Advances in Traditional Medicine
·
2026
·
IF 1.4
Wu Huan,Zhou Li,Lin Wei,Zhang Hong-xing,Zhang Zhao-qing,Wang Xiao-fei,Ju Shi-ru,Liu Zhi-gang,Hu Fei
This study aimed to explore the association between the effect of electroacupuncture (EA) in improving hyperlipidemia and changes in the intestinal flora and bile acid metabolism, and to preliminarily investigate its possible molecular basis. Wistar rats were stratified into five groups: control, model, sham EA, EA, and EA+FXR agonist. Comprehensive assessments included hepatic histopathology (H&E staining), serum lipid profiling (TC, TG, LDL-C, HDL-C), 16S rDNA sequencing of gut microbiota, targeted bile acid metabolomics, and molecular analyses (Western blot, immunohistochemistry and qRT-PCR) of FXR/FGF15 pathway components and associated enzymes (CYP7B1, CYP27A1). EA intervention significantly attenuated hyperlipidemia manifestations by reducing body weight, improving hepatic steatosis, and normalizing serum lipid parameters. Gut microbiota analysis revealed EA-enhanced microbial diversity with specific modulations: decreased Firmicutes / Bacteroidota ratio, enriched Akkermansia and Bacteroidota , and reduced Muribaculum abundance. Targeted metabolomics identified EA-mediated restoration of bile acid metabolism, particularly elevation of secondary bile acids. Molecular analyses demonstrated EA activation of the FXR/FGF15 axis with downstream regulation of hepatic CYP7B1 and CYP27A1. The effect of EA in improving hyperlipidemia is significantly associated with the changes in the structure of the intestinal microbiota and the activation of the FXR/FGF15 signaling pathway. This finding suggests that the metabolic benefits of EA may involve the molecular connection of the gut microbiota-bile acid axis.
✓ 已验证
DOI
高影响因子
Food Analytical Methods
·
2026
·Vol. 19
·期 10
·325
·
IF 3
Yang Yuxin,Shu Mei,Liao Ningbo,Zhong Chan,Wu Guoping
The colloidal properties of Salmonella promote its adhesion to the oil–water interface in fatty food emulsions, hindering separation from the aqueous phase and reducing the sensitivity of rapid detection assays. There have been studies that utilized α-amylase to hydrolyze starch to enhance the detection of Salmonella in ground beef. However, the interfacial behavior of enzyme-modified starch and its relationship with bacterial distribution in oil–water systems is unclear. Based on this background, an enzyme-modified soluble starch (E-SS) was prepared that can effectively recover Salmonella from meat samples. Furthermore, this study examined the molecular structure of E-SS and its regulatory effect on Salmonella distribution in oil–water systems. Compared with native soluble starch (SS), E-SS exhibited a smaller molecular weight distribution (Mw = 3.184 × 10 3 ± 5.776%) and stronger interfacial activity ( K diff = 1.14 ± 0.02). Confocal laser scanning microscopy (CLSM) revealed fluorescence co-localization between E-SS and the oil phase, indicating that E-SS was uniformly adsorbed in the oil–water interface. The better interfacial properties of E-SS allowed it to competitively displace Salmonella adsorbed on the oil–water interface and facilitate the enrichment of the bacteria in the aqueous phase. Finally, the early detection methods were optimized and iterated: E-SS was combined with Bentonite-coated activated carbon (BCAC) and real-time fluorescence loop-mediated isothermal amplification (Rti-LAMP) to detect Salmonella in beef samples. It was found that the addition of E-SS improved the detection sensitivity of BCAC-Rti-LAMP for Salmonella by 10 to 100-fold within 3 h.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Deng Chuyan,Zhou Yujun,Cai Xin,Zhang Xuan,Wang Yunlong,Qi Junwen,Zhu Zhigao,Yang Yue,Li Jiansheng
Electrocatalytic dehalogenation can effectively detoxify chlorinated organic pollutants (COPs) by cleaving C–Cl bonds in wastewater treatment, however, it often fails to achieve complete mineralization. In particular, the fate of the released Cl - has often been overlooked and whether they can be recycled and reutilized to facilitate pollutant degradation has remained unclear. Herein, a reduction–oxidation cascade system is constructed, in which Cl - liberated during electrocatalytic reduction is directly converted into reactive chlorine species (RCS) during the subsequent oxidation step, enabling complete mineralization of organic pollutants. Quenching experiments and electron paramagnetic resonance spectroscopy (EPR) confirm the in situ reutilization of detached Cl - . Laser scanning confocal microscopy (LSCM) visualizes the adsorption and transformation of Cl - on the electrode surface, while ab initio molecular dynamics (AIMD) calculations reveal the interfacial concentration distribution of Cl - and the energy profiles of its migration. This work establishes a cascade electrocatalytic strategy that couples reduction and oxidation, enabling chlorine reutilization and providing a sustainable pathway for the removal and resource recovery of COPs.
✓ 已验证
DOI
高影响因子
Nature Protocols
·
2026
·
IF 18.4
Wang Lu,Liu Jinyao
The engineering of living cells represents a promising biomedical frontier that enables the design of cells with tailored functionalities for advanced therapeutic applications. Genetic manipulation serves as a primary approach in cell engineering, yet it faces inherent limitations, including the complexity of multigene editing and poor cross-species applicability, which restrict the development of cells with sophisticated functionalities. Therefore, flexible and versatile engineering strategies capable of functionalizing living cells to address diverse therapeutic requirements are highly desirable. Given its pivotal role in mediating cellular interactions, the cell surface is an attractive target for directing cell engineering. The diverse functional groups present in surface biomolecules offer abundant chemical modification sites, making them highly amenable to functionalization. Leveraging this inherent chemical accessibility, we have recently developed a flexible and versatile platform for surface functionalization of living cells through in situ dopamine polymerization that allows us to design personalized living cells with customizable functions by tuning the surface components. Here we provide a detailed protocol describing two distinct methods for bacterial functionalization. The first method uses dopamine polymerization-mediated mono-functionalization to construct mucus-penetrating bacteria that can reinforce intestinal mucosal barrier to prevent colitis. The second method uses dopamine polymerization-mediated dual-functionalization to generate synergy-immunoactivation bacteria that can simultaneously induce anticancer and antiviral immunity to treat cancer and prevent infection. Excluding bacterial culture, preparation of mucus-penetrating bacteria and synergy-immunoactivation bacteria takes ~3 h and 1 h, respectively. We anticipate that this protocol can offer valuable guidance for the engineering of living cells with designable and tailorable functionalities for innovative cell-based therapy.
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2026
·Vol. 193
·期 10
·650
·
IF 5.4
Kang Yujiao,Guo Hao,Yang Zeyun,Deng Meng,Xin Yu,Ren Jia,Wang Mingyue,Yang Wu
As a third-generation fluoroquinolone antibiotic, levofloxacin (LEV) residue in biological and environmental samples has aroused widespread public concern. In this work, NH 2 -UiO-66 was in-situ synthesized via a solvothermal route on MoO 3 surface. Subsequent covalent modification with ferrocene (Fc) afforded a ratiometric electrochemical sensor denoted as Fc-NH 2 -UiO-66/MoO 3 /GCE for LEV quantification. The anchored Fc units not only construct an internal self-calibration system with stable reference signal to greatly improve detection reliability, but also boost the electrical conductivity of the composite electrode. The as-fabricated sensor exhibits favorable analytical performance toward LEV, featuring a wide linear range of 0.6 µM-600 µM and a low limit of detection of 0.032 µM, together with stable anti-interference capability. Moreover, the developed electrode was successfully employed to determine LEV in practical specimens including serum, urine and commercial LEV eye drops. This reliable and sensitive analytical strategy exhibits promising prospects for clinical diagnosis and pharmaceutical analysis. Graphical abstract
✓ 已验证
DOI
高影响因子
CELLULOSE
·
2026
·
IF 4.6
Zhang Xinyan,Zhou Jingqiu,Han Xue,Xing Xu,Yang Kun,Wu Tao,Li Hao,Hao Xujia,Du Qiang,Liu Xinwei,Gong Tianxing,Leng Hongrui,Wei Shibo
Carboxymethyl cellulose (CMC) exhibits excellent biocompatibility and water retention, yet its high hydrophilicity often leads to excessive swelling and poor mechanical stability in physiological environments, limiting its utility in topical skin therapies. In this study, we developed a robust, chemically crosslinked CMC-based hydrogel loaded with curcumin (Cur@CL) using natural lysine as a non-toxic crosslinker. This green crosslinking strategy significantly reinforced the hydrogel network, achieving a swelling ratio of 3074 ± 226% and a compressive stress of 20.06 ± 1.0 kPa. The Cur@CL hydrogel demonstrated a sustained curcumin release profile of 83.98 ± 5.68% over 144 h, ensuring prolonged local bioavailability. In vitro, Cur@CL exhibited excellent cytocompatibility with L929 fibroblasts, accelerated fibroblast-associated wound closure, and reduced intracellular reactive oxygen species (ROS) levels by 62.97%. Furthermore, in a 2,4-dinitrochlorobenzene (DNCB)-induced atopic dermatitis (AD) mouse model, topical application of Cur@CL significantly alleviated clinical symptoms, reducing epidermal thickening by 71.5% compared with the DNCB-challenged model group, with no detectable systemic toxicity. This study presents a simple, tunable, and eco-friendly cellulose-based hydrogel platform for the effective, non-steroidal management of AD.
✓ 已验证
DOI
高影响因子
Arthropod-Plant Interactions
·
2026
·Vol. 20
·期 5
·71
·
IF 1.7
Mao Jie-Wen,Luo Qian-Wen,Duan Shao-Ting,Zhang Meng-Hao,Liu Xiao-Guang,Guo Xian-Ru,Liu Yan-Min,Li Wei-Zheng
The specialist Helicoverpa assulta and the generalist Helicoverpa armigera are closely related species in Noctuidae. To elucidate the chemical basis underlying their differential oviposition responses to tomato, we compared the oviposition and walking responses of adult females and larvae of both species to tomato volatiles as well as derived synthetic blends. Dichloromethane and hexane extracts of tomato leaves deterred oviposition by H. assulta females. In contrast, all three extracts significantly attracted oviposition by H. armigera females. The components of the dichloromethane extract of tomato leaves were classified according to biosynthetic pathways (acetylmalonate, acetyl‑mevalonate, and shikimate pathways), and four blends were prepared based on their relative percentages in the extract: Blend 1 (green leaf volatiles), Blend 2 (aromatic compounds), Blend 3 (terpenoids), and Blend 4 (the full blend, contained all components that contained in the Blends 1 ~ 3). All blends significantly deterred oviposition by H. assulta females, with Blend 4 being the most effective. Only Blends 2 and 3 significantly attracted oviposition by H. armigera females. Larval walking bioassays on a locomotion compensator indicat that the differential host use is attributable to adult oviposition preference, rather than to larval olfactory discrimination between host and non-host volatiles. In field trials, the full blend effectively reduced egg deposition by H. assulta rather than H. armigera on tobacco plants. All together, the oviposition deterrence of H. assulta by tomato appears to be regulated by a “partial blend” of compounds commonly found across the plant kingdom, not by tomato-specific unique components.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Ni Xiao-Qi,Xu Xiang-Yang,Zhu Yao-Feng,Wang Hui-Ya
The rapid advancement of communication technologies and wearable applications has increased the demand for high-performance flexible electromagnetic wave absorption materials. Conventional conductive fibers are often constrained by their poor wearability, weak interfacial stability, and limited absorption efficiency, which restrict their reliability and practical applicability in dynamic environments. Herein, a flexible and robust electromagnetic-absorbing fiber was successfully fabricated via wet spinning techniques, which integrates multi-walled carbon nanotubes (MWCNTs), polyaniline (PANI), and aramid nanofibers (ANFs). Polymerization of PANI on the MWCNTs surface is employed to optimize impedance matching and enhance interfacial compatibility, while ANFs serve as a continuous structural skeleton, improving the mechanical strength and spinnability. The resulting composite fibers exhibited a tensile strength of (202.0±8.0) MPa and an elongation at break of 13.6%±0.9%, stable electrical conductivity under mechanical deformation, and ultrasonic cleaning. Notably, the fiber architecture enables superior electromagnetic wave absorption, achieving a minimum reflection loss of −62.07 dB and an effective bandwidth of 3.24 GHz compared to the powder counterparts, owing to the extended propagation path and multiple scattering within the aligned fiber network. In addition, the composite fibers demonstrated self-extinguishing behavior during combustion, reflecting their inherent flame-retardant characteristics. This study provides a feasible strategy for developing flexible, high-performance electromagnetic wave (EMW)-absorbing fibers for next-generation protective textile materials.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·Vol. 61
·期 38
·29087-29101
·
IF 4.4
Wu Zhengyang,Zhang Jiarui,Wang Meiqi,Yang Rui,Zhang Wenqi,Fan Sidi,Yao Cheng,Yu Xiang
Poly(m-phenylene isophthalamide) (PMIA)-based insulating paper exhibits excellent electrical insulation and mechanica l properties, including higher breakdown strength ( E b ) than conventional cellulose insulating paper. However, its intrinsically low thermal conductivity limits heat dissipation in oil-paper insulation systems, causing Joule heat accumulation, insulation degradation, and thermal breakdown. Herein, we report PMIA-based composite papers prepared by binary multidimensional doping the small-size 0D sphere-like aluminum nitride (AlN) filler with large-size 3D sphere-like, 2D lamellar-like, and 1D wire-like AlN fillers, respectively. At the same total filler volume fraction, large-size fillers with different morphologies show distinct advantages. For electrical insulation, the 2D lamellar-like filler most effectively enhances E b by optimizing trap characteristics and mitigating electric field distortion, reaching 284.3 kV/mm, 29.5% higher than that of the 0D-only doped sample (N15). For thermal conduction, 3D sphere-like filler is most effective in enhancing the out-of-plane thermal conductivity ( k ⊥ ) by reducing thermal resistance, reaching 0.282 W/(m·K) and representing a 14.5% improvement over N15. In contrast, 1D wire-like and 2D lamellar-like fillers are more favorable for constructing in-plane heat transfer pathways, yielding in-plane thermal conductivity ( k // ) values of 0.546 W/(m·K) and 0.386 W/(m·K), respectively. Moreover, finite element analysis further reveals the morphology-dependent electric and thermal field distributions in the composites.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 24
·1923
·
IF 3.2
Ma Teng,Zhang Zhikun,Zhang Junjie,Li Shuaijie,Liu Renfei,Luo Fangchun,Zhang Lili,Xu Zhen,Guo Fuqiang,Zhang Baohua
To suppress capacity degradation of Ni-rich LiNi 0.83 Co 0.11 Mn 0.06 O 2 (NCM) cathodes with radially oriented primary grains, a strategy for homogeneous Sr 2+ doping was developed by controlling the Sr 2+ diffusion path from the surface into the bulk. Introducing SrO during sintering enabled Sr 2+ to penetrate along the radially aligned primary grains, achieving uniform distribution throughout the material. The NCM-Sr cathode with 0.7% Sr 2+ exhibited superior rate performance, delivering specific capacities of 182.5, 172.3, and 165.7 mAh g −1 at 1C, 5C, and 10C, respectively, compared with 167.3, 148.1, and 143.2 mAh g −1 for the undoped sample. Uniform Sr 2+ incorporation, facilitated by radial grain alignment, effectively mitigates localized strain accumulation during cycling, enhancing structural stability. For the first time, NCM cathodes were analyzed using deep learning in conjunction with detailed morphological information; the analysis confirmed that controlled particle orientation and uniform small primary particles significantly improve electrochemical performance. These Sr-doped cathodes demonstrate extended cycle life, stable voltage profiles, and excellent high-rate capabilities, highlighting an effective strategy for advancing Ni-rich ternary cathode materials in high-energy lithium-ion batteries.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Wang Mingqiang,Yu Hui,Wang Benshan,Xu Zebo,Cai Zhenguang,Huang Chaoran,Zhao Ni
Recent advances in in-sensor computing demonstrate the potential of integrating sensing and computation at the perception front end; however, many existing approaches rely on customized devices, facing scalability, uniformity, and power challenges. Here, we present a cross-platform in-sensor computing strategy that embeds multiply–accumulate operations directly into the physical sensing process. We identify a mathematical isomorphism between carry propagation in computation and sensor’s exponential decay response, establishing a general LinExp-τ principle that enables diverse sensing devices to function as efficient computational units. The approach is experimentally validated across different devices, including semiconductor photodetectors, oxide transistors, and conductive polymer-based neural probes. A high-speed photodetector implementation achieves gigascale operation rates with high area efficiency and zero static power consumption during core operations. Beyond device-level performance, the architecture enables real-time visual preprocessing and in-sensor physiological signal solving, including event-driven functional near-infrared spectroscopy. These results provide a scalable, energy-efficient framework for sensing-as-computing systems.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PAPERS
·
2026
·
IF 2.7
Wu Shukai,Hou Shuai,Meng Bo,Li Haichao
Developing carbon-based adsorbents that simultaneously deliver high CO 2 adsorption capacity and high selectivity is crucial for energy-efficient carbon capture technologies. To overcome the limitations of conventional activators, we employed potassium chloride (KCl) as a single green salt template and successfully converted sodium lignosulfonate into microporous carbon materials (MCMs) by tailoring the ultramicroporous structure through a molten-salt method. The sample prepared at a KCl-to-sodium lignosulfonate mass ratio of 3:1 exhibited a micropore specific surface area of 1452 m 2 /g, with ultramicropores concentrated in the range of 0.3–0.6 nm. At 0 ℃ and 25 ℃ under 1 bar, the maximum CO 2 adsorption capacities reached 5.04 mmol/g and 3.36 mmol/g, respectively. The CO 2 /N 2 selectivity, estimated by ideal adsorbed solution theory (IAST) under simulated flue gas conditions (15% CO 2 /85% N 2 ) at 25 ℃ and 1 bar, reached 20.2. This outstanding combination of high capacity and high selectivity originates from the substantial micropore volume and the enhanced CO 2 pore wall interactions within the narrow ultramicropores, as evidenced by the low-coverage isosteric heat of adsorption of approximately 29 kJ/mol. This study demonstrates that even with a single potassium chloride salt template, precise control over ultramicropore size distribution can be achieved, enabling both high adsorption capacity and high selectivity, and thus provides a promising candidate for post-combustion CO 2 capture and a sustainable route for the valorization of lignin industrial by-products.
✓ 已验证
产品关联
DOI
高影响因子