ACS Omega
·
2023
·
IF 4.1
Jie Liang,Weiwei Zhang,Jun Wang,Wanzhen Li,Fei Ge,Weihao Jin,Yugui Tao
Recently, the combination of chemotherapy and chemodynamic therapy (CDT) has become a desirable strategy in the treatment of cancer. However, a satisfactory therapeutic outcome is often difficult to achieve due to the deficiency of endogenous H2O2 and O2 in the tumor microenvironment. In this study, a CaO2@DOX@Cu/ZIF-8 nanocomposite was prepared as a novel nanocatalytic platform to enable the combination of chemotherapy and CDT in cancer cells. The anticancer drug doxorubicin hydrochloride (DOX) was loaded onto calcium peroxide (CaO2) nanoparticles (NPs) to form CaO2@DOX, which was then encapsulated in a copper zeolitic imidazole ester MOF (Cu/ZIF-8) to form CaO2@DOX@Cu/ZIF-8 NPs. In the mildly acidic tumor microenvironment, CaO2@DOX@Cu/ZIF-8 NPs rapidly disintegrated, releasing CaO2, which reacted with water to generate H2O2 and O2 in the tumor microenvironment. The ability of CaO2@DOX@Cu/ZIF-8 NPs to combine chemotherapy and CDT was assessed by conducting cytotoxicity, living dead staining, cellular uptakes, H&E staining, and TUNEL assays in vitro and in vivo. The combination of chemotherapy and CDT of CaO2@DOX@Cu/ZIF-8 NPs had a more favorable tumor suppression effect than the nanomaterial precursors, which were not capable of the combined chemotherapy/CDT.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FUEL PROCESSING TECHNOLOGY
·
2023
·
IF 7.5
Qiang Le,Zan Liu,Zhilin Cheng
In this work, a novel core-shell nanostructured coaxial nanofiber membranes (CFMs) were successfully produced by the coaxial electrospinning . The structure and composition of CFMs were probed by a series of characterizations. The results demonstrated that the CFMs were comprised of the versatile core-shell structure nanofibers, therein Cu(I)/UIO-66 scattered in the shell layer and HNTs dispersed in the core layer. As applied in the selective adsorption desulfurization , the Cu(I)/UIO-66 embedded on the surface of the nanofiber undertook the adsorption active sites, while HNTs in core layer served as enhancing the mechanical performance of PAN nanofibers. The CFMs had the superior adsorption performance in the batch adsorption (maximum:40.14 mg·g −1 ) and fixed-bed adsorption (maximum: 47.43 mg·g −1 ) capacities for benzothiophene (BT) from fuel oil, respectively. Furthermore, due to having the robust mechanical performance, the CFMs exhibited the preferable recycling adsorption and mechanical stability . The adsorption mechanism of BT molecules on CFMs was explored by the kinetics, isotherms and thermodynamic models , indicating the existence of the synergistic effect of physical adsorption and chemical adsorption.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2023
·
IF 3.3
Yawen Guan,Shanshan Fu,Wanyu Song,Xueyan Zhang,Bangyu Liu,Fang Zhang,Fang Chai
4-nitrophenol (4-NP) is a harmful aromatic compound to environment. The catalytic hydrogenation of 4-NP was considered as a profitable approach due to the valuable organic intermediate product. High efficiency catalysts are crucial. Herein, Cu–Au bimetallic nanospheres (BNSs) with sea urchin structure were fabricated by tuning the reaction condition and ratio of precursors. The Cu–Au BNSs exhibited effective catalytic activity in the reduction of 4-NP and K 3 [Fe(CN) 6 ]. The optimum catalyst can be determined as the Cu–Au BNSs prepared by 15 mL AA, 4-NP can be reduced to 4-AP in 150 s (k = 3.02 × 10 −2 s −1 ) with TOF value of 0.149 (s −1 ). The reusability of Cu–Au BNSs was evaluated with high effectiveness, the catalytic activity remained negligible loss over 18 cycles with efficiency over 95%, indicated their good reusability, which can be attributed to the synergistic effect of Cu–Au BNSs. The fabrication of bimetallic nanostructures provided an efficient approach to design efficient catalyst.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Lei Zhang,Qimei Li,Jiaqi Zhu,Heng Liu,Xueling Liu,Yi Wang,Guozhi Fan,Yanjun Huang,Likun Li
In this study, a novel composite bead (MPB-ALG) was prepared by encapsulating H 2 O 2 modified peanut shell-derived biochar (MPB) into alginate matrix through a facile method. The structure and properties of prepared materials were characterized using FTIR , BET, SEM, and XPS . Batch adsorption experiments were performed to compare the Cu(II) adsorption performance of MPB, plain alginate beads (ALG), and MPB-ALG. The effect parameters of the components, solution pH, contact time, initial concentration, and coexisting ions were studied systematically. The results showed that the maximum adsorption capacity of the optimized MPB-ALG-1 (MPB/alginate = 1:1 w/w%) was 117.4 mg g −1 at pH 5, which was much higher than that of MPB (37.4 mg g −1 ). The adsorption kinetics and isotherms data of Cu(II) on MPB-ALG-1 were well described by Elovich kinetic model and Freundlich adsorption isotherm. Compared with plain ALG beads, MPB-ALG-1 exhibited better reusability and anti-interference of coexisting ions. Finally, the adsorption mechanisms of Cu(II) on MPB-ALG-1 beads were revealed by FTIR and XPS analysis. The experimental results demonstrated that MPB-ALG-1 beads can be used as an environmentally friendly and efficient adsorbent for the removal of Cu(II) from wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FUEL
·
2023
·
IF 7.4
Chao Wang,Ying Liu,Kang Niu,Jia Li,Qing Cao,Xiuchen Zhao,Hongyang Li,Ningfei Wang,Baolu Shi
To improve the combustion efficiency of widely used micro-aluminum (μAl) particle, enhancing its ignition and combustion performances is a critical issue via breaking through the intrinsic Al 2 O 3 layer covering the Al-core. This study proposed a facile in-situ ‘one-pot’ electroless plating method to functionalize the surface of μAl particles with ternary-shelled nickel-phosphorus-copper alloy coating and furthermore investigated the thermochemical and ignition/combustion behaviors of energetic core–shell composites (defined as Al@Ni-P-Cu). The microstructure characterization results of Al@Ni-P-Cu demonstrated that a spherically distributed triple-shell Ni-P-Cu alloy with the thickness of 129 nm was tightly coated on μAl particle surface. Through TG-DSC analysis, the Al@Ni-P-Cu composites exhibited improved heat release (7597.7 J/g) and decreased initial oxidation temperature (814.3 °C) in comparison to that of μAl particle with 949.2 J/g and 960.1 °C, respectively. The Al@Ni-P-Cu exhibited extremely shorter laser ignition delay time of 36.3 ms under 1 MPa O 2 atmosphere, reducing by 86.86% compared with that of raw μAl particles (276.3 ms); and its maximum flame temperature could reach up to 1588.93 °C, increasing by 243.36 °C compared with that of μAl (1345.57 °C). The drastic improving performances were attributed to the synergistic effects of surface/interfaces reactions along with heat release in the core–shell structure, resulting in enhanced mass and heat transfer to facilitate the combustion of internal Al-core.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Jie Tao,Feihao Yang,Tao Wu,Junjiao Shi,Hai-Bo Zhao,Wenhui Rao
The frequent occurrence of fires caused by rigid polyurethane foam highlights the importance of its fire safety, however, the existing flame-retardant methods often seriously deteriorate the mechanical properties and thermal insulation of the foam. Here, we demonstrate a new idea for thermal insulation, flame retardancy, smoke suppression, and reinforcement of polyurethane foams only by incorporating a P/Cu-hybrid silica aerogel. This unique aerogel combines with the carbon-promoting action of P, catalytic attenuation of Cu, and the barrier effect of aerogels, thus leading to high smoke-suppressing and flame-retardant efficiency for polyurethane foam. At a low addition amount of 5 wt% aerogel, the total heat release, peak heat release rate, total smoke release, and toxic CO production of the composite foam are all significantly reduced. Interestingly, the aerogel-containing composite foam exhibits a special hierarchical porous structure, which enables lower thermal conductivity and higher thermal insulation than pure RPUF. Benefitting from the good compatibility and nano-enhancing effect of the aerogel, the compressive strength of the composite foam remarkable increase of 52.2%. This research offers an effective method for designing high-performance foam materials with high fire safety and low thermal conductivity, which has broad application prospects in the field of thermal insulation.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2023
·
IF 6.1
Xiaoyi Xie,Xiaofang Chen,Yaohui Wang,Maosen Zhang,Yuxiu Fan,Xiupei Yang
The design of nanozymes with high metal atom loading is of great significance to improve enzyme activity and is also the key to furthering the construction of highly sensitive colorimetric sensors. In this work, a colorimetric sensor for the quantitative analysis of tannic acid (TA) was developed based on two-dimensional carbon nanosheet carbon nitride (CN)-supported Cu single-atom nanozymes (Cu/CN). Cu/CN was synthesized by supramolecular preorganization and calcination , with an ultrathin nanosheet structure and a high density of Cu active sites, with a Cu loading of up to 14.3 wt%. Benefiting from the above characteristics, Cu/CN exhibits peroxidase-mimicking activity and excellent catalytic performance. Therefore, a colorimetric sensor was constructed for the fast and sensitive quantitative analysis of TA with good linearity in the range of 0.09–3.2 μM and a low detection limit of 30 nM. Furthermore, the sensor was successfully applied to the analysis of TA in tea samples of different varieties. This work sheds new light on the design of nanozymes with a high density of active sites and the analysis of TA in real environments.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF LUMINESCENCE
·
2018
·
IF 2.732
Ze Min Hu,Guang Tao Fei,Li De Zhang
The Cu-Ga-S/ZnS quantum dots (QDs) emitting green-to-red light are successfully synthesized by the conventional hot-injection method. In the preparation process, 1-dodecanethiol (DDT) is not only used as the solvent but also the sulfur precursor and ligand. Therefore, all reactants are additives, which can reduce solution contamination. The peak wavelength of Cu-Ga-S/ZnS QDs' emission can be tuned from 520 to 619 nm by changing Cu/Ga stoichiometry . And these quantum dots have narrow full-width at half maximum wavelength of about 75 nm. Furthermore, a white quantum-dot-based light-emitting diode is obtained by depositing the yellow Cu-Ga-S QDs on a blue InGaN chip.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Zhongxi Xie,Shuang Liang,Xuechao Cai,Binbin Ding,Shanshan Huang,Zhiyao Hou,Ping’an Ma,Ziyong Cheng,Jun Lin
Hypoxia and overexpression of glutathione (GSH) are typical characteristics of the tumor microenvironment, which severely hinders cancer treatments. Here, we design a novel biodegradable therapeutic system, O2–Cu/ZIF-8@Ce6/ZIF-8@F127 (OCZCF), to simultaneously achieve GSH depletion and O2-enhanced combination therapy. Notably, the doped Cu2+ doubles the O2 storage capacity of the ZIF-8 matrix, which makes OCZCF an excellent pH-sensitive O2 reservoir for conquering tumor hypoxia, enhancing the photodynamic therapy (PDT) efficiency of chlorin e6 (Ce6) under 650 nm laser irradiation. Moreover, the released Cu2+ can act as a smart reactive oxygen species protector by consuming intracellular GSH. The byproduct Cu+ will undergo highly efficient Fenton-like reaction to achieve chemodynamic therapy (CDT) in the presence of abundant H2O2. The accompanying O2 will further alleviate hypoxia. The in vitro and in vivo experimental data indicate that OCZCF could cause remarkable tumor inhibition through enhanced synergetic PDT and CDT, which may open up a new path for cancer therapy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2018
·
IF 6.434
Ying Liu,Yong Feng,Yunfei Zhang,Shun Mao,Deli Wu,Huaqiang Chu
In this study, the presence of Cu(II) ions was found for the first time to severely inhibit +-dimethyl phthalate (DMP) degradation by ozone due to the formation of the stable complex Cu(II)-DMP. However, 100% DMP removal was rapidly reached when ethylenediamine tetraacetic acid (EDTA) was added with a Cu(II)/EDTA molar ratio of 3:1. Subsequent studies indicated that Cu(II)-DMP is sequestrated by EDTA, then DMP was degraded and Cu(II) was removed by precipitation. The freshly formed Cu-EDTA 2− and organic nitrogen intermediates further decomposed O 3 into OH, which induced to the rapid degradation of DMP. The k obs of Cu-EDTA/O 3 were 9–10 times greater than the k obs of DMP removed by ozonation alone within 10 min. The reaction mechanism involved a OH generation was proposed. The OH and O 2 - are generated from the rapid reaction between ozone and EDTA. Acting as a more strongly negative species, the specific Cu(II) in Cu-EDTA complexes is more inclined to react with O 2 - to give Cu(I), accelerating the forward reaction to produce more OH. The synergistic removal of DMP and Cu(II) can be achieved after reaction. Therefore, this study provides an effective method to dispose metal ion and organic pollutant wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Research Express
·
2019
·Vol. 6
·期 4
·045514
·
IF 1.449
Jian Feng,Xiaosheng Yang,Rong Li,Xianjiong Yang,Hong Xu,Xiaolan Xi
Graphitic carbon nitride (g-C3N4) is the most stable allotrope of carbon nitride with a conjugated, two-dimensional polymer of s-triazine, which is considered as a promising photocatalyst in sustainable chemistry. The low surface area and quantum efficiency and fast electron-hole recombination of g-C3N4 restrict its practical application. The formation of two-dimensional mesoporous structure and the construction of proper semiconductor composites are two approaches to promote the effective separation of photogenerated exciton and reduce the charge transfer resistance, which is beneficial to restrain the recombination of exciton and improve photocatalytic hydrogen performance. In this work, two-dimensional mesoporous g-C3N4 nanosheets (MCNS) coupled with nonstoichiometric Zn-Cu-In-S (ZCIS) nanocrystals were synthesized by a hydrothermal method. The constructed ZCIS/MCNS composites possessed highly photocatalytic hydrogen evolution performance under visible light irradiation without any noble metal cocatalysts. The EIS spectra and transient photocurrent responses corroborated ZCIS/MCNS had higher separation and transportation efficiency of photogenerated electron and hole. The incorporation of ZCIS into MCNS reduced the charge transfer resistance and enhanced the charge transfer efficiency. As the result, the photocatalytic hydrogen evolution rate of ZCIS/MCNS was higher than those of pure ZCIS and MCNS. 10-0.2ZCIS/MCNS showed a highest H2 production rate of 12.3 μmol h−1 over 100 mg photocatalyst without cocatalysts. This work supplied a feasible strategy to construct ZCIS/MCNS composites for the exploitation of solar energy.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Sciences
·
2019
·
IF 3.556
Qing Wu,Li He,Zhong Wei Jiang,Yang Li,Ting Ting Zhao,Yu Han Li,Cheng Zhi Huang,Yuan Fang Li
Efficient removal of non-biodegradable and hazardous dyes from wastewater remains a hot research topic. Herein, a rationally designed a Cu(II)-based metal–organic gel (Cu-MOG) with a nanoporous 3D network structure prepared via a simple one-step mixing method was successfully employed for the removal of cationic dyes. The Cu-MOG exhibited high efficiency, with an adsorption capacity of up to 650.32 mg/g, and rapid adsorption efficiency, with the ability to adsorb 80% of Neutral Red within 1 min. The high adsorption efficiency was attributed to its large specific surface area, which enabled it to massively bind cationic dyes through electrostatic interaction, and a nanoporous structure that promoted intra-pore diffusion. Remarkably, the Cu-MOG displayed size-selective adsorption, based on adsorption studies concerning dyes of different sizes as calculated by density functional theory . Additionally, the adsorption performance of the Cu-MOG still maintained removal efficiency of 100% after three regeneration cycles. These results suggested that the Cu-MOG could be expected to be a promising and competitive candidate to conveniently process wastewater.
✓ 已验证
产品关联
DOI
PubMed
高影响因子