Journal of Cleaner Production
·
2025
·
IF 10
Chenguang Wang,Yajing Wang,Qunying Yang,Taiping Xie,Zhongping Yao,Qixing Xia,Jiankang Wang
The unsatisfactory degradation, significant iron leaching and poor recyclability of Fe-based sulfide catalysts for peroxymonosulfate (PMS) activation greatly hinder their wide application. Despite the progress by constructing Fe-based sulfide/carbon composites, the degradation performance is still unsatisfactory and the synergistic mechanism of Fe sites and nitrogen configurations in PMS activation is ambiguous. Herein, using dopamine as C and N source, the magnetic FeS 2 embedded in N doped carbon (FeS 2 @NC) catalyst was prepared by hydrothermal-pyrolytic sulfidation method. The as-synthesized catalyst was systematically characterized by XRD, SEM, TEM, Raman, XPS and BET. The methylene blue (MB) degradation experiment in catalyst/PMS system showed FeS 2 @NC4-500 prepared under 0.4 g sulfur powder and pyrolysis temperature of 500 °C exhibited excellent performance with 94 % MB removal rate within 30 min. The optimal degradation condition was determined to be 0.2 g/L catalyst, 0.3 g/L PMS, 20 mg/L MB and initial pH 7.0. The scavenging experiment of reactive oxygen species (ROS), electron paramagnetic resonance (EPR) and electrochemical measurement confirmed the involvement of sulfate radical (SO 4 · – ), superoxide radical (O 2 · – ) and singlet oxygen ( 1 O 2 ) in MB degradation, but SO 4 · – and 1 O 2 were the major contributors. Combined with the XPS spectra of the fresh and used FeS 2 @NC4-500, the synergistic mechanism with Fe(Ⅱ) and pyrrolic N as active sites for PMS activation was clarified. The degradation intermediates were identified by liquid chromatograph-mass spectrometer (LC-MS) and the possible degradation pathway of MB in FeS 2 @NC4-500/PMS system was proposed. The ecotoxicity of the intermediates was predicted by using the ECOSAR software. This work deciphers the important role of Fe(Ⅱ) and pyrrolic N in PMS activation and can provide a reference for designing highly efficient Fe-based sulfide/N doped carbon hybrid for persistent wastewater remediation.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Shu Zhang,Yao Zhang,Feiyang Chen,Juan Yang,Lijin Huang,Yuanyuan Zhang,Nianjun Yang
Caffeic acid is a key indicator of wine quality, but its sensitive and accurate detection remains challenging due to the lack of high-performance sensing materials. Metal/N-doped porous carbon (M/NPC) electrocatalysts with abundant catalytic sites are promising to address this issue. Herein, a FeCo nanoalloy encapsulated in NPC (FeCo@NPC) was designed and synthesized via a “covalent organic framework (COF) adsorption–pyrolysis” strategy. The COF template enabled homogeneous dispersion and stabilization of FeCo. The resulting FeCo@NPC exhibited hierarchical porosity, abundant metal–N x sites, and strong bimetallic synergetic effects, leading to exceptional electrocatalytic activity towards caffeic acid oxidation. The constructed sensor achieved high sensitivity (5.195 and 0.895 μA μM −1 ) and selectivity. It was successfully applied for caffeic acid detection in commercial tablets and wines, and further tracked changes in caffeic acid concentration in red wine over post-opening time. This work provides a general design strategy for designing high-performance electrocatalysts for food quality control.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Cell Death & Disease
·
2025
·Vol. 16
·期 1
·1-11
·
IF 9.6
Chu Xiufeng,Zhang Ting,Bukhari Ihtisham,Hu Mei,Xu Jixuan,Xing Yamin,Liang Xinfeng,Zhang Zisen,Zheng Pengyuan
Gasdermin D (GSDMD) is a critical pyroptosis mediator, consisting of one N-terminal pore-forming domain and one C-terminal auto-inhibitory domain. The free N-terminal domain (GD-NT), which is released through caspase-1/11 cleavage, exhibits distinct features from the full-length GSDMD (GD-FL), including oligomerization, membrane translocation, and pore-formation. However, the underlying mechanisms are not well elucidated. Here, we found that GD-NT, but not GD-FL, was massively ubiquitinated in cells. The K63-linked polyubiquitination of GD-NT at Lys236/237 (human/mouse), catalyzed by TRAF1, directly prompted its membrane translocation and pore-formation during pyroptosis. Inhibition of GD-NT ubiquitination via site-directed mutations or the UBA1 inhibitor PYR-41 suppressed cell death in several pyroptosis cell models. Additionally, applying PYR-41 in septic mice efficiently suppressed the release of IL-18 and TNFα. Thus, GD-NT ubiquitination is a key regulatory mechanism controlling its membrane localization and activation, which may provide a novel target for modulating immune activity in pyroptosis-related diseases.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2025
·
IF 7.7
Yuxiao Jiang,Kelin Hu,Jing Zhang,Tao He,Bin Yu,Xinyuan Li,Jiarong Yang
This research focused on the synthesis of In 2 O 3 /Ni x O y nanocomposites utilizing the conventional template method. The resulting gas sensor, designed for H 2 detection, demonstrates a sensing behavior that is dependent on temperature. Various characterization techniques were employed to analyze the synthesized In 2 O 3 /NiO composite materials. The results obtained from tests conducted at different temperatures reveal that the sensor maintains a stable n-type response for H 2 at temperatures exceeding 240°C, while exhibiting an atypical p-type response at lower temperatures. This transition in adsorption behavior enables the In 2 O 3 /Ni x O y composites to function as a dual-mode sensor capable of detecting H 2 . The temperature-induced transformation is likely attributable to the interplay of several mechanisms. This article elucidates this phenomenon by examining factors such as activation energy, TGA/DSC, adsorbed oxygen, heterojunction formation, and humidity effects. This study contributes to the understanding of the transformation mechanisms underlying MOS gas sensing behavior.
✓ 已验证
产品关联
DOI
高影响因子
OPTICAL MATERIALS
·
2025
·
IF 4.2
Jingyan Yu,Rajendran Kalimuthu,Xingchen Liu,Wengao Zhang,Yonggen Tan,Kun Yan,Shenglin Ye,Jun Feng
Carbon quantum dots (CQDs) hold great potential as fluorescence probes due to their tunable optical properties, but remain challenges in tailoring surface functionalization for selective metal ion detection, which is essential for environmental monitoring and water quality analysis. This work, synthesized nitrogen and sulfur co-doped carbon quantum dots (N, S-CQDs) were via a one-pot solvothermal method with two different solvents, N, N-dimethylformamide (DMF) and acetone. The influences of solvent selectivity on the surface functionality of CQDs and their fluorescence quenching mechanisms were evaluated in both experimental and computational methods. To represent CQDs surfaces, density functional theory (DFT) calculations of the total density of states (TDOS) and partial density of states (PDOS) were conducted. Our findings revealed that synthesized CQDs in DMF and acetone exhibited fluorescence quenching as static and dynamic. We have achieved the highest quantum yields of 37.85 % and 28.59 %. This shows excellent sensitivities of Fe 3+ at 0.82 μM and 1.19 μM for Co 2+ . Furthermore, the study extended to validated in real water sample analysis. This approach enabled the development of a novel strategy for the selective and sensitive detection of Fe 3+ and Co 2+ ions.
✓ 已验证
产品关联
DOI
高影响因子
Science Bulletin
·
2024
·
IF 18.8
Xia Jie,Zhang Lixing,Zhu Wucheng,Tu Juchuanli,Peng Xilei,Deng Qiaodan,Li Siqin,He Xueyan,Dong Haonan,Liu Cuicui,Chen Xian,Xu Jiahui,Ma Wei,Xiao Yi,Liu Wen,Hu Guohong,Jiang Yi-Zhou,Chen Ceshi,Bian Xiu-Wu,Shao Zhi-Ming,Liu Suling
Neurotransmitters are increasingly recognized to play important roles in limiting anti-tumor immunity. N-acetyl-aspartyl-glutamate (NAAG) has been extensively studied in neurological disorders; however, its potential role in restricting anti-tumor immunity has not been investigated. Here, we demonstrated that NAAG or its synthetase RimK-like family member B (RIMKLB) significantly disrupted anti-tumor immunity by rewiring the myeloid progenitor differentiation of polymorphonuclear myeloid-derived suppressor cells (PMN-MDSCs), which in turn promoted breast cancer growth and metastasis. Mechanistically, NAAG sustained the tumor immunosuppressive microenvironment by activating an NR2B-containing NMDA receptor (NR2B-NMDAR)-dependent p38-NOTCH1 axis, and subsequently stimulating tumor cell migration and invasion, as well as inducing PMN-MDSC differentiation and expansion. In mouse models, RIMKLB ablation or NMDAR inhibition enhanced the efficacy of anti-PD-1 therapy and suppressed tumor progression. An analysis of clinical samples revealed that high levels of NAAG and NR2B-NMDAR predicted a poor prognosis in TNBC patients. Collectively, our findings have uncovered a signaling role for tumor-derived NAAG beyond its classic function as a neurotransmitter that can be targeted pharmacologically to enhance immunotherapy against breast cancer.
✓ 已验证
DOI
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2025
·
IF 5.4
Junjie Ma,Wei Li,Xiaoqi Lan,Zheng Liu,Fenghai Zhou,Mingjun Lu,Guo-Cheng Han
The Na 3 V 2 (PO 4 ) 2 F 3 /Co/N-PC composite was prepared based on nitrogen-doped porous carbon materials containing cobalt (Co/N-PC), which is obtained through high-temperature pyrolysis of bimetallic Co/Zn-MOF. The electrochemical test results showed that the discharge specific capacity of Na 3 V 2 (PO 4 ) 2 F 3 /Co/N-PC composite was 126.66 mAh/g at 0.1C, an increase of 15.6 % compared with Na 3 V 2 (PO 4 ) 2 F 3 /N-PC(109.56 mAh/g). The capacity retention rate was 91.84 % after 100 cycles and the R SEI of the Na 3 V 2 (PO 4 ) 2 F 3 /Co/N-PC composite (48.62 Ω) outperforms that of the Na 3 V 2 (PO 4 ) 2 F 3 /N-PC composite (81.55 Ω). This work applied the metal/carbon hybrid materials obtained through high temperature pyrolysis of bimetallic organic frameworks were employed in sodium-ion batteries, thereby offering enhanced potential for the advancement of sodium-rich phosphoric acid modified materials.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Polymer Materials
·
2025
·
IF 4.7
Nan Hai,Jianlei Lu,Yang Li,Yan Wang,Jiawei Zhang
In this study, we developed a poly(N-isopropylacrylamide)(PNIPAm) microgel-based hydrogel with thermo- and salt-responsive dual shape memory performance and anticounterfeit capabilities. A series of PAAm-MG hydrogels were fabricated by introducing PNIPAm microgel into the PAAm network. The hydrophobic aggregation of PNIPAm chains could be induced by both temperature and salt, serving as temporary crosslinks to stabilize the temporary shapes, and resulting in shape recovery triggered by cooling and water. The shape memory properties could be regulated by both the PNIPAm microgel content and the NaCl solution concentration. Moreover, secret information could be encoded on the surface of the hydrogel via salt printing at room temperature, due to the local phase transition of PNIPAm chains. The encoded information could be encrypted in a warm environment, decrypted in cold water at 25 °C, and erased over time due to salt diffusion, achieving temporary information display.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2025
·
IF 6.9
Yao Yu,Zhifeng Zhang,Yijun Cao,Wei Sun,Zhiyong Gao,Haisheng Han,Pan Chen,Jian Cao
To improve the separation of ilmenite from its associated gangue mineral titanaugite through selective flotation, a novel hydroxamic acid derivative, N-hydroxy-3-(4-methoxyphenyl) acrylamide (HMPA), was successfully synthesized and evaluated as an efficient collector. Comparative flotation tests demonstrated that HMPA outperformed conventional sodium oleate, achieving superior separation efficiency with a TiO 2 concentrate grade of 48.95 % and an impressive recovery rate of 76.0 %. To understand the underlying mechanisms, the interactions between HMPA and the mineral surfaces were investigated meticulously by adsorption capacity tests, contact angle analysis, FTIR, and XPS. The results of contact angle and adsorption measurements intuitively revealed that HMPA exhibited significantly greater adsorption capacity on the ilmenite surface compared to titanaugite. FTIR and XPS analyses indicated that HMPA adsorbed strongly onto the ilmenite surface through chelation with reactive Ti and Fe sites. Density functional theory (DFT) calculations further suggested that HMPA could act as a bidentate ligand, forming a stable five-membered chelate structure through interactions with the Ti and Fe active sites on the ilmenite surface. In conclusion, HMPA demonstrated outstanding collecting ability and selectivity, making it a highly promising collector for ilmenite flotation.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Fanshuai Gao,Lijia Liu,Huayu Liu,Yudan Wang,Yawen Liu
In aquatic environments, CH 3 Hg + represents a persistent neurotoxin that proves challenging to eliminate. Despite the extensive efforts made by countries in mercury pollution control, it still poses a significant threat to ecological health in some underdeveloped countries and regions. This study introduces a novel amorphous coordination polymer (BD-ACP-A), synthesized through a coordination reaction involving bis(4-hydroxyphenyl) disulfide, adenine, and Cr(NO 3 ) 3 ·9H 2 O. The resulting material exhibited exceptional adsorption performance for CH 3 Hg + across a wide pH range of 2 to 11. At an initial concentration of 300 ppb, adsorption equilibrium was reached within 30 min, with an adsorption capacity exceeding 1460 μg·g −1 and a removal rate surpassing 98.0 %. BD-ACP-A also demonstrated remarkable anti-interference capabilities, maintaining high adsorption efficiency in the presence of elevated concentrations of humic acid or NaCl, as well as in various real water samples. Furthermore, it exhibited excellent reusability; at an initial concentration of 160 ppb, it retained an adsorption capacity of 718 μg·g −1 and a removal rate exceeding 89.8 % after 10 adsorption-desorption cycles. The adsorption process was well described by the Langmuir isotherm and pseudo-second-order kinetic models, yielding a maximum adsorption capacity of 138 mg·g −1 . Mechanistic investigations utilizing FT-IR, XPS analysis and DFT calculations revealed that the adsorption is primarily driven by the synergistic chelation of sulfur atoms and covalent interactions with nitrogen atoms. This work not only provides a highly efficient adsorbent for CH 3 Hg + pollution control but also presents a novel strategy for designing amorphous polymers with broad pH adaptability and rapid adsorption kinetics.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Long Geng,Yun Zhou,Yaowen Zhang,Lipeng Han,Yuankun Liu,Kesheng Hu,Yun Zhou,Fei Wu,Tonghuan Liu,Junqiang Yang,Keliang Shi,Xiaolin Hou
Uranium-235 enrichment generates highly alkaline effluents rich in fluoride and uranyl species, which pose significant challenges to conventional treatment technologies. Herein, we report a polyamine-amide adsorbent (MF-PAA) obtained by densely grafting amide units and multi-level amine groups onto a fluoride-inert, macroporous MA-DVB scaffold, creating a surface rich in O, N multidentate binding sites. MF-PAA exhibits an exceptional adsorption capacity 1.43 × 10 3 mg·g −1 for U(VI), and retains 625 mg·g −1 capacity even under 8000 ppm F − . Even in 0.50 mol·L −1 competing anions, the material removes 80–90% of U(VI) and achieves a distribution coefficient of 5.0 × 10 5 mL·g −1 under cationic competition conditions, confirming outstanding anion tolerance and selectivity. Mechanistic studies combining spectroscopy and density functional theory (DFT) calculations reveal the most stable uranyl-MF-PAA complex (ΔG = −115.66 kJ/mol), in which uranyl coordinates with O and N atoms of two amide groups in adjacent chains, forming six coordination bonds with mixed ionic-covalent character dominated by U 5f/6d, N 2p, and O 2s/2p orbital interactions. In column operation with a continuous 8000 ppm F − influent, MF-PAA recovered 94% of U(VI), and its capacity maintained after 15 days of high-fluoride exposure, confirming its long-term engineering viability. These results underscore MF-PAA as a robust, renewable, and high-capacity adsorbent with strong potential for uranium recovery from fluoride-rich wastewater.
✓ 已验证
产品关联
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2025
·
IF 5.1
Xueyun Han,Xindi Liu,Chen Chen,Changyao Sun,Dong Zhang,Jinming Liu,Zhongjun Ma
In order to alleviate the deteriorating electromagnetic environment, the development of new-type and highly efficient electromagnetic wave absorption (EMA) materials has become the priority among priorities of current research. The multi-form graded porous structure is of vital importance in the field of microwave absorption. Herein, through a series of simple operations, the spherical ZBD800 (ZnS/Bisphenol-S for bridges/Doped with N carbon composite obtained through pyrolysis at 800 °C,) with a porous sheet-like structure on its surface was successfully prepared. By simply adjusting the pyrolysis temperature, it is possible to prepare materials with controllable crystal and morphology. The multi-phase characteristics and porous structure of wurtzite and Zinc sulfide, provide more interfaces for polarization to occur, thereby facilitating the absorption, reflection, and scattering of electromagnetic waves. Here, ZBD800–25 (ZBD800 with a filling rate of 25 wt%) demonstrates the best EMA performance, with a minimum reflection loss (RL min ) of −48.32 dB and an effective absorption bandwidth (EAB) of 4.96 GHz. The EAB of ZBD800–20 (ZBD800 with a filling rate of 20 wt%) can reach an astonishing 6.08 GHz. This study has a wide range of applications and provides a new feasible project for designing lightweight, wide-band absorbing, and tunable microwave absorbers.
✓ 已验证
产品关联
DOI
高影响因子