Ceramics-Switzerland
·
2026
·Vol. 9
·期 6
·62
·
IF 2.8
Wenhao He,Shaohua Su,Bijun Fang,Shuai Zhang,Xiaolong Lu,Jianning Ding
Lead-free [(Ba0.85Ca0.15)1−1.5xNdx][(Zr0.1Ti0.9)0.995Mn0.005]O3(x mol% Nd/Mn BCZT, x = 0.05, 0.1, 0.5, 1 mol%) ceramics were prepared by the traditional solid-state reaction method, in which the synergistic effects of sintering temperature and Nd/Mn co-doping on the phase structure, microstructural evolution, and electrical properties were systematically investigated. All ceramics exhibit a pure perovskite structure, with the tetragonal (P4mm) phase dominating at room temperature as confirmed by the X-ray diffraction Rietveld refinement. The sintering temperature (1475–1520 °C) is found to be the primary factor governing densification and grain growth, with the relative density peaking at 91.7% for the x = 0.5 mol% sample sintered at 1505 °C. Within this optimized processing window, increasing the Nd content induces a gradual migration of the Curie temperature (TC) toward lower temperatures, accompanied by enhanced relaxor behavior. A highlight of this work is the strategic balance between piezoelectric activity and mechanical quality factor through a “donor–acceptor” co-doping mechanism. Specifically, for the x = 0.5 mol% ceramics, an exceptionally high mechanical quality factor (Qm= 424.5) is achieved for samples sintered at 1490 °C, which is proposed to be associated with the temperature-modulated formation of
✓ 已验证
DOI
高影响因子
Nanomaterials
·
2026
·Vol. 16
·期 13
·805
·
IF 4.8
Guangru Chu,Kaiyi Zhang,Yaru Wu,Siqi He,Zhongkai Liu,Aijiao Wang,Hongji Wang,Liying Cui,Shengkai Liu,Jin Huang,Jinsong Peng,Zhiguo Liu
Hollow mesoporous silica nanoparticles (HSNs) were synthesized via the Stöber method using resorcinol–formaldehyde resin as a template and further developed as a multifunctional nanocarrier for synergistic chemo–photothermal therapy. Docetaxel (DTX) and indocyanine green (ICG) were co-loaded into HSNs as the prodrug and photothermal agent. The loading sequence of these agents can critically affect encapsulation efficiency. Preloading DTX followed by ICG incorporation achieved the highest drug loading (38.65%) and preserved the photoactivity of ICG. The resulting ICG&DTX@NH2-HSNs exhibited strong and stable near-infrared photothermal conversion, as well as pH- and laser-responsive drug release behavior. In vitro studies confirmed efficient cellular uptake by 4T1 tumor cells and enhanced cytotoxicity compared with single treatments. In vivo experiments demonstrated significant tumor growth suppression in 4T1 tumor-bearing mice, with the greatest effect observed under combined ICG&DTX@NH2-HSNs and laser irradiation. Importantly, histological analysis of major organs revealed no obvious toxicity, confirming the biosafety of the present nanoplatform. This study confirmed the potential of hollow mesoporous silica-based nanocarriers as safe and effective platforms for combined chemotherapy and photothermal cancer therapy.
✓ 已验证
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2026
·
IF 5.9
Hao Ai,Qiushuo Li,Lei Xu,Huaqiao Lu,Yaofa Gao,Qiong Wu
Peripheral poly-bromination can significantly enhance the thermal stability of discrete coordination compounds. Here, we compare a pair of strictly isostructural Co(III)-Schiff base complexes that differ only by the presence of 3,5-dibromo substituents on the ligands. Thermogravimetric analysis shows that the onset decomposition temperature increases from approximately 100 °C in the unhalogenated complex to approximately 220 °C in the brominated analogue, accompanied by a shift from multistep to a sharper, more cooperative decomposition profile. Variable-temperature X-ray diffraction indicates improved structural persistence in the brominated crystal. Hirshfeld surface analysis, together with NCI, IGMH, QTAIM, and dispersion calculations, reveals that bromination strengthens the non-covalent interaction network, particularly through increased Br···H contacts and enhanced dispersion forces. Frontier orbital analysis shows a modest lowering of the LUMO energy level. These supramolecular and electronic changes collectively correlate with the observed improvement in thermal stability. This work demonstrates that peripheral poly-bromination offers a practical strategy to enhance the thermal robustness of discrete Co(III)-Schiff base complexes while preserving the core coordination structure.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Junfeng Song,Anming Yang,Yang Song,Xirui Huang,Xingjin Li,Tianzhao Xu,Tiancong Zhao
The treatment of Staphylococcus aureus subcutaneous abscesses is hindered by the protective abscess microenvironment and persistent bacterial colonization. Herein, we present a pH-responsive supramolecular nanoplatform fabricated via single-step coassembly of cationic arginine-derived antimicrobial peptidomimetics (AMPM-1) and natural polyphenols. This process, governed by hydrogen bonding, electrostatic interactions, and hydrophobic packing, effectively masks the cationic charges of AMPM-1, substantially reducing intrinsic hemolytic and cytotoxic properties. In vitro studies demonstrate that the assemblies maintain potent, membrane-disruptive activity against methicillin-resistant S. aureus (MRSA), including dormant and persister subpopulations. In a murine MRSA abscess model, local administration of the quercetin-based assemblies (AMPM-1-QA) simultaneously reduces bacterial burden and attenuates excessive inflammatory signaling. Histological examination confirms accelerated tissue regeneration, characterized by enhanced collagen deposition and anti-inflammatory macrophage polarization. By integrating acid-triggered bactericidal action with polyphenol-mediated immunomodulation, this dual-functional supramolecular strategy offers a promising approach for the stimuli-responsive treatment of recalcitrant localized infections.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2026
·
IF 9.2
Jingyan Tang,Qingguo Xue,Jingsong Wang
High-performance electromagnetic wave (EMW) absorbers are in critical demand to address the escalating electromagnetic pollution and interference issues resulting from the rapid advancement of modern electronic devices and wireless communication technologies. In this work, we report the synthesis of a series of SiO2@Gr/Co-X composite absorbers fabricated via a solution immersion–carbonization strategy. By precisely tuning the loading of magnetic Co nanoparticles, the electromagnetic parameters and microwave absorption properties of the composites were systematically tailored. It is found that SiO2@Gr/Co-20 exhibits strong absorption at 13.43 GHz, delivering a minimum reflection loss (RLmin) of −73.12 dB at a matching thickness of 1.52 mm and an effective absorption bandwidth (EAB) of 4.02 GHz at a matching thickness of 1.34 mm. Mechanistic analysis reveals that interfacial polarization, conductive loss, magnetic loss, and multiple scattering synergistically contribute to the excellent EMW absorption performance. RCS simulations were also conducted to validate their practical application potential. This work not only offers a novel structural modulation strategy for the rational design of efficient EMW absorbers but also establishes a basis for the multifunctional integration of multicomponent heterogeneous composites.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2026
·
IF 4
Qin Zhao,Ruize Sun,Xiaonan Liu,Lexi Tang,Jingge Chen,Jicheng Zhou,Wentao Xu
Propane direct dehydrogenation (PDH) is an important way to prepare propylene (C3H6). However, the conventional thermal catalytic process often has the problems of high reaction temperature and side reactions such as carbon deposition, which makes it difficult to balance the conversion of C3H8 and the selectivity of C3H6. In this work, a new method for direct dehydrogenation of low-temperature and high-efficiency propane (C3H8) to C3H6 by microwave catalysis was proposed, and a Pt-Co/SiBeta+SiC microwave catalyst was developed. The results showed that microwave catalysis significantly improved the C3H8 conversion and C3H6 selectivity of the catalyst, and effectively reduced the reaction temperature. Under 450 °C lowtemperature microwave catalysis (MCRM), the initial conversion of C3H8 was as high as 50.4%, and the initial selectivity of C3H6 was as high as 97.2%. Both are significantly better than the 5.9% initial conversion and 95.6% initial selectivity under conventional thermal catalysis (CRM). It was further found that the microwave irradiation significantly reduced the apparent activation energy of the catalyst from 164.4 kJ•mol -1 under CRM to 68.4 kJ•mol -1 under MCRM. This work provides a new idea for the development of low-temperature and high-efficiency PDH catalytic system, and shows the application potential of microwave catalysis in light hydrocarbon conversion.
✓ 已验证
DOI
高影响因子
BIOMACROMOLECULES
·
2026
·
IF 5.9
Chuchu Chen,Zhu Shan,Yihui Gu,Yuchen Ding,Yiqin Yang,Wenjuan Wu,Yongcan Jin,Sehrish Manan,M. Mostafizur Rahman,Bo Jiang
The controlled-release hydrogel with dual-dynamic-bond networks provides superior tunability and stability through collaborative exchange mechanisms, which are often used for drug release. However, the impact of its multiscale structures involving various orientations and cross-linking densities on release kinetics is still poorly understood. Herein, a dual-dynamic-bond cross-linked hydrogel with tunable structures (orientation and cross-linking density) was developed, where the cross-linked network is formed by imine bonds between aminated lignin and oxidized carboxymethyl cellulose, as well as borate ester bonds between 3-aminophenylboronic acid-grafted sodium alginate and epigallocatechin gallate (EGCG). The results showed that the imine/borate ester cross-linked dual-network hydrogel exhibits pronounced pH responsiveness, enabling synergistic release of lignin and EGCG. Compared with the isotropic structures, the anisotropic hydrogel shows significantly faster release for lignin and EGCG along the aligned microchannels, which is attributed to the shortened mass-transfer pathways. In addition, driven by the stronger interfacial interaction of polar groups, the denser network attributed to the increased freeze–thaw cycles further accelerates the co-release of lignin and EGCG. The release process follows a non-Fickian diffusion mechanism and can be well described by the Korsmeyer–Peppas model. This work establishes a direct structure-release kinetics correlation, paving the way for the design of a dual-dynamic-bond hydrogel for precision delivery.
✓ 已验证
DOI
PubMed
高影响因子
Advanced Science
·
2026
·
IF 14.1
Jiaying Zhang,Junjie Huang,Siying Zhang,Yanjia Cui,Chao Kong,Zijian Peng,Huihui Jiang,Sirui Deng,Zhuoyao Chen,Caili Yang,Ketong He,Zhen Li,Yibing Song,Gongwei Wang,Lin Zhuang
Tandem catalysts represent a promising paradigm for synergistic electrochemical CO 2 reduction (CO 2 RR) to high-value multi-carbon (C 2 ) products, yet coordinate regulation of key intermediates to boost C 2 selectivity remains unclear. Herein, a dual-phase templating coupled with gas-phase reduction strategy is exploited to fabricate a series of CuAg@MSN tandem catalysts with tunable Cu/Ag mass ratios. A volcano-type relationship between catalyst composition and C 2 product selectivity is observed, with CuAg@MSN-3 (15 wt.% Ag, 40 wt.% Cu) delivering the maximum C 2 Faradaic efficiency (FE) of 75.4% at −1.4 V vs RHE. And a high FE of 63.5% and a large partial current density of 330 mA/cm −2 toward C 2 products on CuAg@MSN-3 at a cell voltage of 4.5 V in a membrane-electrode assembly (MEA). In situ infrared spectroscopy and density functional theory (DFT) calculations jointly corroborate that CO generated on Ag sites spontaneously spills over and becomes confined within the mesopores of the MSN framework, markedly promoting CO re-adsorption on adjacent Cu sites and elevating the * CO surface coverage. This intermediate regulation effectively enhances the reaction rate of C─C coupling and consequently boosts C 2 product selectivity. The present work exemplifies a rational, confinement-guided design of tandem catalysts for steering reaction intermediates toward desired multicarbon products.
✓ 已验证
DOI
PubMed
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Fuquan Xiong,Jiamei Yang,Mingen He,Hang Wang,Fuxiang Chu
NPCS were prepared via solvent exchange, hydrothermal treatment and carbonization treatment. • The N and P contents in the NPCS were controlled by the doping amount and carbonization temperature. • The NPCS maintained perfect spherical morphology and good dispersion. • The NPCS-based electrode exhibited excellent electrochemical performance. Lignin-based carbon nanospheres have been considered as ideal electrode materials for supercapacitors because of regular morphology and high specific surface area. Heteroatom-induced defects on the carbon chain can resolve the poor hydrophilicity and surface functional group deficiency of pure carbon nanospheres, improving electrochemical performance. Herein, nitrogen and phosphorus co-doped lignin-based carbon nanospheres (NPCS) with different doping content were constructed by solvent exchange, hydrothermal treatment and carbonization treatment. The results showed that the NPCS could maintained perfect spherical morphology and good dispersion. When the ratio of covalent-bond stabilized lignin nanospheres to ammonium dihydrogen phosphate was 1:1 and the carbonization temperature was 700 ℃, the optimal specific surface area (89.8 m 2 g −1 ) and doping ratio of nitrogen and phosphorus (14 at%) were demonstrated in the NPCS. The obtained NPCS showed excellent capacitance storage capacity (312 F/g at 0.2 A/g) and significant cycle stability (93.7% capacitance retention after 10,000 cycles). The symmetric capacitor assembled based on NPCS had an energy density of 4.9 Wh /kg at the power density of 129.8 W/kg. This is mainly attributed to the fact that the NPCS has a high specific surface area and an enhanced affinity toward K ions. The study presents a novel approach to heteroatom co-doping in lignin-based carbon nanospheres, highlighting their potential for use in electrode materials. Download: Download high-res image (227KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2026
·
IF 2.6
Liezhi Cao,Qiang Gao,Xiaoming Zuo,Yong Kong,Haiying Chen
Iron-based metal organic framework (Fe-MOF) is first synthesized by using tetra(4-carboxyphenyl)-porphyrin (TCPP) as the organic building blocks, which is then co-encapsulated with doxorubicin (DOX) in the oxidized sodium alginate (OSA)/carboxymethyl chitosan (CMCS) hydrogels cross-linked through the Schiff base reaction. The imine bonds (–HC=N–) between OSA and CMCS can be hydrolyzed in the acidic tumor microenvironment (TME), resulting in the release of DOX and Fe-MOF. The Fe-MOF can be further decomposed by the acidic TME to release TCPP and Fe3+. Oxygen molecules are catalyzed to singlet oxygen (1O2) by the photosensitizer TCPP upon exposure to near infrared (NIR) light, and the generated 1O2 can bring about photodynamic therapy (PDT). Additionally, the released Fe3+ can be reduced to Fe2+ by glutathione (GSH), which can react with H2O2 in the TME through the Fenton reaction to generate hydroxyl radicals (·OH) for chemodynamic therapy (CDT). Due to the synergistic therapy of PDT, CDT and chemotherapy, the Fe-MOF/DOX/OSA/CMCS hydrogels exhibit significant cytotoxicity against murine breast cancer cell line 4T1.
✓ 已验证
DOI
高影响因子
Analytical Methods
·
2026
·
IF 3
Ma Juanjuan,Zhaozhou li,Huawei Niu,Wenfen Zhang
The development of sensitive, accurate methods for detecting amphetamine-type stimulants (ATS) has become increasingly urgent, driven by the pressing need to protect human health and environmental safety. However, achieving efficient, selective detection in complex sample matrices remains a major analytical challenge. Magnetic solid-phase extraction (MSPE) offers notable advantages over conventional methods (e.g., LLE, SPE, and DLLME), including shorter extraction times, simpler procedures, and more rapid separation. In this study, a double-shell Fe3O4@SiO2@5F composite was developed via the deposition of a fluorine- and nitrogen-doped polymer onto Fe3O4@SiO2. The characterization confirmed the successful preparation of the coating and showed that the composite material has an adsorption capacity superior to that of traditional materials. An MRM-based GC-MS/MS method was established, for the enrichment and quantification of six ATS, including AMP, MATM, PEA, MDA, MDMA and MDEA. This method exhibits good recoveries, with linear correlation coefficients (R2) ranging from 0.9974 to 0.9999.. The limits of detection (LODs) and quantification (LOQs) were 0.66-1.11 ng mL-1 and 1.98-3.30 ng mL-1, respectively. The adsorption mechanism, explored through theoretical calculations, was consistent with experimental data: kinetics followed the pseudo-second-order (PSO) model, while isotherms followed the Langmuir model. Furthermore, density functional theory (DFT) calculations demonstrated that the adsorption process was synergistically driven by π-π, C-H-π, and hydrogen-bonding interactions. The composite demonstrated excellent stability across ten consecutive extraction-desorption cycles. Moreover, its successful use in real environmental water and biological samples confirmed its practical value. This study underscores the significant potential of the developed composite for the reliable monitoring and screening of trace drugs.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Energy Materials
·
2026
·
IF 5.5
Zhicheng Wang,Fengrui Zhang,Ming Huang,Zhifeng Qin,Xinghui Wang,Jingjing Xu,Ke Wang,Byoungwoo Kang,Xiaodong Wu
Propylene carbonate (PC) is a promising electrolyte solvent with a wide liquid-phase temperature range, which can improve the wide-temperature performance of lithium-ion batteries (LIBs). Unfortunately, PC easily co-intercalates into graphite (Gr) interlayers with Li+ and leads to the exfoliation of the Gr structure. Herein, we demonstrate that an anion-rich artificial solid electrolyte interphase (SEI) on the surface of Gr, constructed by the polymeric ionic liquid (PIL) solid polymer electrolyte (SPE), can significantly suppress co-intercalation of the PC solvent, so that the Gr electrode can adequately work in PC-based electrolytes. This is mainly owing to the PIL SPE layer, which provides a high local concentration of TFSI− anions and selectively excludes the solvent-separated ion pair (SSIP) configuration of Li+-PC from entering the graphite interface. Meanwhile, a robust anion-derived inner SEI layer can be formed on the Gr surface through the preferential decomposition of anions. Therefore, the PIL SPE layer can effectively achieve highly reversible lithiation/delithiation of the Gr electrode in a a PC-based electrolyte. Consequently, the Gr||LiNi0.5Co0.2Mn0.3O2 (NCM523) pouch cell with a a PC-based electrolyte exhibits a high capacity of 3060 mAh, an extremely high CE of ≈100%, and good cycling stability with 97.1% capacity retention after 200 cycles. Acceptable rate capability and good low-temperature performance at –20 °C are also achieved in this pouch cell.
✓ 已验证
DOI
高影响因子