JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Yiqing Wu,Lina Qin,Yimeng Zhang,Yifan Jia,Yaoyang Lü,Nianlong Wang,Hao Zheng,Liang Li,Zijing Zhang
Microplastics, as emerging persistent environmental contaminants, can act as vectors for the absorption of other pollutants in ecosystems, such as pesticide residues. However, the combined toxicological effects of microplastics and pesticides on pollinators remain poorly understood. Here, we evaluated the toxicity of polystyrene microplastics (PS) and glyphosate (GLY), both individually and in combination, in honeybees ( Apis mellifera ). While no significant changes in body weight gain or food consumption were observed after 20 days of exposure, co-exposure to PS and GLY significantly increased bee mortality and induced midgut damage and microbial dysbiosis. In the gut, pathways associated with cell proliferation and differentiation, along with genes related to oxidative stress, detoxification, and immunity, were significantly downregulated. Furthermore, the combination of PS and GLY impaired sucrose responsiveness, a key cognitive behavior in bees. Brain transcriptomics indicated a downregulation of serotonergic synapse-related genes, which were correlated with shifts in core gut bacteria such as Snodgrassella and Lactobacillus . Our findings demonstrate that co-exposure to PS and GLY exacerbates gut homeostasis disruption and impairs cognitive behavior, suggesting a potential role of the gut–brain axis. This study extends our understanding of the combined ecological risks posed by multiple environmental contaminants to bees as insect pollinators and emphasizes the need for comprehensive hazard assessments in insect conservation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 4.4
Cheng Li-Qian,Gong Yi,Chen Kai,Hao Xuxia,Jiang Min,Dai Yu,Xie Xinyuan
LiMn 0.8 Fe 0.2 PO 4 (LMFP) cathode has emerged as a promising candidate for high-energy–density lithium-ion batteries due to its cost-effectiveness, high voltage plateau and intrinsic safety. However, drawbacks such as low electrical conductivity, Jahn–Teller effect and Mn 2+ dissolution severely limit its application potential. Herein, we propose a strategy that couples B-F co-doping with HAP@PP separator modification to simultaneously boost the conductivity of LMFP and mitigate Mn 2+ leaching using a facile solid-phase method. The optimized LiMn 0.8 Fe 0.2 P 0.99 B 0.01 O 3.97 F 0.03 (LMFP-BF1) exhibits superior rate capability and excellent cycle stability, which delivers a discharge capacity of 137.4 mAh g −1 and retains 92.6% of that capacity at 1C after 300 cycles. Moreover, HAP@PP separator exhibits an excellent manganese capture effect, which reduces the precipitation of manganese content from 134.647 to 14.056 mg kg −1 . The LMFP-BF1|HAP@PP cell remains a discharge capacity of 140.6 mAh g −1 at 0.5–45 ℃ after 100 cycles, with a capacity retention rate of 88.31%. This study offers insights into integrating ion doping and separator modification for phosphate-based high-energy–density lithium-ion batteries. Graphical abstract B-F co-doping and modified HAP@PP separator can simultaneously boost the conductivity of LMFP and mitigate Mn 2+ leaching, delivering superior cycling stability.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Zhu Xian,Zhihao Lu,Zihan Zhang,Yaning Liu,Yuchen Wang,Chaoyang Li,Chengshuai Jiang,Yingying Cai,Gongqiang Li,Xiao Huang,Gang Lu
The catalyst of FeCoS 2 particles were coated with a thin layer of poly(methyl methacrylate) (PMMA) for catalysis enhancement. • An exceptional CO production rate of 72.21 ± 3.37 mmol·g −1 ·h −1 was achieved, roughly 3.5 folds of pristine FeCoS 2 . • This catalysis enhancement is attributed to multiple factors, including enhanced light absorption, promoted interfacial charge transfer, optimized mass transportation, and improved reaction kinetics. Photocatalytic conversion of carbon dioxide (CO 2 ) to fuel, including carbon monoxide (CO), using solar energy offers a sustainable path to addressing energy and environmental crises. However, the efficiency of this conversion is far below the requirement for practical applications. In this work, an exceptional record-high CO production rate of 72.21 ± 3.37 mmol·g −1 ·h −1 was achieved by coating the nanocatalyst of FeCoS 2 particles with a thin layer of poly(methyl methacrylate) (PMMA). This CO production rate is roughly 3.5 folds of the photocatalytic activity of pristine FeCoS 2 . This PMMA coating-induced enhancement can be attributed to the synergistic effects of multiple factors, including enhanced light absorption, promoted interfacial charge transfer, optimized mass transportation, and improved reaction kinetics. Overall, this study establishes a simple, straightforward and versatile strategy for designing and preparing highly efficient photocatalysts, with potential applicability across diverse photocatalytic reactions. Download: Download high-res image (123KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
BIORESOURCE TECHNOLOGY
·
2026
·
IF 8.2
Zhiqin Li,Yuxin Kang,Tengran luo,Zegang Qiu,Zhuoyuan Li,Yanan Zhu
Ce reduced the charge density around Co and enriched defects on surface of catalyst. • Ce incorporation facilitates vanillin adsorption and H 2 activation at molecular level. • 9Co-1Ce/NC achieves 100 % vanillin conversion and 100 % selectivity of target product. • Co-Ce synergy promotes rate-determining C-O bond cleavage of two-step reaction pathway. The efficient conversion of lignin-derived oxygenates into fuels and high-value chemicals is pivotal for the development of renewable energy systems. A central challenge lies in the selective cleavage of the inherently recalcitrant C–O bonds in bio-oil model compounds under mild conditions. In this study, a multi-interface Co-Ce catalyst supported on nitrogen-doped carbon was successfully constructed via a bimetallic synergy and metal–organic framework (MOF)-derived strategy. The introduction of Ce exerted a multifunctional synergistic effect beyond that of a conventional promoter, realizing multi-scale modulation of the catalyst structure and performance. It modulated the electronic structure of Co active sites, thereby optimizing reactant adsorption and H 2 activation. Also, it suppressed the agglomeration of Co nanoparticles, thereby enhancing metal dispersion. Concurrently, it significantly increased the concentration of oxygen vacancies on the support surface, which collaboratively provided abundant active sites. Furthermore, it guided the formation of a hierarchical pore architecture conducive to mass transfer. Through this precise design and regulation of the active site microenvironment, the optimal catalyst achieved 100 % conversion of the model compound vanillin with 100 % selectivity toward 2-methoxy-4-methylphenol (MMP) under mild conditions, while also exhibiting excellent cycling stability and broad substrate applicability. This work not only demonstrates catalytic performance rivaling that of noble metals through the efficient synergy between non-noble metals (Ce and Co) but, more importantly, elucidates the underlying mechanism for the selective cleavage of C–O bonds. Download: Download high-res image (117KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子
Ceramics-Switzerland
·
2026
·Vol. 9
·期 6
·62
·
IF 2.8
Wenhao He,Shaohua Su,Bijun Fang,Shuai Zhang,Xiaolong Lu,Jianning Ding
Lead-free [(Ba0.85Ca0.15)1−1.5xNdx][(Zr0.1Ti0.9)0.995Mn0.005]O3(x mol% Nd/Mn BCZT, x = 0.05, 0.1, 0.5, 1 mol%) ceramics were prepared by the traditional solid-state reaction method, in which the synergistic effects of sintering temperature and Nd/Mn co-doping on the phase structure, microstructural evolution, and electrical properties were systematically investigated. All ceramics exhibit a pure perovskite structure, with the tetragonal (P4mm) phase dominating at room temperature as confirmed by the X-ray diffraction Rietveld refinement. The sintering temperature (1475–1520 °C) is found to be the primary factor governing densification and grain growth, with the relative density peaking at 91.7% for the x = 0.5 mol% sample sintered at 1505 °C. Within this optimized processing window, increasing the Nd content induces a gradual migration of the Curie temperature (TC) toward lower temperatures, accompanied by enhanced relaxor behavior. A highlight of this work is the strategic balance between piezoelectric activity and mechanical quality factor through a “donor–acceptor” co-doping mechanism. Specifically, for the x = 0.5 mol% ceramics, an exceptionally high mechanical quality factor (Qm= 424.5) is achieved for samples sintered at 1490 °C, which is proposed to be associated with the temperature-modulated formation of
✓ 已验证
DOI
高影响因子
Nanomaterials
·
2026
·Vol. 16
·期 13
·805
·
IF 4.8
Guangru Chu,Kaiyi Zhang,Yaru Wu,Siqi He,Zhongkai Liu,Aijiao Wang,Hongji Wang,Liying Cui,Shengkai Liu,Jin Huang,Jinsong Peng,Zhiguo Liu
Hollow mesoporous silica nanoparticles (HSNs) were synthesized via the Stöber method using resorcinol–formaldehyde resin as a template and further developed as a multifunctional nanocarrier for synergistic chemo–photothermal therapy. Docetaxel (DTX) and indocyanine green (ICG) were co-loaded into HSNs as the prodrug and photothermal agent. The loading sequence of these agents can critically affect encapsulation efficiency. Preloading DTX followed by ICG incorporation achieved the highest drug loading (38.65%) and preserved the photoactivity of ICG. The resulting ICG&DTX@NH2-HSNs exhibited strong and stable near-infrared photothermal conversion, as well as pH- and laser-responsive drug release behavior. In vitro studies confirmed efficient cellular uptake by 4T1 tumor cells and enhanced cytotoxicity compared with single treatments. In vivo experiments demonstrated significant tumor growth suppression in 4T1 tumor-bearing mice, with the greatest effect observed under combined ICG&DTX@NH2-HSNs and laser irradiation. Importantly, histological analysis of major organs revealed no obvious toxicity, confirming the biosafety of the present nanoplatform. This study confirmed the potential of hollow mesoporous silica-based nanocarriers as safe and effective platforms for combined chemotherapy and photothermal cancer therapy.
✓ 已验证
DOI
PubMed
高影响因子
INORGANIC CHEMISTRY COMMUNICATIONS
·
2026
·
IF 5.9
Hao Ai,Qiushuo Li,Lei Xu,Huaqiao Lu,Yaofa Gao,Qiong Wu
Peripheral poly-bromination can significantly enhance the thermal stability of discrete coordination compounds. Here, we compare a pair of strictly isostructural Co(III)-Schiff base complexes that differ only by the presence of 3,5-dibromo substituents on the ligands. Thermogravimetric analysis shows that the onset decomposition temperature increases from approximately 100 °C in the unhalogenated complex to approximately 220 °C in the brominated analogue, accompanied by a shift from multistep to a sharper, more cooperative decomposition profile. Variable-temperature X-ray diffraction indicates improved structural persistence in the brominated crystal. Hirshfeld surface analysis, together with NCI, IGMH, QTAIM, and dispersion calculations, reveals that bromination strengthens the non-covalent interaction network, particularly through increased Br···H contacts and enhanced dispersion forces. Frontier orbital analysis shows a modest lowering of the LUMO energy level. These supramolecular and electronic changes collectively correlate with the observed improvement in thermal stability. This work demonstrates that peripheral poly-bromination offers a practical strategy to enhance the thermal robustness of discrete Co(III)-Schiff base complexes while preserving the core coordination structure.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Junfeng Song,Anming Yang,Yang Song,Xirui Huang,Xingjin Li,Tianzhao Xu,Tiancong Zhao
The treatment of Staphylococcus aureus subcutaneous abscesses is hindered by the protective abscess microenvironment and persistent bacterial colonization. Herein, we present a pH-responsive supramolecular nanoplatform fabricated via single-step coassembly of cationic arginine-derived antimicrobial peptidomimetics (AMPM-1) and natural polyphenols. This process, governed by hydrogen bonding, electrostatic interactions, and hydrophobic packing, effectively masks the cationic charges of AMPM-1, substantially reducing intrinsic hemolytic and cytotoxic properties. In vitro studies demonstrate that the assemblies maintain potent, membrane-disruptive activity against methicillin-resistant S. aureus (MRSA), including dormant and persister subpopulations. In a murine MRSA abscess model, local administration of the quercetin-based assemblies (AMPM-1-QA) simultaneously reduces bacterial burden and attenuates excessive inflammatory signaling. Histological examination confirms accelerated tissue regeneration, characterized by enhanced collagen deposition and anti-inflammatory macrophage polarization. By integrating acid-triggered bactericidal action with polyphenol-mediated immunomodulation, this dual-functional supramolecular strategy offers a promising approach for the stimuli-responsive treatment of recalcitrant localized infections.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2026
·
IF 9.2
Jingyan Tang,Qingguo Xue,Jingsong Wang
High-performance electromagnetic wave (EMW) absorbers are in critical demand to address the escalating electromagnetic pollution and interference issues resulting from the rapid advancement of modern electronic devices and wireless communication technologies. In this work, we report the synthesis of a series of SiO2@Gr/Co-X composite absorbers fabricated via a solution immersion–carbonization strategy. By precisely tuning the loading of magnetic Co nanoparticles, the electromagnetic parameters and microwave absorption properties of the composites were systematically tailored. It is found that SiO2@Gr/Co-20 exhibits strong absorption at 13.43 GHz, delivering a minimum reflection loss (RLmin) of −73.12 dB at a matching thickness of 1.52 mm and an effective absorption bandwidth (EAB) of 4.02 GHz at a matching thickness of 1.34 mm. Mechanistic analysis reveals that interfacial polarization, conductive loss, magnetic loss, and multiple scattering synergistically contribute to the excellent EMW absorption performance. RCS simulations were also conducted to validate their practical application potential. This work not only offers a novel structural modulation strategy for the rational design of efficient EMW absorbers but also establishes a basis for the multifunctional integration of multicomponent heterogeneous composites.
✓ 已验证
DOI
高影响因子
Catalysis Science & Technology
·
2026
·
IF 4
Qin Zhao,Ruize Sun,Xiaonan Liu,Lexi Tang,Jingge Chen,Jicheng Zhou,Wentao Xu
Propane direct dehydrogenation (PDH) is an important way to prepare propylene (C3H6). However, the conventional thermal catalytic process often has the problems of high reaction temperature and side reactions such as carbon deposition, which makes it difficult to balance the conversion of C3H8 and the selectivity of C3H6. In this work, a new method for direct dehydrogenation of low-temperature and high-efficiency propane (C3H8) to C3H6 by microwave catalysis was proposed, and a Pt-Co/SiBeta+SiC microwave catalyst was developed. The results showed that microwave catalysis significantly improved the C3H8 conversion and C3H6 selectivity of the catalyst, and effectively reduced the reaction temperature. Under 450 °C lowtemperature microwave catalysis (MCRM), the initial conversion of C3H8 was as high as 50.4%, and the initial selectivity of C3H6 was as high as 97.2%. Both are significantly better than the 5.9% initial conversion and 95.6% initial selectivity under conventional thermal catalysis (CRM). It was further found that the microwave irradiation significantly reduced the apparent activation energy of the catalyst from 164.4 kJ•mol -1 under CRM to 68.4 kJ•mol -1 under MCRM. This work provides a new idea for the development of low-temperature and high-efficiency PDH catalytic system, and shows the application potential of microwave catalysis in light hydrocarbon conversion.
✓ 已验证
DOI
高影响因子
BIOMACROMOLECULES
·
2026
·
IF 5.9
Chuchu Chen,Zhu Shan,Yihui Gu,Yuchen Ding,Yiqin Yang,Wenjuan Wu,Yongcan Jin,Sehrish Manan,M. Mostafizur Rahman,Bo Jiang
The controlled-release hydrogel with dual-dynamic-bond networks provides superior tunability and stability through collaborative exchange mechanisms, which are often used for drug release. However, the impact of its multiscale structures involving various orientations and cross-linking densities on release kinetics is still poorly understood. Herein, a dual-dynamic-bond cross-linked hydrogel with tunable structures (orientation and cross-linking density) was developed, where the cross-linked network is formed by imine bonds between aminated lignin and oxidized carboxymethyl cellulose, as well as borate ester bonds between 3-aminophenylboronic acid-grafted sodium alginate and epigallocatechin gallate (EGCG). The results showed that the imine/borate ester cross-linked dual-network hydrogel exhibits pronounced pH responsiveness, enabling synergistic release of lignin and EGCG. Compared with the isotropic structures, the anisotropic hydrogel shows significantly faster release for lignin and EGCG along the aligned microchannels, which is attributed to the shortened mass-transfer pathways. In addition, driven by the stronger interfacial interaction of polar groups, the denser network attributed to the increased freeze–thaw cycles further accelerates the co-release of lignin and EGCG. The release process follows a non-Fickian diffusion mechanism and can be well described by the Korsmeyer–Peppas model. This work establishes a direct structure-release kinetics correlation, paving the way for the design of a dual-dynamic-bond hydrogel for precision delivery.
✓ 已验证
DOI
PubMed
高影响因子
ChemCatChem
·
2026
·Vol. 18
·期 9
·e70761
·
IF 4.1
Mengdie Cai,Yulu Xu,Yao Lu,Qi Jin,Yongshuai Chen,Jia-qi Bai,Fang Chen,Zhimin Song,Song Sun
Developing efficient visible-light-driven photocatalysts for overall water splitting remains a significant challenge. Herein, Sn/Cr co-doped SrTiO 3 (SCSTO) was synthesized via a flux-assisted solid-state reaction, with Sn substituting Sr sites and Cr replacing Ti sites in the perovskite lattice. Sn/Cr synergistic co-doping extends optical absorption into the visible region, narrows the bandgap to 3.04 eV, suppresses Ti3+ defects and oxygen vacancies, and promotes charge separation and migration. Benefiting from the rational band structure and defect engineering, under visible-light irradiation (λ > 380 nm), the optimal SCSTO exhibits a hydrogen evolution rate of 15.4 µmol·h − 1 and oxygen evolution rate of 7.34 µmol·h −1 , with outstanding cycling stability. DFT calculations confirm that Cr 3d mid-gap states below the Ti 3d conduction band enhance visible-light response and charge transfer. This work provides a universal and feasible co-doping strategy for designing high-performance perovskite oxide photocatalysts toward efficient solar fuel production, which is instructive for the development of advanced visible-light-driven photocatalytic systems. Graphical A synergistic Sn/Cr dual-site co-doping strategy was developed for SrTiO 3 to enable efficient visible-light-driven overall water splitting.
✓ 已验证
DOI
高影响因子