ADVANCED MATERIALS
·
2026
·
IF 29.1
Miao He,Yuxin Fan,Niandong He,Yaoyao Li,Yichao Yan,Ke Yang,Sheng Liu,Bowen Zhang,Enquan Luo,Wei Chen,Yin Hu,Tianyu Lei,Peng Li,Dongjiang Chen,Dan Li,Yuanpeng Liu
Solid polymer electrolytes are promising for lithium metal batteries, yet achieving both high ionic conductivity and interfacial stability remains a major challenge. Here, we report a molecular rotor strategy that addresses this trade-off by incorporating 3-(1-Pyridinio)-1-propanesulfonate zwitterions (PP-Z) into a polyvinylidene difluoride electrolyte. This design establishes a dipole-rotation-assisted ion transport mechanism distinct from conventional polymer relaxation-dependent conduction. Molecular dynamics simulations and experiments reveal that the anchored cationic group of PP-Z serves as a pivot, while the mobile anionic end creates a dynamic coulombic field. This configuration facilitates rapid Li + migration through coordinated intrachain transport and interchain hopping, significantly enhancing ionic conductivity (5.1 × 10 −4 S cm −1 at 25°C and 1.5 × 10 −4 S cm −1 at 0°C) and the Li + transference number (0.52). The anionic terminals further participate in Li + solvation and promote formation of a LiF-rich solid electrolyte interphase, enabling stable cycling for 1200 h in Li||Li cells at 0.3 mA cm −2 and > 500 cycles in Li||LiFePO 4 cells at 1C (25°C). Even at 0°C, the Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (1.8 mAh cm −2 ) pouch cell retains 85.1% capacity over 50 cycles while delivering 78.3% of its room-temperature capacity initially.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Sijie Liu,Le Zhou,Jiaming Tan,Weixing Wu,Hongyu Li,Yun Zheng,Jianjun Chen,Kristiaan Neyts
The development of all-solid-state batteries (ASSBs) is critical for overcoming the safety and performance limitations of conventional lithium-ion batteries with liquid electrolytes. Solid polymer electrolytes (SPEs) offer promising processability and interfacial contact but suffer from low room-temperature ionic conductivity. Liquid crystal electrolytes (LCEs) have emerged as a solution, leveraging their self-assembling mesophases to create ordered ion transport channels that enhance conductivity. However, translating the molecular advantages of LCEs into high-performance devices requires advanced manufacturing techniques capable of precise structural control. This work introduces a novel 3D-printed, ultra-thin (20 µm) composite LCE membrane engineered for high dielectric constant ( ε r ′ ∼ 40) and ionic conductivity (~10 −3 S cm −1 ). The membrane is composed of a polymer matrix (PVDF), a polymer network formed by the reaction of liquid crystal (LC) monomer RM257 and thiol monomers, and the high-dielectric small molecule LC 4-cyano-4′-pentylbiphenyl (5CB). When integrated into ASSBs with a lithium metal anode and LiCoO 2 cathode, the printed LCE membrane enables outstanding long-term cycling stability (retaining a capacity of 76.6% over 3000 cycles). This study demonstrates that combining molecular design with additive manufacturing provides a powerful strategy for developing high-performance, durable, and safe ASSBs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Science
·
2026
·
IF 14.1
Xin Liao,Yi Hou,Jie Zhang,Bo Wang,Minghui Guo,Hua Qu,Wei Rao,Jing Liu
Thrombotic vascular diseases contribute to significant global mortality, yet current therapeutic strategies face persistent challenges, including bleeding risks, suboptimal efficiency, and procedural complexity. Here, we report a micro-explosive thermochemical thrombolysis (METCT) therapy via proximal injection of liquid alkali metal (LAM) encapsulated in dimethyl silicone (LAM@oil), which enables prompt, efficient, and safe vascular recanalization within an ultrafast timeframe (< 90 s). This LAM@oil system effectively disrupts thrombus tissue through a synergistic triple-action mechanism: mechanical micro-explosions forces, alkaline ablation due to highly localized exothermic chemical reactions, and thermal thrombolysis mediated by elevated temperature. Upon thrombolysis completion, the non-toxic reaction byproducts (sodium and potassium ions) exhibit physiologically biocompatible and metabolizable effects. Critically, the LAM@oil demonstrates significantly higher thrombolytic efficacy compared to clinically available thrombolytic drugs (residual thrombus area percent 10.87% ± 7.16% for LAM@oil vs. 80.86% ± 13.32% for urokinase), with no associated bleeding risks. This strategy opens a byproduct-green, cost-effective, and high-efficiency alternative to conventional thrombolytics, holding big potential for clinical translation in acute thrombosis management.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Science
·
2026
·
IF 14.1
Dongmei Xie,Mengran Chen,Xuefei Zhang,Yan Xu,Weiye Geng,Zhe Tang,Si-ze Lou,Shun Wan,Zhenguo Liu,Heng Liu,Peng-an Zong
Micrometer-scale chemical sensors serve as pivotal functional components that bridge microscopic environments and macroscopic information systems, yet integrating multiple sensing modalities within a single microscale fiber without compromising performance remains a challenge in materials design. Herein, we report a continuous wet-spinning process to fabricate multifunctional microfibers that integrate chemically responsive polyaniline (PANI) with high-Seebeck-coefficient tellurium nanowires (TeNWs). The optimized PANI/TeNWs composite fiber (60 wt.% TeNWs) achieves a Seebeck coefficient of 59.9 µV K −1 and a power factor of 9.2 µW m −1 K −2 , enabling passive temperature monitoring with a detection limit of 1 K, where thermal gradients directly generate the sensing signal. Simultaneously, the fiber demonstrates remarkable chemical sensing capabilities, exhibiting a Nernstian pH response (59.25 mV pH −1 ) and rapid ammonia detection (0.96 s at 50 ppm). By demonstrating both passive thermoelectric transduction and active chemical sensing in a single microfiber platform, this work establishes a versatile material system that combines energy-autonomous temperature sensing with high-performance chemical detection. This integrated approach offers substantial application prospects in precision medicine and environmental safety monitoring, where miniaturized sensors with diverse functionalities are urgently needed.
✓ 已验证
DOI
PubMed
高影响因子
Advanced Materials Technologies
·
2026
·
IF 6
Fanghua Pan,Yuwei Hao,Shouzheng Jiao,Changcheng Han,Zhengyu Chen,Lu Han,Ruping Liu,Yuanyuan Liu,Yang Zhou,Zhicheng Sun
Reliable temperature monitoring in cold chain logistics and food storage necessitates rapid detection of temperature excursions to ensure safety and quality. However, most existing approaches depend on powered sensors and complex data systems, limiting their suitability as passive, intuitive, and large area indicators for low temperature anomalies. Herein, raspberry-like low-temperature thermochromic microcapsules (RLTMs) were developed via a two-step interfacial polymerization approach as passive, large area visual indicators for low temperature monitoring. Structural analysis confirmed a hierarchical architecture with strong SiO 2 confinement, lowering the phase change onset from 12.1°C to −6°C and enabling graded thermal transitions. The RLTMs exhibited rapid, reversible color switching from −10°C to 37°C, achieving a visually distinct color difference (ΔE > 50) within 2 s at −10°C and full transition within 10 s. This high sensitivity originated from multi scale surface curvature that enhances diffuse scattering while minimizing glare. After 50 thermal cycles, the microcapsules retained fast response (<5 s) and high chromatic contrast, demonstrating excellent cycling stability. With a uniform size of 46.33 ± 5 µm, they can be directly screen printed as durable visual labels for food packaging and cold chain monitoring applications.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Ziming Song,Bin Huang,Haotian Hu,Cewen Liu,Qingzheng Li,Yuting Gao,Chi Zhang,Jun Wang,Heng Deng
Magnetic soft materials derive their programmable shape morphing from spatially encoded magnetic anisotropy, which typically requires the controlled reorientation of magnetic particles during fabrication. Magnetic fluids or suspensions, in which magnetic particles possess high rotational freedom, offer a promising platform for constructing and programming such materials. However, the intrinsic fluidity of magnetic suspensions also leads to severe magnetofluidic instabilities, preventing precise magnetic programming. Here, we introduce capillary locking as a general physical strategy to stabilize magnetic fluids in open systems. By infiltrating a magnetic polymer solution containing hard-magnetic microparticles into an interconnected porous scaffold, capillary forces at solid–liquid–air interfaces immobilize the fluid while preserving the rotational freedom of the magnetic particles. This interfacial confinement suppresses magnetically induced flow and surface instabilities without encapsulation, enabling stable magnetic domain programming under weak magnetic fields. The capillary locked magnetic phase can be reversibly liquefied and resolidified through solvent exchange, allowing repeated reprogramming and fabrication of flexible magnetic composites with programmable magneto-mechanical responses. Owing to the open porous architecture, the system further supports solvent-assisted processing, modular assembly, and material recycling. These results establish capillary locking as a universal route for constructing reprogrammable magnetic soft materials from inherently unstable magnetic fluids.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Zibing Xiao,Runjia Wang,Yuliang Shen,Li Zhang,Minghua Liu
Enantioselective adhesion is a highly sought-after property in advanced materials, with potential applications in chiral sensing, smart robotics, and enantiomeric separation. Chiral films with uniform morphology and well-tunable chirality can serve as excellent platforms for macroscale enantioselective adhesion, yet their facile fabrication remains challenging. In this study, we developed a new class of axially chiral fluoroalkylated amphiphiles and prepared uniform, optically transparent chiral films through a straightforward drop-casting technique. These films exhibit remarkable enantioselective adhesion properties. Homochiral films demonstrate strong interfacial adhesion and can withstand a weight of up to 3 kg per 0.2 mg·cm −2 of film, whereas heterochiral or racemic pairings show minimal adhesion. The enantioselectivity was further validated through macroscopic adhesion experiments and atomic force microscopy. Mechanistic studies indicate that fluorinated solvents regulate molecular orientation through affinity differences toward different moieties of amphiphilic molecules, exposing the naphthalene ring on the film surface. During the adhesion process, the chiral binaphthyl structure accomplishes chiral recognition through spatial configuration matching. This work presents the first demonstration of macroscopic visualization of chiral interactions through adhesive behavior, opening new avenues for chiral sensing, enantiomeric separation, and the rational design of chiral functional materials.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Jianhong Duan,Honglei Zhou,He Qi,Kun Wei,Qianbiao Du,Linzhao Ma,Fen Liu,Hao Li
The development of multilayer ceramic capacitors (MLCCs) with high-energy storage performance over a wide temperature range is critical for practical applications but remains challenging. Here, we propose a high-entropy design to disrupt the long-range ferroelectric order of tetragonal tungsten bronze (TTB) ceramics, inducing a polarization discontinuity composed of coexisting polar nanoregions and non-polar regions. This unique configuration delays polarization saturation while minimizing hysteresis loss through electrostatic interactions. Consequently, the TTB-based MLCC achieves a high recoverable energy density ( W rec ) of 15.8 J cm −3 and an ultrahigh energy efficiency ( η ) of 97.5%, yielding a record-high figure of merit of 632 J cm −3 for TTB-based ceramic capacitors. Furthermore, the MLCC exhibits outstanding thermal stability from 25°C to 150°C, maintaining W rec ≈ 13.04 ± 0.41 J cm −3 and η ≈ 95.43 ± 2.61%. The high-entropy-induced polarization discontinuity offers valuable insights into polarization modulation and provides an effective strategy for designing next-generation high-performance dielectrics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Qichao Ma,Yifan Liu,Jiazuo Zhou,Fangmiao Wang,Kunyang Liu,Xinyao Ji,Lei Qiao,Xue Tian,Shuaijie Ba,Shuting Cui,Bo Liu,Yudong Li,Guoliang Li,Haiyue Yang,Zhen Jia,Chengyu Wang
Wood is used as a high-performance structural material in advanced buildings owing to its high mechanical strength, sustainability, and environmental friendliness. However, to overcome the intrinsic size limitation of natural wood, developing green adhesives with high strength, self-healing, recyclability, and low cost to replace polluting petroleum-based products has become the key objective for the next stage in wood adhesives research. Inspired by the multiscale structure of gecko toe pads, this work develops a biomimetic self-healing adhesive featuring dual mechanisms of phase separation and mechanical interlocking. By introducing sodium acetate trihydrate (SAT) into a poly(vinyl alcohol) (PVA)/wood powder (W) adhesive, phase separation occurs to promote the formation of a dense hydrogen-bonding network and a mechanically interlocked microstructure, which makes the green, sustainable PVA/W/SAT adhesive with high shear strength (5 MPa). Benefiting from SAT's excellent phase-change capability, the material achieves phase-change-induced self-healing at crack interfaces. The combination of superior mechanical performance, self-healing functionality, and environmental friendliness makes the PVA/W/SAT adhesive a promising candidate for transforming waste wood into high-performance planks, significantly reducing the carbon footprint of structural materials.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Rendian Wan,Bing Li,Tenghui Yuan,Chaoxia Peng,Liuchen Wang,Bolin Xia,Peirong Chen,Ali Abdelhafiz,Xunhui Xiong,Enzuo Liu,Bote Zhao
Mn oxides are attractive earth-abundant catalysts for the acidic oxygen evolution reaction (OER). However, their durability is constrained by Mn overoxidation under high anodic potential. Here we demonstrate that dynamic La leaching can be harnessed to activate an oxygen-ligand-hole environment in Mn-based oxide (La 0.1 Mn 0.9 O x ), which suppresses Mn overoxidation. Ultraviolet-visible spectra of the electrolyte indicate that incorporating La into γ-MnO 2 shifts the onset potential for Mn VII O 4 − dissolution to a higher value. Operando spectroscopy reveals that La 0.1 Mn 0.9 O x exhibits a much more stable local MnO 6 framework than γ-MnO 2 under OER conditions. Theoretical analysis indicates that, upon Mn-site oxidation, La-leaching-induced metal vacancies amplify oxygen-ligand holes within distorted La─O─Mn motifs, enabling O-to-Mn charge compensation that suppresses Mn overoxidation. The electronic reconfiguration also modulates the Mn d -band center to optimize intermediate adsorption. La 0.1 Mn 0.9 O x delivers an overpotential 66 mV lower than that of γ-MnO 2 at 10 mA cm −2 geo , and sustains stable operation for 5000 h at 10 mA cm −2 geo and 1400 h at 100 mA cm −2 geo . This work highlights leaching-coupled oxygen-electronic regulation as an effective strategy for designing highly stable and active earth-abundant catalysts in acidic OER.
✓ 已验证
产品关联
DOI
高影响因子
Science Advances
·
2026
·Vol. 12
·期 21
·
IF 13.9
Yichun Ding,Fan Chen,Yizhou Jiang,Yufei Zhang,Xian Song,Jiaheng Liang,Zixuan Zhu,Muzhe Chen,Hong Hu,Chi Zhang,Leni Zhong,Yanhuan Huang,Qingtang Zeng,Xiaoling Hu,Qiyao Huang,Xingyu Jiang,Zijian Zheng
Ultrathin conductive hydrogels provide conformal and stable contact for flexible bioelectronics, which is critical for achieving the low impedance necessary for high-quality electrophysiological signal acquisition. However, their low modulus has made these hydrogel devices difficult to fabricate and handle. To overcome this, we present an on-demand formation strategy for creating ready-to-use, ultrathin (down to 1 micrometer) hydrogel-based bioelectronics that combine tissue-like softness with ready-to-use functionality. By using cross-linked electrospun polyvinyl alcohol (PVA) fiber mats, we produce liquid metal–patterned hydrogel tattoos (LMHTs). These devices transform from easy-to-handle dry films into adhesive, conformal hydrogel interfaces upon hydration. The resulting LMHTs are ultralight (0.9 milligrams per square centimeter), exhibit ultralow skin contact impedance (1.2 kilohms at 1 kilohertz), and show outstanding biocompatibility. We demonstrate their utility in diverse on-skin and implantable applications, including electrocardiogram recording, multichannel electromyogram mapping, neuromuscular electrical stimulation, and in vivo cardiac monitoring on a beating rat heart. This work offers a scalable and practical approach for generating high-performance, ultrathin hydrogel bioelectronics.
✓ 已验证
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Bang Yu,Fu-Xing Zhao,Yi-Jian Qian,Wei Peng,Meng-Han Zhu,Chen Chen,Zong-Ying Huang,Si-Zhe Sheng,Zhen He,Jin-Long Wang
Gel electrolytes, which supply compensating ions for electrochromic reactions and serve as conductive media, are widely used in electrochromic devices (ECDs). However, the complex preparation processes for gel electrolytes often involve the use of large amounts of organic solvents and hazardous or valuable reagents, limiting their widespread adoption in ECDs. This paper presents a straightforward method for fabricating large-area hydroxypropyl methylcellulose (HPMC) gel electrolytes using a solution casting technique in an aqueous system. The addition of deep eutectic solvents (DES) and the incorporation of SiO 2 nanoparticles significantly improve the conductivity of the gel electrolytes. The resulting HPMC/DES-SiO 2 gel electrolyte exhibits high transparency (over 92% transmittance), high ionic conductivity (7.55 × 10 −4 S/cm), wide electrochemical window (±3 V), and outstanding thermal stability. The W 18 O 49 /NiO ECD assembled with HPMC/DES-SiO 2 gel electrolyte shows excellent cycling stability (maintained 94.8% of initial optical modulation after 1000 cycles) and can perform electrochromic response over a wide temperature range from −50°C to 200°C. Furthermore, the entire HPMC and up to 82.7% of LiTFSI and NMA can be recycled and reprocessed into new gel electrolytes, offering a promising solution for the future development of environmentally friendly and efficient ECDs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子