Science China-Chemistry
·
2023
·
IF 9.6
Yang Hui,Ji Haijun,Zhou Xinxin,Yang Shihan,Li Liwei,Sun Chaoying,Lei Weiwei,Wang Runguo,Zhang Liqun
Poly(diethyl fumarate- co -methoxyethyl acrylate- co -vinyl chloroacetate) (PDEFMV), a novel bio-based elastomer with a saturated structure, was synthesized via redox emulsion polymerization. The glass-transition temperatures of PDEFMV, adjusted through the variation of the diethyl fumarate-to-methoxyethyl acrylate feeding ratio, ranged from −36.1 to −14.8 °C. The number-average molecular weights of PDEFMV ranged from 384,000 to 46,000 g/mol. In designing the molecular structure, vinyl chloroacetate was used to provide active sites for subsequent vulcanization and crosslinking. The active chlorine groups within the PDEFMV chain reacted with the crosslinking agent trithiocyanuric acid under high temperature and pressure to form a nonsulfur crosslinked three-dimensional network structure. To achieve the desired properties, carbon black (CB, N330) was incorporated to reinforce PDEFMV, leading to the formation of PDEFMV/CB composites. A comprehensive study was conducted on the high-temperature oil resistance of PDEFMV/CB composites. Following immersion in IRM903 oil at temperatures of 150 and 200 °C for 72 h, the mass and volume changes in PDEFMV/CB were lower than those observed in commercially available acrylate rubber (AR)/CB, indicating that PDEFMV exhibited superior oil resistance. Furthermore, the aging characteristics and mechanisms of oil resistance in the PDEFMV/CB and AR/CB composites were investigated at different temperatures (150, 200, and 250 °C). The results provide insights into the operational temperature ranges suitable for PDEFMV/CB and offer valuable guidance for potential industrial applications.
✓ 已验证
产品关联
DOI
高影响因子
Science China-Earth Sciences
·
2026
·Vol. 69
·期 10
·3835-3849
·
IF 5.5
Liu Haoyang,Li Wei,Zhu Jihao,Lu Jianggu,Wu Tao
Mineral carbonation, which transforms CO 2 into stable carbonates via reaction with Ca- and Mg-silicates, offers a permanent and secure carbon sequestration pathway. Olivine is a highly reactive feedstock, and its carbonation kinetics are known to depend on particle size, CO 2 partial pressure ( \({P_{{\rm CO}_2}}\) ), temperature, and additives. However, two key gaps persist in the current understanding. First, the time-dependent influence of \({P_{{\rm CO}_2}}\) throughout the carbonation process remains unclear. Furthermore, the effect of the grinding method (wet vs. dry) is frequently oversimplified as reducing particle size, neglecting its concurrent alteration of other physicochemical properties. This study systematically addresses these gaps by investigating the carbonation of fine-grained olivine under varied \({P_{{\rm CO}_2}}\) (5–14 MPa) at 185 °C. Reaction progress was tracked in real time using a flush-sampling batch reactor. Our results reveal that the wet-ground olivine, possessing a higher specific surface area (SSA), achieved significantly greater carbonation efficiency compared to the dry-ground sample. Kinetic analysis based on the shrinking core model (SCM) indicates that the formed porous carbonate layer does not act as a diffusion barrier but facilitates the reaction. Increasing \({P_{{\rm CO}_2}}\) significantly enhanced the carbonation rate and final efficiency, with the maximum conversion reaching 98.45% at 14 MPa after 8 h. Furthermore, we identified that the reaction was most sensitive to \({P_{{\rm CO}_2}}\) during the initial stage, with the most pronounced effect observed within the first hour. The primary mechanistic insight is that initial carbonation is predominantly controlled by \({P_{{\rm CO}_2}}\) -driven dissolution, whereas at later stages, the available reactive surface area becomes the limiting factor. This work demonstrates that optimizing both the grinding method (preferring wet grinding for ex-situ applications) and employing elevated \({P_{{\rm CO}_2}}\) (⩾ 8 MPa for in-situ scenarios) are critical strategies for enhancing the efficiency and practical viability of olivine-based CO 2 sequestration.
✓ 已验证
产品关联
DOI
高影响因子
Science China-Chemistry
·
2026
·
IF 9.8
Qian Bo,Xu Lin,Zhao Zhechen,Wang Yihan,Wang Zijin,Wu Zekai,Sun Wei,You Zhengwei
Dynamic covalent crosslinked polymer networks offer attractive reprocessability, but their practical implementation is often limited by the requirement for continuous thermal activation during processing and solvent-assisted preparation. Here, we report a solvent-free scalable strategy for preparing dynamic crosslinked polyurethanes (CDAPUs) based on Diels-Alder chemistry by regulating the dispersion of powdery dynamic components in polyol media. The resulting materials exhibit strong adhesion to diverse substrates and maintain reliable bonding under harsh thermal conditions, achieving a maximum bonding strength of 17.17 MPa and nearly unchanged adhesion strength after ten bonding–debonding cycles. More importantly, we identify a dissociation–reconstruction window in the dynamic network and use it to enable post-activation processing and high-strength bonding, achieving an adhesion strength of 10.18 MPa, corresponding to over 90% retention relative to its high-temperature bonding. This work establishes a scalable and solvent-free manufacturing strategy for dynamic crosslinked polyurethane adhesives. It offers a practical route toward low-thermal-load assembly, repairable bonding, and sustainable adhesive technologies.
✓ 已验证
产品关联
DOI
高影响因子
Food Analytical Methods
·
2026
·Vol. 19
·期 11
·350
·
IF 3
Li Yunna,Li Xueliang,Chang Yuming,Qi Fan,An Lingxia,Jiang Kezhi
The content of free fatty acids (FAs) is a critical safety indicator for edible oils. However, the current GC–MS analysis of FAs is not satisfactory due to their inefficient derivatization under mild conditions. In this study, we achieved efficient methylation of fatty acids within 10 min by derivatization with trimethylsilyldiazomethane (TMSD) catalyzed trimethyl chlorosilane (TMSC). Then, an efficient methylation of FAs was achieved within 10 min through derivatization with trimethylsilyldiazomethane under the catalysis of trimethylchlorosilane, and a convenient method for the determination of 33 free fatty acids in oil samples has been developed by methylation in combination with extraction with methanol and GC–MS analysis. The method exhibited good reproducibility, sensitivity, and recovery. The determined content range of several free FAs (e.g. palmitoleic acid, α-linolenic acid, linoleic acid, elaidic acid, and arachidic acid) in edible oils was significantly lower than that in expired edible oils (or gutter oil). Furthermore, the content of γ-linolenic acid, which is prone to oxidation, was below the LOQ (0.40 ng/g) in gutter oil, suggesting it as an indicator of severe oxidative degradation. This method was characterized by its ease of operation and good reproducibility, presenting significant potential for oil quality control.
✓ 已验证
产品关联
DOI
高影响因子
BIOLOGICAL TRACE ELEMENT RESEARCH
·
2026
·
IF 4.3
Liu Bai Han,Zhang Jin Ge,Peng Dong Qiao,Jin Yong Cheng
Copper is an essential trace element for beef cattle, yet its muscle developmental regulatory mechanism remains unclear. This study investigated the effects of copper sulfate (CuSO₄) on myogenic differentiation of bovine skeletal muscle-derived cells (BSMC) and the underlying molecular mechanisms. BSMC were isolated from the longissimus thoracis muscle of three 30-month-old crossbred steers, with each steer defined as an independent experimental unit corresponding to a separate biological replicate ( n = 3). Based on cell viability, CuSO₄ was used at 0, 0.1, 1, and 10 µM. All cell samples were harvested at differentiation day 6 (D6). The 0.1 µM CuSO₄ treatment during cell growth significantly promoted D6 myotube formation ( P = 0.049), and upregulated mRNA and protein expression of myogenic differentiation 1 (MyoD) ( P = 0.044, P = 0.030), as well as protein expression of hypoxia-inducible factor-1α (HIF-1α) ( P = 0.037) and β-catenin ( P = 0.050). During differentiation, 1 µM CuSO₄ significantly facilitated D6 myotube formation ( P = 0.0004), increased myogenic factor 5(Myf5) mRNA and protein expression ( P = 0.030, P = 0.006), and elevated HIF-1α ( P = 0.025) and β-catenin ( P = 0.004) protein levels, whereas Wnt10b protein expression remained unaltered ( P = 0.930). Single or combined pharmacological inhibition of HIF-1α and β-catenin markedly reversed copper’s pro-myogenic effect on BSMC. In conclusion, copper modulates BSMC myogenic differentiation via the HIF-1α/β-catenin axis by enhancing β-catenin protein stability independent of Wnt10b transcription. HIF-1α acts upstream to drive β-catenin, and a reciprocal regulatory relationship may exist in which β-catenin in turn helps sustain HIF-1α abundance, thereby supporting cascade signaling and downstream myogenic transcription. This study elucidates copper’s molecular mechanism governing muscle development and provides theoretical support for precise copper supplementation to improve beef production performance.
✓ 已验证
产品关联
DOI
高影响因子
PSYCHOPHARMACOLOGY
·
2023
·
IF 3.4
Fei Yuxiang,Li Tao,Wu Ruoyu,Xu Xuejiao,Hu Sheng,Yang Ya,Jin Chenchen,Tang Wenlian,Zhang Xu,Du Qianming,Liu Chao
Background Ischemic stroke still ranks as the most fatal disease worldwide. Blood-brain barrier (BBB) is a promising therapeutic target for protection. Brain microvascular endothelial cell is a core component of BBB, the barrier function maintenance of which can ameliorate ischemic injury and improve neurological deficit. Se-methyl L-selenocysteine (SeMC) has been shown to exert cardiovascular protection. However, the protection of SeMC against ischemic stroke remains to be elucidated. This research was designed to explore the protection of SeMC from the perspective of BBB protection. Methods To simulate cerebral ischemic injury, C57BL/6J mice were subjected to middle cerebral artery occlusion/reperfusion (MCAO/R), and bEnd.3 was exposed to oxygen-glucose deprivation/reoxygenation (OGD/R). After the intervention of SeMC, the barrier function and the expression of tight junction and ferroptosis-associated proteins were determined. For mechanism exploration, LY294002 (Akt inhibitor) was introduced both in vivo and in vitro. Results SeMC lessened the brain infarct volume and attenuated the leakage of BBB in mice. In vitro, SeMC improved cell viability and maintained the barrier function of bEnd.3 cells. The protection of SeMC was accompanied with ferroptosis inhibition and tight junction protein upregulation. Mechanism studies revealed that the effect of SeMC was reversed by LY294002, indicating that the protection of SeMC against ischemic stroke was mediated by the Akt signal pathway. Conclusion These results suggested that SeMC exerted protection against ischemic stroke, which might be attributed to activating the Akt/GSK3β signaling pathway and increasing the nuclear translocation of Nrf2 and β-catenin, subsequently maintaining the integrity of BBB. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·
IF 5.8
Yang Yangyang,Li Shihao,Zhu Zhenting,Wan Lei,Wang Xun,Hou Jun,Liu Songqi,Fan Xiulei
The release of antibiotics has attracted wide attention due to their abuse and discharge. How to remove these emerging contaminants is an urgent need to be solved. In the present study, sludge-based biochar combining chitosan and iron oxide was prepared via municipal sewage sludge. The novel biochar modified with chitosan and iron oxide exhibited satisfying performance in eliminating antibiotics from water. The application of modified biochar combined with activated persulfate (PS) showed a remarkable removal efficiency of 96.98% for tetracycline (TC). Analysis of the surface characteristics of the modified biochar showed the presence of structural defects, dispersed iron oxides, abundant functional groups, a porous structure, and a relatively stable crystal structure. These characteristics attributed significant importance to facilitating the degradation of TC. A series of experimental conditions including preparation temperature (600–900 ℃), reaction temperature (15–45 ℃), contaminant concentration (30–180 mg/L), adsorbent usage (0.1–1 g/L), pH (2–10), and persulfate addition concentration (1–5 mmol) were conducted. The results revealed that the highest removal efficiency was achieved at 96.98% under the conditions of TC concentration at 30 mg/L, reaction temperature at 35 ℃, pH of 4, adsorbent addition amount of 0.6 g/L, and PS concentration of 2 mmol, respectively. Three degradation pathways and seven intermediate products of TC were proposed. Therefore, our study provides a promising approach for developing effective removal of antibiotic pollutants.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOM
·
2023
·
IF 2.6
Da Yaling,Liu Jianxing,Xue Xiangxin
An ultraviolet (UV)-curing polymer coating is an environmentally friendly coating with no volatile organic compound emissions, which can be used for surface protection of steel. However, pure organic polymer coatings cannot meet the needs of practical applications because of their low hardness, poor thermal stability, and high shrinkage rate. In this paper, different contents of mica particles were mixed into epoxy acrylates to prepare UV-curing organic–inorganic composite coatings. The inorganic material was used to enhance the thermal stability and corrosion resistance performance to solve part of the problems faced by a pure organic polymer coating. This paper discusses the UV-curing process of the composite coating, the distribution of particles in the matrix resin, the mechanical properties of the coating, and its thermal stability and corrosion resistance. The results show that the prepared composite coatings show significant improvements in thermal stability and corrosion resistance. Compared with the epoxy acrylate coating, the T 10 of the mica-added composite coating with mica was increased by more than 100°C. At 15 g addition (373,070 Ω cm 2 ), there was a 35 times improvement in the total impedance after immersion in 3.5 wt.% NaCl solution for 24 h compared to that of the epoxy acrylate coating (10,799 Ω cm 2 ).
✓ 已验证
产品关联
DOI
高影响因子
Scientific Reports
·
2023
·Vol. 13
·期 1
·1-18
·
IF 4.6
Zhang Meng,Liu Yunqing,Yin Zhizhen,Feng Dan,Lv Hui
The magnetic chitosan/sludge biochar composite adsorbent was prepared using chitosan, Fe 3 O 4 , and sludge biochar as raw materials. The composite adsorbent was able to achieve rapid solid–liquid separation under an applied magnetic field. The morphology and microstructure of the composite adsorbent were characterized by FTIR, XRD, SEM, VSM, and BET analysis. The adsorption performance of the composite adsorbent on Cu 2+ was investigated through static adsorption experiments, and the effects of adsorbent dosage, initial concentration of Cu 2+ , initial pH of the solution, and adsorption temperature on the adsorption efficiency of Cu 2+ were discussed. The results showed that chitosan and Fe 3 O 4 were successfully loaded on sludge biochar. When the initial concentration of Cu 2+ was 30 mg/L, the dosage of the magnetic chitosan/sludge biochar composite material was 0.05 g, the adsorption time was 180 min, pH was 5, and the temperature was room temperature, the maximum removal rate of Cu 2+ reached 99.77%, and the maximum adsorption capacity was 55.16 mg/g. The adsorption kinetics and adsorption isotherm data fitted well with the pseudo-second-order kinetic model and Langmuir adsorption isotherm model, indicating that the adsorption process was chemisorption with monolayer coverage.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·
IF 5.8
Shen Qiang,Wu Tao,Zhang Guo-Bang,Ma Hao-En,Wang Wei,Pan Guo-Xiang,Zhang Yi-Fan
Heavy metal ions that exist in groundwater and farmland jeopardize the ecological environment and are very difficult to remove because of the complicated actual environment. Raw bentonite–gelatin beads (RB-GT) and magnetic bentonite–gelatin beads (MB-GT) synthesized in this work would be an appropriate tool to solve this problem. Those beads are synthesized by a facile hybrid injection method. Their adsorption behaviors on Cu(II) ions were systematically investigated using the batch adsorption method. The beads were characterized by scan electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectra (FTIR), and X-ray photoelectron spectroscopy (XPS). The adsorption isotherm and adsorption kinetic study showed that the Cu 2+ adsorption by MB-GT beads fitted the Langmuir model and the pseudo-second model. The adsorption maximum capacities reached 192.5 mg/g and 236.5 mg/g with Cu concentration of 1000 mg/L for RB-GT and MB-GT beads, respectively. The competitive adsorption with other heavy metal ions (Ni(II), Pd(II) and Cd(II)) were compared. The adsorption of Cu(II) mechanisms is also further discussed. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2026
·
IF 3.3
Wang Xinyuan,Liu Yue,Peng Decheng,Wu Shaogui
The extensive use of antibiotics has promoted their migration into groundwater and, ultimately, the food chain, posing risks to human health and aquatic environments. Addressing this problem requires not only quantitative detection but also efficient removal of antibiotics from contaminated water. Here, Pyracantha fortuneana fruit and 5-amino-o-cresol (5-AoC) were used as precursors to prepare green fluorescent carbon dots (G-CDs) by a solvothermal method, with a fluorescence quantum yield of 17.3%. The G-CDs exhibited stable fluorescence under a range of environmental conditions. A CDs/TiO 2 composite photocatalyst was then constructed by coupling the G-CDs with TiO 2 . Under optimized conditions (20 mg catalyst, pH 9, 1.0 mmol/L PMS and ultraviolet irradiation), the catalyst removed 95.8% of tetracycline (TC) within 30 min. This strategy provides a simple and rapid route for TC removal from water under controlled laboratory conditions. Fluorescent carbon dots derived from P. fortuneana fruit therefore show promise for model-pollutant treatment. Because this study focused on material synthesis and performance validation, degradation performance in real water matrices and long-term operational stability should be examined in future work.
✓ 已验证
DOI
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2026
·
IF 15
Lv Nanning,Dong He,Sun Haifu,Shi Jing,Wu Xinhui,Chen Xiaofan,Li Hongye,Feng Xiaoxiao,Guo Xuran,Dong Xieping,Hu Ying,Zheng Longpo,Liu Mingming
Diabetic bone defects are difficult to repair because chronic hyperglycemia disrupts local immunometabolic and vascular homeostasis, leading to persistent inflammation, poor angiogenesis, and impaired osteogenesis. Here we report a piezoelectrically driven hierarchical biomimetic architecture that promotes diabetic bone defect repair through spatially bidirectional regulation of HIF-1α. The system comprises an ultrasound-responsive PLLA/ZnO/DFO biomimetic periosteum and a conductive GelMA/MXene/Ce-MOF@Arg defect-filling hydrogel. Under ultrasound stimulation, the upper layer generates piezoelectric microcurrents and releases deferoxamine, which is associated with activation of endothelial HIF-1α/VEGF signaling and angiogenic responses, whereas the lower layer relays electrical cues into the defect core and is associated with reduced macrophage HIF-1α expression and glycolytic activity in parallel with arginine delivery and Ce-MOF nanozyme-mediated redox regulation. This design promotes recovery toward a more favorable immunometabolic-vascular state by coupling superficial pro-angiogenic activation with deep anti-inflammatory metabolic remodeling. The scaffold shows favorable piezoelectric, conductive, mechanical, degradation, and release properties, promotes endothelial migration, drives macrophage polarization toward a reparative phenotype, enhances osteogenic-angiogenic coupling, and substantially accelerates critical-sized calvarial defect healing in diabetic rats. Our findings provide an electroactive and spatially coordinated strategy for diabetic bone regeneration.
✓ 已验证
产品关联
DOI
高影响因子