文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3493至3504个,产品总数6,196个

切换升序
1
Nature Communications · 2023 ·Vol. 14 ·期 1 ·1-10 · IF 16.6

One-stone-for-two-birds strategy to attain beyond 25% perovskite solar cells

Yang Tinghuan,Gao Lili,Lu Jing,Ma Chuang,Du Yachao,Wang Peijun,Ding Zicheng,Wang Shiqiang,Xu Peng,Liu Dongle,Li Haojin,Chang Xiaoming,Fang Junjie,Tian Wenming,Yang Yingguo,Liu Shengzhong (Frank),Zhao Kui

Even though the perovskite solar cell has been so popular for its skyrocketing power conversion efficiency, its further development is still roadblocked by its overall performance, in particular long-term stability, large-area fabrication and stable module efficiency. In essence, the soft component and ionic–electronic nature of metal halide perovskites usually chaperonage large number of anion vacancy defects that act as recombination centers to decrease both the photovoltaic efficiency and operational stability. Herein, we report a one-stone-for-two-birds strategy in which both anion-fixation and associated undercoordinated-Pb passivation are in situ achieved during crystallization by using a single amidino-based ligand, namely 3-amidinopyridine, for metal-halide perovskite to overcome above challenges. The resultant devices attain a power conversion efficiency as high as 25.3% (certified at 24.8%) with substantially improved stability. Moreover, the device without encapsulation retained 92% of its initial efficiency after 5000 h exposure in ambient and the device with encapsulation retained 95% of its initial efficiency after >500 h working at the maximum power point under continuous light irradiation in ambient. It is expected this one-stone-for-two-birds strategy will benefit large-area fabrication that desires for simplicity.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Science China-Materials · 2023 ·Vol. 66 ·期 6 ·2274-2282 · IF 8.1

Enhanced electron density of the π-conjugated structure and in-plane charge transport to boost photocatalytic H2 evolution of g-C3N4

Zhang Yang,Cao Ning,Liu Xiaoming,He Fengting,Zheng Bin,Zhao Chaocheng,Wang Yongqiang

Graphite carbon nitride (g-C 3 N 4 ) has become an emerging metal-free photocatalyst and attracted the attention of researchers. However, pure g-C 3 N 4 (PCN) prepared by traditional thermal condensation polymerization has a low polymerization of heptazine ring chains and a large number of charge recombination centers, which hinder in-plane charge transport, leading to undesirable photocatalytic performance. Herein, PCN fabrication by thermal treatment with ammonium oxalate monohydrate was performed to produce highly dispersed porous g-C 3 N 4 nanosheets, and the integrity of their in-plane heptazine ring chains was successfully improved without introducing heteroatoms. Electron paramagnetic resonance and 13 C nuclear magnetic resonance analyses revealed significantly increased electron density and delocalization of the π-conjugated structure. The obtained samples exhibited acceptable stability and photocatalytic activity, and the hydrogen reduction rates without and with the Pt co-catalyst were 11.2 and 5.3 times that of PCN.

CAS / MDL: 60-54-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICAL AND BIOANALYTICAL CHEMISTRY · 2023 ·Vol. 415 ·期 18 ·4401-4410 · IF 4.3

Smartphone-based hand-held polarized light microscope for on-site pharmaceutical crystallinity characterization

Yuan Kaisong,Huang Rui,Gong Kaishuo,Xiao Ziyi,Chen Jialin,Cai Siyao,Shen Jiayi,Xiong Zuer,Lin Zhexuan

Polarized light microscopy (PLM) is a common but critical method for pharmaceutical crystallinity characterization, which has been widely introduced for research purposes or drug testing and is recommended by many pharmacopeias around the world. To date, crystallinity characterization of pharmaceutical solids is restricted to laboratories due to the relatively bulky design of the conventional PLM system, while little attention has been paid to on-site, portable, and low-cost applications. Herein, we developed a smartphone-based polarized microscope with an ultra-miniaturization design (“hand-held” scale) for these purposes. The compact system consists of an optical lens, two polarizers, and a tailor-made platform to hold the smartphone. Analytical performance parameters including resolution, imaging quality of interference color, and imaging reproducibility were measured. In a first approach, we illustrated the suitability of the device for pharmaceutical crystallinity characterization and obtained high-quality birefringence images comparable to a conventional PLM system, and we also showed the great promise of the device for on-site characterization with high flexibility. In a second approach, we employed the device as a proof of concept for a wider application ranging from liquid crystal to environmental pollutants or tissues from plants. As such, this smartphone-based hand-held polarized light microscope shows great potential in helping pharmacists both for research purposes and on-site drug testing, not to mention its broad application prospects in many other fields. Graphical Abstract

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Food Measurement and Characterization · 2022 ·Vol. 17 ·期 2 ·1662-1670 · IF 3.006

Bimetallic metal–organic framework derived Mn, N co-doped Co-Carbon for electrochemical detection of nitrite

Yang Zhengfei,Zhang Weijia,Zhu Jiangyu,Yin Yongqi,Xue Huaiguo,Fang Weiming

Detection and control of nitrite are major concerns in recent years for ensuring food and environmental safety. In this study, Mn, N co-doped Co-Carbons (CoMnN-Cs) were synthesized by calcination of bimetallic Co-Mn zeolite-imidazolate framework (CoMnZIF-67) materials at different temperatures (600–900 °C) in nitrogen atmosphere. Many characterizations, such as scanning electron microscope (SEM), elemental mapping, and, N 2 adsorption–desorption were performed to analyze the morphology, structure, and composition of the CoMnN-Cs. SEM revealed the generation of rich carbon nanotubes (CNTs). Mn-doping was obtained, which could be seen from the elemental mapping. The characterization also revealed that the pyrolysis temperature has an important effect to catalytic activities. From obtained results, it was found that the CoMnN-Cs prepared at 800 °C (CoMnN-Cs-800), showed better detection performance compared with CoMnN-Cs developed at other temperatures. As a result, the CoMnN-Cs-800-based sensor manifested an extended linear range (from 0.2 to 7000 μM), a low detection limit of 0.16 μM, and high sensitivity. Meanwhile, the developed sensor exhibited good selectivity, reproducibility, and long-term stability. Moreover, the sensor achieved satisfactory recoveries for the quantification of nitrite in tap water and sausage samples. This study implies CoMnN-Cs-800 is a promising material for the measurement of nitrite. Graphical abstract

CAS / MDL: 693-98-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHROMATOGRAPHIA · 2022 ·Vol. 86 ·期 1 ·55-62 · IF 2.213

Enantiomeric Resolution of Pidotimod and Its Isomers in Pidotimod Oral Solutions Using Chiral RP-HPLC with Quadrupole Dalton Analyzer Detection

Zhang Caiyu,Li Wei,Ning Baoming

This study aimed to develop and validate a high-performance liquid chromatography system combined with a single-quadrupole Dalton mass detector for the separation and determination of pidotimod (( R )-3-[( S )-(5-oxo-2-pyrrolidinyl)carbonyl]-thiazolidine-4-carboxylic acid) and its three isomers. The separations were achieved using a Lux Amylose-1 column operated at 40 °C using acetonitrile/0.1% trifluoroacetate (TFA) and isopropanol/0.1% TFA (90:10, v / v ). The enantiorecognition mechanism was also elucidated using the ORCA 5 program. Four isomers were successfully separated with a resolution (Rs) > 1.5, with the method showing satisfactory linearity in the ranges of 0.2 to 3.5 μg·mL −1 ( S,R; S,S ) and 0.5 to 3.5 μg·mL −1 ( R,S; R,R ), along with good specificity, accuracy, and precision. Further, three batches of pidotimod oral solutions were evaluated and the S,S -isomer in each batch was detected at about 0.05%. Moreover, computational evaluations suggested that the sorbent-analyte interactions of amylose tris(3,5-dimethylphenycarbamate) can be used to successfully interpret and even predict the chromatographic separation results. The validated method showed high sensitivity and can potentially be used to analyze the isomer impurities of raw materials for quality control purposes.

CAS / MDL: 76-05-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CELLULOSE · 2022 ·Vol. 30 ·期 3 ·1623-1636 · IF 6.123

Dye adsorption performance of nanocellulose beads with different carboxyl group content

Xue Jianghua,Zhu Enwen,Zhu Hengfeng,Liu Dongning,Cai Haopeng,Xiong Chuanxi,Yang Quanling,Shi Zhuqun

The problems caused by water pollution are increasingly serious, wastewater contains a lot of heavy metal ions, textile dyes, medicines, etc. However, most adsorption materials usually face problems such as inefficient recycling, high cost, and secondary pollution. As a natural polymer, cellulose has low cost, degradability and good biocompatibility. In this work, by changing the addition amount of sodium hypochlorite during 2,2,6,6-Tetramethylpiperidine-1-oxyl radical (TEMPO) oxidation, nanocellulose with different carboxyl content could be prepared, which is expected to be a good high-efficiency cationic adsorbent due to its rich in hydroxyl groups on the surface and negatively charged. Then the calcium chloride solution was used as the cross-linking agent to prepare TEMPO-oxidized cellulose nanofibril beads (TOCNB) by the dropping solidification method. As the content of carboxyl groups increases, the Zeta potential value of the nanocellulose dispersion became increasingly negative. The nanocellulose beads all presented a good three-dimensional network porous structure. With the increase of carboxyl group content, the specific surface area increases from 173 to 367 m 2 g −1 , and the adsorption capacity for methylene blue (MB) also gradually strengthened. The saturated adsorption capacity of TOCNB on MB was calculated as high as 925.93 mg g −1 . The nanocellulose bead was a cationic adsorbent with highly efficient adsorption and adjustable specific surface area, and the preparation method was simple, fast, efficient and green.

CAS / MDL: 7681-52-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHIMICA ACTA · 2022 ·Vol. 190 ·期 1 ·1-12 · IF 6.408

2D Co3O4 modified by IrO2 nanozyme for convenient detection of aqueous Fe2+ and intercellular H2O2

Yan Zhengquan,Zheng Xiaoyu,Meng Guoqing,Tang Yulian,Zhou Xuemei,Hao Junkai,Feng Jing,Lin Naibo,Hu Lei

A portable sensor for visual monitoring of Fe 2+ and H 2 O 2 , two-dimensional Co 3 O 4 modified by nano-IrO 2 (IrO 2 @2D Co 3 O 4 ) was prepared in this work, for the first time, with the help of microwave radiation at 140 °C, which was further stabilized onto common test strips. The present IrO 2 @2D Co 3 O 4 possessed superior dual-function enzyme-like activity with low toxicity and excellent biocompatibility. Especially, trace Fe 2+ and H 2 O 2 could exclusively alter their enzyme-like catalytic activity with discriminating hyperchromic or hypochromic effect, i.e., from blue to colorless or to dark blue for both IrO 2 @2D Co 3 O 4 dispersion and its functionalized test strips. The linear regression equations were A 652  = 0.5940 − 0.00041 c Fe 2+ (10 −8  M, R 2  = 0.9927) for Fe 2+ and ∆A 652  = 0.0023 c H2O2  + 0.00025 (10 −7  M, R 2  = 0.9982) for H 2 O 2 , respectively. When applied to visual monitoring of aqueous Fe 2+ and intercellular H 2 O 2 , the recoveries were 101.2 ~ 102.5% and 95.8 ~ 103.7% with detection limits of 1.25 × 10 −8  mol/L and 1.02 × 10 −7  mol/L, respectively, far below the permitted values in drinking water set by the World Health Organization. The mechanisms for the enhancing enzyme-mimetic activity of IrO 2 @2D Co 3 O 4 and its selective responses to Fe 2+ and H 2 O 2 were investigated in detail. Graphical Abstract

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF POROUS MATERIALS · 2022 ·Vol. 30 ·期 3 ·989-997 · IF 2.523

Micron down feather fibers reinforced cellulose composite aerogel with excellent acoustic and thermal insulation

Sun Weihao,Fang Yinchun,Wu Lingshuang,Liu Xinhua

Cellulose aerogel as the third generation of aerogel materials has become a hotspot. However, the poor mechanical property and dimensional stability of cellulose aerogel restrict its application. In this study, the micron down feather fibers (DFF) was used as the reinforcing material to prepare the cellulose composite aerogels by dispersion DFF in the carboxymethyl cellulose (CMC) matrix. The prepared CMC/DFF composite aerogel with low density (0.0389–0.0428 g/cm 3 ) and high porosity (about 97%). The effects of down fiber mass fraction on the mechanical and insulation properties of cellulose composite aerogel were studied. The addition of down feather fibers in the CMC aerogels could improve the mechanical property by increasing the compressive stresses at the 80% compressive strain about 75%. The CMC/DFF composite aerogels also could obtain excellent acoustic and thermal insulation properties with the sound absorption coefficient of 0.991 and thermal conductive of 0.06012 W/mK. The reinforcing mechanism of down fiber on cellulose aerogel was studied. The improvement of mechanical property of CMC aerogels by down feather fibers was due to the physical reinforcement by broadening the layers space of composite aerogels and the chemical reinforcement by forming the cross-linking system with CMC matrix and DFF through glutaraldehyde. Therefore, this research provides a novel strategy for preparation of cellulose composite aerogels with excellent acoustic and thermal insulation, and reinforced mechanical property by using the waste bio-based micron down feather fibers.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
International Journal of Minerals Metallurgy and Materials · 2023 ·Vol. 30 ·期 3 ·548-558 · IF 4.8

Fabrication of a flexible microwave absorber sheet based on a composite filler with fly ash as the core filled silicone rubber

Li Qiuying,Lu Yiheng,Shao Zhuoyan

A new type of composite filler was designed by a modified sol—gel method using fly ash (FA), Fe(NO 3 ) 3 ·9H 2 O, and Ni(NO 3 ) 2 ·6H 2 O as raw materials. The composite filler was a spherical core-shell structure composed of FA as the core and NiFe 2 O 4 as the shell. Further, the composite filler was added into the silicone rubber to fabricate the high temperature vulcanized microwave absorption materials; X-ray diffraction, fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscope confirmed that NiFe 2 O 4 was successfully coated on the surface of FA and formed a uniform and continuous coating layer. As expected, silicone rubber filled with the composite filler had a minimum reflection loss of −23.8 dB at 17.5 GHz with the thickness of 1.8 mm, while the effective absorption bandwidth was as high as 12 GHz. The addition of the composite filler greatly enhanced the microwave absorption properties of the system, which was resulted from multiple losses mechanism: interface polarization losses, magnetic losses, and multiple reflection losses. Also, silicone rubber filled with the composite filler exhibited excellent thermal stability, flexibility, environmental resistance, and hydrophobicity compared with traditional silicone rubber. Therefore, this work not only responds to the green chemistry to achieve efficient FA recovery, but also devises a new strategy to prepare microwave absorption materials with strong potential for civilian applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF SOLID STATE ELECTROCHEMISTRY · 2022 ·Vol. 27 ·期 3 ·679-694 · IF 2.747

Electroplated wear and corrosion–resistant Co-Mo/CeO2 composite coatings for reducing mold fouling application

Tai Xiaoming,Liu Cansen,Chen Wanlin,Mai Yongjin,Zhang Liuyan,Wu Xinghua,Jie Xiaohua

Rubber tires, as an important part of automobiles, are produced by molding operation under molten temperature and high pressure. However, mold fouling during the vulcanization process is a rock-ribbed problem that not only leads to the loss in productivity and degradation of product quality but also results in severe accidents and enormous economic losses. In this work, a promising Co-Mo/CeO 2 composite coating was electroplated and investigated to solve the mold fouling problem. The effect of CeO 2 content on the surface morphology, microstructure, hardness, tribological and electrochemical behavior is systematically studied. With an addition of 10 g/L CeO 2 , the Co-Mo/CeO 2 composite coating not only possesses the highest microhardness, the best wear and corrosion resistance but also features hydrophobicity and remarkable mold antifouling performance. This study offers a new strategy for producing composite coatings with excellent performance to reduce mold fouling in practical tire industry applications. Graphical Abstract Co-Mo/CeO 2 composite coatings with excellent corrosion and wear resistance as well as low surface energy were simply electrodeposited and applicated for antifouling in tire mold for the first time.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOM · 2022 ·Vol. 75 ·期 5 ·1515-1529 · IF 2.597

Distribution Behaviors of As, Sb, Bi, Sn, Se, Te, Au and Ag Between Cu and Liquid Metal Phases in the Cu-Pb Binary System at 500–1080°C

Ge Yang,Liu Zhihong,Yu Zhiqian,Wang Huanwen,Lu Xingwu,Zhang Leru,Xia Longgong

The present study focused on the Cu-Pb system and investigating the distribution behaviors of various minor elements through the equilibration-quenching-EPMA analysis experimental technique. Obtained results showed that: (1) An intermetallic compound consisting mainly of Cu-Pb-Se-Te formed below 956°C. (2) As, Sb and Sn had similar distribution behaviors, which mainly entered the solid Cu phase at the temperature range of 500–900°C, but became concentrated in the liquid alloy phase at temperature range of 900–1060°C, and their distribution ratios increased along with increasing temperature. (3) Bi was mainly found in the liquid alloy phase, and its distribution ratio ranged from 6.8 to 836.5 at the experimental conditions. (4) Se and Te formed an intermetallic alloy phase under 900°C, and they enriched in the liquid alloy phase between 960°C and 1060°C. (5) Au was mainly found in the solid Cu phase at the temperature range of 500–900°C, and its distribution ratio was about 1.5 at 900–1060°C. The distribution ratio of Ag decreased from 8.7 to 2.3 when increasing the temperature from 500°C to 1060°C. Distribution behavior of As, Sb, Bi and Sn is consistent with their interfacial enthalpies with Cu and Pb.

CAS / MDL: 7440-50-8 7439-92-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED BIOCHEMISTRY AND BIOTECHNOLOGY · 2022 ·Vol. 195 ·期 5 ·3109-3121 · IF 3.094

Nickel-Doped Microfluidic Chip for Rapid and Efficient Immunomagnetic Separation and Detection of Breast Cancer Cell-Derived Exosomes

Fang Huiying,Liu Mei,Jiang Wei

Breast cancer cell-derived exosomes have high potential as biomarkers for continuous biopsies and longitudinal monitoring in breast cancer. However, it is extremely difficult to separate exosomes with high recovery and high purity from complex media, such as urine, plasma, saliva and cell culture supernatants. Here, we designed a flexible and simple microfluidic chip for exosome separation. The capture zone of the chip is a three-dimensional structure of interlaced cylinders doped with nickel powder. Exosomes were separated from cell culture supernatant by the immunomagnetic separation method in continuous flow mode and were detected by fluorescence imaging with high sensitivity. The chip achieved a high exosome recovery rate (> 74%) and purity (> 67%) at an injection rate of 3.6 mL/h. Thus, this chip was demonstrated to be a cutting-edge platform for the separation and detection of exosomes. It could also be applied to separate and detect other types of exosomes, microbubbles and cells.

CAS / MDL: 7440-02-0 70131-67-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。