Small
·
2025
·Vol. 21
·期 15
·2412473
·
IF 12.1
Xinyu Zhu,Minghao Fang,Bozhi Yang,Shaorou Ke,Meiling Zhan,YuanMeng Wang,Shujie Yang,Xin Li,Yanghong Li,Xin Min
Facing the complex application environment and overall inefficiency in the complete water-splitting process, the development of highly efficient and stable catalytic materials is urgently required. This study innovatively proposes and for the first time implements a rapid synthesis technique driven by microwave-induced sulfur sublimation, successfully preparing MS 2 /RuS 2 (M = Co, Fe, Ni) heterostructure interfaces with high structural stability and uniform active site distribution within merely 60 s. By incorporating iron-group sulfides, the electronic structure of pyrite-type RuS 2 is effectively modulated, enabling the developed MS 2 /RuS 2 @G catalyst to exhibit superior activity in alkaline environments. Particularly, the cobalt-based sulfide regulated pyrite-type RuS 2 (CoS 2 /RuS 2 @G) achieves a mass activity in the hydrogen evolution reaction (HER) that is 15.4 times that of 20 wt.% Pt/C, and in the oxygen evolution reaction (OER), it surpasses commercial IrO 2 by two orders of magnitude. This research not only provides a new pathway for enhancing the performance and environmental adaptability of water-splitting catalysts but also presents a simple and universal method to boost catalytic activity through a synergistic modulation strategy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Yuanhui Shen,Yunlian Liu,Ying Pan,Hongguang Jin
Chemical looping dry reforming of methane (CL-DRM) represents an innovative CO 2 utilization technology that enables efficient conversion of CH 4 and CO 2 while producing high-quality syngas. To investigate the carbon resistance of oxygen carriers, we present a comprehensive analysis of carbon deposition mechanisms in CL-DRM from both thermodynamic and experimental perspectives, establishing a quantitative correlation between carbon deposition and oxygen carrier characteristics. Experimental validation confirmed the thermodynamic predictions. Utilizing an exsolution strategy, we successfully synthesized nano-Ni-modified iron-based perovskite, which demonstrated exceptional reactivity and carbon resistance at 800 °C. This work provides both theoretical and practical guidance for the development of advanced oxygen carriers in CL-DRM systems.
✓ 已验证
DOI
高影响因子
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2025
·Vol. 41
·期 2
·333-342
·
IF 3
Lin Huahui,Shen Yu,Wei Li,Song Ran,Wu Fan,Wei Peng,Yang Zhenzhong,Ren Yurong,Qu Ke,Ding Zhengping
Ultra-high nickel layered cathodes (Ni⩾95%) have emerged as prospective candidates for next-generation lithium-ion batteries (LIBs) due to their exceptional specific capacity and cost-effectiveness. However, the commercial application of these cathodes has been hindered by several challenges, including structural instability during cycling, high sensitivity to air, and slow Li + migration. In this research, a one-step modification strategy was developed to simultaneously achieve Mg doping and Li 3 PO 4 layer coating for the ultra-high nickel cathodes. Characterization results demonstrated that Mg doping not only alleviates lattice strain changes during the H2–H3 phase transition (H2: the second hexagonal phase; H3: the third hexagonal phase) but also serves as a structural anchor, preventing Ni 2+ migration and occupation within the Li layer. The Li 3 PO 4 surface coating layer acts as an electrochemical shield, protecting against interfacial side reactions and enhancing the Li + diffusion rate. As a result, the LiNi 0.95 Mn 0.05 O 2 cathode, with both internal and external modifications, demonstrates significant improvement in cycling stability (85.7% capacity retention after 100 cycles) and Li + transport performance (130.6 mA·h·g −1 at 10 C, 1 C=189.6 mA·h·g −1 ), providing a solid foundation for the further development and application of ultra-high nickel cathodes.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2024
·
IF 13
Hongbo Zhang,Yiting Zhao,Zhenfeng Cheng,Jingyun Jiang,Jianwei Fu,Qun Xu
To meet the industrial demand for overall water splitting, oxygen evolution reaction (OER) electrocatalysts with low-cost, highly effective, and durable properties are urgently required. Herein, a facile confined strategy is utilized to construct 2D NiFe 2 O 4 /Ni(OH) 2 heterostructures-based self-supporting electrode with surface-interfacial coengineering, in which abundant and ultrastable interfaces are developed. Under the high molar ratio of Ni/Fe, both spinel oxide and hydroxides phases are formed simultaneously to obtain 2D NiFe 2 O 4 /Ni(OH) 2 heterostructure. The in-depth analysis indicates that the NiFe 2 O 4 /Ni(OH) 2 interface displays strong electronic interactions and triggers the formation of crystalline-amorphous coexisting catalytic active NiOOH. Meanwhile, the stable catalyst-collector interface favors the electron transfer and oxygen molecules transport. The resultant 2D NiFe 2 O 4 /Ni(OH) 2 @CP electrode exhibits superior OER performance, including a low overpotential of 389 mV and a long operating time of 12 h at 1 A cm −2 . This work paves a novel method for fabricating efficient and low-cost electrocatalysts for electrochemical conversation devices.
✓ 已验证
DOI
PubMed
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2024
·
IF 5.3
Chenhao Huang,Kaiwen Zhang,Chenxi Zhang,Jing Yan,Hongyuan Fan,Lan Sun,Jun Wang
The extraction and transportation of oil and gas pose significant challenges due to corrosive environments, particularly hydrogen sulfide (H 2 S) exposure. This study investigates the use of polytetrafluoroethylene (PTFE) to enhance the corrosion resistance of nickel‑phosphorus (Ni P) coatings in H 2 S-rich environments. Electroless deposition was employed to prepare Ni-P/PTFE coatings, which were then subjected to simulated H 2 S corrosion tests. Results indicate that the incorporation of PTFE led to a more uniform Ni P coating with reduced porosity, significantly improving corrosion resistance. The coatings exhibited enhanced protective performance by stabilizing corrosion product layers and preventing the formation of corrosion channels. Ni-P-PTFE coatings overcame the existing research challenge of Ni P coatings' corrosion in H2S environments, showing no penetration of the corrosive medium into the substrate after 720 h of immersion. The corrosion rate of the coating is only 0.0261 mm/year, only 4.27 % of the corrosion rate of the L245NS substrate in the early stage of corrosion. Moreover, after characterization by SEM, XRD and XPS, it was found that the presence of PTFE altered the corrosion mechanism, promoting the formation of stable nickel sulfide and oxide layers on the surface. This study sheds light on the mechanisms underlying PTFE-enhanced corrosion resistance in Ni P coatings, offering promising implications for extending the lifespan of equipment in the oil and gas industry.
✓ 已验证
DOI
高影响因子
ChemistryOpen
·
2025
·
IF 3.1
Chenyun Zhang,Jiahao Wang
Graphical A deep eutectic solvent (DES) prepared by mixing tetraalkylphosphonium chloride ([ P4444 ]Cl) and glycerol is applied in the synthesis of P-doped Ni materials. The DES not only serves as the reaction medium but also participates in the catalyst preparation. The synthesized P-doped Ni catalyst exhibits excellent performance in HER in both acidic and alkaline environments. A deep eutectic solvent (DES) was prepared by mixing tetraalkylphosphonium chloride ([P 4444 ]Cl) and glycerol in a 1:2 molar ratio. Nickel nitrate was dissolved in this DES, and then the mixture was heated at 350 °C to obtain phosphorus-doped nickel catalysts. In this system, the DES plays multiple crucial roles. (1) It serves as a reaction medium, providing a suitable solvent environment for the synthesis of Ni-based catalysts. (2) It actively participates in the catalyst preparation as a reactant. [P 4444 ]Cl acts as a P source, while glycerol effectively promotes the formation of nickel metal as a reducing agent. (3) It exhibits a templating effect, inducing the morphology of product to be a unique thin sheet with angular edges. The synthesized P-doped Ni material exhibits excellent hydrogen evolution performance in water splitting. In an acidic environment, when the current densities reached 10 and 20 mA cm −2 , the overpotentials were only 90.2 and 115.9 mV, with a Tafel slope as low as 55.6 mV dec −1 . In an alkaline environment, the P-doped Ni also performed well. The η 10 and η 20 values were 107.0 and 145.4 mV, respectively. The Tafel slope was 57.0 mV dec −1 .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2025
·
IF 8.3
Guang Yang,Qiang Hu,Haiping Yang,Yang Yang,Wei Cheng,Jiageng Xia,Hanping Chen
Catalytic reforming technology holds significant potential for treating biomass gasification tar. However, the design of catalysts that offer high activity, low carbon deposition, and long-term stability remains a challenge. In this study, Ni@SiO 2 yolk-shell catalysts were synthesized and evaluated for their activity and stability in toluene steam reforming. The Ni@SiO 2 -10 catalyst demonstrated excellent stability and activity, maintaining a 100 % toluene conversion rate over a 120-h test period with virtually no carbon deposition after reforming. In contrast, Ni/SiO 2 and Ni/Al 2 O 3 catalysts, synthesized by incipient wetness impregnation, showed significant sintering and carbon deposition after use. Under identical support conditions, Ni@SiO 2 reduced the initial reaction temperature for toluene steam reforming from 462 °C to 418 °C. Increasing the Ni loading significantly enhanced the number of active sites, decreased the size of the SiO 2 microspheres, and thinned the SiO 2 shell layer, thereby elevating the toluene conversion from 72 % to 100 %. Both temperature and the GHSV (gas hourly space velocity) had a significant impact on catalytic performance, with conversion rates stabilizing at 700 °C and an GHSV = 24500 h −1 . The yolk-shell structure of Ni@SiO 2 promoted high Ni dispersion, reducing aggregation and carbon deposition, which were key to its high activity and stability. These findings are crucial for the development of catalysts for biomass tar reforming.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2025
·Vol. 13
·期 33
·27546-27556
·
IF 9.5
Changhu Leng,Huijie Li,Qianfeng Zhou,Chenyang Ma,Yongchao Wang,Shengdong Zhang,Chuanya Li,Wanglei Wang,Zhi-Jun Li
Catalytic upcycling of polyolefin (PO) waste into liquid fuels represents a promising strategy for closing the carbon loop but remains challenged by the reliance on noble-metal catalysts and the generation of low-value gaseous byproducts. Here we report a non-noble metal bifunctional catalyst, Ni–W/ZrO2, featuring Ni metal sites for (de)hydrogenation and WOx acid sites for C–C bond cleavage and isomerization. The catalyst enables complete conversion of low-density polyethylene (LDPE, Mw = 96.4 kDa, Đ = 4.6) under mild conditions (250 °C, 3 MPa H2) within 10 h, affording a high liquid fuel yield of 75.6 wt%. The liquid products are dominated by branched alkanes (C5–C20) with a branching index of 85.6%, affording a high research octane number of 88.9, which is comparable to that of commercial gasoline (86.6). Compared to existing non-noble metal systems, Ni–W/ZrO2 exhibits superior catalytic activity and effectively suppresses methane formation. Mechanistic analyses reveal the generation of partially electropositive Ni species that promote C–H bond activation. The catalyst also demonstrates excellent durability over five consecutive cycles and broad compatibility with various polyolefin wastes, providing a cost-effective and scalable strategy for sustainable plastic waste valorization.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2025
·Vol. 27
·期 10
·1-14
·
IF 2.6
Shi Yuanteng,Li Nan,Chen Jingjie,Liu Lei,Xu Xingjie,Chai Jin,Li Peng
In view of the urgent need for efficient and low-cost treatment of organic pollutants in printing and dyeing wastewater, magnetic porous adsorbents have attracted significant attention owing to their high efficiency and reusability. Herein, magnetic bimetallic zeolitic imidazolate framework (mZIFs) nanoparticles with Fe 3 O 4 cores were synthesized as the initial precursor. Subsequently, the novel hollow mZIFs core–shell nanocomposites (defined as mNCs) were prepared through a mild tannic acid etching method, designed for efficient removal of organic pollutants from wastewater. The mNCs displayed remarkable adsorption potential, reaching up to 879.49 mg/g for methylene blue (MB) and 262.50 mg/g for tetracycline hydrochloride (TC) at 303 K, with adsorption following the pseudo-second-order kinetic model and fitting well to the Langmuir isotherm. Thermodynamic analysis revealed that the adsorption of MB and TC by mNCs proceeds spontaneously through an endothermic process, and the mNCs retained over 80% of their MB removal efficiency even after five adsorption–desorption cycles. These results highlight the potential of mNCs as an efficient and reusable adsorbent for eliminating organic contaminants in wastewater treatment. Graphical
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2024
·
IF 4.1
Qian Zhang,Yanlan Cen,Bo Chen,Jiajin Li,Xinqi Zheng,Xiaoping Wu,Songbai Qiu,Tiejun Wang
Direct synthesis of alternative higher alcohols from aqueous bio-ethanol has received increasing attention because of its promising application in value-add fine chemicals and bio-jet fuels, yet the efficient carbon chain growth towards C6 + higher alcohols still facing great challenges. Herein, the polypropylene-based melt-blown cloth (MB) was adopted as novel precursor to fabricate the high-active Ni@MB catalysts for the direct mild upgrading of aqueous ethanol (50 wt%). Superior higher alcohols yield of 46.9 % with 74.1 % ethanol conversion was achieved at 170 °C over Ni@MB-1/20–500. The nitrogenous MB facilitated the formation of N-doped graphene structure that promoting the aldol-coupling and dehydrogenation capability of Ni@MB. For further enhancing the efficient carbon chain growth towards C6 + higher alcohols, a novel staged-reaction-cooling (SRC) strategy was developed and optimal C6 + higher alcohols selectivity up to 72.1 % with 83.2 % ethanol conversion was achieved. This work gains new insight to mild synthesis of C6 + higher alcohols from readily-accessible bio-ethanol.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Guanghui Cong,Lujun Huang,Guobo Yang,Jinpeng Song,Shaoshuai Liu,Yating Huang,Xin Zhang,Zheyuan Liu,Lin Geng
Li-rich layered oxides (LRLOs), with the advantages of high specific capacity and low cost, are considered as candidates for the next-generation cathode of lithium-ion batteries (LIBs). Unfortunately, sluggish kinetics and interfacial degradation lead to capacity loss and voltage decay of the material during cycling. To address these issues, we propose a Ni/Mg dual concentration-gradient modification strategy for LRLOs. From the center to the surface of the modified materials, the contents of Ni and Mg are gradually increased while the content of Mn is decreased. The high Ni content on the surface increases the proportion of cationic redox, elevating the operating voltage and accelerating reaction kinetics. Moreover, the doped Mg on the surface of the material acting as a stabilizing pillar suppresses the migration of transition metals, stabilizing the layered structure. Therefore, the material with the Ni/Mg dual concentration-gradients delivers a superior electrochemical performance, exhibiting a suppressed voltage decay of 2.8 mV per cycle during 200 cycles (1 C, 2–4.8 V) and an excellent rate capability of 94.84 mAh/g at 7C. This study demonstrates a synergic design to construct high-performance LRLO cathode materials for LIBs.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Bao Zhang,Heng Wen,Keyi Xian,Na Lu,Chao Zheng,Zhiming Xiao,Xinyou He,Long Ye,Jiexi Wang,Lei Ming,Chunhui Wang,Xing Ou
Cobalt-free, nickel-rich layered oxides are attracting extensive interest as cathodes to construct high-energy and sustainable lithium-ion batteries, but the intrinsic structure instability and weakened reaction kinetics deteriorate their application. Nowadays, doping engineering, especially multielement doping, has become an effective modification method for obtaining high-performance Ni-rich materials. Herein, the designed doping strategy with high oxidation states element (Zr 4+ , Mo 6+ ) substituting transition metal element and Mg 2+ replacing Li + in LiNi 0.9 Mn 0.1 O 2 (NM-ZMM) has been designed to enhance its electrochemical properties. The introduced doping elements with high oxidation states can generate the strong metal-O bond, which contributes to suppress the structural collapse induced by internal stress, and then maintain unblock ion channels for NM-ZMM. Meanwhile, the presence of Mg 2+ can also be employed as the pillar ions to reinforce the structure stability, and occupy the Li-sites to inhibit lattice distortion during charging/discharging process. Thus, benefitting from the synergistic reinforcement of co-doping strategy, as-prepared NM-ZMM materials exhibit the prominent capacity retention (87.5 %, 210 cycles, 1C; 85.5 %, 2C, 150 cycles). Thereof, this creative strategy is crucial in strengthening the electrochemical performance of Ni-rich Co-free materials, which contributes to promote the development of high-performance and cost-effective Li-ion storage technology.
✓ 已验证
DOI
高影响因子