LABORATORY INVESTIGATION
·
2021
·Vol. 101
·期 9
·1118-1129
·
IF 5.662
Wang Xin,Li Xing-Liang,Qin Li-Jie
Myocardial injury is a severe complication of sepsis and contributes substantially to the death of critically ill patients. Long non-coding RNAs (lncRNAs) participate in the pathogenesis of sepsis-induced myocardial injury. In this study, we investigated the role of lncRNA X-inactive specific transcript (XIST) in septic myocardial injury and explored its mechanism. Lipopolysaccharide (LPS)-stimulated H9C2 cells and rats subjected to cecal ligation and puncture (CLP) were used as the in vitro and in vivo models. After exposure to LPS, XIST and c-Fos levels were upregulated, but miR-150-5p was downregulated in H9C2 cardiomyocytes and myocardial tissues. XIST affected viability, apoptosis, and pyroptosis in LPS-challenged H9C2 cells. Moreover, XIST knockdown attenuated LPS-induced injury in H9C2 cells by targeting the miR-150-5p/c-Fos axis. c-Fos could bound to the promoter of the TXNIP/XIST gene and enhanced TXNIP/XIST expression. Silencing of XIST improved cardiac function and survival rate and reduced apoptosis and pyroptosis by regulating the miR-150-5p/c-Fos axis in septic rats in vivo. Taken together, our data show that XIST/miR-150-5p/c-Fos axis affected septic myocardial injury, which may indicate a novel therapeutic strategy for sepsis-induced myocardial injury.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CATALYSIS LETTERS
·
2021
·Vol. 152
·期 1
·75-86
·
IF 3.186
Guang Binxiong,Wu Yuefeng,Liu Weihua,Wang Jianhong,Xiao Yahui,Liu Yong
A series of Brønsted–Lewis acids bifunctionalized heteropolyacid based ionic liquids hybrid solid acid catalysts (BLA-HPA-ILs) were synthesized by combining the Brønsted acidic ionic liquid [Bis–Bs–BDMAEE]HPW 12 O 40 with metallic oxide in different composition ratios and applied in the esterification of cyclohexene to cyclohexyl acetate. Among the synthesized catalysts, the 1 / 2 Cu[Bis–Bs–BDMAEE]HPW 12 O 40 catalyst with Brønsted and Lewis acidities shown the most excellent catalytic performance for the esterification of cyclohexene with acetic acid. The BLA-HPA-ILs catalysts were characterized by elemental analysis, FT-IR, Py-IR, TG, 1 H NMR, SEM and EDX. The effects of reaction temperature, catalyst dosage, and initial reactant molar ratio has been investigated in detail. A pseudohomogeneous (PH) kinetic model was used to correlate the kinetic data in the temperature range of 333.15–363.15 K, and the kinetic parameters were estimated, indicating the results calculated by the kinetic model are well coincidence with the experimental results. Moreover, as a heterogeneous reaction catalyst, 1 / 2 Cu[Bis–Bs–BDMAEE]HPW 12 O 40 could be easily recovered by a simple treatment and reused six times without any obvious decrease in catalytic activity, displaying good reusability. Graphic Abstract
✓ 已验证
DOI
高影响因子
RARE METALS
·
2021
·Vol. 40
·期 12
·3554-3560
·
IF 4.003
Liu Wen-Wen,Pan Jun,Peng Ren-Fu
The shape-dependent performance of metal co-catalysts in photocatalysis has been one of the research focal points in recent years. In this study, PtPd/C 3 N 4 hybrid structures were constructed to reveal the effect of the shape of the PtPd bimetallic co-catalyst on the performance of photocatalytic hydrogen generation. PtPd nanocubes (NCs) and nanotetrahedrons (NTs) were sequentially deposited in situ on the surface of C 3 N 4 nanosheets, establishing a strong contact interface to ensure the smooth transfer of photoinduced electrons. Ultraviolet–visible (UV–Vis) diffuse reflectance spectroscopy and photoelectrochemical experiments revealed that the PtPd NCs/C 3 N 4 photocatalyst had comparable light absorption ability and equivalent carrier separation and transfer efficiency in comparison with the PtPd NTs/C 3 N 4 photocatalyst, which excluded the influence of these factors on shape-dependent performance. The photocatalytic hydrogen generation results indicate that the hydrogen generation rate of the PtPd NCs/C 3 N 4 photocatalyst is 1.33 times higher than that of the PtPd NTs/C 3 N 4 photocatalyst, demonstrating that the cubic PtPd bimetallic co-catalyst is more conducive to hydrogen generation compared to the tetrahedral PtPd bimetallic co-catalyst. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2021
·Vol. 188
·期 6
·1-10
·
IF 5.833
Zhang Ze,Yu Hongwei,Zhang Yingcong,Wang Zhangmin,Gao Hongmin,Rong Shengzhong,Meng Lingqiang,Dai Jianmin,Pan Hongzhi,Chang Dong
A sandwich-format electrochemiluminescence (ECL) immunosensor has been developed for alpha-fetoprotein (AFP) detection based on the use of ordered mesoporous carbon-molybdenum disulfide (OMC-MoS 2 ) as a sensor platform and cuprous oxide @ ordered mesoporous carbon-Ru(bpy) 3 2+ (Cu 2 O@OMC-Ru) composites as signal tags. OMC alongside MoS 2 plays a synergistic role in improving the electrochemical performance of the electrode in the electron transfer process. The uniform cubic-shaped Cu 2 O@OMC-Ru nanocrystals display excellent luminous efficiency, with a signal amplification strategy of OMC-MoS 2 synergistic enhancement and Cu 2 O@OMC which is capable of immobilizing more Ru(bpy) 3 2+ serving as a tracing tag to label antibodies. A detectable ECL emission at a Cu 2 O@OMC-Ru nanocrystals modified electrode is initiated at an applied voltage of +1.15 V (scanning range: 0–1.2 V), in the presence of the tripropylamine (TPA) as coreactant. With the increase in AFP concentration, the loading of Cu 2 O@OMC-Ru at the electrode increases. Afterward, the ECL detection of AFP shows a wide linear range from 0.1 pg/mL to 10 ng/mL with a correlation coefficient of 0.9964 and a detection limit of 0.011 pg/mL (S/ N = 3) under the optimal experimental conditions. The recoveries were in the range 91.2–97.1% with RSD varying from 4.8 to 8.5%. Overall, the novel immunosensor has been successfully applied to the analysis of human serum samples, indicating a great potential for application in clinical diagnostics. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOID AND POLYMER SCIENCE
·
2021
·Vol. 299
·期 8
·1305-1313
·
IF 1.931
Lv Binbin,Wang Hui,He Liang,Nan Xueyan,Wang Tong,Liu Zhizhou,Xia Wei,Bai Pengli
Cross-linked polymer microspheres have potential applications in many fields. Compared with seed polymerization, two-part dispersion polymerization is a very attractive method for preparing micron-sized cross-linked microspheres. However, the current dispersion polymerization would be adversely affected by the addition of more than 1 wt% of cross-linker at a time and even agglutination occurred. In this study, a facile method for the preparation of highly cross-linked microspheres by two-step dispersion polymerization of a chain transfer agent has been developed. The relationship between cross-linker and transfer has been studied in detail, and microspheres can be simultaneously maintained by adding the cross-linker ethylene glycol dimethacrylate (EGDMA) at concentrations of up to 10%.
✓ 已验证
DOI
高影响因子
CATALYSIS SURVEYS FROM ASIA
·
2021
·Vol. 25
·期 4
·399-405
·
IF 3.106
Xiang Ji,Ju Fan,Sun Man,Jin Hao,Cai Wenjie,Lin Jing,Lu Yanzhen,Dong Xiongzi,Dong Huaze,Wang Fankuo
In this work, we developed a simple and effective one-pot method to synthesize the Pd-based bimetallic nanoparticles (NPs) in the presence of polyvinylpyrrolidone (PVP). By using high-resolution transmission electron microscopy (HRTEM), energy-dispersive spectrometry (EDS) mapping and X-ray diffraction (XRD), the morphologies and compositions of the as-prepared bimetallic NPs were investigated in detail. Furthermore, this approach was also used to achieve the highly dispersive Pd-based bimetallic NPs directly on the carbon black. Significantly, the as-obtained carbon-supported Pd-based bimetallic NPs showed excellent electrocatalytic activity for the methanol oxidation. Among the Pd-based bimetallic NPs and the commercial Pd–C, the PdPt–C displayed the best electrocatalytic activity and stability, which may be mainly attributed to the specific nanostructure and the synergetic effect between Pt and Pd atoms.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2021
·Vol. 12
·期 1
·1-10
·
IF 14.919
Liu Chang,Kang Jincan,Huang Zheng-Qing,Song Yong-Hong,Xiao Yong-Shan,Song Jian,He Jia-Xin,Chang Chun-Ran,Ge Han-Qing,Wang Ye,Liu Zhao-Tie,Liu Zhong-Wen
The selective hydrogenation of CO 2 to value-added chemicals is attractive but still challenged by the high-performance catalyst. In this work, we report that gallium nitride (GaN) catalyzes the direct hydrogenation of CO 2 to dimethyl ether (DME) with a CO-free selectivity of about 80%. The activity of GaN for the hydrogenation of CO 2 is much higher than that for the hydrogenation of CO although the product distribution is very similar. The steady-state and transient experimental results, spectroscopic studies, and density functional theory calculations rigorously reveal that DME is produced as the primary product via the methyl and formate intermediates, which are formed over different planes of GaN with similar activation energies. This essentially differs from the traditional DME synthesis via the methanol intermediate over a hybrid catalyst. The present work offers a different catalyst capable of the direct hydrogenation of CO 2 to DME and thus enriches the chemistry for CO 2 transformations.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Food Analytical Methods
·
2021
·Vol. 14
·期 8
·1577-1589
·
IF 3.366
Wang Na,Lu Yanmin,Cui Bo
A β-cyclodextrin functionalised graphene oxide-grafted silica (β-CD@GO/SiO 2 ) sorbent was synthesised and used as a solid-phase extraction (SPE) sorbent for the extraction of trace polycyclic aromatic hydrocarbons (PAHs) from fried food extract. The prepared β-CD@GO/SiO 2 was characterised using Fourier transform infrared spectrometry (FT-IR) and elemental analysis (EA). Compared with graphene oxide-grafted silica (GO/SiO 2 ), the β-CD@GO/SiO 2 had better extraction selectivity for 4- to 5-ring PAHs, which benefitted from the size complementarity between β-CD@GO/SiO 2 and PAHs arising from the introduction of β-CD. In addition, the results of selective extraction were confirmed by theoretical calculation. Following single-factor experiments, response surface methodology (RSM) was used to optimise extraction and elution parameters. Under the optimal conditions, a method was developed to combine the SPE technique with high-performance liquid chromatography (HPLC). Linear ranges of 1–100 and 0.3–100 μg L −1 with correlation coefficients ( R 2 ) ranging from 0.9980 to 0.9995 were obtained. Limits of detection were in the range of 0.1–0.3 μg L −1 . The intra-day and inter-day precisions were less than 3.9 and 5.5%, respectively. In addition, the method was successfully applied to determine PAHs in fried food with satisfactory spiked recoveries.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
·
2021
·Vol. 328
·期 1
·397-410
·
IF 1.371
Wang Yanlin,Long Jun,Xu Wenjie,Luo Huan,Liu Jun,Zhang Yaping,Li Jinchao,Luo Xuegang
The development of highly efficient adsorbent presents an enticing prospect for U(VI)-containing radioactive wastewater treatment. In this work, a novel porous cCS/PVA/UiO-66-NH 2 membrane absorbent comprising of crosslinked chitosan (cCS), polyvinyl alcohol (PVA) and UiO-66-NH 2 is designed and prepared. The adsorption capacity of porous cCS/PVA/UiO-66-NH 2 membrane achieves 316.50 mg g −1 under an optimal condition. Furthermore, the porous cCS/PVA/UiO-66-NH 2 membrane exhibits a high selectivity for U(VI) adsorption in simulated radioactive wastewater treatment. The possible mechanism of U(VI) adsorption onto porous cCS/PVA/UiO-66-NH 2 membrane mainly includes surface complexation and cation exchange processes. In addition, the porous cCS/PVA/UiO-66-NH 2 membrane also exhibits excellent cycling adsorption-desorption performance. All these results demonstrate that the porous cCS/PVA/UiO-66-NH 2 membrane is a promising candidate for application in U(VI) removal from radioactive wastewater.
✓ 已验证
产品关联
DOI
高影响因子
Reaction Kinetics Mechanisms and Catalysis
·
2021
·Vol. 132
·期 2
·1211-1224
·
IF 2.081
Zhang Long,Ge Jianhua,Zhuang Tao,Ding Xiulong,Zheng Xuyang
A series of novel sodium persulfate (Na 2 S 2 O 8 ) modified g-C 3 N 4 photocatalysts were prepared in this study to enhance nitrogen fixation. Characterization results found that the type of precursors and the mass ratio affect the crystal structure, morphology, and optical properties of the modified g-C 3 N 4 . The photocatalysts exhibited considerable nitrogen vacancies (N Vs ) depending on the nature of the different precursors and their mass ratios to Na 2 S 2 O 8 . In addition, the production rate of ammonia of the modified g-C 3 N 4 was significantly higher than that of pure g-C 3 N 4 under optimal conditions. The four cycles show modified g-C 3 N 4 excellent stability. Combined with the results of pH test, the possible mechanism of the photocatalytic nitrogen fixation process using modified g-C 3 N 4 was proposed.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
·
2021
·Vol. 98
·期 1
·224-237
·
IF 2.326
Dong Wei,Qian Fuping,Li Qing,Tang Gang,Xiang Tengfei,Chun Tiejun,Lu Jinli,Han Yunlong,Xia Yongjun,Hu Jia
A high moisture content in the flue gas of iron and steel sintering process causes the issue of filter material pasting, which leads to a decrease in the filtration effect and service life of the filter material. Surface modification of the filter materials is a useful strategy for their hydrophobicity enhancement. Therefore, the Sol–gel method was employed to modify the polyethylene glycol terephthalate (PET) filter with tetraethyl orthosilicate(TEOS) as precursor and perfluorodecyl triethoxysilane (PFDTES) as modifier. Field emission scanning electron microscope (FESEM), Fourier transform infrared spectrometer (FT-IR), and contact angle tester were used to characterize the PET filter materials before and after modification, and exhaustive filter efficiency was evaluated by the comprehensive performance test machine. The particle size and distribution of SiO 2 nanoparticles were analyzed using a nanometer particle size analyzer, the effects of TEOS/PFDTES loading on the hydrophobic performance and filtration performance of the filter material have been discussed. Based on the results of these studies, superhydrophobic stability of the filter material was evaluated. The results show that the microscopic pore structure of PET filter materials was retained after modification. TEOS modified PET (T-PET) filter materials were completely wetted with static contact angle (WCA) of 0°. The surface energy of PFDTES modified PET (F-PET) filter materials was reduced, the WCA was 144.6 ± 1.6° and WSA was 7.6 ± 4.5°. For TEOS/PFDTES co-modified PET (TF-PET), the SiO 2 nanoparticles was modified by the long fluorine chain -CH 2 CH 2 (CF 2 ) 7 CF 3 groups, endowing TF-PET with superhydrophobic property. With the increasing of TEOS loading, TF-PET fiber presented significant enhancement of roughness, while average particle size of SiO 2 nanoparticles on the fiber surface gradually decreased. The particle size distribution first increased sharply, and then, slowly decreased when TEOS addition was enhanced. TF-PET filter material possessed WCA of 163.2 ± 2.3°, while when TEOS: PFDTES mass ratio was 2.5:2, WSA was 6.2 ± 1.9° with filtration efficiency (0.3 μm) of 68.61%.
✓ 已验证
产品关联
DOI
高影响因子
IONICS
·
2021
·Vol. 27
·期 11
·4907-4916
·
IF 2.817
Wang Kunjie,Chen Jinliang,Li Hongxia,Zhang Mengmeng,Liao Quanxing,Wang Letong,Zhang Yuhua,Niu Xiaohui
We have synthesized nitrogen-doped carbon quantum dots (N-CQDs) via one-step hydrothermal method by using citric acid and urea as carbon sources, In order to solve the agglomeration effect of carbon quantum dots and increase its recognition sites, and then combined the N-CQDs with 3,4,9,10-perylenetetracarboxylic acid (PTCA) to synthesize an self-assembled carbon quantum dots-3,4,9,10-perylenetetracarboxylic acid (N-CQDs/PTCA) composite, which has strong fluorescent properties. The fluorescence spectrum showed that the prepared self-assembled composite (N-CQDs/PTCA) has strong yellow-green light emission near 510 nm. The characterizations such as ultraviolet–visible absorption, X-ray electron spectroscopy, Fourier infrared spectroscopy, and transmission electron microscopy have confirmed that the N-CQDs and PTCA were combined together successfully. And the prepared self-assembled N-CQDs/PTCA was independent of excitation. It has stable and strong fluorescence properties and can be used as a fluorescent probe. The study also found that in the presence of Fe 3+ ions, the fluorescence of self-assembled carbon quantum dots N-CQDs/PTCA will be quenched, and the quenching efficiency had a good linear relationship with the concentration of Fe 3+ ions. Therefore, we proposed to use the self-assembled carbon quantum dots N-CQDs/PTCA as a fluorescent probe to detect Fe 3+ selectively. The results showed that the method was fast, reliable, obvious detection signal, selective, and not affected by incubation time. The detection limit is 0.041 μM, which provides a new idea for the detection of Fe 3+ ions by using self-assembled method and has broad application prospects. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子