JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2025
·
IF 2.1
Yue Wang,Wenxiu Li,Saisai Wang,Pengfei Wang,Tao Zhang
Ionic liquids (ILs) exhibited enhanced extraction performance compared with traditional organic solvents in azeotropic separation processes. In this paper, three kinds of ILs: 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]), 1-butyl-3-methylimidazolium diethylphosphate ([BMIM][DEP]), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([HMIM][PF6]) were considered as extractants for separate n-heptane and acetone. The effect of temperature (298.15, 303.15, and 308.15 K) on the selectivity and distribution coefficients was then investigated. Liquid–liquid equilibrium (LLE) experiments demonstrated that three ILs proved the separation efficiency for acetone. The experimental data were then regressed and validated using the Othmer–Tobias equation and the Hand equation. In addition, the NRTL (nonrandom two liquids) model was used to correlate the LLE experimental data, and the NRTL parameters are verified through the “GMcal_TieLinesLL” tool. Finally, molecular interaction mechanisms were further elucidated through surface electrostatic potential mapping (ESP) and an independent gradient model based on Hirshfeld partition analysis (IGMH) analysis. This research establishes a theoretical framework for industrial-scale separation of ketone/alkane mixtures while providing valuable insights into structure–property relationships of ILs in separation processes.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2025
·
IF 7.7
Yuxiao Jiang,Kelin Hu,Jing Zhang,Tao He,Bin Yu,Xinyuan Li,Jiarong Yang
This research focused on the synthesis of In 2 O 3 /Ni x O y nanocomposites utilizing the conventional template method. The resulting gas sensor, designed for H 2 detection, demonstrates a sensing behavior that is dependent on temperature. Various characterization techniques were employed to analyze the synthesized In 2 O 3 /NiO composite materials. The results obtained from tests conducted at different temperatures reveal that the sensor maintains a stable n-type response for H 2 at temperatures exceeding 240°C, while exhibiting an atypical p-type response at lower temperatures. This transition in adsorption behavior enables the In 2 O 3 /Ni x O y composites to function as a dual-mode sensor capable of detecting H 2 . The temperature-induced transformation is likely attributable to the interplay of several mechanisms. This article elucidates this phenomenon by examining factors such as activation energy, TGA/DSC, adsorbed oxygen, heterojunction formation, and humidity effects. This study contributes to the understanding of the transformation mechanisms underlying MOS gas sensing behavior.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Cleaner Production
·
2025
·
IF 10
Chenguang Wang,Yajing Wang,Qunying Yang,Taiping Xie,Zhongping Yao,Qixing Xia,Jiankang Wang
The unsatisfactory degradation, significant iron leaching and poor recyclability of Fe-based sulfide catalysts for peroxymonosulfate (PMS) activation greatly hinder their wide application. Despite the progress by constructing Fe-based sulfide/carbon composites, the degradation performance is still unsatisfactory and the synergistic mechanism of Fe sites and nitrogen configurations in PMS activation is ambiguous. Herein, using dopamine as C and N source, the magnetic FeS 2 embedded in N doped carbon (FeS 2 @NC) catalyst was prepared by hydrothermal-pyrolytic sulfidation method. The as-synthesized catalyst was systematically characterized by XRD, SEM, TEM, Raman, XPS and BET. The methylene blue (MB) degradation experiment in catalyst/PMS system showed FeS 2 @NC4-500 prepared under 0.4 g sulfur powder and pyrolysis temperature of 500 °C exhibited excellent performance with 94 % MB removal rate within 30 min. The optimal degradation condition was determined to be 0.2 g/L catalyst, 0.3 g/L PMS, 20 mg/L MB and initial pH 7.0. The scavenging experiment of reactive oxygen species (ROS), electron paramagnetic resonance (EPR) and electrochemical measurement confirmed the involvement of sulfate radical (SO 4 · – ), superoxide radical (O 2 · – ) and singlet oxygen ( 1 O 2 ) in MB degradation, but SO 4 · – and 1 O 2 were the major contributors. Combined with the XPS spectra of the fresh and used FeS 2 @NC4-500, the synergistic mechanism with Fe(Ⅱ) and pyrrolic N as active sites for PMS activation was clarified. The degradation intermediates were identified by liquid chromatograph-mass spectrometer (LC-MS) and the possible degradation pathway of MB in FeS 2 @NC4-500/PMS system was proposed. The ecotoxicity of the intermediates was predicted by using the ECOSAR software. This work deciphers the important role of Fe(Ⅱ) and pyrrolic N in PMS activation and can provide a reference for designing highly efficient Fe-based sulfide/N doped carbon hybrid for persistent wastewater remediation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Xin Wang,Xiaoling Ye,Bountheva Louangsouphom,Wenbin Qu,Bingxu Zhang,Huimei Liu
To address the critical limitations of TiO 2 photocatalysts, including insufficient visible-light response and rapid carrier recombination, this study developed a Gd-N co-doped hierarchical porous TiO 2 -macroporous resin (Gd/N/TiO 2 -MAR) composite via a sol-gel hydrothermal method. Multi-scale characterizations (XRD, XPS, BET) revealed that Gd 3 ⁺ doping modulates the band structure and surface properties through 4f-2p orbital hybridization, extending the light response range while suppressing carrier recombination via electron trapping. The hierarchical porous architecture and interfacial synergy significantly enhanced the adsorption-photocatalytic degradation efficiency. Under visible light, the composite exhibited a 1.6-fold higher degradation rate constant for Rhodamine B compared to single N-doped systems, alongside stable performance across a broad pH range (2−12) and under coexisting ion interference. Radical trapping and adsorption-photodegradation kinetic analyses elucidated the cooperative mechanism of interfacial charge transfer and reactive species generation. This work provides new structural design principles for developing efficient multifunctional materials for environmental remediation.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2025
·Vol. 16
·期 1
·1-18
·
IF 15.7
Li Mingyang,Song Xiaorong,Tu Haixia,Sun Jie,Deng Yuanyuan,Wang Bing,Cai Yuhan,Wang Yulian,Li Bin,Wang Yue,Zhang Xiangzheng,Wei Dong,Yang Xiaoyu,Guo Yueshuai,Li Xiang,Gu Jie,Ni Jie,Zhou Yifan,Gu Zhongze,Xie Zhuoying,Li Yan,Guo Xuejiang
Extracellular vesicles (EVs) carry complex glycoproteins critical mediators of disease progression and hold great potential for liquid biopsy applications. However, their low abundance presents significant analytical challenges. This study develop a versatile platform for EV N-glycoproteomic analysis (EVGpro), which enables tandem EV capture, EV protein digestion, and enrichment of N-glycopeptides. Functionalized magnetic nanochains with cell-penetrating peptides (octa-arginine, R 8 ) enable efficient EV isolation, followed by on-chain hydrolysis to expose PEG 2000 for ultrasensitive glycopeptide enrichment. The streamlined EVGpro platform identified up to 17 times more EV glycoproteins than ultracentrifugation across seven biofluids, profiling 398 EV glycoproteins from just 1 μL tear. Applied to seminal plasma, EVGpro uncover disease-specific glycoprotein signatures and identified previously unreported subtypes of asthenozoospermia. This robust and scalable approach advances the sensitive detection of disease biomarkers and molecular subtypes from diverse biofluids to enable precision medicine.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Shu Zhang,Yao Zhang,Feiyang Chen,Juan Yang,Lijin Huang,Yuanyuan Zhang,Nianjun Yang
Caffeic acid is a key indicator of wine quality, but its sensitive and accurate detection remains challenging due to the lack of high-performance sensing materials. Metal/N-doped porous carbon (M/NPC) electrocatalysts with abundant catalytic sites are promising to address this issue. Herein, a FeCo nanoalloy encapsulated in NPC (FeCo@NPC) was designed and synthesized via a “covalent organic framework (COF) adsorption–pyrolysis” strategy. The COF template enabled homogeneous dispersion and stabilization of FeCo. The resulting FeCo@NPC exhibited hierarchical porosity, abundant metal–N x sites, and strong bimetallic synergetic effects, leading to exceptional electrocatalytic activity towards caffeic acid oxidation. The constructed sensor achieved high sensitivity (5.195 and 0.895 μA μM −1 ) and selectivity. It was successfully applied for caffeic acid detection in commercial tablets and wines, and further tracked changes in caffeic acid concentration in red wine over post-opening time. This work provides a general design strategy for designing high-performance electrocatalysts for food quality control.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Shuaishuai Guo,Fangyuan Chang,Guowen Peng,Ping Cao,Wenjie Lu,Yanlu Lu,Jie Jiang,Qingyan Zhang,Qingyi Zeng
To meet the pressing demands of sustainable nuclear energy development and radioactive pollution mitigation, the development of high-efficiency adsorbents for uranium extraction from real wastewater is paramount. In this study, a MNP@NHCS adsorbent was engineered through a carrier-supported strategy involving in-situ growth of δ-MnO 2 nanoplates (MNP) on N-doped hollow carbon spheres (NHCS). Material characterization confirmed that NHCS suppresses δ-MnO 2 agglomeration and enhances the specific surface area to 218.22 m 2 /g (3.5-fold higher than pristine δ-MnO 2 62.28 m 2 /g). Batch experiments demonstrated exceptional performance: excellent U(VI) adsorption capacity (423.61 mg/g), outstanding selectivity ( K d = 1.9 × 10 5 mL/g), robust recyclability (>95 % removal over 8 adsorption-desorption cycles), and real wastewater breakthrough (95 % uranium recovery rate: 0.21 mg U(VI) / 100 mg ads.). Comprehensive characterization, multi-model fit analysis and in-situ zeta potential monitoring revealed that U(VI) capture follows a spontaneous, endothermic monolayer process driven by coordination-electrostatic synergy between Lewis acid-base sites (Mn-O, -OH, and -NH 2 ) and electrostatic attraction. This work provides an efficient, stable, and eco-friendly adsorbent for real wastewater treatment in the nuclear industry, advancing uranium resource recovery and sustainable nuclear energy development.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHEMISTRY COMMUNICATIONS
·
2025
·
IF 4.2
Lin Wang,Hai Yu,YaXin Wang,Miao Chun,QianQian Lei,XinPing Yao,XiaoChen Yao,Xin Wei,JianGuo Lv,Yan Xue,JingWen Zhang,SiWen Zhou,DanDan Qu
This study synthesized p-type Cu 2 O using an electrodeposition method and firmly attached it to TiO 2 nanosheets based on fluorine-doped tin oxide (FTO) substrates, forming a dense film that serves directly as a photoanode for photoelectrochemical (PEC) water splitting. Characterization techniques such as XRD, SEM, XPS, and UV–Vis confirmed the successful deposition of Cu 2 O on the TiO 2 nanosheets, forming a p-n heterojunction structure. The incorporation of Cu 2 O effectively broadened the light absorption range of TiO 2 , with a cut-off wavelength red-shifting to 537 nm, enabling it to absorb more visible light. Photoelectrochemical tests showed that under illuminated unbiased conditions, the photocurrent density of Cu 2 O-TiO 2 reached 0.3 mA/cm 2 , which is 7.5 times that of TiO 2 . After applying a small bias (0.5 V), the photocurrent density further increased to 2.1 mA/cm 2 , 5.2 times that under unbiased conditions, indicating that the introduction of electricity effectively accelerated the separation efficiency of photo-generated carriers. The Cu₂O-TiO₂ heterojunction exhibited significantly higher photocurrent density (measured by LSV) and charge transfer efficiency (evaluated by EIS) than pure TiO₂. This research provides new insights for PEC water splitting technology and serves as a reference for designing high-performance photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
WORLD JOURNAL OF MICROBIOLOGY & BIOTECHNOLOGY
·
2025
·Vol. 41
·期 8
·1-13
·
IF 4.2
Jiang Cheng,Li Luli,Li Jialu
Chitinolytic enzymes are capable of hydrolyzing the cell walls of pathogenic fungi, disrupting the exoskeletons of insect pests, and producing N-acetyl-β-D-glucosamine oligomers or monomers. In this study, a new β-N-acetylhexosaminidase gene encoding an enzyme from glycoside hydrolase family 20 (GH 20) was identified from the biocontrol fungus Chaetomium globosum W7. The corresponding protein was designated CgNagase20 and was heterologously expressed in Escherichia coli . The molecular mass of the protein was approximately 66.7 kDa, and this enzyme exhibited maximal activity at 55 °C and pH 4.0. Heavy metal ions, particularly Fe 3+ , Ag + , and Hg 2+ , were found to strongly inhibit CgNagase20 activity. CgNagase20 exhibits typical substrate specificity of β-N-acetylhexosaminidase (EC 3.2.1.52), acting on N-acetylglucosides and N-acetylgalactosides, with monosaccharides as the sole end products. The Vmax and Km values for CgNagase20 when acting on 4-nitrophenyl N-acetyl-β-D-glucosaminide (pNP-βGlcNAc) were calculated to be 118.85 µmol/min/mg protein and 1.59 mM, respectively. Additionally, CgNagase20 demonstrated antifungal activity, significantly inhibiting spore germination and hyphal growth of Fusarium sporotrichioides , the causative agent of potato dry rot. In conclusion, CgNagase20 represents the first β-N-acetylhexosaminidase identified and characterized from C. globosum , with potential applications in both the industrial and agricultural sectors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COMBUSTION AND FLAME
·
2025
·
IF 6.2
Shubao Song,Lin Zhang,Meishuai Zou,Jiankun Shao
High-temperature gas-phase interactions between chlorine- and nitrogen-bearing species relevant to ammonium-perchlorate (AP) propellant combustion were elucidated by coupling shock-tube laser-absorption measurements with a detailed kinetic model. Time-resolved HCl concentration profiles were obtained for four argon-diluted surrogates—0.3 % NH 3 /0.3 % CCl 4 , 0.5 % NH 3 /0.3 % CCl 4 , 0.2 % NH 3 /0.2 % CCl 4 /0.2 % CH 4 , and 0.2 % NH 3 /0.2 % CCl 4 /0.2 % H 2 —over 1158–1506 K at near-atmospheric pressure. A kinetic model consisting of 164 species and 1358 reactions, assembled from state-of-the-art CCl 4 , H–Cl–O, NH 3 /C 0 –C 2 , and N–Cl sub-models, reproduced the new HCl data alongside literature ignition-delay and speciation measurements with excellent accuracy. Sensitivity and rate-of-production analyses reveal a temperature-robust control structure in which HCl forms almost entirely through Cl-atom abstraction from NH 3 , with Cl supplied by rapid CCl 4 dissociation; the barrierless Cl + H<=>HCl path dominates in H 2 -containing mixtures, whereas competition from Cl + CH 4 <=>CH 3 + HCl moderates HCl growth and channels carbon–nitrogen flux toward toxic HCN when CH 4 is present. Elevated temperature chiefly amplifies Cl production and suppresses NH 2 recombination, accelerating overall reactivity without altering the dominant pathways. The resulting benchmark HCl time-histories and rigorously validated model advance fundamental understanding of chlorine–nitrogen combustion chemistry and provide quantitative guidance for formulating halogenated energetic materials that maximise performance while limiting hazardous by-product formation. Importantly, the mechanism developed here may serve as a transferable gas-phase sub-model for future integration into comprehensive AP combustion frameworks, enabling more predictive simulations of real propellant systems.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Suili Shi,Haiyang Zhai,Congcong Wang,Zhiliang Jin,Guorong Wang
Bimetallic organic frameworks have attracted substantial interest in the supercapacitor domain owing to their extensive specific surface areas and rich porosity. Nevertheless, their practical performance is constrained by inadequate active surface areas and the limited exposure of active sites. Here, NiCo-BTC-0.5 N was prepared via an in situ solvothermal approach with cyanoguanidine introduced as the nitrogen source, which promoted a high density of Co N bonds and induced substantial interfacial reconstruction. This modified structure contributed to enriching electrochemical active surface area compared to the unmodified NiCo-BTC. Electrochemical tests showed that NiCo-BTC-0.5 N exhibits a specific capacitance of 1840.97 F g −1 when tested at 1 A g −1 . It maintains 75.15 % of its rate performance at 20 A g −1 , demonstrating excellent rate performance, and exhibits 95.90 % cycling stability after 5500 charge-discharge cycles. Furthermore, when integrated with an activated carbon anode, it delivers an energy density of 42.13 Wh kg −1 at a power density of 860 W kg −1 . This result shows that doping-induced interfacial reconstruction can significantly enhance material performance and provides a compelling strategy for surface engineering in the development of supercapacitors with enhanced capabilities.
✓ 已验证
产品关联
DOI
高影响因子
GREEN CHEMISTRY
·
2025
·
IF 9.2
Mengran Lou,Ruiying Wang,Luxiang Wang,Yang Wang,Mei Wu,Shengjiao Wen,Xia Kong,Taotao Lv,Bo Ma
Hydrogen has emerged as a promising clean energy source, driving extensive research into efficient electrocatalysts for the hydrogen evolution reaction (HER). This work reports the synthesis of a self-supported Co₂P/nitrogen-doped coal-based carbon fiber catalyst (Co₂P/N-C-CFs(S-ZIF-67)) with cobalt (Co) vacancies via pyrolysis of a nanoscale metal-organic framework (NMOF) precursor. Compared to conventional ZIF-67, NMOF of S-ZIF-67 (40 nm) derives smaller Co2P (7.3 nm), simultaneously generating hierarchical porosity with increased specific surface area. More importantly, the pyrolysis of S-ZIF-67 generates Co vacancies that optimize the electronic structure and increase the active site density of catalyst. Density functional theory (DFT) calculations confirm that these Co vacancies lower the d-band center and promote electron transfer within the catalyst. Furthermore, the N-C-CFs as supporter provides both structural flexibility and tunable hydrogen adsorption Gibbs free energy (ΔGH*). Consequently, Co₂P/N-C-CFs(ZIF-67) exhibits exceptional HER performance in 0.5 M H₂SO₄, requiring only 66 mV overpotential to reach 10 mA cm⁻² current density, and demonstrates remarkable stability for 120 h at 20 mA cm⁻². Notably, it surpasses both Co₂P/N-C-CFs(ZIF-67) and commercial 20% Pt/C under high current densities. This study establishes an effective strategy for designing advanced HER catalysts through precise control of NMOF size and vacancy engineering.
✓ 已验证
产品关联
DOI
高影响因子