文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3709至3720个,产品总数347,550个

切换升序
Nature Communications · 2026 · IF 18.1

Trifunctional electrocatalyst with accurate surface reconstruction for zinc-air batteries and water electrolyzers

Yuan Lingjie,Huang Wei-Hsiang,Tang Zheng,Hsu Su-Yang,Fan Yalei,Wang Beibei,Xu Mingkai,Chen Tsung-Yi,Yeh Min-Hsin,Chen Jin-Ming,Hu Zhiwei,Zhu Yinlong

Exploiting cost-effective trifunctional electrocatalysts toward oxygen evolution reaction, hydrogen evolution reaction and oxygen reduction reaction is important for sustainable energy conversion and storage devices yet challenging. Here, we report a single-phase trifunctional electrocatalyst Sr 2 CoRuO 6-δ with well-defined super-exchange double perovskite structure, which can efficiently catalyze oxygen evolution, hydrogen evolution and oxygen reduction under alkaline conditions. As an air electrode, Sr 2 CoRuO 6-δ delivers high peak power density of 216 mW cm −2 , high specific capacity of 748 mAh g −1 and long lifespan up to 1000 h for liquid rechargeable zinc-air batteries, as well as broad temperature and deformation adaptability for solid-state flexible zinc-air batteries. Furthermore, an anion exchange membrane water electrolyzer employing Sr 2 CoRuO 6-δ as both cathode and anode requires a cell voltage of 1.90 V at the current density of 1 A cm −2 and shows a stable and rapid response when coupled with fluctuating solar electricity. Combining complementary in-situ and microscopic techniques, spatiotemporal surface reconstruction behavior of Sr 2 CoRuO 6-δ under varied reactions is comprehensively investigated and true active components are identified.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
EBioMedicine · 2026 · IF 11.2

The complement C3-microglial axis in depression of Parkinson's disease: from mechanism to therapeutic intervention

Qiao Yin,Mengyang Ding,Yurui Tang,Yuwan Qi,Yuan Qin,Hong Jin,Yang Li,Jili Bao,Shuyang Ma,Ying Li,Haozhe Ding,Xinyu An,Enyou Qiao,Yan Tang,Qilin Zhang,Linna Wang,Jianfeng Shao,Jianfeng Feng,Li-Fang Hu,Jing Wang,Pan Fang,Weifeng Luo,Qifei Cong

Background Depression is a common and early non-motor symptom of Parkinson's disease (PD) with significant sexual dimorphism, yet its underlying molecular mechanisms remain poorly understood. This study aimed to elucidate the sex-specific plasma proteomic profiles of depression in patients with PD (DPD) and to investigate the role of complement-mediated synaptic pruning in its pathophysiology. Methods Plasma proteomic analysis was performed on data from the Parkinson's Progression Markers Initiative (PPMI) and an independent validation cohort, stratified by sex. Functional enrichment analyses identified dysregulated pathways. A chronic MPTP/probenecid-induced mouse model of PD was used to validate findings. Behavioural tests assessed motor and depressive-like phenotypes. Proteomic, biochemical, and imaging techniques were used to evaluate protein expression, synapse density, and microglial phagocytosis. The therapeutic mechanism of Botulinum Neurotoxin A (BoNT/A) on DPD was investigated in wild-type, C3 −/− and C3aR −/− mice and in microglial cultures. Findings Proteomic profiling revealed both conserved complement-driven immune dysfunction and profound sex-divergent molecular perturbations underlying PD and DPD. Complement and coagulation cascades were consistently upregulated in both sexes. In MPTP-treated male and female mice, hippocampal complement components (C1Q, C3, C3aR) and downstream signalling (p-STAT3, p-P65) were elevated, accompanied by microglial synapse phagocytosis and depressive-like behaviours. Genetic deletion of C3 rescued both MPTP-induced motor and depressive-like behavioural deficits and prevented hippocampal synaptic loss associated with microglial synaptic engulfment. BoNT/A treatment alleviated depressive-like behaviours and reduced microglial synaptic engulfment in an MPTP model; these therapeutic effects were abolished in C3 −/− and C3aR −/− mice. Single-cell RNA sequencing and in vitro phagocytosis assay confirmed that BoNT/A modulated phagocytosis-related microglial subclusters. Interpretation DPD exhibits distinct sex-specific immune signatures, with convergent complement pathway activation driving microglial synaptic pruning and depressive symptoms. The antidepressant effect of BoNT/A is mediated through inhibition of the C3–C3aR signalling axis. These findings highlight the potential for sex-stratified diagnostics and complement-targeted therapies for depression in patients with PD. A key limitation is that our clinical analyses were constrained by limited validation cohort sizes, and mechanistic studies were limited to male mice, which may restrict the generalisability of our findings to female populations. Funding National Natural Science Foundation of China, Key Project of the Natural Science Foundation of Jiangsu Provincial Higher Education Institutions, Project of Biomedical Basic Research Center (BBRC) of Jiangsu, Clinical Research Center of Neurological Disease in The Second Affiliated Hospital of Soochow University, Project of MOE Key Laboratory of Geriatric Diseases and Immunology, Jiangsu Key Laboratory of Drug Discovery and Translational Research for Brain Diseases; The Lingang Laboratory fund; Shanghai Science and Technology Innovation Sailing Special Project, and Shanghai Municipal Science and Technology Major Project; Zhejiang Provincial Natural Science Foundation of China.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Cell Reports Medicine · 2026 · IF 14

Commensal Cutibacterium acnes-derived indolelactic acid safeguards skin barrier function through the aryl hydrocarbon receptor

Shan Zhang,Fang Li,Xiaoqiang Xu,Tianze Yu,Yang Liu,Xiaokai Fang,Yuan Zhou,Beilei Xu,Yu Zhang,Yang Luo,Qianjin Lu,Xiaochun Liu,Wei Li,Xu Yao

Skin microbial dysbiosis is a key characteristic of atopic dermatitis (AD). Although Cutibacterium acnes ( C. acnes ) is the most abundant bacterium in the skin microbiota, its precise functions in AD remain unclear. Here, whole-genome sequencing of C. acnes isolates reveals strain-level genomic and functional heterogeneity between AD patients and healthy individuals. Metabolomic profiling identifies reduced indolelactic acid (ILA), a tryptophan metabolite, in AD skin and in cultures of AD-associated C. acnes strains . In murine models of epidermal-barrier-damaged and AD-like dermatitis, topical ILA application activates the aryl hydrocarbon receptor (AhR) pathway in keratinocytes, upregulating tight junction proteins and suppressing interleukin (IL)-33 to restore barrier integrity and mitigate dermatitis. A proof-of-concept clinical trial confirms ILA’s efficacy in reducing transepidermal water loss and alleviating AD symptoms. Our study establishes C. acnes -derived ILA as a crucial regulator of skin barrier repair via AhR signaling, offering therapeutic potential for AD. Clinical trial registration: ChiCTR2400090988.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Metals · 2026 ·Vol. 16 ·期 7 ·738 · IF 3.1

A Two-Step Strategy of Surface Modification and Low-Temperature Sintering for Reliable Cu/Graphite Joining

Zimeng Zhang,Chenghao Zhang,Qian Cheng,Chun Li,Xiaoqing Si,Zongjing He,Lin Cao,Chengxian Li,Shisheng Huang,Jun Wang,Yang Liu

The reliable joining of graphite and Cu holds significant promise for applications in electronic heat dissipation and sliding electrical contacts. However, the substantial differences in their physicochemical properties, poor wettability, and mismatch in coefficients of thermal expansion often result in low joint strength. In this study, a two-step joining strategy combines surface modification with low-temperature sintering, and this is proposed for fabrication of Cu/graphite joints. First, the graphite surface is modified using an AgCuTi active filler alloy under vacuum conditions. Ti preferentially segregates at and reacts with the graphite interface, leading to the formation of an Ag-Cu eutectic modified layer on the graphite surface. Subsequently, low-temperature joining of the modified graphite to a Cu substrate is achieved via a hot-pressing sintering process using a Ag paste. In the sintered joint, the Ag sintered layer forms sound metallurgical bonds with both the Cu substrate and the graphite-modified layer. When the sintering temperature is 250 °C, the joint exhibits a shear strength of 30 MPa, which is significantly higher than that of a directly brazed joint. This strategy effectively reduces thermal residual stress in the joint during cooling and shifts the failure location from the brittle graphite substrate to the ductile Ag sintered layer, thereby substantially enhancing the mechanical performance.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
IEEE SENSORS JOURNAL · 2026 · IF 4.5

Droplet Viscometry on a Digital Microfluidic Platform via Impedance Sensing

Yong Le,Yan Huang,Shengyou Zhang,Congwei Liao,Shengdong Zhang

Viscosity is an important transport-related parameter in chemical and bioanalytical systems, yet its measurement in miniaturized platforms often relies on external optical tracking or dedicated sensing structures, which can complicate integration with programmable digital microfluidics. Here, we report a calibration-based impedance sensing method for droplet viscosity estimation on an electrowetting-on-dielectric digital microfluidic (EWOD-DMF) platform. A small high-frequency excitation is applied to the top plate, while the bottom electrode is used simultaneously for droplet actuation and electrical readout. As the droplet moves across the sensing electrode, the time-varying droplet–electrode overlap produces an impedance response, and a transit-time metric is extracted from the normalized amplitude trajectory. The transit time measured by impedance sensing was validated against imaging-based overlap tracking. Using glycerol–water mixtures with viscosities ranging from 1.01 to 39.23 mPa·s at 25 °C, we obtained a linear calibration between transit time and viscosity (R² = 0.99789). The method requires neither additional on-chip sensing structures nor camera-based readout during operation, and can be readily integrated with programmable EWOD-DMF workflows. This work demonstrates a calibration-based, low-volume electrical droplet viscosity estimation strategy within the validated range of 1.01–39.23 mPa·s for Newtonian glycerol–water mixtures under the specified EWOD-DMF operating conditions. Extension to complex or non-Newtonian sample systems will require application-specific calibration and validation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
IEEE Transactions on Components Packaging and Manufacturing Technology · 2026 · IF 3.3

Fabrication of High-Conductive and Reliable Embedded Circuits in Glass Substrates via Pressure-Assisted Cu Nanoparticle Sintering

Guannan Yang,Dongchang Ma,Junyi Lu,Weiqiang Li,Chao Tang,Wenzhe Wang,Qiyuan Zhang,Yu Zhang,Guanghan Huang,Chengqiang Cui

This study presents a fabrication method of high-conductive and reliable embedded circuits in glass substrates through pressure-assisted sintering of copper nanoparticle paste. First, inverted trapezoidal grooves were created on glass substrates by picosecond laser modification and hydrofluoric acid etching. Then Cu particles paste with 250 nm size and 75% solid content was filled in the grooves through a two-step filling process. Finally, the samples were hot-press sintered to form conductive circuits. Using the method, embedded circuits with linewidth of 30~100 μm were fabricated on glass substrates, with a porosity of only 7.6% and a resistivity as low as 8.53 μΩ·cm. The embedded circuit structure enabled the precise linewidth control, and also enhance the mechanical interlocking of the circuit with superior adhesion, demonstrated by <5% resistance change and no detachment after tape peel tests. Compared to conventional electroplating method for circuit fabrication on glass substrates, this method eliminates the chemical residues and improves the reliability, offering a scalable solution for circuit fabrication on advanced glass substrates for 5G/6G RF components and optical modules.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION · 2026 · IF 3.3

Three-Dimensional Biomimetic Interface Engineering for Synergistic Enhancement of Interfacial and Insulation Properties in AFEP

Jun Xie,Leixin Gao,Guowei Xia,Zhaohua Zhang,Qiqiang Chen,Qikai Wang,Chunying Qiao,Qing Xie

Aramid fiber (AF) is widely used in insulating pull rods for gas-insulated switchgear (GIS) due to its excellent insulation and mechanical properties. However, its smooth surface and high chemical inertness lead to weak interfacial bonding with the epoxy matrix, resulting in interfacial failure that severely compromises the insulation performance of the components. Inspired by the interlocking mechanism between plant roots and soil, this study designs a biomimetic “root hair”-like three-dimensional skeleton structure at the interface. Constructed through longitudinal intermolecular N-N covalent crosslinking of aramid nanofibers (ANFs), this structure enables simultaneous enhancement of the insulation properties and interfacial bonding strength of aramid fiber/epoxy composites. The results show that the three-dimensional skeleton structure at the interface significantly improves interfacial bonding through mechanical interlocking, increasing the interlaminar shear strength (ILSS) by 57.24% and the transverse fiber bundle tensile (TFBT) strength by 33.31%. This substantial improvement in interfacial bonding further enhances the breakdown strength of the modified 0.5 AFEP sample by 51.15% and its flashover voltage by 31.26%. Based on surface potential decay measurements, surface and bulk trap distribution analyses, and molecular dynamics simulations, the regulation mechanism of the three-dimensional skeleton structure on charge transport behavior and its role in interfacial enhancement are systematically revealed, elucidating the mechanisms underlying the improved insulation properties and interfacial bonding strength.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Biology-Basel · 2026 ·Vol. 15 ·期 13 ·1074 · IF 4.3

The Distinct Electrophysiological Mechanisms in the Cortico-Striatal Circuit of LID Rats

Tingting He,Hongyu Wang,Haoqi Ni,Yuting Sun,Xiang Gao,Fan Zhou,Jianmin Zhang,Kedi Xu

Simple SummaryParkinson’s disease is a neurodegenerative disorder characterized primarily by motor dysfunction. The main treatment, levodopa, works well at first but often causes severe, uncontrollable movements after long-term use, a condition called levodopa-induced dyskinesia (LID). The underlying neural mechanisms of LID are not yet fully understood. In this study, we used a rat model to investigate how neuronal activity is altered following chronic levodopa treatment. We recorded electrical signals from two brain areas involved in the motor cortex and the dorsolateral striatum in rats with this condition. Our results showed abnormal patterns of neural activity in both regions, including altered neuronal firing rates and disrupted interregional coordination. Importantly, we discovered that the coupling strength between M1’s low-frequency phase and DLS’s high-frequency amplitude exceeds that of the reverse pairing (DLS phase–M1 amplitude) in the LID model, which may reflect an electrophysiological feature associated with dyskinesia. Our findings contribute to a better understanding of the neural mechanisms underlying LID and suggest that this specific communication pathway may represent a promising therapeutic target for future interventions.Levodopa-induced dyskinesia (LID) is a severe motor complication associated with long-term levodopa (L-DOPA) treatment for Parkinson’s disease (PD). Its underlying mechanisms remain unclear, and candidate biomarkers lack consistency. To investigate cortico-striatal network alterations associated with LID, we simultaneously recorded single-neuron spikes and local field potentials (LFPs) from the dorsolateral striatum (DLS) and the primary motor cortex (M1) in LID rats. Our results showed that in the DLS, the LID group had a greater number of putative fast-spiking interneurons (FSIs) with lower firing rates, and fewer putative medium spiny neurons (MSNs) with higher firing rates. In M1, pyramidal neurons were fewer but fired faster, while interneurons were more numerous with no change in firing rate. Although gamma power increased and delta power decreased in both regions in LID rats, delta-gamma phase-amplitude coupling (PAC) was present in the DLS but absent in M1. Furthermore, cross-regional PAC analysis revealed significantly stronger coupling between the low-frequency phase of M1 and the high-frequency amplitude of the DLS than in the opposite direction, indicating an asymmetric pattern of cortico-striatal coupling in LID. These findings demonstrate region-specific alterations in neuronal activity and oscillatory coupling associated with LID and suggest that asymmetric cortico-striatal PAC may serve as a promising electrophysiological marker for characterizing abnormal network dynamics underlying dyskinesia.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Gels · 2026 ·Vol. 12 ·期 6 ·555 · IF 6.4

Robust Polyurethane Hydrogels Based on Dynamic Disulfide Bonds and Pendant Tertiary Amines with Room-Temperature Self-Healing and pH Responsiveness

Xia Ding,Bing Yang,Xinyi Si,Lei Ni,Chao Fang,Zhaosheng Hou

Hydrogels have garnered significant attention due to their tunable structures and broad applicability in biomedical and smart materials. However, achieving a balance between excellent mechanical performance and multifunctionality remains a major challenge. In this study, a series of multifunctional polyurethane hydrogels (PUGs) was developed by integrating dynamic disulfide bonds and pendant tertiary amine groups into poly(ethylene glycol)-based networks using a solvent-exchange method. Structural characterization confirmed the successful formation of a crosslinked porous network. The hydrogels demonstrated remarkable mechanical properties, with PUG–II exhibiting a tensile strength of 448 kPa and an elongation at break of 489%, as well as exceptional compressibility (371 kPa at 90% strain) and fatigue resistance. Meanwhile, the PUGs displayed efficient room-temperature self-healing with a healing efficiency of up to 94.5%. The reversible protonation of tertiary amine groups imparted pronounced pH-responsive swelling behavior, with the equilibrium swelling ratio of PUG–I at pH 2.0 being 5.8 times higher than that at pH 12.0. This study provides a promising strategy for developing PU-based hydrogels that combine robust mechanical performance and multifunctionality, offering potential for advanced smart material applications.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
IEEE SENSORS JOURNAL · 2026 · IF 4.5

Temperature-Compensated Relative Humidity Sensor for Respiration Monitoring Based on Functionalized Hollow-Core Bragg Fiber Cavity

Wenyu Wang,Shaoxiang Duan,Wentao Li,Yiwei Cao,Yixi Chen,Lingyi Xiong,Hao Zhang,Bo Liu

Respiration is a crucial physiological process in the human body, and accurate relative humidity (RH) based respiratory monitoring requires effective temperature compensation. Here, we propose a polyvinyl alcohol (PVA)–graphene oxide (GO) composite film functionalized single-mode fiber (SMF)-hollow-core Bragg fiber (HCBF)-SMF hybrid fiber sensor that integrates anti-resonance (AR) and Fabry-Pérot interferometer (FPI) mechanisms, enabling RH sensing with in-situ temperature compensation. For the AR mechanism, the proposed AR-FPI sensor achieves an RH sensitivity of 68.2 pm/%RH over 36-96 %RH and a temperature sensitivity of 18.2 pm/°C over 25-60 °C. In contrast, the FPI mechanism exhibits a negligible RH response but a measurable temperature response of 1.2 pm/°C, allowing it to serve as an internal temperature-compensation channel for RH measurement. Based on these findings, a sensitivity coefficient matrix was constructed to eliminate the crosstalk between RH and temperature. The sensor exhibits reliable RH sensing performance over a broad RH range, good linearity and stability, an estimated limit of detection (LOD) of 0.22 %RH, and response/recovery times of 14/16 s, demonstrating its feasibility for non-contact respiration monitoring through breathing-induced RH variations.

CAS / MDL: 9002-89-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Science Advances · 2026 ·Vol. 12 ·期 25 · IF 13.9

Synergistic anion-cation descriptor for bidirectional electrocatalyst in Li-CO2 battery

Xingwu Zhai,Yuchun Liu,Mi Luo,Tianchen Wei,Hang Wang,Jing Zhang,Leyi Su,Zhaodi Fan,Zhixin Sun,Zhuohui Zhang,Liang Wu,Hongjun Zhang,Bangjiao Ye,Min Zhou

The slow kinetics of lithium carbonate (Li 2 CO 3 ) nucleation/decomposition hinder voltage gap minimization in lithium-carbon dioxide (Li-CO 2 ) batteries. Although symmetry-broken cation motifs can enhance reactivity, designing optimal catalysts remains challenging. Moving beyond cation-centric views, we recognize anions as active participants that regulate charge and stabilize intermediates, yet their degradation worsens the activity-stability trade-off. To address this, we develop a dual Φ descriptor quantifying anion-cation orbital coupling and reconstruction energy. It establishes a volcano correlation with the voltage gap in metal sulfides, showing that symmetry-broken units optimally balance binding and stability. Guided by this, we synthesize oriented WS 2 rich in C 4v configurations, achieving a record-low gap of 0.76 volts and superior cycling (>1268 hours) among dichalcogenides. This work shifts the paradigm from cation-only tuning to synergistic anion-cation design, repositioning anions as co-catalytic architects. By linking orbital insights to performance, we provide a universal descriptor for developing efficient, stable Li-CO 2 batteries.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Science Advances · 2026 ·Vol. 12 ·期 24 · IF 13.9

Conformal, transparent, and efficient MXene grid antennas for flexible wireless electronics

Hengpei Su,Qiang Xiao,Rui Jia,Zhihua Xia,Jingyu Wang,Tianyue Xu,Chendong Zhao,Chunjie Li,Yubin Cao,Chuanfang Zhang

Next-generation internet of things (IoT) wireless electronics require antennas that are conformal, transparent, and electromagnetically efficient, yet these attributes form an impossible trinity. Here, we realize the first Ti 3 C 2 T x MXene–based conformal, transparent, and high-performance antenna through an optimized nanoimprint lithography-blading technique. Nanoimprinted MXene grid transparent conductive film (TCF) achieves an exceptional balance of low sheet resistance (4.32 ohms per square) at high transmittance (~89.1%) with promising flexibility. Two representative scenarios in IoT networks are selected to demonstrate the versatility of this TCF. For personal devices, the efficient MXene transparent dipole antenna enables a quasi-transparent wireless wearable device for long-distance and real-time communication (>30 meters). For fixed infrastructure, MXene-based digital coding metasurface enables high-quality wireless communication, maintaining a low bit error rate (~0.15%) even in a curved state. This work establishes MXene as a versatile platform that successfully merges conformal transparency and high electromagnetic performance, paving the way for next-generation imperceptible IoT wireless systems.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。