APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Yujie Wu,Danrui Pan,Jinlin Yin,Shaoke Chen,Jin Wang,Ahmed Mahmoud Idris,Zhengquan Li
Designing compact heterojunctions with optimized light absorption and carrier separation is a promising approach to realizing economically viable CO 2 photoreduction, yet it requires intricate structural and electronic engineering. Herein, a compact 0D/2D heterojunction was constructed by growing CsPbBr 3 nanocrystals (NCs) in situ on ultrathin porous nanosheets of Ni-doped LaFeO 3 . The resulting Ni-doped LaFeO 3 /CsPbBr 3 heterojunction exhibits a broad light absorption range. Mechanistic investigations reveal that the charge transfer follows a direct Z-scheme mechanism, thereby enabling highly efficient charge separation and transport. As a result, the optimized LaFe 0.74 Ni 0.26 O 3 /CsPbBr 3 exhibited a remarkable CO yield of 49.5 μmol g −1 h −1 with an electron consumption rate of 107.8 μmol g −1 h −1 , which is twice that of its undoped heterojunction and 5.5 times higher than pristine CsPbBr 3 NCs, setting a new benchmark among reported solid–gas CO 2 reduction systems with visible light. This work highlights the synergistic benefits of heteroatom doping and heterojunction engineering in enhancing photocatalytic performance, offering valuable insights for the development of efficient photocatalysts for solar-driven CO 2 photoreduction.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2025
·
IF 5.4
Jing Li,Yingying Zhang,Yongkang Han,Jiahe Chen,Amir Zada,Yanying Han,Xiner Li,Seah Hong Siong Nickolas,Yuhui Liu,Alei Dang
Electromagnetic interference (EMI) shielding materials with low EM waves reflection and high EM waves absorption characteristics are ideal materials for blocking EM radiation and pollution. Herein, we prepared a reduced graphene oxide@nickel (rGO@Ni) fibers with core-shell structure as an efficient EMI shielding material with remarkable mechanical properties using wet spinning, fixed reduction and subsequence in-situ electroless plating techniques. Benefiting from the tight alignment of graphene nanoflakes from the fixed reduction and filling of the macro-micro and nano-scaled defects within rGO fibers by in-situ construction of Ni, the tensile strength of rGO@Ni-2 fiber reached to 614 MPa. In addition, the prepared fibers provided excellent EMI shielding performance (75.6 dB) and high EM absorption loss capability (69.7 dB) due to multiple reflections and refractions of EM waves on the surface, the interfaces, and inside of the fibers. Moreover, the EMI absolute shielding effectiveness ( SSE /t) of rGO@Ni-2 fiber unwoven membrane reached 158 dB·cm 3 /g at a very thin sample thickness of 2.0 mm. Thus, this high EM wave absorbing, low cost and small volume fibers have great potential for usage in EMI shielding materials in aerospace and electronic devices.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2025
·
IF 4.8
Kunpeng Song,Haojie Lin,Qing Guo,Fang Liao,Chunmei Zeng
ZnIn 2 S 4 is a semiconductor photocatalyst with a suitable band gap for renewable energy production. However, its efficiency in photocatalytic hydrogen evolution is limited by the rapid recombination of photogenerated charge carriers. In this study, a ZnIn 2 S 4 @Ni-MOF-74 heterojunction nanocomposite was designed and synthesized via an in-situ hydrothermal growth method. This unique structure promotes intimate interfacial contact between the two materials and ensures a well-aligned band structure. The optimized ZnIn 2 S 4 @Ni-MOF-74 composite achieves a photocatalytic hydrogen evolution rate of 1823.7 μmol·g −1 ·h −1 without the use of precious metal cocatalysts, significantly surpassing that of pristine ZnIn 2 S 4 . Cycling tests demonstrated that the photocatalyst maintains stable performance over 12 consecutive cycles without significant degradation. The enhanced photocatalytic activity can be attributed to the well-matched band alignment and intimate interfacial contact, which collectively facilitate the formation of a type-II heterojunction structure, thereby promoting efficient charge separation and migration.
✓ 已验证
DOI
高影响因子
Welding in the World
·
2025
·
IF 2.5
Zhang Honghui,Xu Hongyan,Hodúlová Erika
To fulfill the requirements for dependable low-temperature soldering of high-temperature lead-free materials and to inhibit the transformation of Cu 6 Sn 5 to Cu 3 Sn during transient liquid phase diffusion bonding (TLPB) and aging processes, along with minimizing joint porosity, Cu particles were initially coated with a Ni layer through electroless plating, followed by Sn layer deposition via stannous sulfamate electroplating to achieve Cu@Ni@Sn core-shell structured powder. The study explored the oxidation resistance of Cu@Ni@Sn powder and examined the formation rate and activation energy of Cu 3 Sn in both Cu@Sn and Cu@Ni@Sn TLPB joints, clarifying the Ni coating’s role in restricting element migration and phase transformation. The Cu@Ni@Sn TLPB joint displayed a three-dimensional network of intermetallic compounds enveloping Cu particles. This joint demonstrated thermal endurance of at least 400 °C, room temperature shear strength exceeding 80 MPa, and shear strength of no less than 28 MPa after aging at 250 °C for 336 h, representing a 20% improvement compared to the Cu@Sn system. Joint porosity was lowered from 10% in the Cu@Sn system to 5% in the Cu@Ni@Sn system, surpassing both high-lead and nano-sintered Ag systems. The findings illustrate that the introduction of a Ni coating successfully restricted Cu diffusion, suppressed Cu 6 Sn 5 phase transformation, decreased void formation, and improved the high-temperature oxidation resistance of Cu@Ni@Sn powder. After undergoing reflow at 250 °C, the Cu@Ni@Sn joint exhibited thermal conductivity of 156 W/m·K and electrical resistivity of 4.2 μΩ·cm, surpassing those observed in the Cu@Sn system, Cu 6 Sn 5 , and Cu 3 Sn. These results imply that Cu@Ni@Sn TLPB joints fulfill the criteria for high-performance interconnections, presenting a viable replacement for high-lead and sintered nano-Ag soldering materials, making them a favorable candidate for high-temperature, high-reliability interconnect applications in power modules.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2024
·
IF 4.1
Qian Zhang,Yanlan Cen,Bo Chen,Jiajin Li,Xinqi Zheng,Xiaoping Wu,Songbai Qiu,Tiejun Wang
Direct synthesis of alternative higher alcohols from aqueous bio-ethanol has received increasing attention because of its promising application in value-add fine chemicals and bio-jet fuels, yet the efficient carbon chain growth towards C6 + higher alcohols still facing great challenges. Herein, the polypropylene-based melt-blown cloth (MB) was adopted as novel precursor to fabricate the high-active Ni@MB catalysts for the direct mild upgrading of aqueous ethanol (50 wt%). Superior higher alcohols yield of 46.9 % with 74.1 % ethanol conversion was achieved at 170 °C over Ni@MB-1/20–500. The nitrogenous MB facilitated the formation of N-doped graphene structure that promoting the aldol-coupling and dehydrogenation capability of Ni@MB. For further enhancing the efficient carbon chain growth towards C6 + higher alcohols, a novel staged-reaction-cooling (SRC) strategy was developed and optimal C6 + higher alcohols selectivity up to 72.1 % with 83.2 % ethanol conversion was achieved. This work gains new insight to mild synthesis of C6 + higher alcohols from readily-accessible bio-ethanol.
✓ 已验证
DOI
高影响因子
ChemistryOpen
·
2025
·
IF 3.1
Chenyun Zhang,Jiahao Wang
Graphical A deep eutectic solvent (DES) prepared by mixing tetraalkylphosphonium chloride ([ P4444 ]Cl) and glycerol is applied in the synthesis of P-doped Ni materials. The DES not only serves as the reaction medium but also participates in the catalyst preparation. The synthesized P-doped Ni catalyst exhibits excellent performance in HER in both acidic and alkaline environments. A deep eutectic solvent (DES) was prepared by mixing tetraalkylphosphonium chloride ([P 4444 ]Cl) and glycerol in a 1:2 molar ratio. Nickel nitrate was dissolved in this DES, and then the mixture was heated at 350 °C to obtain phosphorus-doped nickel catalysts. In this system, the DES plays multiple crucial roles. (1) It serves as a reaction medium, providing a suitable solvent environment for the synthesis of Ni-based catalysts. (2) It actively participates in the catalyst preparation as a reactant. [P 4444 ]Cl acts as a P source, while glycerol effectively promotes the formation of nickel metal as a reducing agent. (3) It exhibits a templating effect, inducing the morphology of product to be a unique thin sheet with angular edges. The synthesized P-doped Ni material exhibits excellent hydrogen evolution performance in water splitting. In an acidic environment, when the current densities reached 10 and 20 mA cm −2 , the overpotentials were only 90.2 and 115.9 mV, with a Tafel slope as low as 55.6 mV dec −1 . In an alkaline environment, the P-doped Ni also performed well. The η 10 and η 20 values were 107.0 and 145.4 mV, respectively. The Tafel slope was 57.0 mV dec −1 .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Energy Chemistry
·
2025
·
IF 14.9
Zhixiao Zhu,Meilian Tu,Yu-wen Hu,Weijiang Gan,Jianqiu Deng,Zhongmin Wang,M.-Sadeeq Balogun
Seawater splitting provides a sustainable approach for large-scale hydrogen production without straining freshwater resources. However, the challenge lies in achieving high catalytic activity and stability due to electrocatalyst deactivation from structural degradation, poor corrosion resistance, and surface instability in both alkaline and seawater electrolysis. To address this, we propose a novel strategy combining Fe-doping with dual-phase lattice strain engineering in nickel-molybdenum transition metal nitrides (TMNs). The Fe-doped Ni 3 Mo 3 N/Mo 2 N electrocatalyst exhibits compressive lattice strains of −4.52% and −2.91% in the Ni 3 Mo 3 N and Mo 2 N phases, respectively, enhancing its structural integrity and electronic properties. Consequently, Fe-Ni 3 Mo 3 N/Mo 2 N achieves low overpotentials of 167 and 371 mV at current densities of 10 and 500 mA cm −2 , respectively, in 1 M alkaline seawater, with exceptional stability over 100 h at 100 and 500 mA cm −2 . Theoretical calculations reveal that these compressive strains optimize the adsorption of OER intermediates and improve catalytic kinetics. This work demonstrates the promise of dual-phase lattice strain engineering in TMNs for efficient, durable, and scalable electrocatalysts in seawater electrolysis, a strategy that has yet to be fully explored for OER.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2025
·Vol. 21
·期 15
·2412473
·
IF 12.1
Xinyu Zhu,Minghao Fang,Bozhi Yang,Shaorou Ke,Meiling Zhan,YuanMeng Wang,Shujie Yang,Xin Li,Yanghong Li,Xin Min
Facing the complex application environment and overall inefficiency in the complete water-splitting process, the development of highly efficient and stable catalytic materials is urgently required. This study innovatively proposes and for the first time implements a rapid synthesis technique driven by microwave-induced sulfur sublimation, successfully preparing MS 2 /RuS 2 (M = Co, Fe, Ni) heterostructure interfaces with high structural stability and uniform active site distribution within merely 60 s. By incorporating iron-group sulfides, the electronic structure of pyrite-type RuS 2 is effectively modulated, enabling the developed MS 2 /RuS 2 @G catalyst to exhibit superior activity in alkaline environments. Particularly, the cobalt-based sulfide regulated pyrite-type RuS 2 (CoS 2 /RuS 2 @G) achieves a mass activity in the hydrogen evolution reaction (HER) that is 15.4 times that of 20 wt.% Pt/C, and in the oxygen evolution reaction (OER), it surpasses commercial IrO 2 by two orders of magnitude. This research not only provides a new pathway for enhancing the performance and environmental adaptability of water-splitting catalysts but also presents a simple and universal method to boost catalytic activity through a synergistic modulation strategy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Guang Yang,Qiang Hu,Haiping Yang,Yang Yang,Wei Cheng,Jiageng Xia,Hanping Chen
Catalytic reforming technology holds significant potential for treating biomass gasification tar. However, the design of catalysts that offer high activity, low carbon deposition, and long-term stability remains a challenge. In this study, Ni@SiO 2 yolk-shell catalysts were synthesized and evaluated for their activity and stability in toluene steam reforming. The Ni@SiO 2 -10 catalyst demonstrated excellent stability and activity, maintaining a 100 % toluene conversion rate over a 120-h test period with virtually no carbon deposition after reforming. In contrast, Ni/SiO 2 and Ni/Al 2 O 3 catalysts, synthesized by incipient wetness impregnation, showed significant sintering and carbon deposition after use. Under identical support conditions, Ni@SiO 2 reduced the initial reaction temperature for toluene steam reforming from 462 °C to 418 °C. Increasing the Ni loading significantly enhanced the number of active sites, decreased the size of the SiO 2 microspheres, and thinned the SiO 2 shell layer, thereby elevating the toluene conversion from 72 % to 100 %. Both temperature and the GHSV (gas hourly space velocity) had a significant impact on catalytic performance, with conversion rates stabilizing at 700 °C and an GHSV = 24500 h −1 . The yolk-shell structure of Ni@SiO 2 promoted high Ni dispersion, reducing aggregation and carbon deposition, which were key to its high activity and stability. These findings are crucial for the development of catalysts for biomass tar reforming.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Guanghui Cong,Lujun Huang,Guobo Yang,Jinpeng Song,Shaoshuai Liu,Yating Huang,Xin Zhang,Zheyuan Liu,Lin Geng
Li-rich layered oxides (LRLOs), with the advantages of high specific capacity and low cost, are considered as candidates for the next-generation cathode of lithium-ion batteries (LIBs). Unfortunately, sluggish kinetics and interfacial degradation lead to capacity loss and voltage decay of the material during cycling. To address these issues, we propose a Ni/Mg dual concentration-gradient modification strategy for LRLOs. From the center to the surface of the modified materials, the contents of Ni and Mg are gradually increased while the content of Mn is decreased. The high Ni content on the surface increases the proportion of cationic redox, elevating the operating voltage and accelerating reaction kinetics. Moreover, the doped Mg on the surface of the material acting as a stabilizing pillar suppresses the migration of transition metals, stabilizing the layered structure. Therefore, the material with the Ni/Mg dual concentration-gradients delivers a superior electrochemical performance, exhibiting a suppressed voltage decay of 2.8 mV per cycle during 200 cycles (1 C, 2–4.8 V) and an excellent rate capability of 94.84 mAh/g at 7C. This study demonstrates a synergic design to construct high-performance LRLO cathode materials for LIBs.
✓ 已验证
DOI
PubMed
高影响因子
Small
·
2024
·
IF 13
Hongbo Zhang,Yiting Zhao,Zhenfeng Cheng,Jingyun Jiang,Jianwei Fu,Qun Xu
To meet the industrial demand for overall water splitting, oxygen evolution reaction (OER) electrocatalysts with low-cost, highly effective, and durable properties are urgently required. Herein, a facile confined strategy is utilized to construct 2D NiFe 2 O 4 /Ni(OH) 2 heterostructures-based self-supporting electrode with surface-interfacial coengineering, in which abundant and ultrastable interfaces are developed. Under the high molar ratio of Ni/Fe, both spinel oxide and hydroxides phases are formed simultaneously to obtain 2D NiFe 2 O 4 /Ni(OH) 2 heterostructure. The in-depth analysis indicates that the NiFe 2 O 4 /Ni(OH) 2 interface displays strong electronic interactions and triggers the formation of crystalline-amorphous coexisting catalytic active NiOOH. Meanwhile, the stable catalyst-collector interface favors the electron transfer and oxygen molecules transport. The resultant 2D NiFe 2 O 4 /Ni(OH) 2 @CP electrode exhibits superior OER performance, including a low overpotential of 389 mV and a long operating time of 12 h at 1 A cm −2 . This work paves a novel method for fabricating efficient and low-cost electrocatalysts for electrochemical conversation devices.
✓ 已验证
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Tian Meng,Qun Li,Mengxia Yan,Dewen Wang,Libing Fan,Xiaojuan Liu,Zhicai Xing,Xiurong Yang
Self-reconstruction of oxygen evolution reaction (OER) catalyst, especially metal (oxy)hydroxides or oxides, has attracted much attention. Herein, an in-situ self-reconstruction process for Ni, Fe, Zn ternary-metal hydroxides (NFZ-TH) involving significant morphology transformation, and self-modulated electronic structure change of Ni and Fe owing to the etching of Zn species under anodic polarization potential is revealed. NFZ-TH derived materials, undergoing in-situ self-reconstruction (NFZ-TH-SR), exhibits superior OER performance (η = 217 mV @ j = 10 mA cm −2 geometry ) and excellent stability over a period of ~48 h. Nano-pitted surface resulting from etching of Zn species improves the electrochemical surface area. Meanwhile, in NFZ-TH-SR, large amounts of defects induced defect-/corner-sited Fe and adjustability of NiOOH species are verified by Mössbauer spectra and in-situ Raman spectra respectively. Density functional theory calculations give insight that both defect-/corner- sited Fe and Ni at next-nearest-neighbour defect-site have high activity. This paper helps understand that the proposed in-situ self-reconstruction strategy can improve the electrochemical performance of OER catalysts.
✓ 已验证
DOI
高影响因子