggregation at elevated temperatures poses challenges to their practical use. To address this limitation, we develop a dual-stabilization strategy for oil-based MXene nanofluids that combines self-dispersion and steric hindrance mechanisms. This innovative approach employs hydrazine hydrate intercalation (reducing particle size) with freeze-drying-induced surface crumpling to enhance the intrinsic self-dispersion capability of MXene. Concurrently, long-chain oleylamine ligands create spatial barriers that prevent direct contact between nanoparticles. This integrated approach effectively mitigates MXene aggregation driven by van der Waals forces, as evidenced by a mere 0.14 % reduction in absorbance (765 nm) after 120 h of thermal aging at 150 °C, while maintaining the initial particle size distribution. Furthermore, the optimized nanofluid demonstrates exceptional photothermal performance, achieving a solar-weighted absorption fraction exceeding 97 % at a concentration of 60 ppm with a 3 cm path length and an equilibrium temperature of 195.6 °C under 6 sun irradiation, 44 % higher than that of the base fluid. Additionally, the system exhibits consistent photothermal stability during cycling, with relative peak temperature fluctuations remaining below 3.1 % under concentrated irradiation (4 sun and 6 sun). These results highlight the nanofluid's excellent optical absorption and thermal stability within the medium to high-temperature range of 100 °C–200 °C, implying that the proposed stabilization methodology is promising for developing durable MXene nanofluids suitable for this operational window in solar thermal applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nanoscale · 2026 · IF 5.1

Nano-engineered PEDOT(MXene)/PVDF(HFP) bilayer membranes for dual-mode flexible sensing and machine learning-guided signal recognition

Pingping Wu,Lin Li,Qilin Guo,Sijing Zhang,Yuanzhen Zhou

Flexible nanostructured sensors that combine electrical conductivity, mechanical robustness, and multimodal recognition capability are crucial for next-generation wearable electronics and intelligent human-machine interfaces. This study reports a dual-mode flexible sensor based on a bilayer PEDOT(MXene)-PVDF(HFP) composite membrane (denoted as PMPH), rationally designed via electrochemical polymerization and solvent-driven interface regulation. Through dual-dopant optimization and dimethyl sulfoxide-induced structural rearrangement, the PEDOT chains exhibit a transition from benzenoid to quinoid configurations, while MXene nanosheets provide a highly conductive and mechanically resilient framework. The resulting PMPH membrane displays superior conductivity, large stretchability (up to 1200%), and stable pressure and strain responses. The dual-mode flexible sensor not only distinguishes stretching and pressing behaviors but also achieves an intelligent classification accuracy of 92.13% through a machine-learning-assisted data recognition model.This study demonstrates a simple yet efficient strategy to couple conductive polymer-MXene hybrids with flexible fluoropolymers, bridging materials design and intelligent sensing toward advanced wearable devices.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2020 · IF 8.758

Using a Self-Assembled Two-Dimensional MXene-Based Catalyst (2D-Ni@Ti3C2) to Enhance Hydrogen Storage Properties of MgH2

Wen Zhu,Subrata Panda,Chong Lu,Zhewen Ma,Darvaish Khan,Jinjian Dong,Fengzhan Sun,Hao Xu,Qiuyu Zhang,Jianxin Zou

In this work, we report the remarkable catalytic effects of a novel Ti3C2 MXene-based catalyst (Ni@Ti-MX), which was prepared via self-assembling of Ni nanoparticles onto the surface of exfoliated Ti3C2 nanosheets. The resultant Ni@Ti-MX catalyst, characterized by ultradispersed Ni nanoparticles being anchored on the monolayer Ti3C2 flakes, was introduced into MgH2 through ball milling. In situ transmission electron microscopy (TEM) analysis revealed that a synergetic catalytic effect of multiphase components (Mg2Ni, TiO2, metallic Ti, etc.) derived in the MgH2 + Ni@Ti-MX composite exhibits remarkable improvements in the hydrogen sorption kinetics of MgH2. In particular, the MgH2 + Ni@Ti-MX composite can absorb 5.4 wt % H2 in 25 s at 125 °C and release 5.2 wt % H2 in 15 min at 250 °C. Interestingly, it can uptake 4 wt % H2 in 5 h even at room temperature. Furthermore, the dehydrogenation peak temperature of the MgH2 + Ni@Ti-MX composite is about 221 °C, which is 50 and 122 °C lower than that of MgH2 + Ti-MX and MgH2, respectively. The excellent hydrogen sorption properties of the MgH2 + Ni@Ti-MX composite are primarily attributed to the peculiar core–shell nanostructured MgH2@Mg2NiH4 hybrid materials and the interfacial coupling effects from different catalyst–matrix interfaces. The results obtained in this study demonstrate that using self-assembling of transition-metal elements on two-dimensional (2D) materials as a catalyst is a promising approach to enhance the hydrogen storage properties of MgH2.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF FOOD COMPOSITION AND ANALYSIS · 2026 · IF 4.6

Molecularly imprinted electrochemical sensor based on AuNPs-nitrogen doped graphene-MXene nanocomposite for the detection of kanamycin in milk

Zhitan Huang,Tao Liu,Jiaqi Geng,Siyue Zhang,Neha,Miantai Ye,Wei Sun

Kanamycin (KANA), a broad-spectrum antibiotic, is a potential threat to the human health and environment. Therefore, it is of great significance to establish a highly sensitive and selective detection method for KANA. A novel molecularly imprinted polymers (MIPs) electrochemical sensor based on Au nanoparticles (AuNPs), nitrogen-doped graphene (NG) and MXene nanocomposite modified glassy carbon electrode (MIPs/AuNPs-MXene-NG/GCE) was developed for KANA analysis in this paper. The physicochemical performances of the nanocomposite were characterized using various techniques including SEM, TEM, XRD, XPS and electrochemsitry. The results showed that the decoration of AuNPs on MXene enhanced the conductivity and electrochemical response, the presence of MXene and NG increased the specific surface area and active sites, and the synergistic effects were favorable to the electrode performances. Under the optimal conditions, MIPs/AuNPs-MXene-NG/GCE was applied to KANA detection using differential pulse voltammetry (DPV), which achieved a wide detection range from 0.1 nmol/L to 1.0   mmol/L with a low detection limit of 0.033 nmol/L (S/N = 3). Moreover, the sensor shows excellent stability, selectivity and reproducibility, and successfully applied to the detection of KANA content in different types of milk samples with satisfactory results. The recovery was ranged from 86.0% to 113.0% with the relative standard deviation less than 4.06%. Therefore, the developed sensor provides a new idea for the efficient analysis of KANA in food samples.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Multifunctional TA@MXene conductive organohydrogel integrating real-time sensing, photothermal antibacterial therapy, and electrical stimulation for enhanced wound healing

Zhipeng Lin,Jialing Zhuang,Shunyu Chen,Xiufeng Xiao

The development of hydrogel dressings that integrate mechanical compliance, continuous monitoring capability, and on-demand therapeutic functions remains a critical challenge in advanced wound management. Herein, a multifunctional conductive organohydrogel (POTEL) composed of a dual-network polyacrylamide/oxidized sodium alginate (PAM/OSA) hydrogel integrated with tannic acid-functionalized MXene (TA@MXene) nanosheets and lithium chloride was synthesized in a water/ethylene glycol binary solvent system. The resulting POTEL organohydrogel exhibited superior mechanical properties (fracture strain > 1400 %), high electrical conductivity (2 S/m), significant antifreezing performance (stable to −70 °C), and prolonged moisture retention. It also demonstrated an outstanding photothermal antibacterial efficacy under NIR irradiation, achieving > 99 % inactivation against both S. aureus and E. coli. When employed as a strain sensor, the material showed a high sensitivity (gauge factor = 2.70 at 100 % strain) and robust cycling durability (>100 cycles). In a full-thickness skin defect model, the POTEL organohydrogel significantly accelerated wound closure and tissue regeneration through combined photothermal antibacterial action and electrical stimulation (ES), which collectively attenuated inflammatory responses and enhanced collagen deposition. This work provides a scalable strategy for designing multifunctional hydrogels capable of simultaneous monitoring and wound healing, demonstrating a great potential as next-generation smart wound dressings and skin-conformal electronic sensors.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
BIOSENSORS & BIOELECTRONICS · 2026 · IF 11.8

Signal-enhanced ultrasensitive photoelectrochemical immunosensor for detecting Aflatoxin B1 based on phage-anti-immunocomplex peptide and PCN-224@MXene

Wenxu Song,Xinrui Cao,Wendi Yue,Fengchun Zhao,Qing Zhou,Zhengyou Yang

As a carcinogenic mycotoxin, Aflatoxin B1 (AFB1) is widespread in grains. In particular, corn-derived feed and food are more heavily contaminated with AFB1 than other grain products, which pose severe risks to food safety and human health. Thus, developing rapid, sensitive, and accurate AFB1 detection methods is of great importance. In this study, a highly sensitive photoelectrochemical (PEC) immunosensor for detecting AFB1 based on phage-anti-immunocomplex peptide and the PCN-224@MXene composite was developed. The prepared phage-anti-immunocomplex peptide could bind to a large number of enzyme-labeled secondary antibodies, thereby greatly increasing the loading capacity of horseradish peroxidase (HRP). Moreover, the PCN-224@MXene showed wider light absorption range and narrower band gap, which is conducive to improving the photoelectric conversion efficiency. This resulted in the photocurrent intensities of PCN-224@MXene being 1.9-fold and 2.5-fold higher than those of PCN-224 and MXene, respectively. In addition, HRP catalyzed the oxidation of 4-Chloro-1-naphthol by H 2 O 2 to product an insulating precipitate, which hindered photo-induced electron transport, and thereby lead to a distinct photocurrent change. Using the multi-signal amplification strategy, the sensitivity of the PEC immunosensor for detecting AFB1 was significantly enhanced. Under the optimal detection conditions, the linear range was from 1 fg mL -1 to 100 ng mL -1 , and the detection limit was as low as 0.91 fg mL -1 (3σ/S). This LOD was considerably lower than the regulatory limit for AFB1 in corn. This method showed good selectivity, stability and reproducibility, and could be applied to the detection of AFB1 in corn samples.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2026 · IF 6.6

Engineering TiO2-TiS2 heterostructure decorated on S, O-functionalized MXene as multifunctional interlayer for high-performance lithium-sulfur batteries

Shiwei Ge,Qian Zhao,Weijian Du,Weikun Jiang,Yu Liu

A TiO 2 -TiS 2 heterostructure decorated on S, O-MXene was successfully constructed. • TiO 2 -TiS 2 heterostructure mitigates MXene stacking and facilitates Li + diffusion. • The design of TiO 2 /TiS 2 ratio can balance the adsorption-catalysis trade-off. • S, O functional groups on MXene offer additional anchoring and catalytic sites. • The SM-TT interlayer enhances the cycle and rate performance of Li-S batteries. The practical application of lithium-sulfur (Li-S) batteries is impeded by polysulfides shuttling and sluggish sulfur redox kinetics. Although Ti 3 C 2 T x MXene has demonstrated great potential for polysulfides adsorption and conversion, its restacking tendency significantly diminishes its practical effectiveness. To address this critical issue, we designed and fabricated a TiO 2 -TiS 2 heterostructure decorated on sulfur and oxygen-functionalized MXene (SM-TT) through a controlled sulfurization strategy. This well-engineered architecture not only suppresses MXene restacking but also constructs abundant heterointerfaces that synergistically facilitate electron and Li + transport. Moreover, the rationally designed TiO 2 /TiS 2 ratio can well balance the adsorption-catalysis trade-off of polysulfides. Additionally, the sulfur and oxygen functional groups on MXene surface provide additional active sites for polysulfides anchoring and catalytic conversion. When employed as multifunctional interlayer in Li-S batteries, the SM-TT interlayer enables the cell to deliver a high initial capacity of 1292.8 mAh g −1 at 0.1C, maintain 768.6 mAh g −1 after 100 cycles, and exhibit 604.7 mAh g −1 at 1 C. Even under 5 mg cm −2 high sulfur loading, the cell still retains stable capacity of 722.7 mAh g −1 after 100 cycles. This work demonstrates an effective heterointerface engineering strategy for developing high-performance Li-S batteries. Download: Download high-res image (163KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
DESALINATION · 2026 · IF 9.9

Template-free engineering of gradient pores in 2D MXene/PVDF composite membranes for high-performance solar-driven seawater desalination

Zhenwu Chen,Haoran Zhang,Ziyi Zhang,Mengxin Liu,Kunlai Zhang,Lei Pan

Template-free blade-coating fabricates a MXene/PVDF membrane with gradient pores. • Top-small and bottom-large pores enable fast water transport and heat localization. • One-sun evaporation rate is 1.54 kg m −2  h −1 and photothermal efficiency is 93.66%. • Outstanding salt resistance and long-term durability are achieved. • Desalinated seawater meets both WHO and Chinese standards for drinking water. Addressing the global freshwater scarcity crisis, solar-driven interfacial evaporation represents a promising, energy-efficient desalination technology. Conventional porous evaporators, however, face a fundamental performance trade-off between efficient water supply and effective surface heat localization. To resolve this conflict, this study presents a novel two-dimensional (2D) MXene/polyvinylidene fluoride (PVDF) composite membrane featuring an architecturally gradient “top-small, bottom-large” pore structure, fabricated via a straightforward blade-coating and immersion precipitation phase inversion process without any template. This unique design simultaneously enables rapid capillary-driven water transport and confines thermal energy at the evaporation interface. A hydrophobic fluorinated silica (F-SiO 2 ) is further applied to ensure stable self-floating and prevent salt accumulation. The resulting membrane (~0.25 mm thick) demonstrates high porosity (~40.7%) and superior broad-spectrum light absorption (~95%). Under 1-sun illumination, it achieves a high evaporation rate of 1.54 kg m −2  h −1 and a remarkable photothermal conversion efficiency of 93.66%, while also exhibiting excellent cycling stability and salt resistance. Practical desalination tests using Bohai Sea water confirm that the purified water meets both World Health Organization (WHO) and Chinese drinking water standards. This work provides an effective strategy for designing high-performance, low-cost solar evaporator, demonstrating significant potential for scalable desalination and water purification applications. Download: Download high-res image (237KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。