SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2026
·
IF 4.8
Pei Wu,Yang Jiao,Li Cheng,Cheng Yao,Xiong Chen
A novel near-infrared luminescent fluorescent composite material, TCPP-His@ZIF-8, was successfully constructed. Through an amide condensation reaction, Tetrakis (4-carboxyphenyl) porphyrin (TCPP) was covalently anchored onto the surface of L-histidine (His) -modified ZIF-8 metal-organic framework. This material serves as a highly sensitive near-infrared fluorescence sensing platform. Upon introducing mitoxantrone (MITX) as a fluorescence quencher, the material achieves highly selective and sensitive fluorescence detection of MITX. Mechanistic studies revealed that the fluorescence quenching of TCPP-His@ZIF-8 by MITX involves multiple mechanisms: the shift in absorption peaks confirms the presence of static quenching, while FRET is the primary mechanism responsible for the shortening of fluorescence lifetime, i.e., the dynamic quenching process. The inner filter effect (IFE) contributes partially to the reduction in apparent fluorescence intensity but is not the dominant factor. Under optimal experimental conditions, the sensor exhibits good linearity for MITX detection within the range of 0.125–14.0 μM, with a detection limit as low as 91.93 nM. Anti-interference and selectivity experiments demonstrated that common interferents and antibiotic analogues did not significantly affect detection. Furthermore, spiked recovery experiments in real samples such as tap water, milk, and human serum yielded satisfactory results, validating the reliability and potential of this method for practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2026
·
IF 6.9
Xiaoyan Guo,Lei Wu,Qiuyan Ye,Yingjie Lv,Nan Wang,Jiaqiao Li,Jiaxu Zhang,Yiku Xu,Yongnan Chen,Yiming Chen
Although micro-arc oxidation (MAO) coatings improve the mechanical properties of titanium alloys, their porous structural defects tend to act as pathways for corrosive agents and as adhesion sites for contaminants. In this study, a superhydrophobic coating was developed on TC-4 titanium alloy by combining in-situ hydrothermal synthesis of ZIF-8 with POTS surface modification, thereby forming a rough surface with low surface energy. The POTS/ZIF-8@MAO composite coating exhibits strong adhesion to the substrate through both physical and chemical bonding. Consequently, it demonstrates excellent chemical and thermal stability, maintaining a water contact angle (WCA) of 156.53° ±2.47° and a sliding angle (SA) of 6.32° ±1.16° even under extreme conditions. Due to its low water adhesion, the coating demonstrates significant self-cleaning ability against both solid and liquid contaminants. Electrochemical analysis reveals that it improves corrosion inhibition by up to 99% compared to pristine MAO-treated titanium alloy, providing an effective protective barrier for the substrate. This work proposes a promising strategy that may potentially expand the application scope of titanium alloys.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2026
·
IF 10.6
Qian Yin,Wei Dai,Chunxia Liu,Kai Sun,Guoning Zhou,Youbin Si
Estrogenic contamination in vegetable foods, along with its associated safety implications, has become a growing global concern. Trametes versicolor laccase, a robust multicopper oxidase, efficiently catalyzed precipitation polymerization, promoting the rhizoremediation of four estrogenic chemicals (ECs) in water-lettuce. Relative to the laccase-deficient control, fungal laccase-driven polymerization significantly accelerated the dissipation of estrone (E1), 17 β- estradiol (E2), 17 α -ethinylestradiol (EE2), and bisphenol A (BPA) in the rhizosphere solution over 36 h. This treatment increased dissipation efficiencies from 32.18 to 61.36 % to 91.07–100.00 % and elevated dissipation rate constants by 7.26–17.31 fold. Phenoxyl radicals acted as the key intermediates in the enzymatic polymerization, resulting in the formation of high molecular mass (MM), hydrophobic precipitates. The entire process is environmentally friendly, highly efficient, and non-hazardous, fully aligned with the objectives of green and low-carbon development. Especially, the large MM and strong hydrophobicity of the formed precipitates were difficult to be taken by lettuce roots and transported to aerial tissues, significantly reducing EC accumulation in edible parts of lettuce. In the laccase-deficient control, the peak concentrations of E1, E2, EE2, and BPA in lettuce roots were 80.04, 156.67, 237.60, and 123.67 μmol·kg −1 , respectively, with corresponding root uptake rate constants ( k 2 ) ranging from 0.05 to 0.22 h −1 . In contrast, fungal laccase-driven precipitation polymerization reduced root concentrations of these ECs by 18.65–74.04 %, modulated k 2 values to 0.02–0.43 h −1 , and hindered their root-to-shoot translocation. This work underscores the potential of fungal enzyme in efficiently driving the supramolecular polymerization and subsequent sequestration of ECs into non-toxic precipitates within the rhizosphere, thus blocking their bioavailability to vegetable crops and minimizing associated dietary risks.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
BIORESOURCE TECHNOLOGY
·
2026
·
IF 8.2
Jun Wang,Songyin Zhao,Lehang Li,Manman Zhu,Man Zou,Xin Su,Jie Gu,Yan Xu,Yao Nie
Drug molecules used to treat complex diseases often contain cyclic chiral moieties. Specifically, the synthesis of fused-ring alcohols (e.g., chiral β-tetralol and its derivatives) by chemical methods is challenging. Medium-chain alcohol dehydrogenase (MDR) are widely used in the asymmetric reduction of potential chiral ketones to chiral alcohols, and can be used to synthesize chiral fused-ring alcohols. In this study, we integrated enzyme sequence and structural information in an ancestral sequence reconstruction method. This process identified ancestral medium-chain alcohol dehydrogenase N42, with average conversion and selectivity rates exceeding 98% towards 19 ketone substrates (classified into fused-ring, heterocyclic, and aryl groups), and enhanced thermostability (melting temperature 9.9 °C higher than that of its descendant). Computational analysis explained the origin of the N42 activity and revealed a unique set of functional regulatory sites in the MDR family. This ancestral reconstruction strategy combines sequence and structural information provides novel insights into enzyme discovery and functional regulation, might prove useful for studying enzyme functional evolution in families with deep structural differentiation.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
·
2026
·
IF 6.7
Xuepeng Wang,Zengtong Deng,Wei Deng,Yimin Xiong,Jun Xu,Long Jiang,Yi Wang,Sheng Su,Song Hu,Jun Xiang
Bio-oil holds great promise as a renewable alternative to fossil fuels via upgrading. Its catalytic pyrolysis upgrading is often limited by severe coking, which hinders further technological advancement. Component interaction plays an important role in coke formation during bio-oil pyrolysis. However, the influence remains unclear when the catalyst is introduced. Therefore, this study aims to elucidate the interactions among components during catalytic bio-oil pyrolysis and to investigate their effects on aromatic evolution and coking behavior. Results indicate that increasing temperature from 600 °C to 800 °C inhibits coke formation during bio-oil pyrolysis, decreasing coke yield (based on heavy components basis) from 31.2 % to 20.1 %. Interactions among bio-oil components can facilitate the cracking of heavy tar into small-molecule aromatics, thereby suppressing the formation of large aromatic systems, decreasing coke yields (based on heavy components) from 27.5 % to 23.1 % at 600 °C. In contrast, the introduction of a catalyst promotes the transformation of monocyclic aromatics into bicyclic ones, but inhibits their further condensation into coke, further decreasing coke yields (based on heavy components) from 18.5 % to 16.8 % at 800 °C. This work provides valuable insights into understanding the coking mechanism during catalytic pyrolysis of bio-oil and offers guidance for catalyst design.
✓ 已验证
产品关联
DOI
高影响因子
Food Packaging and Shelf Life
·
2026
·
IF 10.8
Huan Zhang,Haozhe Kong,Farhana R. Pinu,Jinquan Feng,Penghui Zhu,Yunfei Xie,Zhilong Yu
A Cu-based metal–organic framework called HKUST-1 holds critical potential for minimizing postharvest fruit waste by regulating C 2 H 4 concentration. However, their practical application in food packaging remains constrained by structural instability and diminished C 2 H 4 adsorption under high humidity. Here, we improved the hydrophobicity and gas adsorption performance of HKUST-1 with folic acid and silver nanoparticles (AgNPs) using a simple post-synthetic modification strategy. The moisture resistance was significantly enhanced with water contact angle increasing from 55.03° to 103.70°. For HKUAg-1, the C 2 H 4 adsorption capacity increased up to 126.66 cm 3 /g STP, showing a 10 % increase compared with HKUST-1. For the modified material, Cu 2 ⁺ and AgNPs serve as the primary adsorption sites, while folic acid functions as a secondary site that further enhances C 2 H 4 adsorption. Finally, HKUAg-1 was applied to bananas, and the results showed that under 90 % relative humidity, the fruits retained a yellow-green appearance up to day 7. Starting from day 3, HKUAg-1 significantly reduced weight loss, C 2 H 4 production, respiration rate, and downregulated pectin esterase and pyruvate kinase activities. The results suggest that HKUAg-1 has great potential for use in active packaging to delay ripening and extend the shelf life of bananas even under high-humidity conditions.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.7
Jian Wang,Chengliang Zhao,Fang Wang,Lei Xie,Chong Tan,Zigui Luo,Haibo Sun,Chuntao Chang
This work presents the fabrication of low-loss, high-permeability Fe-Si soft magnetic composites (SMCs) utilizing alumina-coated and subsequently annealed Fe-Si powder. Appropriate annealing preserves a uniform, dense, and continuous alumina insulating layer, enabling optimization of the magnetic properties through powder annealing. The optimal annealing duration for Fe-Si SMCs was identified as 180 min, yielding a minimum core loss of 259.1 mW/cm 3 and a peak permeability of 94.85 (measured at 50 mT/100 kHz). The observed reduction in hysteresis loss arises from the combined influence of grain growth and stress relaxation during the annealing process. A uniform insulating layer effectively restricts induced eddy currents to individual powder particles, thereby minimizing eddy current losses. However, prolonged annealing compromises the coating’s structural integrity, resulting in a decline in magnetic performance. This work introduces a systematic strategy for enhancing the overall magnetic properties of SMCs by precisely controlling the annealing time of the powders, establishing a distinct correlation between coating evolution and composite performance. These insights provide practical direction for the high-efficiency deployment of soft magnetic composites in high-frequency magnetic applications.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.2
Zixuan Zhang,Tengxin Huang,Xiaogang Lu,Runli Gao,Chengxin Pei,Junjie Ding,Hongmei Wang
Despite their prohibition under the Chemical Weapons Convention (CWC), chemical warfare agents (CWAs) remain in illicit use and pose a persistent threat to public safety and ecological integrity through accidental or intentional environmental release. Therefore, accurately identifying the source of these agents is critical for ensuring global chemical security. Herein, we develop a novel methodology that integrates comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry (GC × GC-TOFMS) with multiple machine learning techniques to discriminate the synthetic pathways of structurally analogous VX and VR nerve agents. A graph learning model was developed to transform chromatograms into discriminative features, enabling a subsequent Res-Net 50 classifier to achieve 94.4% and 100% accuracy in route discrimination for VX and VR, respectively. And a total of 163 and 143 chemical attribution signatures (CASs) were identified for VX and VR, respectively. Hierarchical cluster analysis (HCA) successfully discriminated the synthetic pathways with 100% accuracy for VX and 93.3% accuracy for VR, while both principal component analysis (PCA) and orthogonal partial least squares discriminant analysis (PLS-DA) achieved perfect classification with R 2 = 1. Notably, a self-organizing map (SOM) model was applied for the first time to chemical attribution. This study establishes a new paradigm for multi-machine-learning-assisted source tracing of highly similar environmental contaminants, enhancing the interpretation of complex chemical data and advancing the integration of analytical chemistry with data science for environmental forensics.
✓ 已验证
产品关联
DOI
高影响因子
Chemical Engineering Journal Advances
·
2026
·
IF 6.9
Xiao-Dan Liu,Xiaomin Kang,En-Peng Du,Rui-Di Sun,Jie-Shu Qian,Li Zhou
The electrocatalytic formaldehyde oxidation reaction (FOR) on copper–based catalysts enables anodic hydrogen production and serves as an alternative to the oxygen evolution reaction by lowering the voltage requirement for water electrolysis. However, Cu–based electrocatalysts are constrained by a narrow operating potential window that limits attainable current densities, while insufficient long–term stability further restricts practical application. Herein, simultaneous enhancement of activity and stability is achieved by fabricating rough copper nanosheets on nickel foam (Cu–NF). The rough copper nanosheets increase the density of accessible active sites, enabling current densities up to 500 mA·cm −2 at 0.45 V vs RHE within the limited operating potential window. Moreover, the mechanically robust nickel foam scaffold helps preserve electrode integrity during prolonged anodic operation, while the dynamic Cu 0 /Cu+ surface evolution in the catalytic layer supports sustained activity, enabling stable operation for over 200 h. This work provides a general design guideline for achieving a balanced improvement in activity and durability of copper–based electrodes for formaldehyde oxidation.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Shan Huang,Lingyun Huang,Qi Zuo,Jian Liu,Jiushuai Deng
This study addresses the selectivity challenge in the flotation separation of fine cassiterite from calcium-containing gangue minerals, particularly calcite, by developing a Fe 3 + -CMC depressant system. Micro-flotation tests demonstrated that this system significantly improved separation efficiency: compared to using CMC alone, the SnO 2 recovery increased by 54.23–85.79 % (at a grade of 85.63 %), while the calcite recovery was depressed to 11.66 % (a reduction of 3.36 percentage points). The mechanism was systematically elucidated through contact angle measurements, solution chemistry calculations, surface characterization (Zeta potential, FTIR, XPS, AFM), and theoretical simulations (MD, DFT). The results indicate that Fe³ ⁺ mainly exists as Fe(OH)₃ in the pulp, which adsorbs on the cassiterite surface via hydroxyl groups and on the calcite surface through oxygen sites in CO₃²⁻. CMC consumes Fe³ ⁺ adsorbed on the cassiterite surface, while Fe³ ⁺ on the calcite surface provides additional adsorption sites for CMC, thereby enhancing its selective coverage. The stable Fe(OH)₃-CMC configuration promotes multilayer adsorption, effectively increasing cassiterite recovery while depressing calcite. This strategy, leveraging the synergistic effect of metal ion pretreatment and an organic depressant, offers a feasible approach for the efficient beneficiation of complex tin ores.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ENVIRONMENTAL MANAGEMENT
·
2026
·
IF 9.2
Yang Chen,Junyue Wang,Zikang Zhang,Zeming Wang,Youai Zhang,Yanzheng Gao,Chao Qin,Wanting Ling
Estradiol (E2), a natural endocrine disruptor, can be absorbed, accumulated, and metabolized by plants; however, it poses notable risks to the environment and reproductive health of humans and animals. The effects of E2 accumulation in soil used for cultivation remain poorly defined. In this study, we established a soil-based cultivation system to investigate the E2-accumulation dynamics, biochemical responses, and developmental changes in pak choi during its growth cycle. The accumulation of estrogens in roots was always higher than in shoots throughout the cultivation period. Estrone was the predominant accumulation form of the natural estrogens in plant tissues. However, microstructural analyses and antioxidant system indicators revealed irreversible plant damage, leading to compromised harvest quality despite food safety at maturity. Visible morphological traits reflect these differences in quality, enabling consumers to identify risk-free vegetables. Growth and oxidative defense are co-regulated across time and E2 levels, with plants gradually shifting from growth to defense strategies, a previously unrecognized adaptation to estrogen stress. Combining experimental monitoring with modeling, we quantified the E2-associated risks and assessed the risk quotient of total natural estrogens after E2 transformation. The intake risks of pak choi initially increased and subsequently declined, with the edible portion at harvest being risk-free (hazard quotient <1). This study provides the first evidence of the long-term effects of E2 on pak choi under natural soil conditions, offers key insights into the link between plant physiology and dietary risk, and supports the establishment of science-based thresholds for natural estrogens in crop production systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2026
·
IF 5.4
Yiqi Zheng,Ruxin Chen,Jianfeng Lan,Mingchao Zheng,Xiaoying Li,Tong Lou,Bo Wu,Xianhui Zhang,Jiangfan Chang,Zongcheng Yang,Xiaoyan He,Xiuqin Bai
Marine corrosion and biofouling represent significant threats to marine infrastructure. Multi-layer coating systems are inherently complex and suffer from susceptibility to interlayer failure. This study presents an integrated anti-corrosion and anti-fouling coating by modifying epoxy resin with urushiol-derivative. The derivative was synthesized by reacting hydride-terminated polydimethylsiloxane (HPDMS) with the unsaturated side chains of urushiol. Coatings with HPDMS contents of 0.2 wt% (UEP‑0.2), 0.4 wt% (UEP‑0.4), and 0.6 wt% (UEP‑0.6) were prepared and compared with unmodified UE. Characterization confirmed HPDMS incorporation, with surface silicon content reaching ∼20 wt% and a WCA> 100°, indicating high hydrophobicity and silicon enrichment. Mechanical tests showed that UEP‑0.4 achieved an optimal balance, with high toughness of 6.7 MJ/m 3 and adhesion strength of 10.1 MPa. EIS demonstrated the optimized anti-corrosion performance of UEP-0.4, exhibiting the highest |Z| 0.01 Hz with 7.75 × 10 9 Ω·cm 2 after 60 days of immersion. Under a flow of 1.5 m/s, UEP-0.4 exhibited a Navicula incerta adhesion ratio of 5.5 %, which is not only 34.2 % lower than that of UE but also represents a 68.8 % reduction compared to its performance under a flow of 0 m/s. UEP-0.4 demonstrates a synergistic combination of robust mechanical, anti-corrosion, and anti-fouling properties, providing a promising strategy for high-performance integrated coatings based on functionalized urushiol.
✓ 已验证
产品关联
DOI
高影响因子