JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 12
·872
·
IF 2.8
Bao Jiachen,Huang Luying,Liu Yan,Liu Fenghua,Xie Hangxing,Wu Weiping
In this paper, a three-step annealing process was employed to treat IGZO thin-film field-effect transistors (TFTs). We observed that TFTs prepared by an initial high-temperature thermal annealing exhibited a low threshold voltage. By employing a second-step low-temperature annealing, the threshold voltage of the TFT was positively shifted, demonstrating improved turn-off characteristics. However, after this process, a significant decrease in TFT mobility and a change in threshold voltage were observed. By introducing a third 633 nm laser annealing technique, we managed to control the threshold voltage and improve mobility. To investigate the mechanism of the changes in TFT performances up to different post-annealing processes, a series of characterization techniques were employed to explain the TFT performance changes.
研究领域:
材料科学
·
半导体器件
·
薄膜电子学
·
光电子学
·
退火技术
✓ 已验证
DOI
高影响因子
ENVIRONMENT DEVELOPMENT AND SUSTAINABILITY
·
2024
·
IF 4.7
Wang Zheng,Deng Rong
Sustainable development has become mainstream in today’s era, and sustainability education is gradually gaining attention worldwide. This study addresses the issue of significant resource waste and environmental pollution resulting from improper disposal of books idle after use in traditional education. In practice, based on the theory of value co-creation and using perceived value as a design indicator, we have innovatively developed a design proposal consisting of both an online service system and offline community management facilities to effectively address this issue. On the theoretical front, this study further expands the research focus on the theory of value co-creation in traditional research and constructs a community value co-creation reading behavior model, effectively enriching and extending previous research. Through the analysis method of structural equation modeling, the design project was validated, and the results indicate that the value co-creation proposed in this study can effectively promote users’ perception of service price value, quality/performance value, emotional value, and social value. Price value, quality/performance value, and emotional value all positively influence users’ intention to use, while social value indirectly affects intention to use through emotional value. Among these, price value is the core factor influencing users’ intention to use. This provides highly actionable insights for the development of sustainable economies and education.
✓ 已验证
DOI
高影响因子
Soil Ecology Letters
·
2025
·Vol. 7
·期 3
·1-12
·
IF 4.3
Wang Bi,Wang Qian,Wu Debin,Song Li,Yuan Quan
Nanoparticles inhibit anaerobic decomposition of SOM, with a more severe suppression on CO 2 than CH 4 production.
The Prolixibacteraceae in anaerobic paddy soils are sensitive to nanoparticles.
Microbial populations stimulated by nanoparticles probably contribute to the increase of CH 4 /TIC ratio in paddy soils.
Paddy soil is frequently flooded, which leads to anaerobic decomposition of soil organic matter (SOM) to produce CO 2 and CH 4 . Currently, there is limited research about the impact of nanoparticles on anaerobic SOM decomposition and CH 4 production in paddy soil. This study investigates the effects of iron oxide nanoparticles (Fe 3 O 4 NPs) and multi-walled carbon nanotubes (MWCNTs) on anaerobic SOM decomposition in two paddy soils. The findings showed that addition of nanoparticles (Fe 3 O 4 NPs: 0.08% and 0.3%; MWCNTs: 0.05% and 0.2%) reduced methane production by 7.48%–31.72% in Guiyang soil and 3.32%–31.24% in Fuyang soil, with decrease in SOM decomposition of 32.19%–47.87% and 19.60%–33.09%, respectively. However, the CH 4 /TIC (total inorganic carbon) ratio was elevated (by 3.17% to 61.92%) after nanoparticles amendment, suggested that TIC production was more significantly suppressed than CH 4 . The Prolixibacteraceae, which usually involve in organic macromolecule decomposition, decreased in relative abundance with inhibition of CH 4 production by nanoparticles in both soils, suggesting their sensitivity to nanoparticles. In contrast, the relative abundances of many microbial populations increased with the intensified inhibition of soil mineralization by nanoparticles in both soils. Especially, Sedimentibacter and Melioribacterae increased with inhibition of CH 4 by nanoparticles, and Clostridiaceae, Minicystis as well as Rhodomicrobium increased with the CH 4 /TIC ratio in both soils, probably because they might provide substrates for methanogens. These results suggested that nanoparticles not only inhibit the decomposition of SOM but also change the fate of decomposed carbon through modulating microbial populations, leading to a substantial increase in the proportion of CH 4 produced from SOM decomposition.
✓ 已验证
DOI
高影响因子
WATER AIR AND SOIL POLLUTION
·
2026
·Vol. 237
·期 6
·379
·
IF 3
Hou Yushuang,Wu Weili
The need for clean water is the most basic human right. Water scarcity will be one important environmental problem of all countries in the future. Phosphorus in the water environment, come from some untreated industrial, agricultural and domestic wastewater, pose a significant threat to human health and and other biota due to their toxicity. In this study, the modified corn straw biochar (LBC) /sodium alginate (SA) composites (LBS) adsorbents were prepared to remove phosphate from water. The results showed that the best pyrolysis temperature of preparing LBS was 550 °C. When pH was 2 and mass ratio of 550LBC (at 550 °C)/SA was 0.3 g/0.3 g, the adsorption capacity and removal efficiency of phosphate by 550LBS were 61.4 mg/g and 92%, respectively. The adsorption of phosphate by 550LBS was consistent with Langmuir model and pseudo 1st order model (R 2 > 0.95), and reached adsorption equilibrium at 20 min, indicating that 550LBS was monolayer adsorption, physical adsorption was the main adsorption and chemical adsorption was the secondary adsorption. The adsorption of 550LBS was the protonation between surface hydroxyl group and H + , the phosphate adsorption of 550LBS was dominated by ligand exchange and electrostatic attraction. Compared with the maximum adsorption capacity of 550LBS, used 550LBS could be reused, the adsorption efficiency of adsorbents after three tests was still above 41%. This showed that reusability and renewability of 550LBS were good, and promotes its application in water purification processes. Graphical
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 3.9
Huang Xing-Wen,Chen Yi-Zhao,Hu Jin-Hong,Liao Song-Yi,Li Yue-Zhu,Liu Rong-Tao,Liu Yi-Dong,Li Shi-dong,Min Yong-Gang
Traditional lithium-ion batteries suffer from poor cycle and rate performance due to low structural stability and the sluggish charge transfer kinetics of cathode during the lithiation and delithiation processes. Polyimide (PI) electrode, known for high theoretical capacity, structural tunability, inherent safety feature and sustainability, have garnered significant attention, offering a promising solution in addressing these issues. Nevertheless, the intrinsic insulation characteristic restricts the capacity of PI material. The emergence of two-dimensional layered Ti 3 C 2 T x MXene with low charge transfer resistance and high electrocatalytic activity is highly suitable for enhancing the electrochemical performance of PI. Therefore, integrating PI with few-layered MXene would combine PI’s abundant redox-active sites with MXene’s excellent conductivity, creating a robust electrode with high capacity, ultrafast kinetics, and cycle durability. Based on this strategy, the hybrid material composed of naphthalene-based PI (NPI) with stable molecular structure and few-layered MXene, denoted as NPI@MXene, has been successfully designed and fabricated through the eco-friendly solid-state polycondensation approach. By adjusting the feed ratio of reactants, the hybrid electrode with 10 wt% MXene (NPI@10%MXene) demonstrates the layer-plus-island-like stable structure and good interaction between NPI and MXene, which delivers the highest rate capacity. Even subjected to a high-current density of 8 A g −1 , the NPI@10%MXene composite maintains 74% (~ 84 mAh g −1 ) of its initial capacity. It also exhibits long-life cycling stability with ~ 77% retention after 5000 cycles (1 A g −1 ). Moreover, the NPI@10%MXene composite reveals enhanced capacitive effect and fast Li + diffusion coefficient during the discharge/charge process (1.43 × 10 –9 /1.43 × 10 –9 cm 2 s −1 , respectively), outperforming those of pristine NPI. The above experimental results highlight remarkable potential of NPI@10%MXene for application in ultrafast Li + storage. Thus, NPI@10%MXene cathode offers a viable strategy to reconcile rapid electrochemical reaction with long-term stability in sustainable rechargeable batteries.
✓ 已验证
DOI
高影响因子
Nano-Micro Letters
·
2026
·Vol. 18
·期 1
·145
·
IF 36.3
Zhai Rui,Wen Zhuorui,Zhao Xuewen,She Junyi,Gu Mengyue,Bu Fanqi,Huang Chang,Meng Guodong,Cheng Yonghong,Zhang Jinying
Violet arsenic phosphorus (VP-As) single crystals were synthesized and characterized by single crystal X-ray diffraction to be P 83.4 As 0.6 (CSD-2408761), the P12 is occupied by arsenic/phosphorus as a mixed occupancy site.
The p-type VP has been switched into n-type VP-As, the effective electron mass was significantly reduced and resulted in high electron mobility of 2622.503 cm 2 V −1 s −1 .
High electron mobility of 137.06 cm 2 V −1 s −1 has been achieved from field effect transistor, much higher than the hole mobility of VP.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2026
·
IF 12.6
Wu Zhiming,Zeng Jiamin,Feng Longbao,Zhu Xiongjie,Guo Rui,Feng Weici,Deng Wei
Non-muscle-invasive bladder cancer (NMIBC) carries 70% incidence yet remains plagued by high recurrence because single-modality chemotherapy or immunotherapy is crippled by rapid urinary clearance, poor tumor specificity, and narrow therapeutic windows. To overcome these challenges, we develop a homologous-targeted cerium nanozyme (HMZCO/DS@CM) that co-loads doxorubicin and the STING agonist MSA-2 in Mn/Zr-co-doped CeO₂ cores camouflaged with tumor-cell membranes. We discover that Mn/Zr substitution accelerates Ce³⁺/Ce⁴⁺ redox cycling, sustaining peroxidase- and SOD-like activities to deplete glutathione and amplify reactive oxygen species, thereby synchronizing immunogenic cell death with STING activation. The tumor cell membrane coating prolongs circulation, evades immune recognition, and directs NMIBC-homing, enabling pH-responsive, spatially and temporally controlled delivery co-release of both drugs within tumors. In orthotopic NMIBC models, HMZCO/DS@CM achieves five-fold tumor enrichment versus monotherapy, unleashes potent systemic immunity, blocks recurrence and metastasis with negligible toxicity. Collectively, this catalytic nanozyme–membrane nanoplatform transforms intravesical instillation into a sustained-release chemo-immunotherapy depot, reactivating local antitumor immunity and reducing NMIBC recurrence, thereby offering a practical adjuvant strategy with minimal systemic impact. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2026
·
IF 3.5
Zhang Qing,Du Xinyu,Wang Guirong,Wang Yanji
Pentamethylene-1,5-diisocyanate (PDI) is a novel raw material for producing high-performance polyurethane. The current industrial production method, the phosgene process, poses significant safety hazards and environmental pollution risks. Consequently, the non-phosgene methods for synthesizing isocyanates from amines and dimethyl carbonate have garnered attention. In this study, catalyst sodium methoxide was used for the efficient and green synthesis of pentamethylene-1,5-dicarbamate (PDC) via the methoxycarbonylation of pentane-1,5-diamine (PDA) and dimethyl carbonate (DMC). The effects of reaction conditions on the synthesis of PDC were investigated. Under conditions of a PDA:DMC molar ratio of 1:3.5, 7 wt.% sodium methoxide catalyst (based on the mass of PDA), a reaction temperature of 70 °C, and a reaction time of 3 h, the conversion of PDA and yield of PDC both reached 100%. A kinetic model for the synthesis of PDC was established, yielding activation energies of 30.3 kJ/mol and 42.2 kJ/mol for the first and second reaction steps, respectively. The kinetic model demonstrated excellent agreement with experimental data, providing a theoretical basis for subsequent applications of PDC.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 3.9
Fang Junfei,Liu Lei,Yang Hang,Sun Yulong,Feng Rui,Li Liang,Deng Jianping,Gou Yuchun
Graphitic carbon nitride (g-C 3 N 4 ) is a material with a graphite-like layered structure. Due to its non-toxic and harmless nature, stable performance, and visible light response capability, g-C 3 N 4 holds significant application prospects in the field of photocatalysis. In this study, the Sb 2 (S,Se) 3 was coupled with g-C 3 N 4 to construct a heterojunction structure, and the photocatalytic degradation performance of the g-C 3 N 4 /Sb 2 (S,Se) 3 heterojunction materials on organic dye pollutants was investigated. Firstly, the g-C 3 N 4 /Sb 2 S 3 composite samples were prepared using a hydrothermal reaction. Subsequently, the g-C 3 N 4 /Sb 2 (S,Se) 3 heterojunction structures were constructed through selenization, and then they were used in the efficient photocatalytic degradation process of organic pollutants methylene blue (MB) and rhodamine B (RhB). The results indicate that due to the formation of the heterojunction structure, the light absorption performance of the g-C 3 N 4 /Sb 2 S 3 and g-C 3 N 4 /Sb 2 (S,Se) 3 composite materials is significantly strengthened, and the separation ability of the photo-generated carriers is remarkably improved. Therefore, compared with pure g-C 3 N 4 , the photocatalytic degradation activity of the composite system on MB and RhB is outstandingly enhanced. Furthermore, after partially replacing S with Se through selenization, the resulting heterojunction structure exhibits stronger photocatalytic degradation performance. For example, the 4-GSe sample obtained at a selenization temperature of 140 °C can achieve a degradation rate of 96% for MB within 60 min and a degradation rate of 95% for RhB within 90 min. Moreover, the prepared heterojunction structure can still maintain excellent photocatalytic degradation activity even in complex dye wastewater. This study offers innovative insights for the development of high-performance photocatalysts capable of efficiently degrading complex organic dye wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Food Biophysics
·
2026
·Vol. 21
·期 1
·9
·
IF 3.2
Yu Xiaohong,Liu Yanli,Zhao Xin,Liu Jinbin,Dai Xujia,Zhao Xia,Shang Yueling
Sea buckthorn polyphenols demonstrate significant lipid-lowering potential. Although probiotic fermentation has been shown to enhance the bioactivity of food matrices, its effect on the lipid-lowering function of sea buckthorn juice—particularly regarding the cholesterol esterase inhibition mechanism—remains unclear. Optimized fermentation increased total phenolic and total flavonoid contents to 0.531 mg/g and 0.926 mg/g, respectively, while enhancing antioxidant activity (hydroxyl radical scavenging activity reached 90.13%, metal ion-chelating activity of 69.82%), and increased the inhibition rates against lipase (from 87.13% to 98.13%) and cholesterol esterase (from 94.13% to 98.13%). Among polyphenolic components, conjugated phenols exhibited the strongest inhibitory activity (84.1%). Enzyme inhibition and kinetic studies demonstrated that conjugated phenols effectively inhibit cholesterol esterase. Fermented conjugated phenols exhibited competitive inhibition, whereas unfermented conjugated phenols demonstrated mixed inhibition. Fluorescence quenching experiments confirmed that fermentation-derived conjugated phenols form more stable complexes with cholesterol esterase through dynamic quenching, indicating higher binding affinity. In summary, sequential fermentation serves as an effective bioprocessing strategy. By generating competitive inhibitors of cholesterol esterase, it enhances the lipid-lowering activity of sea buckthorn juice, providing a theoretical basis for developing fermented functional beverages to manage hyperlipidemia. Graphical
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 15.7
He Qingyun,Wang Junbo,Wu Mengyang,Zhong Chongyu,Li Lei,Zhao Xiangru,Ding Mengzhu,Yang Pinghui,Li Renzhi,Huang Wei,Qin Tianshi,Wang Fangfang
Formamidinium lead iodide (FAPbI 3 ) perovskite is a leading candidate for high-efficiency solar cells, but its application is hindered by the kinetic instability of its α-phase crystallization. Here, a highly effective strategy for directing the ordered crystallization of α-FAPbI 3 in the n-i-p architecture is developed by incorporating a self-assembled molecule (SAM) into the anti-solvent, unlike conventional phosphate-based SAMs requiring polar protic solvents, the -SCN SAM are processed from non-polar, aprotic solvents compatible with perovskite surfaces. An in-situ formed, self-assembled layer acts as a dynamic template, guiding the top-down crystallization process to yield highly ordered α-phase films. Through a series of in-situ measurements, it is rigorously demonstrated that this SAM treatment suppresses undesirable intermediate phases, accelerates the δ-to-α transition, and strategically slows crystal growth, promoting highly ordered films. This meticulously designed strategy culminates in high-quality perovskite films, enabling single-junction devices with a champion power conversion efficiency (PCE) of 26.18% (certified at 25.67%) and mini-modules with a PCE of 21.70%. These results underscore the power of directed self-assembly in fabricating highly efficient and stable n-i-p perovskite solar cells.
✓ 已验证
DOI
PubMed
高影响因子
Science China-Materials
·
2026
·
IF 7.4
Wang Qianqian,Pan Shifeng,Li Haibo,Zhang Menghuan,Zhou Zhennan,Liu Wei,Ouyang Gangfeng
Organic-inorganic hybrid copper(I) halide semiconductors have attracted extensive attention for applications in phosphor-converted white light-emitting diodes (pc-WLEDs), X-ray imaging, and photodetectors because of their superior photo/radioluminescence, structural diversity, and eco-friendliness. In our previous work, we proposed a novel strategy for synthesizing highly efficient blue-emitting copper(I) halide hybrids by combining coordinated anionic inorganic modules with cationic derivatives. However, the complexity of the synthesis process has limited the practical application of this approach. To address this challenge, we report a facile, efficient, and rapid solution-based ultrasonic treatment method for synthesizing high-performance blue-emitting phosphors with this structural motif using inexpensive and commercially available tetraethylammonium halides (TEAX, X = Cl, Br, and I). The synergistic interplay of ionic and covalent bonds in these compounds endows them with a high photoluminescence quantum yield (PLQY) of 70% and excellent stability. These materials exhibit a thermally activated delayed fluorescence (TADF) mechanism, delivering outstanding performance in pc-WLEDs and X-ray imaging. Their exceptional properties highlight their significant potential for use in optoelectronic devices and X-ray scintillators. This work provides an important reference for the rapid synthesis of high-performance copper(I) halide hybrid phosphors and paves the way for their commercial application.
✓ 已验证
产品关联
DOI
高影响因子