文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3697至3708个,产品总数347,550个

切换升序
Biosensors-Basel · 2026 ·Vol. 16 ·期 4 ·208 · IF 6.2

Novel Electrochemical Sensing Strategy for Organophosphorus Pesticide Residues

Mingzhuo Xu,Chen He,Jiajing Zhang,Hao Yang,Xiuzhong Wang

Organophosphorus pesticide residues (OPPs) pose significant threats to ecological systems and human health, and conventional detection techniques are cumbersome, time-consuming, and costly. Herein, a facile electrochemical biosensor has been constructed based on a methyl green/chitosan (MG/Chi) composite membrane-modified electrode for the selective detection of OPPs, using isazofos (Isa) as the model analyte. Experimental results demonstrated that Isa significantly decreases the redox peak current of the modified electrode in buffer solution, and a good linear relationship was observed between the change in peak current and Isa concentration within a specific range. This biosensor exhibits excellent anti-interference capability and high sensitivity, with a limit of detection (LOD) as low as 0.60 μM. Furthermore, it was successfully applied for the quantitative determination of OPPs in real food and environmental samples, which confirms its reliable practical applicability and potential for on-site monitoring.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Science Advances · 2026 ·Vol. 12 ·期 27 · IF 13.9

Electronic structure–driven sodiophilicity enables stable anode-free sodium batteries

Saisai Qiu,Haolin Zhu,Tengfei Jiang,Qiang Wu,Jiayue Peng,Canfu Zhang,Shijie Cheng,Jia Xie

Anode-free sodium metal batteries (AFSBs) offer high energy density and low cost by removing excess anodes, but their practical use is limited by low Coulombic efficiency and rapid capacity decay from irreversible sodium loss during repeated plating and stripping. Since all sodium in AFSBs forms during initial deposition, sodium nucleation and growth on current collectors strongly affect battery performance and safety. We identify the d-band center (ε d ) of collector surfaces as a unifying electronic structure descriptor for governing sodium-related behaviors. Tests and calculations show a volcano-type relationship between ε d and sodium nucleation overpotential, with intermediate ε d balancing sodium binding and diffusion for uniform, reversible deposition. We engineered a thin TiO 2 interphase to tune ε d optimally, enabling 4000 stable cycles (99.82% average Coulombic efficiency). AFSBs and pouch cells exhibit long life and energy density (325 watt-hours per kilogram) on a full positive/negative electrode mass basis, offering a generalizable framework for rational interface design in anode-free battery systems.

CAS / MDL: 111-96-6 21324-39-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Science Advances · 2026 ·Vol. 12 ·期 27 · IF 13.9

Unlocking 27.3% perovskite photovoltaics by interface-locked dual-molecule contact

Zuolin Zhang,Mengjia Li,Jike Ding,Yunxiao Liao,Hao Liu,Yong Ding,Boxin Jiao,Jiang Sheng,Feng Yan,Jiangzhao Chen,Cong Chen

Inverted perovskite solar cells (PSCs) remain constrained by nickel ion (Ni 3+ )–triggered interfacial redox chemistry and buried-interface defect landscapes that drive nonradiative loss and undermine operational stability. We report an interface-locked dual-molecule contact by coassembling [4-(3,6-dimethyl-9 H -carbazol-9-yl)butyl]phosphonic acid (Me-4PACz) with 9 H -carbazol-2-yl trifluoromethanesulfonate (CzOTf), in which π-π–stabilized cofacial packing rigidifies molecular orientation and strengthens interfacial electronic coupling for efficient hole extraction, whereas the sulfonate terminus offers broader lead (Pb)–related defect coordination and relieves interfacial tensile stress, collectively promoting higher-quality crystallization and a chemically stabilized buried interface. Enabled by this synergistic regulation, vacuum-flash-evaporated 1.53–electron volt PSCs deliver certified efficiencies up to 27.31%. The strategy also translates to perovskite/HJT-Si (silicon heterojunction) tandems with an efficiency of 32.84%. Furthermore, the corresponding 766–square centimeter large-area module achieved a power conversion efficiency of 21.54%. The CzOTf-modulated PSCs retain 92% of their initial efficiency after 2000 hours of continuous light soaking (ISOS-L-1). The CzOTf-modulated large-area module operated stably outdoors for 35 days without degradation.

CAS / MDL: 13478-00-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Science Advances · 2026 ·Vol. 12 ·期 26 · IF 13.9

A subnanoscale dynamic-integrated catalytic system for bioinspired photoelectrochemical ammonia synthesis

Yan Lin,Biao Yu,Hao Ren,Zhongtao Li,Qingda Liu,Xun Wang

Photoelectrochemical nitrogen (N) fixation to ammonia (NH 3 ) is a sustainable route for hydrogen storage yet limited by the stubborn N≡N bond and competitive interfacial reaction kinetics. Inspired by nitrogenase, we design single-atom iron (Fe)–doped tungsten oxide (WO 3 ) subnanowires as a bioinspired, dynamically integrated catalytic platform to systematically overcome these challenges: (i) The distorted lattice and asymmetric sites create a dynamically responsive catalytic center, where photoinduced valence-lattice oscillation drives electron delocalization, shifting the conventional N 2 adsorption mode and reaction pathway; (ii) the unique self-adhesive and film-forming properties enable robust, binder-free electrodes with maximized active-site exposure; and (iii) surface ligand engineering establishes a bioinspired microenvironment that selectively enriches N 2 and regulates proton access. This system achieves an NH 3 yield of 286 micrograms per milligram of catalyst per hour, a 24-fold improvement over conventional Fe-WO 3 nanowires, with stable performance over 30 cycles. This work demonstrates functionally integrated, bioinspired catalysis at the subnanoscale, offering a paradigm for efficient molecular conversion.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Science Advances · 2026 ·Vol. 12 ·期 27 · IF 13.9

Tetraphosphorylated phthalocyanine–based self-assembled monolayer stabilizes perovskite photovoltaics

Zhenzhen Qin,Yanbo Wang,Wenxiang Xiang,Siyuan Chen,Mengjiong Chen,Ziyang Zhang,Xiangfeng Luan,Yiyong Mai,Yongzhen Wu,Michael Grätzel,Liyuan Han

The self-assembled monolayer (SAM) has driven the rapid increase in the power conversion efficiency (PCE) of perovskite solar cells (PSCs). However, the operation stability of these PSCs under real conditions continues to be challenging. We developed an SAM based on phthalocyanine, which has a structurally robust framework with chemically stable bonds that enhance photostability. Tetraphosphorylation further enables the firmly locked phthalocyanine at the interface, which improves thermal stability, charge extraction, and assembly uniformity. Implementing this approach, a certified efficiency of 23.1% (stabilized 22.9%) for a perovskite solar module over a 20.3–square centimeter aperture area was achieved and the outdoor stability analysis was conducted following the ISOS-O-1 protocol, exhibiting no performance degradation throughout the entire outdoor aging test for 61 days, demonstrating reliable durability under real conditions.

CAS / MDL: 513-74-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Science Advances · 2026 ·Vol. 12 ·期 25 · IF 13.9

Highly conductive and ultrarobust elastic conductors for stretchable electronics

Tong Zheng,Shengxin Xiang,Qiongfeng Shi,Jianwei Li,Xiao Wei,Lei Liu,Chenhui Xu,Shengshun Duan,Pinzhen Chen,Xinkai Xie,Litao Sun,Jun Wu

Elastic conductors are vital for flexible electronics, but the high filler concentrations conventionally required to achieve metallic conductivity severely degrade mechanical properties. Here, we report a poor solvent–induced interfacial self-assembly strategy to fabricate robust elastic conductors. This approach yields a resilient top polymer domain and a bottom liquid metal (LM) polymer interpenetrating conductive domain. Consequently, the conductors achieve exceptional conductivity (3.33 × 10 6  siemens per meter), extreme stretchability (>1400% strain), and high toughness (>30 megapascals) at a low LM loading (~15% volume proportion). By regulating the self-assembly behavior of LM nanoparticles in elastomers, our method overcomes the traditional trade-off between electrical and mechanical performance. Demonstrating its practical utility, we constructed a wireless stretchable system for monitoring the temperature and motion of living organisms, highlighting its broad applicability in high-performance wearable and implantable electronics.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Biomaterials Research · 2026 · IF 9.8

Sonodynamic CoMg-Quercetin Nanozyme for Antibacterial Therapy and Multifunctional Bone Regeneration in Infectious Bone Defects

Bing Li,Yurong Xu,Jingyu Yan,Lihong Zhou,Chenying Cui,Kaifang Zhang,Kun Liu,Xiuping Wu

Infectious bone defects remain a serious clinical challenge because infection-associated inflammation markedly hinders bone regeneration. To address this complicated pathological condition, a porphyrin-doped cobalt-magnesium bimetallic quercetin-based sonosensitive nanozyme (CoMg-Que) was engineered to integrate antibacterial therapy, redox modulation, and tissue regenerative functions within a single platform. Upon ultrasound (US) irradiation, CoMg-Que was activated and efficiently generated reactive oxygen species (ROS) for sonodynamic antibacterial treatment. Following termination of US stimulation, its inherent superoxide dismutase- and catalase-like activities further removed excessive ROS, thereby relieving inflammatory responses and re-establishing redox homeostasis. In vitro experiments demonstrated that CoMg-Que effectively eliminated methicillin-resistant Staphylococcus aureus (MRSA) and exhibited favorable immunomodulatory, pro-angiogenic, and osteogenic properties. In an MRSA-infected rat calvarial defect model, CoMg-Que achieved an antibacterial efficiency of 95.24% and markedly enhanced bone regeneration, with the bone volume fraction reaching 26.76%. These findings indicate that CoMg-Que may serve as a promising multifunctional platform for infectious bone defect treatment through coordinated antibacterial, immunoregulatory, and regenerative activities.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Energy Material Advances · 2026 · IF 17.4

Molecular Additive Engineering for Perovskite Light-emitting Diodes via Generative Deep Learning

Yang Pu,Yifan Zhou,Jiangxiao Bai,Yatao Zou,Ruihao Chen,Yuanjun Jia,Hongqiang Wang,Weidong Xu,Zhe Liu

Additive engineering is an effective technique for alleviating intrinsic and interfacial defectsin perovskite light-emitting diodes (PeLEDs), yet discovering high-performance additivesremains challenging due to the vast chemical space and sparse experimental data. Here, weintroduce a generative deep learning framework to bridge this gap: leveraging a pre-trainedvariational autoencoder (VAE), we generate structurally similar additive candidates bysampling from the neighboring areas in the latent space of 142 known additives. This VAE-based approach, trained on large-scale molecule structure databases, mimics scientificintuitions of fine-tuning the existing molecular structure, and prioritizes chemical validityof the newly generated structure. Candidates are then screened via a multi-stage pipeline:an EQE prediction model, and descriptor-based evaluation (Gutmann’s donor number DN,Kamlet-Taft hydrogen-bond acceptor strength β) for defect passivation. We further validateour approach through experimental fabrication of FAPbI3 PeLEDs incorporating thegenerated additives. Among them, 1,3-dimethyltetrahydro-2(1H)-pyrimidinone (DMPU)leads to external quantum efficiency (EQE) of 16.0%. These results underscore theeffectiveness of using generative deep learning in discovery of molecular additive forperovskites.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Light-Induced Ultrafast Charge Transfer in Pt-Modified Cs2PdBr6 for Efficient Electrocatalytic Hydrogen Evolution

Baoyi Liu,Haibo Ning,Zhenghao Gong,Junsheng Chen,Bin Yang,Yuanyuan Feng,Huan Liu,Tianxin Bai,Qingkun Kong

Halide perovskites exhibit exceptional optoelectronic properties, including strong light absorption and efficient generation of photogenerated charge carriers. However, these advantages are extremely limited in electrocatalytic systems, and their full potential remains largely unexplored. In particular, the underlying mechanisms governing light-assisted electrocatalysis in perovskite materials remain poorly understood. Herein, a Pt-modified Cs2PdBr6 all-inorganic halide perovskite (Cs2PdBr6@Pt1.5) is designed, which achieves a low overpotential of 11 mV at 10 mA cm–2 with excellent water stability. Femtosecond transient absorption spectroscopy further demonstrates that the incorporation of Pt increases the population of transient species (<1 ps) and acts as an efficient charge separation channel, thereby promoting charge migration to catalytic active sites and enhancing hydrogen evolution reaction properties. Density functional theory (DFT) calculations reveal that electrons transfer from Cs2PdBr6 to Pt, and Pt-modified Cs2PdBr6 optimizes the adsorption energies of key reaction intermediates, thereby lowering the overpotential for water splitting. These findings highlight the potential of halide perovskites as a stable and efficient platform for light-assisted electrocatalytic water splitting and related energy conversion processes.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Catalysis · 2026 · IF 13.6

Free Hydroxyl-Boosted Electrocatalytic Oxygen Evolution through Reorganizing the Interfacial Water Structure

Yuhao Zhang,Chengrang Leng,Jing Zhang,Zhujun Li,Haixin Sun,Youcai Che,Baojie Li,Jingqiu Shang,Shuowen Bo,Xiuxiu Zhang,Shi He,Qinghua Liu

The structure and dynamics of interfacial water are pivotal in governing the kinetics and stability of electrocatalytic reactions, yet their targeted manipulation to resolve the persistent activity‒stability trade-off in acidic oxygen evolution reactions (OERs) remains a formidable challenge because of the elusive relationships among water networks, intermediates, and metal-site states. Herein, we developed a rational template-mediated Cr-promoted oxidation method to synthesize ultrafine Cr-doped RuO2 nanoparticles with precision. Cr dopants anomalously reside in an octahedral environment analogous to that of corundum-type Cr2O3 within the host rutile-type RuO2, a configuration stabilized by its favorable oxidation state and well-matched ionic radius. By use of advanced multimodal in situ spectroscopy, we decoupled the co-evolution of metallic active sites and the interfacial aqueous environment. We reveal that the surface high-valence Lewis-acidic Cr sites deliberately reorient interfacial water into an oxygen-down configuration, generating an abundance of weakly hydrogen-bonded, pre-activated free hydroxyl (Free-OH) water—an interfacial motif in oxygen electrocatalysis. This Free-OH-rich environment supplies ample *OH intermediates for direct O−O coupling via the oxide path mechanism. Importantly, the potential-driven heterolytic cleavage of water at hydroxyl-trapping Cr sites dynamically supplies electrons to adjacent Ru sites, preventing their over-oxidation and ensuring structural stability. This work demonstrates interfacial water engineering as a transformative strategy to transcend conventional catalyst-centric design for stable and efficient acidic OER.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF THE ELECTROCHEMICAL SOCIETY · 2014 ·Vol. 161 ·期 12 ·H730 · IF 2.859

Sn-Pb Hybrid Nanoparticle Decorated Mesoporous Carbon for Sensitive Stripping Detection of Cd (II)

Lina Xu,Ruizhuo Ouyang,Shuang Zhou,Haifeng Wen,Xin Zhang,Yang Yang,Ning Guo,Weiwei Li,Xin Hu,Zhuoyuang Yang,Lei Ouyang,Yuqing Miao

Novel Sn-Pb hybrid nanoparticle decorated mesoporous carbon (MPC) was successfully prepared on a glassy carbon electrode (GCE) and used for the anodic stripping measurements of Cd(II) via square wave Voltammetry. In the presence of MPC, the properties of Sn-Pb were dramatically improved including the ability of electron transfer, particle size and hydrophilicity, which played a significant role in achieving more preferable analytical performances of Cd(II) with Sn-Pb based sensor. After all the experimental parameters involved were carefully optimized, the proposed Sn-Pb/MPC based sensor was applied to the stripping determination of Cd(II), showing the best electrochemical behaviors by comparison with Sn, Pb and Sn-Pb modified electrodes. The synergic effect between Sn-Pb and MPC was believed to be the major factor leading to such improved electrochemical properties of Sn-Pb/MPC based sensor for Cd(II) analysis. In the concentration range of 0–140 μg L−1, the linear analytical curve for Cd(II) was achieved with correlation coefficient and detection limit calculated to be 0.9996 and 0.36 μg L−1 (S/N = 3), respectively. By using the standard addition method, Cd(II) ion in river samples was successfully determined with satisfactory recoveries higher than 100%. These results suggest that the proposed method can be applied as a simple, efficient alternative to monitor the heavy metals in water samples, compared with ICP based techniques.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Chem · 2025 ·Vol. 12 ·期 3 · IF 19.6

Robust B–H perdeuteration of polyhedral boron clusters with D2O by Pd(II)-catalytic electrophilic H/D exchange and intermolecular Pd migration

Yu-He Liang,Jia-Xin Kang,Yan Wang,Yi-Ge Li,Hou-Ji Cao,Qianyi Zhao,Xuenian Chen,Yan-Na Ma

The selective B–H functionalization of carboranes has received considerable attention because of their wide applications in functional materials, catalysis, and pharmaceuticals. Deuterium-labeling experiments and kinetic-isotope-effect experiments are two important tools for mechanistic studies on the selective B–H activation of carboranes. Thus, developing an effective method for the synthesis of perdeuterated carboranes is highly desirable. Herein, we present a practical method for synthesizing perdeuterated carboranes via Pd(II)-catalyzed B–H activation by using D 2 O as a deuterium source. This protocol features extraordinary functional-group tolerance, high levels of deuterium incorporation, and ease of scaling. Mechanistic studies illustrate that the deuteration reaction proceeds via Pd(II)-catalytic electrophilic H/D exchange and subsequent intermolecular Pd migration. The same degree of deuterium incorporation across all boron vertices indicates that the Pd-migration step is faster than the electrophilic palladation step. Additionally, the versatility of this method is reflected in the deuteration of other boron clusters.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。