INTERNATIONAL JOURNAL OF QUANTUM CHEMISTRY
·
2026
·Vol. 126
·期 13
·e70254
·
IF 2.7
Jiyang Zhang,Xu Zhang,Jiapeng Zhu,Chaoyang Huang,Bingchen Zhang,Wenxue Song,Jihong Liu,Guixiao Jia,Dawei Lan
Heteroatom doping is an effective approach to enhance sodium storage capacities of carbon materials. In this study, we synthesized P-doped porous carbon (C–P) materials with defects derived from lignite humic residues. The effects of introduced P, O, vacancy defects and combinations of these defects on Na storage capacities have been investigated using a combination method of density functional theory (DFT) calculations and experiments. Binding energies, geometrical and electronic structures of Na on graphene surfaces with various defects are calculated. The results indicate that the introduction of defects, particularly P-dopings, enhances the interaction between graphene and Na, improving the sodium storage capacity of the graphene. This is attributed to increased density of states of the modified graphenes at the Fermi level and strong covalent interaction between Na and P. These results are supported by experimental data, highlighting the role of the P-doping in improving sodium storage. Experimental studies demonstrate that P-doped porous carbon (C–P) with possible common defects such as O-adsorbed, P-doped, vacancy defects and combinations of these defects exhibits a reversible specific capacity of 179.5 mAh g −1 with over 90% capacity retention after 150 cycles at a current density of 0.1 A g −1 , and maintain a reversible specific capacity of 147.4 mAh g −1 after 1500 cycles at 1.0 A g −1 , superior to other analogous materials.
✓ 已验证
DOI
高影响因子
Polymers
·
2026
·Vol. 18
·期 12
·1435
·
IF 5.8
Mai Mao,Yuwei Hu,Lidong Liang,Tong Chen,Yitong Ji,Xueyuan Yang,Xiaoxiao You,Wenchao Huang
Sequential deposition (SD) processing offers advantages for morphology optimization of active layer and device stability in organic solar cells (OSCs). However, the insufficient solvent resistance of polymer donor layers often leads to uncontrolled interfacial mixing. Herein, we report a dual-step solvent vapor annealing (D-SVA) strategy to address this limitation, without requiring thermal annealing, making it suitable for ultrathin flexible OSCs. Sequential chlorobenzene (CB) and carbon disulfide (CS 2 ) vapor treatments enhance the molecular ordering and solvent resistance of the underlying donor layer, while reducing residual solvent and improving interfacial properties. As a result, the rigid SD processed OSCs achieve a power conversion efficiency (PCE) of 19.3%. Moreover, ultrathin flexible devices deliver a PCE of 17.3% with good mechanical stability. This work provides a general and scalable pathway toward high-performance and stable SD organic solar cells.
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 3.9
Guobin Lin,Yongyu Hou,Mengting Song,Wangchuan Xiao,Deshu Cheng,Juxiang Luo
Nitroxide-mediated polymerization (NMP) is a powerful technique, yet achieving precise control over methacrylic esters remains challenging. A novel alkoxyamine initiator, 3-(((2-cyanopropan-2-yl)oxy)(cyclohexyl)amino)-2,2-dimethyl-3-naphthylpropanenitrile (CNDN), featuring bulky naphthyl group, was synthesized via a three-step route (Schiff base reduction, Oxone oxidation, and radical coupling). This alkoxyamine enables well-controlled polymerization of methyl methacrylate (MMA) at 80°C with dispersities below 1.45. The polymerization follows first-order kinetics, and the molecular weight increases linearly with conversion. The high steric hindrance suppresses bimolecular termination, ensuring excellent end-group fidelity and successful chain extension with MMA, ethyl methacrylate, and styrene. Notably, CNDN also mediates controlled MMA polymerization without deoxygenation. This work presents an efficient initiator for controlled methacrylate polymerization under mild conditions and introduces a novel synthetic strategy that could enable general access to structurally diverse alkoxyamines. The resulting naphthyl-terminated polymers hold promise for fluorescent labeling, optical materials, and nanoparticle dispersants. Graphical A naphthyl-containing alkoxyamine initiator (CNDN) enables controlled methacrylate polymerization at 80°C with low dispersity, even without deoxygenation. This novel synthesis strategy could offer a versatile platform for accessing structurally diverse alkoxyamines for precision polymer materials.
✓ 已验证
产品关联
DOI
高影响因子
Processes
·
2026
·Vol. 14
·期 13
·2192
·
IF 3.4
Juan Miao,Bing Huang,Ge Wang
Maintaining effective fluid-loss control in water-based drilling fluids under coupled high-salinity, high-temperature, and high-density conditions remains a critical challenge in deep and ultra-deep drilling operations. In this study, a low-molecular-weight polymer fluid-loss additive (LM-ASQF) was synthesized via redox-initiated copolymerization of acrylamide, dimethyldiallylammonium chloride, and sodium allyl sulfonate. The synthesis route and proposed polymer structure were further illustrated to clarify the incorporation of amide, quaternary ammonium, and sulfonate functional units within the LM-ASQF molecular architecture. The polymer exhibited a controllable number-average molecular weight of 18.2–29.4 kDa with a unimodal distribution. Thermal analysis confirmed that no main-chain-dominated degradation occurred below 220 °C, indicating structural stability under high-temperature conditions. In drilling-fluid systems containing NaCl, CaCl2, and mixed salts (0–20%), LM-ASQF maintained stable rheological properties, with apparent viscosity ranging from 26.1 to 41.6 mPa·s, while the API fluid loss was controlled within 5.8–11.2 mL. After thermal aging at 220 °C for 16 h, the API fluid loss remained below 13 mL in both freshwater and mixed-salt systems. In high-density systems (1.80–2.40 g/cm3), the drilling fluids preserved continuous rheological structures and showed no abrupt increase in filtration. Mechanistically, fluid-loss control was primarily attributed to synergistic interfacial adsorption of amide groups, hydration stabilization induced by sulfonate functionalities, and particle rearrangement-driven filter-cake densification, rather than viscosity enhancement through long-chain entanglement. This mechanism enables effective filtration control without excessive viscosity increase, thereby maintaining rheological compatibility under complex conditions. These results demonstrate that the low-molecular-weight design strategy provides a reliable approach for achieving stable fluid-loss control in water-based drilling fluids under high salinity, elevated temperature, and high-density conditions.
✓ 已验证
产品关联
DOI
高影响因子
Small
·
2026
·
IF 11.8
Yuehui Chen,Zheng Yang,Panpan Gao,Songmei Sun,Weiyan Zhu,Jianhua Yan
Constructing photocatalysts with multidimensional active site architectures represents a powerful strategy for boosting visible-light-driven VOC degradation efficiency. Here, we report a structure regulation strategy achieved through interface coupling of a bimetallic gold-bismuth (Au-Bi) nanodot network with heteromorphic Bi 2 WO 6 composed of mesoporous nanofibers and nanosheets. This yields distinctive Au-Bi nanodot-anchored 1D/2D Bi 2 WO 6 photocatalysts exhibiting optimized charge transfer pathways and amplified surface reactivity. The bimetallic Au-Bi network collaboratively forms multi-scale Schottky junctions, effectively promoting the separation of photogenerated electron-hole pairs while simultaneously enhancing visible-light absorption via localized surface plasmon resonance effects. Concurrently, the in situ formation of 0D Au-Bi nanodots and heteromorphic 1D/2D Bi 2 WO 6 during reduction sintering induces abundant oxygen vacancies, promoting oxygen activation and reactive oxygen species generation. The multidimensional 0D/1D/2D Au-Bi/Bi 2 WO 6 photocatalyst rapidly and thoroughly degrades acetaldehyde, achieving degradation rates 13.2-fold and 5.92-fold higher than those of 1D/2D Bi 2 WO 6 and 1D/2D Bi-Bi 2 WO 6 , respectively. Moreover, this catalyst maintains exceptional stability across five consecutive cycles. This work pioneers an innovative methodology for designing high-performance heterogeneous photocatalysts.
✓ 已验证
DOI
PubMed
高影响因子
Journal of Composites Science
·
2026
·Vol. 10
·期 7
·365
·
IF 4.6
Shenao Liu,Xinglin Jiang,Hao Li,Qi Sun,Haitao Zhang
Fast-charging graphite-based lithium-ion batteries (LIBs) are limited by sluggish Li+desolvation, interfacial charge transfer, and solid-state diffusion in graphite (Gr). Herein, a salt-concentration-regulated lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in 1,3-dioxolane (DOL) and fluoroethylene carbonate (FEC) electrolyte is developed to construct an anion-involved solvation structure for fast-charging graphite-based LIBs. At an appropriate LiTFSI concentration, TFSI−is incorporated into the primary Li+solvation sheath, forming a contact-ion-pair (CIP)-dominated solvation structure. The optimized electrolyte exhibits a Li+transference number of 0.76 and an exchange current density of 0.28 mA cm−2, indicating accelerated Li+transport and interfacial charge transfer. Furthermore, a more uniform interfacial Li+flux distribution is obtained, contributing to suppressed localized Li growth. As a result, Gr||Li half cells deliver 168 mAh g−1at 10 C (1 C = 370 mAh g−1). LFP||Gr full cells with an LiFePO4(LFP) areal capacity of 4 mAh cm−2deliver 115 mAh g−1at 2 C and retain 69% capacity after 200 cycles. This work highlights moderate salt-concentration regulation in DOL/FEC electrolytes as an effective strategy for fast graphite lithiation without relying on fluorinated ether solvents or localized high-concentration formulations.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 5.2
Yishuo Ning,Yuxing Yue,Pengyuan Xu,Xing Zhao,Weiyan Tian,Mingdi Yang,Jingyan Zhang
The development of Janus hydrogels with asymmetric adhesion and high interfacial integrity remains a challenge in polymer engineering. Herein, we report an ingenious one-step sequential casting strategy to construct an all-biobased Janus hydrogel, named PA-G-X/Y/Z, by leveraging the density mismatch and gravitational stability between N-acryloyl aspartic acid (AASP) and methacrylated gelatin (GelMA) precursors. By systematic optimization of methacrylation degree (X), polymer concentrations (Y), and casting volume ratios (Z), a seamless interface was achieved through molecular diffusion and subsequent UV-induced covalent cross-linking with excellent mechanical properties of a tensile strain of 1529.7% and a tensile stress of 18 kPa. The incorporation of Laponite nanodiscs further reinforced the polymer network, resulting in a significant enhancement of a burst pressure up to 135 mmHg and a peeling strength of 216.3 ± 3.2 N/m. It remains stable after prolonged immersion in PBS or simulated gastric fluid (SGF), which is crucial for sealing pressurized organs like the stomach. The Janus material exhibits functional asymmetry: a highly swelling PA layer serving as an “swelling-assisted conformal sealing”, a highly hydrated G layer for antipostoperative adhesion, and the graded degradation of two layers aligns with the wound healing period. In vivo evaluations in a rat gastric perforation model confirmed that this exogenous metal-ion-immersion-free polymer system prevents excessive inflammation and supports orderly mucosal repair. This work provides a versatile physical-strategy-driven blueprint for the rapid manufacturing of advanced asymmetric surgical sealants.
✓ 已验证
DOI
高影响因子
Separations
·
2026
·Vol. 13
·期 7
·198
·
IF 3.5
Haicheng Zhao,Lihui Gao,Xinmeng Jiang,Yijing Zhang
Coal gasification slag (CGS), a massive industrial solid waste, possesses inherent adsorptive potential that remains underutilized due to pore blockage by amorphous siliceous phases. Conventional modification strategies typically rely on energy-intensive high-temperature processes. Herein, we report a facile, low-temperature alkaline activation approach to transform CGS into a high-efficiency adsorbent (denoted NCGS) for Cd2+removal. Sodium hydroxide (NaOH) solution was employed under mild conditions (90 °C) to selectively etch siliceous species, thereby generating a porous architecture and enriching surface oxygen-containing functionalities. Orthogonal experimental design identified optimal synthesis parameters (1 mol/L NaOH, solid–liquid ratio of 1:30 g/mL, 12 h), yielding NCGS with significantly enhanced textural properties. The adsorption isotherm was well described by the Langmuir model, with a maximum capacity of 87.06 mg/g at pH 6.0, while kinetic studies indicated the adsorption process could be described by pseudo-second-order kinetic model. Comprehensive characterization via SEM-EDS, FTIR, and XPS elucidated a multi-mechanistic adsorption pathway mainly involving ion exchange (Na+/Cd2+) and coordination complexation. Life cycle assessment analysis revealed that NCGS production generates 11.23 kg CO2eq emissions, with transportation accounting for 88%. This study presents an energy-saving and environmentally friendly strategy to unlock the adsorptive potential of CGS, providing a highly promising waste-based adsorption material for the remediation of Cd2+-contaminated water.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 3.9
Jiangtao Guo,Hongxiang Ou,Wenqian Zhou,Honglai Xue,Fang Zhu,Weikang Liu
In this work, a core–shell flame retardant (MF@β-CD) was prepared by coating β-cyclodextrin (β-CD) with melamine-formaldehyde (MF) resin through in situ polymerization. Amino-functionalized attapulgite (ATP-NH 2 ) was also prepared via silane modification. MF@β-CD and ATP-NH 2 were incorporated with piperazine pyrophosphate (PAPP) to fabricate flame-retardant PP composites through melt blending. The incorporation of MF@β-CD and ATP-NH 2 improved the fire performance and thermal stability of PP composites. The PP composite containing the MF@β-CD/ATP-NH 2 system exhibited a limiting oxygen index (LOI) of 33.8% and achieved a UL-94 V-0 rating. Compared with neat PP, the peak heat release rate and total smoke production decreased by 91.9% and 87.7%, respectively. Thermal analysis and char characterization suggested that the MF@β-CD/ATP-NH 2 system promoted the formation of a more continuous and stable char layer during combustion. The MF shell contributed to improved interfacial compatibility between β-CD and the PP matrix, while ATP-NH 2 helped maintain the integrity of the char structure. This work provides a feasible approach for improving the fire safety and condensed-phase stability of PP using bio-based flame-retardant components. Graphical Core–shell structured MF@β-CD was prepared via in situ polymerization and combined with amino-modified attapulgite (ATP-NH 2 ) and piperazine pyrophosphate (PAPP) to synergistically modify polypropylene (PP). The optimized composite achieved a limiting oxygen index (LOI) of 33.8% and a UL-94 V-0 rating. The incorporation of ATP-NH 2 resulted in a distinct lamellar stacking structure on the char residue surface, with the layered silicate sheets of ATP-NH 2 uniformly embedded in the organic char matrix. This enhanced the structural stability and thermal shock resistance of the char layer, preventing its cracking and peeling during high-temperature combustion.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2026
·Vol. 31
·期 14
·2407
·
IF 5.1
Junxiong Zhao,Juanping Zhang,Shengchao Xu,Leilei Wang,Xiaochen Li,Yiping Chen,Yan Yang,Guangming Xu
To address the potential ecological risks and environmental persistence of organosilicon-fluorine viscosity reducers in conventional silicone-fluoride drilling fluid systems, this work designs and synthesizes a non-organosilicon-fluorine, high-temperature, comb-shaped zwitterionic polymer viscosity reducer, AD-XSJ. The viscosity reducer is prepared via aqueous free-radical polymerization of acrylic acid (AA), acrylamide (AM), 2-acrylamido-2-methylpropane sulfonic acid (AMPS), and dimethyl diallyl ammonium chloride (DADMAC), and it exhibits low molecular weight, uniform molecular weight distribution, and excellent thermal stability. Analyses by FT-IR, thermogravimetry, particle size, zeta potential measurements and Electrostatic potential (ESP) demonstrate that AD-XSJ dismantles the bentonite network structure through the synergistic combination of hydrogen-bonding adsorption and electrostatic repulsion, releasing trapped free water and thereby substantially reducing viscosity and gel strength. Compared with conventional organosilicon-fluorine viscosity reducers, AD-XSJ exhibits superior viscosity reduction capability under high-solid, high-temperature, and high-salinity calcium-contamination conditions, achieving viscosity reduction rates of 33.3% and 50.0% in fluids contaminated with 10.0% NaCl and 1.0% CaCl2, respectively. In field applications under conditions of high bentonite content and calcium contamination, the viscosity reduction rates reach 57.7% and 62.5%, accompanied by markedly improved rheological properties and an average borehole enlargement rate of only 5.7%, indicating effective shale inhibition and anti-sloughing performance. Integrating efficient viscosity reduction, dispersion stabilization, and inhibition capabilities, this viscosity reducer can replace traditional organosilicon-fluorine products, reduce potential hazards to aquatic ecosystems at the source, and holds considerable promise for engineering and environmentally conscious deployment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Energy & Environmental Materials
·
2026
·
IF 13.8
Zhe Sun,Jianye Wang,Zengxuan Chen,Huashuo Zhang,Siyuan Liu,Bo Liao,Zhaojie Wang,Xiaoqing Lu
The development of efficient and stable oxygen evolution reaction (OER) electrocatalysts is crucial for sustainable hydrogen production through water splitting. Though NiFe-layered double hydroxide (NiFe-LDH) represents a promising non-precious catalyst, its practical application is hindered by rapid degradation under operation due to metal leaching and sluggish kinetics. Bridged-linked structures were synthesized using a hydrothermal method. Inspired by the amino acids in photosystem II (PSII), we reported an organic–inorganic hybrid electrocatalyst of NiFe-LDH coupled with 4-chlorobenzoic acid (CA) that synchronously enhances OER activity and stability. The bidentate CA ligand bridges adjacent LDH layers via Fe-O-C and Fe-Cl-C bonds, modulating the electronic structure of metal centers and facilitating proton-coupled electron transfer. The resulting NiFe-LDH-CA exhibits an ultralow overpotential of 213 mV at 10 mA cm −2 , and remarkable stability over 550 h at 500 mA cm −2 in alkaline medium. It can also operate stably for 120 h under industrial conditions, experiencing virtually no performance degradation. In situ Raman spectroscopy and pH-dependent studies reveal that the anchored CA acts as a dynamic proton-transfer relay, facilitating concerted proton-electron transfer during OER. DFT calculations further confirm the reduced energy barrier of the rate-determining steps and promote the reaction kinetics. Additionally, the introduction of Fe-O-C/Fe-Cl-C bridge structure prevents the Fe species from dissolution during OER, thereby enhancing the stability of the catalyst. This work offers valuable insights for designing high-performance catalysts with bio-inspired proton-management functionality.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Zhibo Huang,Tiandi Pan,Haoxuan Mai,Ning Tang,Fei Sun,Peijian Du,Ni Li
Nanofibrous membranes have great potential for treating oily wastewater. However, the random stacking of nanofibers during the electrospinning process resulted in a broad pore size distribution and reduced separation efficiency. Moreover, for oil-in-water emulsions stabilized by ionic surfactants, the small oil droplets deform under the applied pressure and are squeezed into the membrane pores, leading to a decrease in flux and fouling. In this work, we developed superhydrophilic nanofibrous membranes with demulsification properties via electrospinning and a solvothermal seed-induced method. Notably, the incorporation of ZIF-8 nanoparticles offers multiple advantages, such as reducing membrane pore size, increasing the surface roughness, and enhancing membrane surface charge. These features synergistically improve both separation selectivity and demulsification properties. As a result, the membrane exhibits outstanding separation performance, achieving a separation efficiency of 96.37% for diesel-in-water emulsions and a high permeation flux of 4100 L m −2 h −1 for dichloromethane-in-water systems. This work provides an effective strategy for developing high-performance membranes for oil-in-water emulsions separation applications.
✓ 已验证
产品关联
DOI
高影响因子