Journal of Inorganic and Organometallic Polymers and Materials
·
2024
·Vol. 35
·期 1
·206-215
·
IF 3.9
Duan Jinsheng,Liu Zhaogang,Li Yilin,Jia Peijie,Hu Yanhong,Wu Jinxiu
Magnesium aluminum lanthanum hydrotalcite (MgAlLa-CO 3 -LDHs) was modified with diphenyl phosphate to obtain diphenyl phosphate-intercalated magnesium aluminum lanthanum hydrotalcite (MgAlLa-P-LDHs). The prepared materials, MgAlLa-CO 3 -LDHs and MgAlLa-P-LDHs, were subjected to characterization techniques, including Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM), to ascertain their structural and morphological characteristics. Subsequently, these hydrotalcite-based thermal stabilizers were incorporated into polyvinyl chloride (PVC) to fabricate composite materials. The comprehensive evaluation of the composite materials’ thermal stability, mechanical properties, and plasticization performance was conducted through thermal aging tests, tensile experiments, and plasticization tests. The research findings indicate a significant enhancement in the thermal stability of PVC materials with the introduction of hydrotalcite-based thermal stabilizers. Additionally, there were observed improvements in mechanical properties and plasticization performance. This study provides a thorough experimental and theoretical foundation for the application of rare earth hydrotalcite-based thermal stabilizers in PVC, offering valuable insights for the development and application of environmentally friendly PVC thermal stabilizers.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 30
·期 6
·5929-5935
·
IF 2.195
Lei Ying,Ma Leiqiang,Zheng Rui,Li Yu,Wan Rundong,Chen Wen,Zhou Hongwei,Gao Wensheng
In the present work, a series of single phase Ni-doped skutterudite compounds Ni x Co 4−x Sb 12 (x = 0.1, 0.2, 0.3, 0.4, 0.5) were successful synthesized by 5 min microwave heating for the first time. The resulting ingots was pulverized and sintered by spark plasma sintering to fabricate bulk samples, and their microstructure and thermoelectric properties have been investigated systematically. The results show that the matrix grain characteristics are influenced by Ni concentration and microwave irradiation. The Ni 0.3 Co 3.7 Sb 12 bulk has the smallest and uniform grain size of about 1–2 µm. The maximum power factors of Ni x Co 4−x Sb 12 are 2273, 2479, 2711, 2613 and 2526 µWm −1 K −2 respectively. A highest ZT of 0.52 for Ni 0.3 Co 3.7 Sb 12 is achieved at 773 K along with a total thermal conductivity of 3.8 Wm −1 K −1 .
✓ 已验证
DOI
高影响因子
IONICS
·
2023
·Vol. 29
·期 10
·4087-4097
·
IF 2.8
Li Hongwei,Wang Huina,Xie Yueyang,Wang Yukun,Yan Guanghong,Wang Bin,Xue Fei
Doping with oxygen
and nitrogen in graphite felt (GF) is critical for enhancing the activity of the electrode material in vanadium redox flow batteries (VRFB). In this paper, we present a combined approach that utilizes Fe etching and nitrogen functionalization by means of K 2 FeO 4 and NH 3 to modify the surface structure of graphite fibers. The results show that the innovative approach enhances the disordered structure of the surface carbon of GF and substantially improves the oxygen and nitrogen functionalized groups. This modified GF is completely hydrophilic, and its assembled electrode energy efficiency is 80.08% at a current density of 80 mA∙cm −2 , compared with 69.87% for the pristine GF. The energy efficiency of the modified GF was maintained at 81.8% after 50 charge-discharge cycles. This can be attributed to the reduced internal resistance of these modified GF electrode as well as to the improved mass transport and charge redox exchange towards VO 2+ /VO 2 + redox couple. The combined approach of Fe etching and nitrogen functionalization significantly enhances the electrochemical activity of the GF electrode. This improves the performance of the VRFB.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2022
·Vol. 33
·期 8
·5214-5223
·
IF 2.779
Zhang Dewei,Hui Yitao,Cai Junyao,Zhang Manlin,Xu Jianguang,Zhang Qinfang
Cu 3 SbS 4 -based compounds have received significant attention as a promising alternative for p-type thermoelectric materials due to their low-cost, earth abundant resource, and eco-friendly characteristics. However, the practical applications for waste heat utilization and solid-state refrigeration are still limited because of their low conversion efficiency. Herein, a high thermoelectric performance was realized in SiC nanoparticles-dispersed Cu 3 Sb 0.85 Bi 0.06 Sn 0.05 S 4 composites. SiC nanoparticles additives generate the interface potential barriers and increased energy-dependent carrier scattering, leading to enhanced power factor. Moreover, SiC nanoparticles significantly reduces the lattice thermal conductivity due to enhanced phonon scattering. As a result, a high ZT value of 0.61 is achieved at 573 K for the CASBT/0.05 wt % SiC sample, which is enhanced by 39% compared with the pristine sample. Meanwhile, an outstanding average ZT of 0.31 is obtained among the investigated temperature range. This work provides a feasible guidance for designing advanced thermoelectric materials.
✓ 已验证
DOI
高影响因子
CATALYSIS LETTERS
·
2018
·Vol. 148
·期 3
·953-957
·
IF 2.911
Wang Tingting,Wang Zhiming,Zhao Junjing,Yu Qing,Wang Zhongwei
2,4,6-Trimethylbenzoyldipenylphosphine oxide (TPO) is an important photoinitiator, nevertheless some drawbacks exist in its synthesis. So V/MCM-41 catalysts were designed. Compared with commonly used VO(acac) 2 , V/MCM-41 catalysts exhibited excellent TPO yield (92.5%), which makes the usage of inorganic vanadium possible and is benefit both in academic and in industry. Graphical
✓ 已验证
DOI
高影响因子
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES
·
2020
·Vol. 36
·期 3
·439-446
·
IF 1.063
Wang Yongtao,Guo Xianwei,Lin Zhiyuan,Yang Yubo,Wu Lingqiao,Liu Huan,Yu Haijun
The sphene-type solid electrolyte with high ionic conductivity has been designed for solid-state lithium metal battery. However, the practical applications of solid electrolytes are still suffered by the low relative density and long sintering time of tens of hours with large energy consumption. Here, we introduced the spark plasma sintering technology for fabricating the sphene-type Li 1.125 Ta 0.875 Zr 0.125 SiO 5 solid electrolyte. The dense electrolyte pellet with high relative density of ca. 97.4% and ionic conductivity of ca. 1.44× 10 −5 S/cm at 30 °C can be obtained by spark plasma sintering process within the extremely short time of only ca. 0.1 h. Also the solid electrolyte provides stable electrochemical window of ca. 6.0 V( vs. Li + /Li) and high electrochemical interface stability toward Li metal anode. With the enhanced interfacial contacts between electrodes and electrolyte pellet by the in-situ formed polymer electrolyte, the solid-state lithium metal battery with LiFePO 4 cathode can deliver the initial discharge capacity of ca. 154 mAh/g at 0.1 C and the reversible capacity of ca. 132 mAh/g after 70 cycles with high Coulombic efficiency of 99.5% at 55 °C. Therefore, this study demonstrates a rapid and energy efficient sintering strategy for fabricating the solid electrolyte with dense structure and high ionic conductivity that can be practically applied in solid-state lithium metal batteries with high energy densities and safeties.
✓ 已验证
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2019
·Vol. 125
·期 11
·765
·
IF 1.784
Xiao Xuling,Li Jun,Wu Jie,Lu Donglin,Tang Chao
In this paper, the negative photoconductivity (NPC) was observed in molybdenum disulfide (MoS 2 ) prepared by chemical vapor deposition. The conductivity drops by 15% in stable light excitation. We speculate that the generation of NPC is due to the electronic transition to the defect state level, which reduces the rate of movement of non-equilibrium carrier. In the low-defect system, free excitons predominate, and the material exhibits positive photoconductivity. It is beneficial to the research on a new single-wavelength photodetector based on NPC.
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2013
·Vol. 180
·期 7
·545-553
·
IF 3.434
Zhu Shanshan,Gan Ning,Pan Daodong,Li Yi,Yang Ting,Hu Futao,Cao Yuting,Wu Dazhen
We have prepared core-shell magnetic molecularly imprinted polymer nanoparticles for recognition and extraction of tributyl tin (TBT). The use of particles strongly improves the imprinting effect and leads to fast adsorption kinetics and high adsorption capacities. The functional monomer acrylamide was grafted to the surface of Fe 3 O 4 nanospheres in two steps, and MIP layers were then formed on the surface by creating a MIP layer on the surface consisting of poly(ethyleneglycol dimethacrylate) with a TBT template. The particles were characterized in terms of morphological, magnetic, adsorption, and recognition properties. We then have developed a method for the extraction of TBT from spiked mussel (Mytilidae), and its determination by liquid chromatography-tandem mass spectrometry. The method has a limit of detection of 1.0 ng g −1 ( n = 5) of TBT, with a linear response between 5.0 and 1,000 ng g −1 . The proposed method was successfully applied to the determination of trace TBT in marine food samples with recoveries in the range of 78.3–95.6 %. The preparation procedures of core-shell magnetic molecularly imprinted polymer nanoparticles for recognition and extraction of tributyl tin (TBT) in seafood
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2020
·Vol. 55
·期 20
·8642-8650
·
IF 3.553
Chen Shaoping,Xu Libin,Li Rong,Fan Wenhao,Chen Yanzuo,An Decheng,Wang Wenxian,Wu Yucheng
Energy filtering effect is helpful to decouple Seebeck coefficient and electric conductivity, and dopant is helpful for improving conductivity; in this work, synergetic function of both is supposed to enhance zT values of tellurium.
In bulk Te and Sb 0.003 Te 0.997 , the Ni/Te heterojunction was built by electroless plating combined with spark plasma sintering. The Ni/Te interface barrier successfully decoupled the relationship between the Seebeck coefficient and the electrical resistivity. The Seebeck coefficient and resistivity of Ni/Te samples increased by 37.9% and decreased by 28.1%, respectively. Meanwhile, the thermal conductivity of the Ni/Te samples decreased by 25.8% (T = 300 K), and the zT value was increased by 36.4% compared to the pure Te sample. Consequently, a peak zT of 0.96 at 550 K is achieved in 18wt %Ni/Sb 0.003 Te 0.997 sample,which is 50% higher than Sb 0.003 Te 0.997 samples. This work indicates that electroless plating combined with spark plasma sintering is an effective method to construct heterojunction in bulk materials. This method should be widely applicable to various materials for achieving better thermoelectric properties.
研究领域:
材料科学
·
凝聚态物理
·
能源材料
·
半导体物理
·
热电转换
✓ 已验证
DOI
高影响因子
IONICS
·
2024
·Vol. 30
·期 6
·3111-3119
·
IF 2.4
Teng Zeyu,Wang Zhilong,Li Zhongcheng,Chen Kanghua
Silicon is a strong competitor for the anode of the next generation of lithium-ion batteries, and ball-milled silicon has broad prospects as a low-cost method for preparing nano silicon. In order to match ball-milled silicon, it is imperative to develop better bonding agents with lower costs. Through adding amino silane coupling agent, the performance of ball-milling silicon anode is enhanced. This study explored the network structure formed by amino silane coupling agent with different chain lengths and polyacrylic acids. Herein, the crosslinked network prepared with 3-[2-(2-aminoethyl amino) ethyl amino] propyl-trimethoxysilane as coupling agent had the best performance, and the initial discharge capacity of the silicon anode prepared by this binder reached 3297.4 mAh·g −1 at a constant current density of 0.5A·g −1 , the initial Coulomb efficiency reached 92.25%. After 100 cycles, the discharge capacity of anode was still maintained at 2229.5 mAh·g −1 with excellent charge/discharge performance.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
高分子化学
·
表面改性
✓ 已验证
DOI
高影响因子
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING
·
2023
·Vol. 129
·期 11
·794
·
IF 2.7
Wang Xuekai,Cao Yongze,Yan Xianglan,Li Lei,Zhang Xizhen,Zhang Jinsu,Chen Baojiu
17K 2 O–33SnO–50P 2 O 5 –xMnCl 2 glasses with x = 0, 0.6, 1.2, 1.8, 2.4, 3.0 were made using melt quenching at 500 °C low temperature. The structure and photoluminescence properties of these glasses were investigated, and the water resistance was evaluated. The experimental results show that the effectively energy transfer from Sn 2+ to Mn 2+ occurs, and when Mn 2+ doping at 3.0, the energy transfer efficiency reaches 74%. Under 340 nm excitation, the emission wavelength is in the range of 500–800 nm, covering the absorption wavelength of chlorophyll P R and P FR , which indicates that the low temperature glasses can be used for plant cultivation. This glass material was immersed in water for 24 h, and the luminescence intensity decreases 10%. This indicates that the glass material has certain waterproof property.
研究领域:
材料科学
·
农业光学
·
无机非金属材料
·
光生物学
·
功能玻璃
✓ 已验证
DOI
高影响因子
JOM
·
2020
·Vol. 72
·期 9
·3179-3185
·
IF 2.054
Wang Xun,Jiao Fen,Qin Wenqing,Li Zihan,Wang Na,Liu Wei,Yang Congren
Waste printed circuit boards (WPCBs) are an essential component in electronic waste (e-waste), and contain a number of valuable metals (e.g., Cu, Sn) as well as non-metal resources (e.g., brominated epoxy resin). Currently, most of the non-metals are disposed of in landfills, causing environmental problems. In this study, a combination of pyrolysis and physical separation is proposed to recover valuable resources, including both metals and non-metals, from WPCBs. The WPCBs were pyrolyzed at 700°C under a nitrogen atmosphere. Pyrolysis oil and gas can be reused as fuel for the pyrolysis of WPCBs. Metals like copper, tin, and iron in the pyrolysis residues were separated by selective crushing, sieving, gravity separation, and magnetic separation. Finally, rich copper (Cu 82.21%, Sn 1.47%), rich tin (Cu 53.20%, Sn 13.43%), rich iron (Fe > 63%), and non-metal products were obtained, and the total recoveries of copper, tin, and iron were 95%, 86%, and 76%, respectively.
研究领域:
环境科学
·
资源循环利用
·
冶金工程
·
固体废物处理
·
清洁生产技术
✓ 已验证
DOI
高影响因子