文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3013至3024个,产品总数347,550个

切换升序
POWDER TECHNOLOGY · 2026 · IF 5.5

Spherulitic growth strategy for solvent-induced formation of spherical L-carnosine products

Jinqiu Fu,Zheng Ren,Huanfa Feng,Jingliang Xu,Wei Zhuang,Hanjie Ying,Pengpeng Yang,Keke Zhang

Solvent effects on L-carnosine spherical aggregates were studied. • Reduced (001) solvent-crystal interaction promotes spherulitic growth. • Tip defects trigger non-crystallographic branching and spherulitic growth. • The spherulitic crystals exhibited superior flow properties. L-carnosine, a biologically active dipeptide with significant antioxidant properties, typically crystallizes in a needle-like habits that result in poor flowability and low bulk density, posing significant challenges for downstream processing. This study provides a new strategy for the preparation and optimization of spherical L-carnosine crystals. Systematic solvent screening identified dimethyl sulfoxide (DMSO) as the optimal antisolvent, enabling the formation of dense, uniform spherulites. The effects of main crystallization parameter on the morphology and properties of the spherical crystals were explored and the optimal crystallization conditions were determined. Molecular dynamics simulations and experimental analyses reveal that DMSO selectively reduces the solvent-crystal interaction energy on the (001) crystal face, accelerating growth at the crystal tips and triggering non-crystallographic branching. Compared to the raw material and spherical agglomerates, the spherulites show a 3.6-fold and 2.7-fold increase in bulk density, respectively. More importantly, they exhibit excellent flowability (Carr's index 14.4% vs. 47.8% and 39.2%; Hausner's ratio 1.16 vs. 1.92 and 1.47), highlighting the primary advantage of the spherulitic growth strategy. This work provides a mechanistic understanding of spherulitic growth and offers a practical route to enhance the powder properties of L-carnosine. Download: Download high-res image (223KB) Download: Download full-size image Solvent‑dependent morphology evolution and non‑crystallographic branching mechanism in L‑carnosine spherulitic crystallization.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

A high-efficiency and thermally robust color converter based on phosphor-in-glass-ceramics for high-brightness laser-driven lighting

Can Jin,Danyang Shen,Bingpeng Li,Youjie Hua,Zhaoqian Xu,Weigang Guo,Lei Gu,Chenxia Li,Degang Deng,Renguang Ye

Phosphor-in-glass-ceramic (PiGC) is regarded as promising material for high-power laser-driven lighting. However, the low crystallinity and excessively large grain size of current PiGC materials lead to limited improvement in both luminous flux (LF) and luminous efficacy (LE). Here, we report a preparation of transparent, highly crystalline nanocrystalline glass-ceramic with tunable crystallinity via a low temperature spark plasma sintering (SPS) and heat-treatment process. The nano-crystals perform a dual functional role by acting as light-scattering centers to enhance light conversion efficiency and simultaneously forming a secondary phase that establishes localized thermal dissipation networks for rapid cooling of the PiGC. The optimized sample exhibits superior optical performances with an LE of 347 lm W −1 and an LF of 1633 lm under 7.08 W. Compared to phosphor-in-glass (PiG) sample, the best PiGC sample exhibits an LF reaching 216% of the original value, demonstrating that Zn 2 SiO 4 precipitation significantly enhances the material's luminescent properties. This result shows that the designed PiGC has an important application prospect in high-brightness, long-range laser-driven lighting systems.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Research and Technology-JMR&T · 2026 · IF 7.3

Study on friction behavior and wear resistance mechanism of different screw materials during homogenization of LFP/NCM battery slurries

Xiangli Wen,Mingkun Bi,Lvzhou Li,Jianning Ding

SUS304 steel is widely employed as the core component material in battery slurry homogenization equipment. However, due to its insufficient hardness and poor resistance to plastic deformation, severe abrasive wear and oxidative corrosive wear tend to occur during the homogenization process, which further deteriorates the battery performance. In this work, targeting the special medium of battery slurry, three potential screw materials for application in battery slurry systems were selected: 40Cr alloy steel, 440C martensitic stainless steel, and GCr15 bearing steel. The friction behavior laws and wear resistance mechanisms of these materials in lithium iron phosphate (LFP) and lithium nickel cobalt manganese oxide (NCM) slurries were systematically investigated using an atmosphere friction and wear tester. The results demonstrate that all three materials exhibit superior wear resistance compared to SUS304. Among them, the chromium-rich hard phase in 440C delivers excellent anti-wear properties, making it suitable for medium-to-high speed homogenization, especially with outstanding performance in LFP slurry. GCr15 possesses a uniform and stable phase structure composed of carbides and martensite, resulting in broader adaptability to various working conditions. It maintains an extremely low wear rate ( δ ) with minimal fluctuation in both slurries, and the reduction in δ exceeds 90% under high-speed and high-load conditions, revealing the optimal comprehensive performance. This work provides important theoretical basis and experimental support for material selection of key components in battery homogenization equipment, and is of positive significance for improving equipment reliability and ensuring the quality of battery slurry.

CAS / MDL: 64-17-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF HAZARDOUS MATERIALS · 2026 · IF 10.6

Neonicotinoid insecticides induced neurotoxicity in SH-SY5Y cells via oxidative stress and mitochondrial dysfunction

Ziyan Cheng,Xinru Wang,Zhimin Yang,Jingtong Yu,Nan Zhao,Chenyang Ji,Quan Zhang,Meirong Zhao

Neonicotinoid insecticides (NNIs) are ubiquitously detected in the environment, yet their comparative neurotoxicity and mechanisms remain insufficiently characterized. This study systematically evaluated the neurotoxic potential of eight common NNIs (imidacloprid, acetamiprid, thiacloprid, thiamethoxam, clothianidin, flonicamid, sulfoxaflor, and imidaclothiz) using human SH-SY5Y cells. Results demonstrated that all tested NNIs significantly reduced cell viability. Mechanistically, NNI exposure triggered excessive reactive oxygen species (ROS) production, inhibited superoxide dismutase (SOD) activity, and elevated malondialdehyde (MDA) levels, indicating severe oxidative stress. Notably, Exposure to NNIs caused a dissipation of mitochondrial membrane potential (MMP) and profoundly disrupted mitochondrial bioenergetics. Analysis of energy metabolism revealed that NNIs suppressed both the oxygen consumption rate (OCR) and extracellular acidification rate (ECAR), suggesting an impairment of oxidative phosphorylation and glycolysis. These findings suggested that NNIs induced neurotoxicity through coordinated oxidative stress and mitochondrial dysfunction, resulting in global bioenergetic suppression characterized by concurrent impairment of oxidative phosphorylation and glycolysis. This study provides critical toxicological evidence for the environmental risk assessment of NNIs and underscores their potential impact on human neurological health.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY · 2026 · IF 7.1

Washable and antibacterial air filtration paper enabled by dual-functional core-shell polymer coatings

Peng Luo,Guilong Xu,Lingxiao Wang,Min Tang,Zhaoxia Sun,Yun Liang

Washable air filtration materials are crucial for sustainable public health defense against particulate matter and airborne pathogens. However, conventional antibacterial air filter media are prone to mechanical strength degradation and the rapid leaching of active components during washing, compromising both filtration efficiency and antibacterial efficacy. Here, we report a robust, roll-to-roll fabricable glass fiber filter paper that achieves washing durability and antibacterial performance via a dual-functional core–shell structured polymer binder. The polyacrylate core layer acts as a mechanical reinforcement that improves the tensile strength of the filter paper from 200 N/m to 811.7 N/m with an 8 wt% binder loading, providing the structural resilience against physical stresses of industrial pleating and washing cycles. The shell layer acts as a functional shield with surface enriched quaternary phosphonium groups and fluorinated chains, providing antibacterial property via electrostatic interaction and anti-leaching protection via hydrophobicity. The filter papers retain high filtration efficiency (>97.8 %), low air resistance (<168 Pa@5.3 cm/s) and antibacterial rates of 99.8 % against E. coli and 99.9 % against S. aureus even after ten washing cycles. This work offers a promising, scalable strategy for developing long-term reusable antimicrobial air filter media for sustainable air quality management.

CAS / MDL: 2997-92-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2026 · IF 10.7

Fabrication of palmitic acid-grafted epoxidized natural rubber leakage-resistant phase change composites for energy storage

Zilong Chen,Wei Liu,Xiaohang Li,Zhengwei Chang,Jun Lin,Liqun Zhang,Lin Chen,Shaojian He

The development of phase change composites (PCCs) with effective leakage-resistant and high latent heat for efficient energy storage remains a significant challenge. Palmitic acid (PA) grafted epoxide natural rubber (ENR) was selected as the matrix (ENR-PA), with PA as the phase change material. PCCs with ENR-PA matrix prepared using different feed ratios of PA-to-ENR were fabricated under PA loading of 50 wt%. The effects of feed ratio on the PCC structure, latent heat, and leakage resistance were systematically investigated. The study revealed that the PCC prepared with a PA-to-ENR feed ratio of 0.5 as the matrix (ENR-PA 1 ) exhibited the optimal overall performance, characterized by the highest latent heat and the lowest leakage rate. PCCs with different PA loadings were prepared based on ENR-PA 1 . When the PA loading was 60% (ENR-PA 1 /PA-60%), the latent heat of PCC was 123.6 J/g, and the leakage rate was only 1.3% after 8 h at 75 °C. After 100 cold-hot cycles, the latent heat of ENR-PA 1 /PA-60% was 121.6 J/g, with only a 1.6% attenuation. This straightforward and feasible PCC preparation strategy offers a promising choice for fabricating thermal energy storage materials with high phase change enthalpy and low leakage rates, demonstrating promising application prospects.

CAS / MDL: 1739-84-0 57-10-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CORROSION SCIENCE · 2026 · IF 10.3

Grain boundary engineering for enhanced corrosion resistance of Si3N4 in molten MgCl2-NaCl-KCl salts

Yueqi Wu,Mingyong Jia,Qiang Shen,Fei Chen

Silicon nitride (Si 3 N 4 ) ceramics are promising structural materials for next-generation concentrated solar power (CSP) systems, while their long-term stability in aggressive molten chloride salts remains insufficiently understood. Here, we investigate the corrosion behavior and decomposition mechanism of a conventional Y 2 O 3 -sintered β-Si 3 N 4 ceramic in molten MgCl 2 –NaCl–KCl at 600 °C. The corrosion process proceeds through three sequential stages: preferential dissolution of the amorphous intergranular phase (IGP), formation of a detrimental Mg 2 SiO 4 layer, and subsequent chemical attack of β-Si 3 N 4 grains. Guided by this mechanistic understanding, we propose a grain boundary engineering strategy using YF 3 /MgF 2 sintering aids to fabricate corrosion-resistant Si 3 N 4 ceramics. The engineered ceramic exhibited a 25% reduction in average corrosion depth and excellent property retention after 800 h of exposure. Its bending strength loss is only 8.3%, compared with 13.8% for the reference material, and its thermal conductivity loss is 4.8%, compared with 8.4% for the reference material. The improved corrosion resistance is attributed to the combined effects of a chemically stable crystalline Y 4 Si 2 N 2 O 7 intergranular phase, elimination of residual SiO 2 impurities, and a coarsened microstructure. Salt purification experiments further confirmed the proposed corrosion mechanism by suppressing impurity-driven decomposition. In purified molten salt, the engineered ceramic shows an extrapolated corrosion rate of approximately 16.8 μm·year - ¹ , meeting the U.S. DOE corrosion target of < 20.0 μm·year - ¹ . These results demonstrate that grain boundary engineering is an effective strategy for improving the durability of Si 3 N 4 ceramics in high-temperature molten chloride salt environments.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Controlled synthesis of high-yield, high-tapped-density spherical silver powder for wearable strain sensing

Xinyu Han,Xinyue Zhang,Haoyang Song,Changsheng Liu,Yongquan Qing

Monodisperse microspherical silver powder with a high yield of 99.9%, high tapped density, and excellent dispersibility was prepared via a controlled liquid-phase reduction route. • Ag(111)-based simulations revealed dispersant adsorption behavior, while experiments confirmed their regulation of silver particle growth. • The prepared silver powder was further used to construct a flexible wearable sensing materials, enabling real-time monitoring of various human motions. High-quality monodisperse microspherical silver powders hold considerable promise for conductive pastes and flexible electronics. However, the concurrent realization of high yield, dense packing, and excellent dispersibility remains challenging. Herein, we report a controlled liquid-phase reduction route based on an ammoniacal silver complex, using formaldehyde as reductant and stearic acid as dispersant. The resulting silver powder exhibits an ultrahigh yield of 99.9%, a tapped density of 6.0 g/cm 3 , and excellent sphericity and dispersibility. Moreover, this exceptional performance is enabled by a stable organic interfacial layer formed through carboxyl-group adsorption on the silver surface, which suppresses disordered agglomeration and promotes uniform particle growth. Notably, a flexible strain sensor constructed from this powder delivers a rapid response time of 125 ms and stable real-time monitoring of various human motions. This work demonstrates a practical pathway for the controlled synthesis of high-performance spherical silver powder for wearable sensing applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Sustainable Materials and Technologies · 2026 · IF 9.7

Foldable polyimide composite films assembled with highly transparent 2D3D heterogeneous MXene/Ln3+@UiO-66: Exceptional ultraviolet resistance

Hong Chen,Wei Ou,Hongchang Huang,Junlan Li,Juncheng Liu

Both the 2D titanium carbide (Ti 3 C 2 T x ) MXene and the 3D rare earth doped zirconium-based metal organic framework (Ln 3+ @UiO-66, MOF) were constructed on the colorless transparent polyimide (CPI) film to form the heterojunction multifunctional nano-coating via a one-pot immersion method in order to improve the UV resistance of CPI. Firstly, the S/CPI film was obtained via the CPI being modified with silica (SiO 2 ) sol, and then the Ti 3 C 2 T x MXene was loaded onto the surface of the S/CPI film via the hydrogen bond, finally the Ln 3+ @UiO-66 was loaded onto the ultra-thin Ti 3 C 2 T x MXene nanosheets to obtain optimal sample (MXene/Ln 3+ @UiO-66-S/CPI). The transmittance of MXene/Ln 3+ @UiO-66-S/CPI is 93.33%, which is only 0.94% lower than that of S/CPI. The tensile strength and elongation of MXene/Ln 3+ @UiO-66-S/CPI are basically the same as those of S/CPI. The attenuation values of transmittance, tensile strength, and elongation for MXene/Ln 3+ @UiO-66-S/CPI film after 5000 equivalent sun hours (ESHs) UV irradiation are 2.44%, 10%, and 18%, respectively, i.e., this film gets both a high transparency and a super ultraviolet resistance. This may be attributed to the fact that the MXene/Ln 3+ @UiO-66 multifunctional nano-coating can absorb the UV light and undergo the down-conversion, weakening the UV irradiation intensity.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

Achieving high dielectric performance in molybdate-based, dual-phase, high-entropy ceramics for LTCC applications

Yuxuan Ren,Xiangkai Zhu,Shaozhen Chen,Wenyu Wang,Junxian Wang,Ke Wang,Jiamao Li

To improve the sintering performance and quality factor ( Q × f ) value of molybdate ceramics, we designed and prepared a dual-phase high-entropy scheelite ceramic (Ca 0.2 Ba 0.2 Sr 0.2 Na 0.2 Bi 0.2 )MoO 4 via the solid-phase reaction method. The resultant ceramics consisted of Na 0.32 Bi 0.56 MoO 4 and Ba 0.75 Sr 0.25 MoO 4 solid solution. The (Ca 0.2 Ba 0.2 Sr 0.2 Na 0.2 Bi 0.2 )MoO 4 ceramics sintered at 900 ℃ exhibited excellent microwave dielectric properties of relative constant ( ε r ) = 12.46, Q× ƒ = 131,009 GHz, and temperature coefficient of resonant frequency ( τ f ) = -40 ppm/℃, along with good compatibility with silver electrodes. The ε r of the ceramics was influenced by the ionic polarizability and Raman shift whereas the Q×f was primarily influenced by the grain size and the full width at half maximum (FWHM) of the Raman peak at 886 cm −1 . The τ f of the ceramics is primarily governed by the A-site bond valence in Na 0.32 Bi 0.56 MoO 4 due to its dominant role in the ceramics. The dual-phase high-entropy strategy enables molybdate-based ceramics with excellent sintering behavior and dielectric properties, making them suitable for LTCC applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2026 · IF 19.7

Breaking activity-selectivity trade-off: Synergistic catalysis over electron enriched Ru single-atoms and oxygen vacancies for cinnamaldehyde hydrogenation

Jin Zhang,Mengting Gao,Ruiyi Wang,Xincheng Li,Linjuan Pei,Yunwei Wang,Zhanfeng Zheng

Anion etching strategy has been developed to fabricate dual-function active site catalysts with a clear division of labour. • The Ru O /TiO 2 catalyst breaking the activity-selectivity trade-off of cinnamaldehyde hydrogenation. • The high electron density of Ru active sites effectively lowers the reaction barrier for isopropanol activation. • The oxygen vacancies dominate the product selectivity, as they promote the preferential activation of -C=O groups. • Revealed the promotional effect of the carbon radical-mediated pathway on cinnamaldehyde hydrogenation. The activity-selectivity trade-off is a longstanding challenge for the selective hydrogenation of α,β-unsaturated aldehydes/ketones, and conventional single-atom or defective catalysts often fail to simultaneously increase the conversion and selectivity via a single active site. Herein, we develop a one-step anion etching strategy to synchronously fabricate electron-enriched Ru single-atoms and high-density oxygen vacancies on the anatase TiO 2 support, realizing spatially adjacent yet functionally divided dual active sites. The optimal Ru O /TiO 2 catalyst breaks the activity-selectivity trade-off, achieving 99% cinnamaldehyde conversion with 95% selectivity for cinnamyl alcohol under visible light, and has excellent structural stability and substrate universality. Combined characterizations and density functional theory (DFT) calculations reveal that oxygen vacancies modulate the electronic metal-support interaction (EMSI) between Ru single-atom and the TiO 2 support and suppress electron transfer from Ru to TiO 2 , thereby forming electron-rich Ru centres that efficiently activate isopropanol for a continuous hydrogen supply. Moreover, oxygen vacancies exclusively anchor the -C O group of cinnamaldehyde in an end-on adsorption mode and inhibit -C C hydrogenation. Thus, the synergistic effect between the dual-function active sites enables the high-efficiency and high-selectivity hydrogenation of cinnamaldehyde. This work clarifies the synergistic mechanism of single-atoms and vacancies at the atomic level and provides a facile, universal strategy for designing high-performance catalysts for the selective transformation of unsaturated organics. Download: Download high-res image (147KB) Download: Download full-size image The electron-enriched Ru active centers and oxygen vacancies form dual functional active sites with clear division of labor through anion etching strategy, and this dual functional sites breaking activity-selectivity trade-off of cinnamaldehyde hydrogenation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

High-precision and high-stability NTC thermistors driven by hole-electron bipolar conduction mechanism

Shuangjiang He,Ran Wang,Fangfang Wu,Xiaoshan Wang,Jian Wang,Yang Liu,Xiao Zhang,Sen Liang

Negative temperature coefficient (NTC) thermistors are critical components in electronic circuits for overheat protection, owing to their exceptional temperature compensation properties. However, the susceptibility of the inherent spinel structure to degradation in low-oxygen environments limits their operational stability. We report the design of a robust inverse spinel-perovskite-fluorite three-phase heterostructure, achieved by combining heterojunction and entropy engineering to withstand low-oxygen environments. By optimizing Mn doping and regulating R-O bonds, the high-temperature/low-oxygen grain boundary resistance is minimized to 0.55 Ω·cm. This specific architecture effectively suppresses interphase elemental diffusion and stabilizes manganese ions entirely as Mn 2+ . Consequently, the ceramics exhibit exceptional environmental stability, featuring restricted room-temperature resistance ( R 25 ) and material constant ( B 25/50 ) drifts of 0.93% and 0.11%, respectively, alongside a minimal aging rate of 0.2% after 600 h in air. A substantial room-temperature temperature coefficient of resistance (TCR) of −5.98% ensures high-precision sensing capabilities. Density functional theory (DFT) calculations reveal that La and Ce dopants establish high energy barriers against elemental migration, while an internal electric field and interfacial coupling synergistically stabilize the hole-electron conduction mechanism. This study provides a compelling ceramic heterostructure paradigm for advanced sensing in extreme environments.

CAS / MDL: 1306-38-3 1312-81-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。