Journal of Food Measurement and Characterization
·
2026
·
IF 3.6
Liu Shiqi,Zhang Li,Cui Ruiguo,Sun Yating,Wang Mengshi,Liu Weiwei,Song Lijun
In this study, four distinct pretreatment techniques were employed to process the insoluble dietary fibers (IDF) of Korla fragrant pears ( Pyrus sinkiangensis Yü ) (KFP) before their extraction. The pretreatment methods included ultrasound-assisted treatment (UA), microwave application (MA), high-pressure hygrothermal treatment (HPHH), and combined enzyme hydrolysis (CEH). A comparative analysis demonstrated significant variations in extraction efficiency, total phenolic content (TPC), structural characteristics, and functional properties among the differently processed IDF samples. The processed IDF samples exhibited altered physicochemical properties, such as increased porosity with surface cracks, reduced crystallinity and molecular weight (M w ), and enhanced functional capabilities. Among the pretreated samples, the CEH-treated IDF showed optimal performance indicators, including swelling capacity (3.06 mL/g), metal cation exchange capacity (0.47 mmol/g), glucose adsorption capacity (4.76 mmol/g), cholesterol adsorption capacity (10.31 mg/g at pH 2.0 and 16.65 mg/g at pH 7.0), and TPC. Multivariate analysis revealed a negative correlation between functional properties and crystallinity/M w , while a positive correlation was observed with total phenolic content. These findings provide a comprehensive reference for the extraction, structural modification, and practical application of KFPIDF.
✓ 已验证
产品关联
DOI
高影响因子
COLLOID AND POLYMER SCIENCE
·
2026
·
IF 2.9
Deng Anzhong,Jiang Haoyang,Liu Na
Epoxy resins (EPs) have gained widespread industrial adoption due to their exceptional mechanical properties, chemical resistance, and electrical insulation characteristics. However, their inherent brittleness caused by highly cross-linked networks significantly limits their application under impact loading conditions. This study demonstrates a solvent-free strategy for significantly enhancing the toughness of epoxy resins while maintaining their mechanical strength and thermal stability through incorporation of hyperbranched epoxy resins (HPEs). At an optimal 20 wt% loading, the HPE-modified epoxy system exhibits a remarkable 276% improvement in impact strength with simultaneous enhancement of tensile and flexural properties, accompanied by the reduction in glass transition temperature. Comprehensive characterization reveals that this exceptional performance stems from three synergistic mechanisms: free volume fraction (0.2623% to 0.5708%), stress-induced microvoid formation, and optimized crosslinking via terminal group interactions, offering new insights for developing high-performance epoxy composites through sustainable processing.
✓ 已验证
产品关联
DOI
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2026
·
IF 3.3
Deng Renjie,Tian Yao,Wei Yanan,Liu Huajie
Para-Nitrotoluene ( p -NT) is mainly used as synthetic intermediates, raw materials for explosives, solvents, and surfactants, and is widely used in chemical and material fields. This conventional mixed acid (HNO 3 –H 2 SO 4 ) method predominantly yields ortho-nitrotoluene ( o -NT) and generates substantial acid waste, contributing to environmental pollution. This study presents a novel, eco-friendly approach for the selective synthesis of p -NT under mild conditions. By employing solid acid catalysts in place of liquid acids, utilizing nitrogen dioxide (NO 2 ) as a green nitrating agent, and incorporating oxygen to enhance efficiency, improved outcomes were achieved. Among the various methods tested, BiCl 3 –H 3 SiO 3 demonstrated superior catalytic activity and ease of separation. The optimized conditions resulted in a 86.7% conversion rate of toluene (TB) with a 58.6% selectivity for p -NT and a p/o ratio of 1.59. The catalyst was characterized by XRD, BET, ICP-AES, FTIR, TG/DTG, NH 3 -TPD, Py-FTIR, and XPS techniques, and the theoretical calculations and experimental results were combined to propose a potential catalytic nitration mechanism.
✓ 已验证
产品关联
DOI
高影响因子
Nano-Micro Letters
·
2026
·Vol. 18
·期 1
·295
·
IF 38.5
Zeng Li,Jiang Chenhui,Li Yuan,Yin Hao,Li Qichao,Liu Hezhou,Guo Yiping
A monolithic, structurally flexible, continuous Pb(Zr 0.52 Ti 0.48 )O 3 (PZT) piezoelectric fiber was innovatively fabricated through network architecture design.
The PZT framework well inherited the macro- and micro-structure of the mesh fabric, endowing the PZT-silicone composite material with high stretchability up to 220%.
The developed strain sensor exhibited both high stretchability (100%) and high sensitivity (39.57 mV kPa −1 ), thus enabling its application in subtle surface roughness perception and large-strain human motion monitoring.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Food Measurement and Characterization
·
2026
·
IF 3.6
Xu Yunfei,Niu Jiale,Li Haowei,Chen Shihua,Hu Yuansen,Chen Si,Wang Zhiyi,Wang Kai,Yi Yanjie
Peanut peptides have high biological activity but are easily hydrolyzed during gastrointestinal transit, which may potentially lead to reduced or lost bioactivity. An effective approach to address this issue is to introduce polyphenols and form peptide-polyphenols complexes via non-covalent. Here, selenium-enriched peanut peptides (SePPs) were prepared from selenium-enriched peanuts by protease hydrolysis through optimizing enzymatic hydrolysis conditions using response surface methodology, and fractionated into P1 (< 3 kDa), P2 (3–10 kDa), and P3 (> 10 kDa) through ultrafiltration fractionation. Next, nine purified complexes were prepared between three peptides and polyphenols including ferulic acid (FA), tea polyphenols (TP), and proanthocyanins (PAC). The content of each free polyphenol was significantly reduced after complexation through HPLC detection. All complexes showed the hydrophobicity decrease, with P1-FA having the lowest value. Meanwhile, P1-FA had the smallest particle size (78.3 ± 2.1 nm), excellent dispersibility (polydispersity index, PDI = 0.12 ± 0.01), and more stable structure. Then, antioxidant evaluation indicated the peptide-polyphenols complexes had lower IC50 values for hydroxyl free radical scavenging (2.02 mg/mL), ABTS (1.72 mg/mL), and DPPH (1.82 mg/mL). The selenium content (mg/kg of dry complex solids) of P1-FA was determined to be 2.445 mg/kg, which is 36.29% higher than the starting material. Furthermore, after in vitro simulated digestion, the complex P1-FA still maintained relatively high antioxidant activity, demonstrating its prominent in vitro gastrointestinal stability. In conclusion, FA interacts with small molecule peptide through hydrogen bonding networks and hydrophobic microenvironments, synergistically enhancing their stability and antioxidant activities, which provides the theoretical basis for the development of selenium-enriched functional food.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2026
·
IF 4.1
Wei Xiaolan,Wang Peng,Li Linjin,Luo Zhu,Ye Xinyuan,Long Jiujiang,Liu Xianghui
Biogenic amines (BAs), primarily formed through the microbial degradation of proteins, are important markers indicating food fermentation and spoilage. On the demand of on-site monitoring of food quality and safety, electrochemical and optical sensors have been developed, focusing on the detection of the total volatile amines or a specific amine. However, the multiplex detection of BAs with high accuracy and sensitivity still remains a major challenge. The sensor array strategy that mimics the biological olfactory sense provides an effective and powerful route to achieve multiplex detection of BAs. Herein, (metallo)porphyrin-based hydrogen-bonded organic frameworks embedded with silver nanoparticles were prepared and used as receptors to construct the surface-enhanced Raman scattering (SERS) sensor array, leveraging the multiple chemical interactions and the sharp Raman signals of (metallo)porphyrins, and the porous and flexible structure of the supramolecular frameworks. This SERS sensor array demonstrated a successful discrimination of ten BAs, an accurate quantitation of three BAs, and a successful simultaneous determination of three BAs in pork samples. Using the total volatile basic nitrogen as a spoilage label, the platform achieved over 90% accuracies in freshness discriminations for pork, beef, and chicken samples. In comparison with the existing detection methods, the proposed SERS sensor array strategy based on porphyrin- and metalloporphyrin-based hydrogen-bonded organic frameworks exhibits operational simplicity, rapid response, high sensitivity, as well as multiplex detection capability. Thus, it demonstrates a significant practical potential for applications in the production line and the supply chain of foods.
✓ 已验证
产品关联
DOI
高影响因子
Nano-Micro Letters
·
2026
·Vol. 18
·期 1
·294
·
IF 38.5
Yao Zhiwei,Liang Changsheng,Bi Chenghao,Zhou Wenyuan,Ren Ke,Deng Ming,Ding Shuo,Xiang Chaoyu
A new quantum dot (QD) films with negligible redshift of photoluminescence spectra after film fabrication from QD solution.
An electron barrier around QDs realized by adopting ligands with concentrated electron distribution.
Record external quantum efficiency of light-emitting diodes based on CsPbI 3 QDs (28.9% at 640 nm and 32.0% at 657 nm).
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Wang Zixin,Lv Zeen,Ge Yuxuan,Xue Ruiyang,Wu Fang,Han Haijie,Wang Yin
The management of ocular surface inflammation, particularly in conditions like dry eye disease (DED), remains challenging due to multiple pathogenic causes and ocular barriers. Traditional eye drops usually provide transient and partial symptom relief, necessitating combined therapies to break the vicious cycle of oxidative stress and inflammation. To surmount these limitations, a polyphenol-based eye drop is developed via the self-polymerization of rosmarinic acid in the presence of hyaluronic acid, followed by co-assembly with cerium ions to afford monodispersed RHC NPs. To enhance the ocular retention efficiency, thiol groups are further decorated on NPs (termed as s -RHC NPs). In two mouse models of DED, topical administration of s -RHC NPs leads to comprehensive relief of symptoms, including inflammatory response suppression, corneal epithelial defect repair, and tear secretion recovery. We envision that this work might facilitate the treatment of DED and inspire the design of polyphenol-based nanoparticles via a self-polymerization strategy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Protocols
·
2026
·
IF 18.4
Yuan Lei,Tang Ruolan,Xie Shaofang,Lin Zuobao,Cai Pei,Cai Shang
The mammary gland serves as a pivotal model for studying stem cell dynamics and breast cancer, the most prevalent malignancy worldwide. Developing a long-term organoid culture system to study the normal physiology and pathophysiology of mammary glands in vitro is of paramount importance. However, current organoid systems lack the morphological and functional fidelity required to model its complex physiology. Here we present a detailed Protocol to establish a long-term, dynamic three-dimensional culture system for mouse mammary organoids, which we call ‘mini-glands’, that recapitulates in vivo morphogenesis and functional cycles. This method uses basal stem cells to generate organoids through sequential phases: sphere formation, polarity induction, symmetry breaking, branching morphogenesis and pseudoestrous cycle simulation. The resulting ‘mini-glands’ replicate the natural gland’s branched architecture and undergo developmental stages mimicking puberty, pregnancy, lactation and involution. Furthermore, the system enables lineage tracing of cell fate transitions and oncogenic transformation studies via genetic manipulation. By bridging the gap between in vitro models and in vivo complexity, this platform advances studies in mammary gland biology, breast cancer initiation and therapeutic screening. The Protocol can be readily performed by researchers with basic experience in mammalian cell culture and requires no specialized instrumentation. A full culture cycle typically takes ~2 weeks to produce mature, highly branched ‘mini-glands’.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2026
·
IF 18.1
Zhu Xiangyu,Lin Jiawen,Liang Shuli,Qiu Chenyi,Jiang Yuchen,Liu Hengrui,Zhu Kun,Wang Qi,Du Chenfeng,Li Yonghao,Mao Yuanhui,Zheng Huanbin,Liu Chengan,Zhao Yeyao,An Meirong,Wu Yifeng,Liu Jun,Zhang Xinying,Lin Ying
Pyomelanin has been extensively applied in various fields. However, the yield of pyomelanin isolated from natural producers is low. Engineering microbial biosynthesis is considered a sustainable and economically feasible alternative. We utilize engineered Komagataella phaffii to increase the yield of homogentisic acid by 66-fold by balancing three different biosynthetic modules and further synthesizing pyomelanin by oxidative polymerization. During this process, we establish a pyomelanin color screening system and apply this system to perform directed evolution of 3-deoxy-D-arabinoheptulosonate 7-phosphate synthase and semirational design modification of hydroxyphenylpyruvate dioxygenase. We report the difference of pyomelanin between oxidative polymerization under alkaline conditions and that under laccase treatment. After high-density fermentation in a 5-L fermenter for 204 h, strain Pyo29 achieve the highest titer (70.5 ± 0.7 g/L). Finally, we demonstrate the potential application value of pyomelanin. This study provides a feasible solution for high-yield pyomelanin biosynthesis with substantial industrial production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY
·
2026
·
IF 3.5
Long Neng-Bing,Zhu Hong-Lin,Li Tian-Hua,Zhang Rui-Feng
A large-sized 3D microflow support was prepared by chemical liquid deposition of an epoxy-based porous polymer within a 3D melamine sponge. This novel support demonstrated advantages over traditional microfluidic reactors in terms of easier scalability, simplified enzyme loading, and superior multiphase dispersion. The resultant composite sponge was utilized as a microflow support for the immobilization of phospholipase D (PLD) through an adsorption and cross-linking method. Under optimal immobilization conditions, the loading capacity and specific activity of the immobilized PLD were 50.2 mg/g support and 14.5 U/mg protein, respectively. The PLD-immobilized microflow supports were positioned in a columnar reactor, where a biphasic transesterification reaction was conducted in a continuous circulation mode powered by two pumps. The PLD-catalyzed reaction yielded phosphatidylserine (PS) with high yields and reaction ratios. Under optimized conditions, the PS yield reached as high as 93.1% within 4 h at 45 °C, by using free PLD the PS yield reached only 61.5% within 12 h. After 10 cycles, the immobilized PLD retained 76% of its original activity.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
DRUGS IN R&D
·
2026
·
IF 2.5
Liu Yang,Shi Qiong-zhi,Wang Yanchen,Long Ze-chun,Han Man,Zeng Yuan,Xie Xiang-yang,Liu Hui
Background and Objective Lornoxicam (LOX) is a nonsteroidal anti-inflammatory drug used for pain management but requires frequent dosing due to its short half-life. This study aimed to develop a biphasic-release multiple-unit tablet (MUT) to achieve rapid and sustained LOX release with dose flexibility. Methods LOX-loaded extended-release (ER) pellets were prepared by fluidized-bed coating of microcrystalline cellulose cores and optimized using a Box–Behnken design. The pellets were coated with Eudragit ® RL/RS and combined with an immediate-release (IR) component to form MUTs by conventional tableting. Pellets and tablets were evaluated for physicochemical properties and in vitro drug release. Results Optimized ER pellets showed high drug-loading efficiency (92.2 ± 3%) and good mechanical properties. Drug release from ER pellets was best described by the Korsmeyer–Peppas model, indicating Fickian diffusion. The MUTs exhibited an initial LOX release of approximately 38%, followed by sustained release for 24 h, with > 90% cumulative release. Split tablets demonstrated release profiles comparable to intact tablets ( f 2 > 50). Conclusion The developed biphasic-release MUTs provide rapid onset, sustained LOX delivery, and reliable dose flexibility, representing a promising oral formulation for LOX therapy.
✓ 已验证
产品关联
DOI
高影响因子