Materials
·
2026
·Vol. 19
·期 13
·2929
·
IF 3.7
Teng Yuan,Yunhao Jiao,Qian Su,Yujin Yao,Huaxin Chen,Yongchang Wu
Under low-temperature and high-humidity conditions, stable ice layers readily form on asphalt pavements in cold regions, and the enhanced ice–asphalt interfacial adhesion significantly increases deicing difficulty and traffic safety risks. To clarify the factors governing ice–asphalt interfacial adhesion strength, this study combines macroscopic pull-off tests and molecular dynamics simulations to systematically investigate the effects of interfacial contact area, temperature, pull-off rate, and molecular characteristics of representative asphalt components. The pull-off results show that adhesion strength increases markedly with decreasing temperature, rising from approximately 163 kPa at −2 °C to 242 kPa at −10 °C. In contrast, the nominal adhesion strength decreases with increasing ice specimen size, suggesting that size-related interfacial heterogeneity and nonuniform stress transfer may contribute to the pull-off response. The adhesion strength also generally decreases as the pull-off rate increases. Molecular dynamics simulations show that smaller asphalt–ice interfacial models exhibit higher molecular-scale nominal adhesion responses, while temperature-dependent simulations provide short-range asphalt–ice interaction descriptors for interpreting the experimental temperature trend. The calculated short-range asphalt–ice interaction energy becomes less negative from −531.4 to −352.5 kJ mol−1with increasing temperature, supporting the experimentally observed strengthening of adhesion at lower temperatures. Single-molecule pull-off simulations of 12 representative asphalt molecules reveal pronounced molecular differences, with molecular-scale nominal adhesion strengths ranging from 303.7 to 734.6 MPa. Asphaltene and polar aromatic molecules generally show stronger adhesion, which is associated with larger projected contact area, flatter molecular configurations, and heteroatom-induced polar sites. The molecular polarity index shows a moderate positive association with molecular-scale nominal adhesion strength. These results establish a scale-aware mechanistic correspondence between macroscopic pull-off behavior and molecular interaction descriptors at the ice–asphalt interface, providing insights for interfacial adhesion regulation and anti-icing design of asphalt pavement materials in cold regions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2026
·
IF 11.8
Ziyu Wan,Jiakun Xue,Guowei Liu,Jiaqi Ding,Yu Zhang,Zhenqi Gong,Chengyuan Peng,Wenpei Shi,Jiale Su,Shuyu Liu,Jiangnan Xia,Huipeng Chen,Lang Jiang,Lei Liao,Yuanyuan Hu
Biological synapses process complex temporal information through a diverse range of excitatory postsynaptic current (EPSC) decay scales. However, conventional neuromorphic hardware often employs homogeneous synaptic models, limiting its capacity for multi-scale temporal tasks. Here, we present a material-to-system co-design strategy to emulate biological temporal heterogeneity using anion-engineered organic electrochemical transistors (OECTs). By tailoring the anion species within a solid-state ion-gel electrolyte utilizing BF 4 − , TFSI − , and MeSO 4 − , we demonstrate precise control over ionic reverse diffusion kinetics, realizing the controllable tuning of synaptic decay constants (from 0.275 s to 1.059 s). These stateful synapses act as intrinsic leaky integrators, embedding short-term memory directly into the device hardware. We evaluate these devices across diverse spiking neural network (SNN) architectures, including feedforward SNNs and liquid state machines (LSMs), using four benchmark datasets. Our results reveal a critical timescale-matching effect: fast-decaying synapses optimize spoken digit recognition (TI-46, 89.4%), while slow-decaying synapses are essential for long-term event integration (DVS Gesture, 88.5%). By transforming synapses from passive transmitters into active physical regulators of network computation, this work provides a versatile hardware platform for constructing task-adaptive neuromorphic systems capable of processing complex spatiotemporal information.
✓ 已验证
DOI
PubMed
高影响因子
Materials
·
2026
·Vol. 19
·期 13
·2914
·
IF 3.7
Yating Zhuang,Chongyang Fu,Benxing Guo,Weihao Zhai,Xueting Ren,Depeng Fu,Xianchao Li,Guangzheng Wang,Qizheng Li,Yidan Xiao,Shuye Zhang,Hanbin Wang,Xiaoxiong Wang
Passive daytime radiative cooling (PDRC) materials require high solar reflectance and high atmospheric window emissivity. However, high solar reflectance achieved by scattering strategies often relies on porous structures, which can compromise the material’s mechanical reliability. To address this trade-off, we develop a layered alumina nanofiber membrane (LANM) by dual-nozzle electrospinning with programmed alternating deposition, in which alternating deposition and subsequent removal of alumina precursor layers and sacrificial polyvinyl alcohol (PVA) interlayers generate a continuously layered architecture with periodic interfaces and interlayer air gaps. This interfacial geometric design enables simultaneous regulation of solar-band scattering and bending load transfer within a single alumina system. Because photon flux attenuates with depth, shallow interfaces contribute more strongly than deeper ones; therefore, the micro-layered architecture enhances scattering while maintaining high emissivity in the atmospheric window. In outdoor testing, LANM achieved a maximum sub-ambient temperature reduction of ~5.8 °C, representing a further improvement of about 2.4 °C compared to Monolithic alumina nanofiber (ANM). Moreover, interlayer interfaces induce a multiple-neutral-axis mechanism and segmented stress transfer, thereby improving bending deformability rather than load-bearing strength.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2026
·
IF 3.1
Wenqian Zhou,Hongxiang Ou,Jiacheng Xu,Honglai Xue,Fang Zhu
Based on the synergistic effects among phosphorus, nitrogen, and boron elements, this study developed a novel and highly efficient flame-retardant system to enhance the fire safety of polypropylene (PP) during its application. An integrated intumescent flame retardant (IFR) was prepared via supramolecular self-assembly by surface-modifying piperazine phosphate (PAPP) with phytic acid (PA) and melamine (MEL), and was named PM@PAPP. Subsequently, it was combined with zinc borate (ZB) to prepare flame-retardant PP composites. The PM@PAPP/ZB/PP composite exhibited excellent flame retardancy and smoke suppression performance. Specifically, the limiting oxygen index (LOI) of PP5 reached 35.3%, and its vertical burning test (UL-94) rating was V-0 level. The peak heat release rate (pHRR) was 91% lower than that of pure PP. The peak smoke production rate (pSPR) of PP5 decreased from 0.097 m 2 /s for pure PP to 0.007 m 2 /s, representing a reduction of 93%. Furthermore, thermogravimetric analysis (TGA) and Raman spectroscopy results confirmed that the synergistic effect of ZB and PM@PAPP promoted the formation of continuous and dense carbon layers. This study provides a new strategy for improving the flame-retardant properties of PP and expanding its application in fields with strict fire safety requirements.
✓ 已验证
产品关联
DOI
高影响因子
HUMAN MUTATION
·
2026
·
IF 1.8
Xiaomei Nie,Gang Su,Ran Zhang,Han Wang,Mingbo Li,Qian Liang
Background Diabetic retinopathy is caused by chronic hyperglycemia, which damages the retina′s blood vessels and neurons. This study is aimed at identifying potential therapeutic targets for DR. Methods Transcriptomic and proteomic data were obtained from the Gene Expression Omnibus (GEO) and ProteomeXchange databases, respectively. Differentially expressed genes (DEGs) and differentially expressed proteins (DEPs) were intersected. An enrichment analysis of the overlapping genes was performed based on the DAVID database. A protein–protein interaction (PPI) network (STRING) was analyzed via Cytoscape/cytoHubba to identify key genes. Single‐cell RNA‐sequencing (scRNA‐seq) data were processed using Seurat. Gene set enrichment analysis (GSEA) (clusterProfiler) and molecular docking (EnrichR) were performed. High glucose‐induced retinal microvascular endothelial cells (RMECs) were used for functional assays. Results The intersection of DEGs and DEPs yielded shared genes, enriched in the PI3K–Akt signaling pathway, AGE–RAGE signaling pathway in diabetic complications, complement and coagulation cascades, and ECM–receptor interaction; a PPI network incorporating these genes revealed two key DR‐associated highly expressed genes, COL1A1 and SERPINE1. GSEA showed that samples with high expression of these key genes were enriched in pathways such as reactome signaling by TGFB family members, inflammatory response, TGF‐ β signaling, and reactome cell extracellular matrix interactions. Single‐cell and molecular docking analyses revealed high expression of the two key genes in fibroblasts and binding between SERPINE1 and paricalcitol, and HG induction increased their levels in RMECs, whereas knockdown of SERPINE1 repressed RMEC proliferation, migration, and invasion in vitro. Conclusion This study identifies SERPINE1 and COL1A1 as possible DR therapeutic targets, providing new insights into relevant therapeutic development.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Metabolites
·
2026
·Vol. 16
·期 7
·475
·
IF 4.5
Leilei Zuo,Yan Chen,Yuxuan Luo,Huan Yang,Dayi Chen,Ying Zhang,Xiao Meng,Waralee Watcharin
HighlightsWhat are the main findings?We identified 1550 metabolites (flavonoid-dominant), 152 key active ingredients of traditional Chinese medicine (TCM-KAIs), and 204 pharmaceutical disease-resistant ingredients (PDRIs) in the flower bud ofStyphnolobium japonicumcv. Jinhuai (FBSJvJ).Geographic origin drove metabolic divergence. Guangxi samples were enriched in lipids and nucleotides, while Sichuan samples were enriched in flavonoids and phenolic acids. In addition, three core biomarkers were identified.What are the implications of the main findings?Biomarkers enable origin authentication and precision quality control compared to a single marker (rutin), supporting traceability and regulatory compliance for food and medicinal products.Regional metabolic signatures can help identify functional ingredients and guide product formulation, processing optimization, and cultivar selection for food and medicinal development.Background/Objectives:Styphnolobium japonicumcv. Jinhuai (SJvJ) represents a medicinal and edible plant whose metabolite composition is strongly shaped by its growing location. Current quality control methods mainly rely on rutin quantification, lacking comprehensive metabolic markers for origin discrimination. Therefore, this study aimed to profile interregional metabolic differences between Guangxi and Sichuan SJvJ flower buds, identify characteristic differential markers, and clarify relevant metabolic pathways, thereby guiding quality control, germplasm evaluation, and functional food development. Methods: Ultra-high performance liquid chromatography–tandem mass spectrometry (UPLC-MS/MS) was employed to identify metabolites. The Traditional Chinese Medicine Systems Pharmacology Database and Analysis Platform (TCMSP) and Cancer HSP were applied to screen the key active ingredients of traditional Chinese medicine (TCM-KAIs) and disease-related pharmaceutical ingredients (PDRIs). Specifically, we targeted six highly prevalent human diseases and another five disorders based on therapeutic indications documented in the Chinese Pharmacopoeia. Multivariate analyses, such as principal component analysis, hierarchical clustering analysis, and other statistical methods, were applied to investigate differential metabolites. The Kyoto Encyclopedia of Genes and Genomes (KEGG) database was utilized for pathway enrichment analysis of marker metabolites. Results: In total, 1550 metabolites were identified across 12 categories, predominantly flavonoids. Additionally, 152 TCM-KAIs and 204 PDRIs against 11 diseases were screened. Multivariate analyses indicated that geographical origin was closely associated with observed metabolic variation among the tested samples: Guangxi samples accumulated higher lipids and nucleotides, whereas Sichuan samples showed higher levels of flavonoids and phenolic acids. Vanilloloside, protocatechuic acid-4-O-glucoside, and gallic acid-4-O-glucoside were identified as key inter-group biomarkers. KEGG enrichment analysis revealed enhanced metabolism of nucleotide/pyrimidine in Guangxi, whereas zeatin biosynthesis was upregulated in Sichuan, consistent with discrepancies in regional climatic patterns. Conclusions: This study established a more comprehensive metabolomic dataset for FBSJvJ. It also clarified the correlations between origin and quality and unraveled the underlying mechanisms. These findings facilitate origin authentication, standardized quality control, and rational exploitation of FBSJvJ as raw materials of functional foods.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Small
·
2026
·
IF 11.8
Min Xue,Wenchao Zhang,Yiwei Ding,Feng Sun,Xiujun Han,Mingzhi Wei,Shunwei Chen,Conghui Si,Ying Wang,Zhonghua Zhang
High-entropy perovskite oxides (HEPOs) exhibit great application prospects in electrocatalysis due to their enormous compositional design space. Herein, nanoporous La-based HEPOs were synthesized for the first time through a dealloying and annealing strategy, and employed as electrocatalysts for alkaline hydrogen evolution reaction (HER). The HEPOs exhibit single-phase cubic perovskite structures and three-dimensional nanoporous architecture. Among them, L5M-0Cr (La(Ni 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ru 0.2 )O 3-δ ) demonstrates exceptional alkaline HER activity, achieving a low overpotential of ∼50.6 mV at -10 mA cm − 2 and a small Tafel slope of ∼60.1 mV dec − 1 , surpassing most reported perovskite-based catalysts and exceeding Pt/C at high current densities. Additionally, L5M-0Cr shows remarkable stability over 120 h of continuous operation and delivers promising performance in overall water-splitting systems. Structural characterizations, in situ Raman spectroscopy, and density functional theory (DFT) calculations reveal that lattice distortion and charge redistribution within high-entropy systems can effectively modulate electronic structure, inducing strong hybridization between Ru 4d and O 2p orbitals. Theoretical simulations are employed to establish the volcano-type correlation between hydrogen adsorption free energy (ΔG *H ) and HER exchange current density (log i 0 ). This work demonstrates that high-entropy design synergistically optimizes the structural, electronic, and catalytic properties of perovskites, providing a promising strategy for developing efficient electrocatalysts in energy conversion applications.
✓ 已验证
DOI
PubMed
高影响因子
Biosensors-Basel
·
2026
·Vol. 16
·期 7
·372
·
IF 6.2
Ling Yang,Dandan Peng,Haihu Tan,Yahu Wang,Xin Lu,Fanming Zeng,Shigang Liu,Yuejun Liu
Accurate discrimination of multiple heavy metal ions is essential for environmental monitoring. This study developed a simple fluorescent sensing array utilizing carbon dots derived from black plum peels (PCDs) for the precise identification of metal ions in environmental waters. Three structurally distinct PCDs were hydrothermally synthesized using phenylenediamine isomers as nitrogen dopants, exhibiting distinct fluorescence response patterns to target ions. Pattern recognition was performed using linear discriminant analysis (LDA) and hierarchical clustering analysis (HCA). The optimized system (pH 5–7) achieved high discrimination accuracy for eight metal ions (Sn2+, Ag+, Hg2+, Fe3+, Cr3+, Pb2+, Sb3+, and Cu2+) at 5–400 μM concentrations. The array effectively identified the binary and ternary mixtures of Hg2+/Cu2+/Cr3+and successfully detected target ions in river water samples. This cost-effective and scalable approach demonstrates strong potential for applications in water quality monitoring and food safety.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
PHYTOTHERAPY RESEARCH
·
2026
·
IF 8.1
Jing Qin,Huanhuan Huang,Mengzhen Xu,Lin Zhu,Haoli Liu,Xinyu Qian
Laminin promotes tumor progression, but its role in small-cell lung cancer (SCLC) remains unclear. Curcumol, a natural compound from Curcumae Rhizoma, has anti-tumor activity. Here, we tested the hypothesis that Curcumol disrupts Laminin–Integrin β1 interaction to suppress SCLC. SBC-2 and H69 cells were cultured on Laminin-coated substrates. Cell functions were assessed by Transwell migration, colony formation, and MTT assays. Molecular mechanisms were investigated through qRT-PCR, Western blot, molecular docking, Co-IP, and Dot blot assays. Target specificity was confirmed by Integrin β1 mutagenesis. The therapeutic efficacy of Curcumol was evaluated in xenograft mouse models. Laminin enhanced malignant phenotypes in SCLC cells, accompanied by the activation of FAK/ERK and TGF-β/Smad2/3 pathways. Curcumol inhibited the laminin-promoted malignant phenotypes and epithelial–mesenchymal transition (EMT) in SCLC cells and suppressed the expression of related proteins. Mechanistic studies revealed that Curcumol directly bound to Integrin β1, competitively inhibiting the binding of Laminin to Integrin β1 and the activation of downstream signaling. Target specificity was validated through mutagenesis studies, where Curcumol exhibited reduced efficacy in Integrin β1-mutant cells. In vivo, Curcumol (100 mg/kg, oral) attenuated Laminin-driven tumor growth, suppressed EMT and FAK/ERK signaling, with no detectable toxicity. Integrin β1 is a key mediator of Laminin's pro-tumorigenic effects in SCLC. Curcumol disrupts Laminin–Integrin β1 interaction, inhibits FAK/ERK signaling and EMT, and suppresses tumor progression, representing a promising therapeutic strategy.
✓ 已验证
DOI
PubMed
高影响因子
Polymers
·
2026
·Vol. 18
·期 13
·1677
·
IF 5.8
HanJiong Ji,Shengqiang Liao,Shibo Wu,Sijia Chen,Xue Guan,Chenlong Li,Dawei Zhang
The skin is the largest organ of the human body and, due to its direct contact with the external environment, is one of the most vulnerable tissues. Traditional medical bandages and gauze exhibit limited efficacy in wound management, often neglecting the control of wound inflammation and the promotion of skin regeneration. Hydrogels, as an emerging material, possess appropriate swelling capacity, oxygen permeability, and the ability to absorb wound exudates, thereby facilitating wound healing, making them an ideal choice for functional applications in skin tissue engineering. In this study, dual-treated balsa wood (BWSM) was used as the hydrogel substrate, with polyvinyl alcohol (PVA), chitosan (CS), and zinc gluconate (ZnG) used as the primary raw materials. The BWSM/PVA/CS/ZnG hydrogel was prepared via gamma-ray irradiation. Balsa wood treated with alkaline solutions, hydrogen peroxide solutions, and microwave treatment processing exhibited enhanced transparency, increased porosity, improved thermal stability and swelling rates, while retaining adequate mechanical strength. Gamma-ray irradiation of the BWSM/PVA/CS/ZnG hydrogel wound dressing demonstrated sustained drug release and antibacterial efficacy through release and antimicrobial tests. Animal experiments showed that the BWSM/PVA/CS/ZnG composite hydrogel promoted wound healing in mice and effectively prevented scar formation. The aforementioned results demonstrate that the PVA/CS/ZnG composite hydrogel loaded with balsa wood exhibits durable antibacterial properties and high mechanical strength and promotes wound healing, making it suitable for applications in biomedical materials such as wound dressings.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 3.9
Kaihang Zhou,Xiaoshuai Han,Bin He,Shuijian He,Gaigai Duan,Shaohua Jiang
To tackle the issue of interfacial incompatibility between hydrophilic acid-activated sepiolite nanofibers (A-SEP) and hydrophobic thermoplastic polyurethane (TPU) matrices, this study utilizes methyl trimethoxysilane (MTMS) to perform surface hydrophobization modification on A-SEP. By silane coupling, hydrophobic methyl groups ( CH 3 ) are introduced to improve interfacial compatibility. MTMS modified-acid-activated sepiolite nanofibers/TPU (MSNF/TPU) nanocomposite films are prepared using the solution casting method, and systematic characterization reveals that: the mechanical properties of the modified composites (tensile strength, elongation at break, Young's modulus) are significantly enhanced, thermal stability (decomposition temperature, residual carbon rate) is improved, and the glass transition temperature ( T g ) is adjustable. The transparency in the visible light spectrum is positively correlated with the state of fiber dispersion. This work offers a scalable interfacial engineering strategy for clay mineral-reinforced polymer composites. Graphical Incorporation of MSNF into a TPU matrix significantly enhances mechanical performance, with optimal loading (1.0 wt%) improving both tensile stress and strain at break. Compared to sepiolite-based composites (R-SEP, A-SEP), MSNF/TPU exhibits superior reinforcement. Uniform MSNF dispersion enables efficient stress transfer, yielding high-performance flexible composites for advanced applications.
✓ 已验证
产品关联
DOI
高影响因子
Laser & Photonics Reviews
·
2026
·
IF 9.7
Chenxi Xu,Kejie Li,Jiaqi Zhao,Dongxu Guo,Tianqi Sheng,Zuoling Fu
Luminescent thermometry in the second near-infrared (NIR-II) window holds significant promise for non-invasive. However, its practical application is severely hindered by thermal quenching at elevated temperatures, which limits the development of highly sensitive NIR-II thermometers capable of thermally enhanced emission. Here, we present a rationally designed integer phonon-matching strategy that enables NIR thermal enhancement specifically in singly Er 3+ -doped Ca 2 YNbO 6 double perovskite hosts. Through combined experimental investigations and rate equation modeling, we reveal that efficient multi-phonon relaxation (MPR) between the Er 3+ : 4 I 11/2 and 4 I 13/2 levels is activated when the electronic energy gap corresponds to an integer multiple ( n ≤ 5) of the dominant phonon energy. This resonant phonon-matching condition facilitates highly efficient MPR with increasing temperature, leading to a pronounced 1.66-fold enhancement in the Er 3+ NIR-II emission. Furthermore, we demonstrate the simultaneous occurrence of NIR thermal enhancement and ratiometric temperature sensing in Ca 2 YNbO 6 : Yb 3+ /Er 3+ /Ho 3+ /Pr 3+ crystals, achieving an exceptional relative sensitivity of 0.87% K −1 at 398 K. These findings not only circumvent the thermal quenching limitations of NIR-II phosphors but also establish phonon engineering as a versatile strategy for designing thermally enhanced luminescence, opening new avenues for flexible monitoring of pipeline integrity and organic compound leakage based on differential NIR-II luminescence absorption.
✓ 已验证
产品关联
DOI
高影响因子