INTERNATIONAL JOURNAL OF ENERGY RESEARCH
·
2020
·Vol. 45
·期 4
·5337-5346
·
IF 3.741
Chuangang Yao,Jixing Yang,Haixia Zhang,Sigeng Chen,Jian Meng,Kedi Cai
Summary Cu doped perovskites SrFe 0.9- x Cu x Mo 0.1 O 3- δ (SFCM, x = 0-0.2) are explored as cathodes for IT-SOFCs. The influence of Cu doping on the property of SFCM series was studied in detail. The oxygen content decreases with the increase of Cu doping amount. SFCM samples are chemically compatible with LSGM electrolyte. However, the TEC values are still a bit higher than that of some common SOFC electrolytes. At 750°C, the R p values are 0.261, 0.227 and 0.155 Ω·cm 2 for SFCM0, SFCM0.1, and SFCM0.2. The obtained activation energies for x = 0, 0.1, and 0.2 are 1.01, 0.98, and 0.87 eV, respectively. These results indicate that Cu doping into SrFe 0.9- x Cu x Mo 0.1 O 3- δ has a favorable effect on the electrochemical activity of the materials.
研究领域:
材料科学
·
电化学
·
能源材料
·
固体氧化物燃料电池
·
无机功能材料
✓ 已验证
DOI
高影响因子
POLYMER
·
2017
·
IF 3.684
Yanzhi Zhao,Juying Zhou,Fuhou Lei,Haitang Xu,Jianfang Lu,Zaiying Huang,Qin Huang,Pengfei Li
In this work, amphiphilic acrylicpimaric acid polyglycol ester (APAPG) was synthesized by steglich esterification method. The structure transformation and aggregation behaviors of APAPG in water were investigated by Rayleigh light scattering (RLS) technique in a heating and cooling cycle. For concentration above critical micelle concentration (CMC), a reversible transition from micelle to aggregation was observed. The structure transformation process involved irreversible aggregation and disaggregation processes at low temperature and a reversible aggregation process at high temperature when the concentration closed to CMC. Accordingly, the information about each structure transformation behavior in the concentration far below CMC during heating process including individual unimers, aggregation and disaggregation were thoroughly revealed. However, the structure transformation behavior is irreversible in the cooling process. The structure transformation and aggregation behaviors were assessed by dynamic light scattering (DLS), microcalorimetry and scanning electron microscopy (SEM) techniques. The results indicate that the RLS technique can provide detailed information about structural evolution at molecular level of polymer chains.
研究领域:
高分子化学
·
胶体与界面化学
·
药物递送系统
·
生物材料
·
纳米医学
✓ 已验证
DOI
高影响因子
CORROSION SCIENCE
·
2022
·
IF 7.72
Tianquan Liang,Zhihua Huang,Menghao Li,Wantong Xiao,Huan He,Aoping He,Xiyong Chen,Nengneng Luo
The thermochemical reaction behaviors between Y 2 O 3 and calcium-magnesium-aluminosilicate (CMAS) at 1250 °C∼1400 °C were investigated. A continuous-dense reaction layer mainly composed of Y-apatite phase quickly forms within 15 min, and its slow increasing thickness depends on the molten CMAS infiltration along the Y-apatite grain boundaries, the dissolution of the Y-apatite phase into the melt, the inhibiting effect on the CMAS penetration, and the reaction time and temperature. The CMAS crystallization occurs due to the change of chemical composition and the formation of other reaction products. The dense reaction layer shows good resistance to the molten CMAS infiltration.
研究领域:
材料科学
·
无机非金属材料
·
高温材料
·
陶瓷涂层
·
腐蚀与防护
✓ 已验证
DOI
高影响因子
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY
·
2022
·
IF 2.004
Chenyang Xu,Jianliang Zhang,Zhengjian Liu,Anjun Xu,Yaozu Wang,Liming Ma,Chuanhui Li
In order to study the change of each phase and the influence of single oxide during the consolidation of pellets. A systematic thermodynamic calculation was carried out through the phase diagram to study the influence of five oxides (CaO, SiO 2 , Fe 2 O 3 , Al 2 O 3 and MgO) on the phase equilibrium of the hematite pellet system. The results show that the content of CaO has the most significant effect on the content of liquid phase and SPINA. There are critical values for the influence of SiO 2 and CaO on the Ca 3 Fe 2 Si 3 O 12 phase, which are 3.5% and 3.0%, respectively. Through in-situ heating experiments, XRD-Rietveld and SEM-EDS, the macro morphology and phase composition of the hardened samples were compared and analyzed. Finally, a multiple regression model is used to predict the liquid content of hematite pellets, which is effective in predicting the phase component.
研究领域:
冶金工程
·
材料科学
·
物理化学
·
过程工程
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 112
·111052-111059
·
IF 3.289
Yuemei Li,Rui Wang,Yanling Xu,Jianjun Zhou,Zhihua Liu,Xiaojing Yan,Li Ma
ZnO:Yb3+,Tm3+,Ga3+ up-conversion nanoparticles (UCNPs) with sizes of between 20 and 65 nm are synthesized by the hydrothermal method. The size of the nanocrystals is affected by different Ga3+ concentrations. The variation in size has influence on the particles' visible blue and red up-conversion (UC) emission. In this paper, X-ray powder diffraction results show different amounts of gallium substituting for Zn in the ZnO lattice. When the concentration of Ga3+ is 3 mol%, the resulting UCNPs exhibit strong UC emission, longer fluorescence lifetime and narrower band gap. Due to their adjustable size and UC fluorescence properties, ZnO:Yb3+,Tm3+,Ga3+ nanocrystals have broad prospects for future applications in the biomedical field.
研究领域:
材料科学
·
纳米医学
·
生物光子学
·
无机功能材料
·
分子影像
✓ 已验证
DOI
高影响因子
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE
·
2018
·Vol. 215
·期 11
·1700905
·
IF 1.795
Shuping Deng,Decong Li,Liping Zheng,Yu Tang,Zhong Chen,Luqi Sun,Wenting Liu,Lanxian Shen,Shukang Deng
In this work, the effect of Cd and Sn atoms partly substitution for Zn on among crystal growth, thermal stability, mechanical, and electrical transport property in β-Zn 4 Sb 3 is reported. In a series of samples prepared from the atomic ratios of Zn:Sb:Cd:Sn = 4.4:3: x :3 ( x = 0.2, 0.4, 0.6, and 0.8). Carrier concentration of all samples varies from 4.52 × 10 19 to 6.42 × 10 19 cm −3 as carrier mobility changes from 58.27 to 67.93 cm 2 V −1 s −1 at room temperature. As a result, electrical transport properties of the samples are optimized by Cd Sn co-doped. The experimental density of all the samples varies from 6.26 × 10 3 to 6.34 × 10 3 kg m −3 consistent with the theoretical value. The weight loss and melting point of the sample are determined to discuss thermal stability in the heating process in air, indicating that the single crystals β-Zn 4 Sb 3 possess an excellent thermal stability and it is practical importance in the TE application at high temperature. Consequently, the maximal power factor of 1.70 × 10 −3 W m −1 K −2 is achieved at 540 K for the sample with initial Cd content x = 0.2, which is enhanced by 40% compared with the single-doping system in β-Zn 4 Sb 3 .
研究领域:
材料科学
·
热电材料
·
固体物理
·
无机化学
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Qing Cen,Qiaoyuan Gao,Chenlu Zhang,Yingqi Liu,Qi Wang,Qi Wang
In this study, visible-light-active iron tungstosilicate (FeSiW) was fabricated via solvothermal method . Fe 3+ was applied as counter ion to precipitate with silicotungstic acid (H 4 SiW 12 O 40 ) in methanol solution. It can be observed from FT-IR spectra that the Keggin structure of SiW 12 O 40 4− was well maintained in FeSiW. Besides, the effect of different initial molar ratios of Fe 3+ to H 4 SiW 12 O 40 was investigated (from 4:1 to 4:4). By photoelectrochemical characterizations, such as photocurrent response and Mott-Schottky (M-S) plots, easiest generation of electron-hole pairs and lowest charge transfer resistance can be observed on FeSiW with initial molar ratio of 4:3. Moreover, FeSiW with 4:3 ratio also displayed highest activity for photocatalytic reduction of Cr(VI), despite of the largest band gap (ca. 2.71 eV). The lowest unoccupied molecular orbital (LUMO) and highest occupied molecular orbital (HOMO) of the optimized FeSiW were estimated to be +0.03 V and 2.74 V vs NHE, respectively, which were thermodynamically feasible for Cr(VI) reduction and H 2 O oxidation . Even under acidic condition (pH 3), the optimized photocatalyst displayed good stability in cyclic runs. Therefore, the present study opens a new way for heterogeneous polyoxometalates as efficient photocatalyst for environmental application.
研究领域:
环境化学
·
材料科学
·
光催化
·
无机化学
·
污染治理
✓ 已验证
DOI
高影响因子
Materials Today Chemistry
·
2022
·
IF 7.613
J. Du,S. Lyu,K. Jiang,D. Huang,J. Li,R. Van Deun,D. Poelman,H. Lin
Persistent luminescent materials containing deep-level traps have attracted extensive research interest in the field of optical information storage due to their unique features of long-lasting emission, energy storage, and controllable photon release upon external stimulations. However, the lack of suitable luminescent materials with deep-level traps is still the bottleneck of such an optical storage application. Herein, we report a series of persistent luminescent materials with reddish-orange emissions and controllable photon release upon thermal stimulation. Through substitution of Sn by Si, more and deeper trap levels are achieved in Sr 2 SnO 4 :Sm 3+ ,Si 4+ phosphors. Moreover, both ultraviolet light and high-energy X-ray irradiations can induce reddish-orange emitting persistent luminescence from the as-synthesized samples. Rewritable optical information storage and readout based on photon trapping and de-trapping processes are demonstrated. Optical information can be handily encoded using a commercially available 365 nm light-emitting diode, and decoded upon thermal stimulation. The Sr 2 SnO 4 :Sm 3+ ,Si 4+ phosphors as presented in this work show a great promise for rewritable optical data storage and information encryption.
研究领域:
材料科学
·
光功能材料
·
固态化学
·
信息存储技术
·
发光物理
✓ 已验证
DOI
高影响因子
JOURNAL OF CHEMICAL THERMODYNAMICS
·
2011
·
IF 2.794
Yuanchao Pei,Jing Liu,Zhenning Yan,Zhiyong Li,Jing Fan,Jianji Wang
In this paper, the interactions between cationic dyes and the ionic liquids (ILs) have been studied by 31 P nuclear magnetic resonance (NMR), UV–Vis spectroscopy and conductometric measurements at different temperatures. It was shown that a decrease in the measured specific conductance of the (dye + IL) mixtures was caused by the formation of non-conducting or less conducting (dye + IL) associates. The associates were formed by 1:1 ratio of cation of the cationic dyes and anion of the ILs by using the 31 P NMR and UV–Vis spectroscopy methods. The association constants were calculated by theoretical model based on the deviation from linear behavior, and the association constants were as high as 10 6 (L · mol −1 ) 2 . Thermodynamic results imply that the formation process of association was exothermic nature. It is expected that the associates reported here would have promising application as active materials for the preparation of ion-selective electrode used in the determination of ILs concentrations.
研究领域:
物理化学
·
分析化学
·
胶体与界面化学
·
药物化学
·
分子生物学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 107
·105755-105760
·
IF 3.289
Xiaokai Li,Yangyang Xu,Xiaojian Mao,Qiangqiang Zhu,Minghui Feng,Benxue Jiang,Long Zhang
A modified vibrating screen method was employed to prepare granulated Y2O3 powders, which were used to fabricate transparent ceramics. The granulation process was carried out with yttrium-stabilized zirconia balls (5 mm in diameter) in a 200-mesh screen, which was vibrated by a Heidolph shaker. After passage through the vibrating screen, the sub-micron Y2O3 particles were converted into large granules and collected in the bottom chamber of the sieve. Compared with the original powders, the granulated powders had a smaller repose angle of 34.09° and larger apparent and tap densities with sharp rises of 50.54 and 32.07%, respectively, indicating a good flowability and filling properties. A high transmittance of 82% at 2500 nm was achieved for ceramics prepared using the granulated powders by vacuum sintering and hot isostatic pressing (HIP).
研究领域:
材料科学
·
无机非金属材料
·
陶瓷学
·
粉末冶金
·
光学材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·Vol. 50
·期 14
·24995-25004
·
IF 5.1
Zhiyi Li,Haili Sun,Wei Wei,Fengxia Liu,Xiaofei Xu,Zhijun Liu
The emerging market of high-power lithium-ion batteries (LIBs) highlights the importance of developing high-voltage cathodes. Lithium nickel phosphate (LiNiPO 4 ) with the highest theoretical discharge potential (∼5.1V) has attracted increasing attention due to its stable olivine structure. In this study, ultrathin carbon layer-coated LiNiPO 4 was synthesized using oleylamine-assisted solvothermal method under different solvothermal times, and the effect of solvothermal time (1h–18h) on LiNiPO 4 samples is fully investigated. X-ray diffraction (XRD) shows that high-purity LiNiPO 4 materials can be prepared after calcination of the solvothermal product under N 2 , but adding part of H 2 to the calcination atmosphere will lead to the generation of impurities in the target product. As the solvothermal time increases, the product will agglomerate and grow, the particle size will increase, and the morphology will change from nanoparticle to rodlike structure. After the high-temperature calcination step, the oleylamine is completely carbonized, and a conductive carbon layer is successfully coated on the LiNiPO 4 with the thickness of 2 nm. As the solvothermal time increases, the graphitization degree of oleylamine increases after carbonization. The existence of the carbon layer and the increase in the degree of graphitization are beneficial to improving the electrical conductivity and Li-ion diffusion rate of LiNiPO 4 . The initial discharge capacity of LNP@C-12h product prepared with 12 h solvothermal time is 35 mA h g −1 at 0.1 C. Rietveld analysis shows that the anti-site defect concentration of the LNP@C material is 1.07 %, and the proportion increases to 2.83 % after several cycles. This work provides a positive contribution to the synthesis and modification of high-voltage LiNiPO 4 materials and explains the electrochemical performance degradation of LiNiPO 4 from the perspective of increasing the concentration of anti-site defects.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
锂离子电池
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Xibao Zhang,Yonghui Xu,Xiudi Wu,Shuwen Yin,Chuansheng Zhong,Chenxue Wang,Liang Zhou,Hongpeng You
A series of novel Bi 3+ /Ln 3+ -activated Ca 2 ScSbO 6 (CSSO) phosphors were synthesized by solid-state method and their luminescent behaviors were investigated in detail. Under the 302 nm excitation, the CSSO:Bi 3+ shows remarkable near-ultraviolet photoluminescence with a peak emission at 365 nm. Eu 3+ -activated CSSO phosphor possesses high efficiency and no obvious reduction of emission intensity even after replacing Sc with Eu completely, which indicates a low-concentration quenching effect. In addition, its emission intensity at 423 K (I 423K ) still maintains 88 % compared with that of at room temperature (I 298K ), indicating good thermostability. In contrast, the CSSO:Bi 3+ phosphor exhibits a significant reduction in emission intensity, maintaining only 49 % of its luminescence at 423 K (I 423K /I 298K ). By codoping Bi 3+ and Ln 3+ (Ln = Eu, Tb, Dy, Sm), the energy transfer was observed from the Bi 3+ to Ln 3+ ions, endowing the CSSO:Bi 3+ , Ln 3+ phosphors with tunable multicolor emissions. Leveraging the differing thermostabilities of the emission spectra for Bi 3+ and Ln 3+ ions, we designed and assessed a range of sensitive optical thermometers. Among these, the CSSO:Bi 3+ , Eu 3+ phosphors exhibited the best performance, boasting maximum absolute and relative sensitivities of 9.96 % K −1 and 2.002 % K −1 , respectively. Additionally, we displayed the multi-mode anti-counterfeiting function of synthesized phosphors, and a multi-color switching system was designed with the advantages of direct visualization and easy identification of encrypted information. These results indicate that Bi 3+ and Ln 3+ coactivated CSSO phosphor has the potential application for non-contact temperature measurement and anti-counterfeiting.
研究领域:
材料科学
·
光学工程
·
无机化学
·
功能材料
·
传感器技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）