文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3541至3552个,产品总数347,550个

切换升序
CHEMICAL ENGINEERING JOURNAL · 2026 · IF 12.5

Robust UV-curable triboelectric supramolecular eutectogels for self-powered soft electronics enabled by lignin-based photoinitiators

Tong Luo,Chuanwei Lu,Chunpeng Wang,Tongqi Yuan,Fuxiang Chu,Jifu Wang

Eutectogels hold considerable promise soft electrodes for high-performance flexible triboelectric nanogenerator (TENG) due to their tunable mechanical properties and environmental stability. However, conventional eutectogels with single linear polymer chains often exhibit poor mechanical strength as well as undesirable migration of components (e.g., initiators), which compromise device stability and limit their environmental adaptability in high-performance energy harvesting. Here, lignin was molecularly engineered into branched lignin nanospheres (BLNS) functionalized with polymerizable acrylate groups. In a deep eutectic solvent system, BLNS simultaneously enabled rapid self-initiated UV polymerization (97.3% C C conversion) and constructed a robust, non-migrating crosslinked network, yielding triboelectric supramolecular eutectogels (SEG). Specifically, benefiting from branched backbone and nanoreinforcing effect of the BLNS, the resulting SEG achieved exceptional mechanical robustness (tensile strength of 1.76 MPa, toughness of 5.10 MJ/m 3 ) and strong adhesion (1.21 MPa). The SEG-based sensor exhibited a high ionic conductivity of 4.50 mS m −1 and a gauge factor of 3.3, while maintaining stable sensing performance over a wide temperature range (−30 to 80 °C) and under varying humidity conditions (30–90% RH), demonstrating excellent adaptability to harsh environmental conditions. As a proof-of-concept, a TENG was constructed using the SEG as the flexible electrode, with open-circuit voltage remaining stable over 6000 contact–separation cycles, underscoring the robustness and operational stability essential for reliable self-powered soft electronic systems. This work establishes a versatile strategy for designing multifunctional lignin-based materials for next-generation self-powered electronics.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING SCIENCE · 2026 · IF 5.1

Tri-synergistic design of Pd-Ni/TiO2-Al2O3 porous catalysts for selective and stable hydrogenation of nitrile butadiene rubber

Xuehan Gao,Weifeng Zhi,Dongmei Huang,Wenyu Pan,Xinhang Ma,Liyi Pan,Zequan Li,Shuangliang Zhao

Hydrogenated nitrile butadiene rubber (HNBR) is a crucial material for high-performance sealing applications; however, conventional solution hydrogenation is often limited by high noble-metal consumption and the challenges in simultaneously achieving high activity, selectivity and stability. Herein, a synergistic design strategy integrating mass transfer enhancement, bimetallic electronic synergy, and support interface stabilization is proposed for efficient NBR hydrogenation. A Pd-Ni bimetallic-doped TiO 2 -Al 2 O 3 porous composite catalyst was synthesized through a sol–gel method, in which the pore size distribution was tuned to 15–18 nm by using an F127 template to facilitate macromolecular diffusion. Partial substitution of Pd with Ni modulates the electronic structure of Pd sites, promoting H 2 dissociation and selective C=C bond hydrogenation, while the TiO 2 -Al 2 O 3 composite support provides Lewis acid–base sites and oxygen vacancies that enhance metal dispersion and catalyst stability. The optimized Pd–1Ni catalyst achieves a hydrogenation degree of 92% at 120 °C and 4 MPa, and retains over 80% of its activity after five consecutive cycles. This work demonstrates an effective strategy for balancing catalytic activity, noble-metal utilization, and operational stability in heterogeneous NBR hydrogenation systems, providing a practical reference for catalyst design in polymer hydrogenation processes.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Energy & Environmental Science · 2026 · IF 30.5

Reductive electron redistribution enables ultrafast charging in magnesium batteries

Wenbin Wang,Hongyu Zhang,Miao Guo,Chaoqun Li,Xian Zhou,Guanglin Xia,Xuebin Yu

Solvation sheath rearrangement is recognized as a key strategy for modifying electrolytes to enhance the kinetics of magnesium batteries. However, its fundamental mechanism diverges significantly from that in Li-ion batteries and remains inadequately understood. Herein, we elucidate the principle that solvation tuning essentially determines the distribution of reductive electrons, whose accumulation on ether molecules directly leads to challenging reorganization and severe solvent decomposition. To address this, a series of organic monoamine salts are designed as additives to capture and stabilize the reductive electrons in the solvation sheath, and screening guidelines are proposed to promote the kinetics and reversibility of Mg plating/stripping. Accordingly, we demonstrate an Mg pouch cell with ultrahigh power density (50C, 13 mA cm−2, 16.02 kW kg−1 based on the cathode), surpassing the power densities reported in all previous studies. This work offers new insights into solvation tuning strategies that are crucial in designing high-power-density Mg batteries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2026 · IF 8.7

Self-assembly membrane of chitosan anchoring quinolince-2-one-3-carbaldehyde dihydrorhodizidine for highly effective adsorption of copper ion: experimental and theoretical study

Zengchen Liu,Wenping Zhu,Ruilan Liu,Hongyu Chen,Yahong Chen,Yaling Zhao,Yanxia Li,Baodui Wang

Copper is one transition metal element, which plays important roles in nature and living organisms. Especially, when copper in the industrial process is released into biological chain, it can pose heavy metal pollution and seriously endangers human health. Recently, membrane materials for adsorbing Cu 2+ have received sufficient attention and made encouraging progress. However, due to the interference from some coexisting ions like Pb 2+ , Cd 2+ , Co 2+ , et al., how to achieve selective and efficient Cu 2+ adsorption holds certain research value. Herein, we synthesize a novel organic molecule based on quinolince-2-one-3-carbaldehyde dihydrorhodizidine (QDO), which contains active hydrogen atoms and heteroatoms. According to self-assembly interaction with important biological carrier chitosan, an adsorption membrane containing a large number of nano particles is constructed. By taking advantage of the rapid Cu 2+ binding property of organic molecules, the membrane can efficiently and quickly adsorb Cu 2+ in water solution. At pH = 6.5, the adsorption reaches equilibrium state within 150 min, and according to following the thermodynamics and kinetics model, maximum adsorption capacities of 214.4763 mg/g for Cu 2+ are confirmed. We conclude the adsorption process is primarily governed by homogeneous chemisorption. The absorption membrane provides potentially promising prospects for highly selective and effective Cu 2+ treatment.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2026 · IF 9.1

Fabrication of recyclable Pd@NH2-MIL-101/AOPIM-1 beads for sustainable catalytic water remediation

Ruiying Xie,Feng Zhang,Guishan Hu,Mengzhen Chen,Huixian Wang,Xiaoquan Feng,Xuerui Wang,Yatao Zhang,Meixia Shan

The widespread presence of toxic nitroaromatic compounds in industrial effluents demands advanced remediation strategies. Catalytic reduction is highly effective, while the practical application of powdered catalysts is limited by challenges in recovery and reuse. To overcome this issue, macroscopic Pd@NH 2 -MIL-101/AOPIM-1 porous composite beads were fabricated via a phase inversion method, combining the high surface area of NH 2 -MIL-101 with the excellent processability of amidoxime-functionalized polymers of intrinsic microporosity (AOPIM-1). The incorporation of NH 2 -MIL-101 enriches the composite with amino functional groups, thereby enhancing the adsorption and local enrichment of reactants. Furthermore, these nitrogen-rich sites provide robust anchoring points for the uniform dispersion of Pd nanoparticles, collectively boosting catalytic activity and structural stability. The beads exhibited outstanding catalytic activity for the reduction of nitroaromatics, achieving 99% conversion of 4-nitrophenol (4-NP) within 5 min. The catalyst also maintained excellent structural stability over multiple cycles and allowed easy separation. Furthermore, the catalyst exhibited over 90% efficiency in the reduction of other common nitroaromatic pollutants, underscoring its versatility and applicability in wastewater treatment. This work provides a sustainable and practical solution for wastewater treatment by transforming hazardous contaminants into valuable aromatic amines using an easily separable catalytic system.

CAS / MDL: 16940-66-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2026 · IF 10.4

Dual-signal cross-validation via ECL quenching and DPV oxidation on a MIP sensor: ultrasensitive detection of sulfadiazine in complex food matrices with a CD-COF core

Xuran Zhang,Rongxian Ma,Zhili Li,Jing Cao,Haoqi Ma,Yeyu Wu,Xuecai Tan,Kejing Huang

The excessive use of sulfadiazine (SDZ) poses significant health risks due to toxic residues in food and ecosystems. This work introduces a novel molecularly imprinted polymer (MIP) sensor featuring a carbon dot-based covalent organic framework (CD-COF) core as a high-performance electrochemiluminescence (ECL) emitter. Upon SDZ rebinding to imprinted sites, the sensor leverages SDZ's inherent redox activity to enable complementary differential pulse voltammetry (DPV) detection alongside ECL quenching. This dual-signal output establishes an intrinsic cross-validation mechanism that inherently corrects environmental interferences. The sensor achieves ultrasensitive detection of SDZ, with impressively low detection limits of 0.28 nM (ECL) and 1.6 nM (DPV). Validation in food matrices demonstrates exceptional accuracy and reliability, yielding recoveries of 91–110%. This study not only provides a robust tool for trace SDZ monitoring but also establishes a new paradigm for CD-COF-powered MIP sensors integrating dual-mode signals for highly reliable contaminant analysis in real-world samples.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
POLYMER · 2026 · IF 5.1

Reactivity and flexibility enhancement of polylactide diol: one-pot synthesis and properties of poly(ε-caprolactone)-polylactide-poly(ε-caprolactone) triblock diol

Xu Hu,Kok Hoong Wong,Nai Yeen Gavin Lai,Haibin Yu

The low reactivity, easy hydrolysis, semi-crystallization and rigidity of polylactide (PLA) polyols inhibit their applications, especially in polyurethane (PU) preparation. This work proposes a poly(ε-caprolactone)-polylactide-poly(ε-caprolactone) (PCL-PLA-PCL) triblock diol to enhance the reactivity and flexibility of PLA diol while maintaining degradability, thereby expanding its applications. However, when synthesizing an oligomeric PCL-PLA-PCL triblock diol by cationic ring-opening polymerization catalysed by trifluoromethanesulfonic acid (TfOH) or methanesulfonic acid (MSA), numerous secondary hydroxyl groups (OH) were detected. Unlike synthesizing a high-molecular-weight polymer, monomer amount is limited during oligomerization, leading to distinct competition between initiation and propagation and yielding a PLA diol residue with secondary OH. Several factors, including temperature and the amounts of catalyst and monomer, were investigated to improve the primary OH content. Leveraging the inhibitory effect of excessive TfOH on the propagation rate of CL under limited monomer addition, PCL-PLA-PCL diol with a primary OH content of up to 90 % was obtained. On the contrary, excessive MSA, with a relatively weaker acidity, cannot effectively increase the primary OH content, whereas an excessive monomer amount remains helpful. The findings on the differences between synthesizing a high-molecular-weight PCL-PLA-PCL block copolymer and an oligomeric one may facilitate the construction of more high-performance block co-oligomers for drug delivery and PU applications. Compared with PLA diol, the PCL-PLA-PCL diol (∼2000 g/mol, CL: LA = 1: 1, with 90.1 % primary OH) has no crystallization behaviour, has reduced viscosity and much increased reactivity, making it a promising alternative to pure PLA diol for broader PU applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry C · 2026 · IF 5.1

Synergistic diameter control and post-treatment engineering of electrospun PVDF nanofibers toward β-phase enrichment and enhanced piezoelectric response

Han Qiu,Yang Xiao,Mohong Xu,Yiming Zhang,Hezhi He,Zhiwen Zhu

The development of high-performance flexible piezoelectric materials is essential for next-generation wearable and self-powered electronic devices. Poly(vinylidene fluoride) (PVDF), a representative piezoelectric polymer, suffers from an intrinsically limited piezoelectric response, which is primarily governed by the content and orientation of the electroactive β-phase. Conventional strategies for β-phase enhancement often involve complex processing with limited efficiency and scalability. Here, we report a facile and scalable electrospinning strategy for fabricating PVDF nanofiber mats with uniform and tunable diameters ranging from 100 to 1000 nm, achieved by regulating polymer molecular weight and solution parameters. A systematic investigation reveals a pronounced diameter-dependent enhancement of the β-phase content, with finer nanofibers exhibiting significantly higher electroactive phase fractions. To further improve the piezoelectric performance, a synergistic post-treatment combining multi-temperature thermal annealing and bias-controlled grid-corona poling was employed, leading to enhanced crystallinity and more efficient dipole alignment. As a result, ultrafine PVDF nanofibers with diameters of approximately 100 nm achieved a β-phase content of 95.1%, a crystallinity of 0.541, and an effective piezoelectric coefficient of 136.0 pC N−1, which is approximately 4–5 times higher than that of commercial PVDF films, together with a high sensitivity of 362.0 mV N−1. This work elucidates the coupled effects of nanoscale confinement and post-treatment on the structure–property relationships of PVDF nanofibers, providing practical insights for the scalable development of high-performance piezoelectric polymer materials.

CAS / MDL: 67-64-1 68-12-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2026 ·Vol. 14 ·期 2 ·121966 · IF 7.5

Electrochemical degradation of PFAS treated with synergetic oxidation system reveals structure- and dose-dependence

Yinhui Li,Naiju Che,Minggu Zhang,Chengliang Li

Given the threat posed by various legacy and novel per- and polyfluoroalkyl substances (PFAS) to the global environment and human health, it remains a priority to acquire information on associations with their structural merits for potential removal and understand their behavior in treatment processes. Herein, we investigated the effectiveness against 9 representative PFAS in a synergetic electrochemical system combining boron-doped diamond (BDD) anodic oxidation and Fe 3 O 4 -rGA cathodic Fenton-like reaction. Under optimized conditions (20 mA cm −2 , 10 mM Na 2 SO 4 , pH 6.0), this system was applicable for remediating various PFAS in water, with high destruction and removal efficiencies (>98%) and defluorination ratios (>50%), except for perfluorobutane sulfonic acid (PFBS). The results reveal that the rate and extent of degradation and defluorination have strong relationships with (i) PFAS initial concentration, (ii) fluoroalkyl chain length, and (iii) head functional groups. The coupled technology was valid over a broad initial concentration range (1–40 mg L −1 ), although the decay rate constant and defluorination decreased with increasing PFAS concentrations. Moreover, longer alkyl chain accelerated degradation and mineralization of PFAS. PFAS with different head groups exhibited varying degradation and defluorination rates and efficiencies. Degradation products were examined here to reveal the decomposition pathways of all PFAS. In conclusion, the efficient PFAS destruction and removal and the elucidated structure–reactivity relationships from this cooperative approach may provide valuable insights for developing effective strategies for combating PFAS contamination.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2026 · IF 9.6

Tuning surfactant packing parameter optimizes the stabilization of soil organic carbon by Organo-bentonite

Yuwen Shen,Bohan Cheng,Bing Liu,Shuying Jiao,Xinhao Gao,Hongcui Dai,Jinling Lv,Deshui Tan,Zongxin Li

This study demonstrates how the packing parameter ( P ) of cationic surfactants governs the efficacy of organo-bentonites in stabilizing soil organic carbon (SOC). A series of organo-bentonites, synthesized with single- and double-chain surfactants (C12–C18), were evaluated for their capacity to stabilize labile SOC. Higher P values promoted denser hydrophobic domains, primarily on the external surface of the bentonite, which enhanced the adsorption capacity for potassium fulvate (FA, the proxy for SOC). Didodecyldimethylammonium bromide-modified bentonite (DDAB-Bent), with the highest packing parameter ( P  = 0.5–0.6), achieved the highest FA equilibrium adsorption (428.93 mg/g). In soil incubation studies, DDAB-Bent reduced cumulative carbon mineralization by 40.18% compared to the control. In a 30-day pot experiment with Chinese cabbage, DDAB-Bent increased total SOC content by 35.42%, mineral-associated organic carbon (MAOC) by 51.76%, and plant biomass by 28%. Molecular dynamics simulations of the confined interlayer confirmed that higher P values lead to more compact surfactant aggregates and stronger FA adsorption. This study therefore validates the packing parameter as a key design tool for engineering organo-bentonites for enhanced SOC stabilization in agricultural soils.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ENERGY AND BUILDINGS · 2026 · IF 8

Cs+ substitution-enabled precision spectral engineering in Fe2+ doped phosphosilicate glass: Achieving high optical transparency and ultra-broadband thermal management for sustainable building integration

Guang Yang,Meng Zhang,Hao Liang,Jiangyuan Li,Viktor Takats,Yaroslav Shpotyuk,Xiaoyan He

Energy-efficient windows are crucial for enhancing energy efficiency. However, developing novel window materials that simultaneously achieve high visible light transmittance, exceptional ultra-broadband near-infrared (NIR) shielding performance, neutral color appearance, long-term stability, cost-effectiveness, and sustainable production remains a formidable challenge. This study introduces a breakthrough material fulfilling all these requirements: ferrous ion-doped phosphosilicate glass (Fe 2+ -PSG), which emerges as a promising candidate for energy-efficient windows. Comprehensive characterization using UV–Vis-NIR transmittance/absorption spectroscopy and Raman spectroscopy reveals that Fe 2+ -PSG exhibits remarkable visible light transmittance of 83.7 ± 0.5%, a neutral color temperature of 6809 ± 53 K, and a high NIR shielding figure of merit of 1.80 ± 0.01. These exceptional properties primarily originate from the formation of colorless ferrous [FeO 6 ] units, influenced by phosphorus and cesium oxide incorporation. Moreover, Fe 2+ -PSG exhibits outstanding stability, retaining its optical performance for over 10 years under ambient conditions, and maintaining structural integrity after 24-hour immersion hot water (80 °C) and hot air (120 °C) exposures. These superior characteristics stem from unique structural modifications that modulate the crystal field splitting energy of Fe 2+ ions, enabling precise tuning of optical properties across the visible and NIR spectral ranges. Produced via a scalable, facile and low-cost melt-quenching process, Fe 2+ -PSG offers a feasible and sustainable solution for energy-efficient window fabrication. This innovation overcomes existing technological limitations and facilitates widespread practical applications.

CAS / MDL: 1303-86-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Today Bio · 2026 · IF 11

Nanocomposite Hydrogel Acupoint Therapy for Sustained Pregabalin Delivery and Long-Term Neuropathic Pain Relief

Xiping Duan,Manjing Li,Zifan Liu,Wenyu Chen,Tianlong Chan,Ruoxi Zhang,Jia Zhou,Yichun Xu,Ke Wang

Neuropathic pain (NP) presents significant management challenges due to the limited efficacy and adverse effects associated with current therapeutic options. In this study, we present an innovative nanocomposite hydrogel designed for acupoint administration (PG@PLGA-gels) that synergistically combines nanomedicine with traditional acupuncture principles. This system is engineered by incorporating pregabalin (PG)-loaded poly (lactic-co-glycolic acid) nanoparticles into a chitosan/β-glycerophosphate thermosensitive hydrogel, facilitating minimally invasive administration at the Huantiao (GB30) acupoint. Compared to PG solution, PG@PLGA-gels exhibited a sustained drug release profile, extending over 12 days, with an initial release of 46.44% within the first 24 h, and increased systemic exposure by a factor of 2.6-fold. Following acupoint injection, plasma PG concentrations reached their peaked at 16 h (7985.94 ± 96.19 ng/mL) and remained detectable for up to 288 h, whereas PG solution peaked at 4 h (4928.33 ± 124.71 ng/mL) and declined to near-baseline levels by 192 h. In rat models of paclitaxel-induced neuropathy and chronic constriction injury, acupoint administration of PG@PLGA-gels significantly mitigates mechanical and cold allodynia from day 8 to day 20, while no obvious sedation-related behaviors were observed. Transcriptomic analysis identified treatment-associated changes in spinal cord gene expression profiles, with enrichment in pathways related to neuronal structure, synaptic organization, excitatory signaling, and neuroendocrine regulation. Together, these results support PG@PLGA-gels as an acupoint nanomedicine platform that combines controlled drug delivery with acupoint-based modulation to achieve prolonged analgesia with minimized adverse effects.

CAS / MDL: 9012-76-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。