MICROCHIMICA ACTA
·
2022
·Vol. 189
·期 3
·1-10
·
IF 6.408
Wang Lijun,Zhou Hong,Wu Xue,Song Yanfei,Huang Yukun,Yang Xiao,Chen Xianggui
A novel colorimetric aptasensor has been developed for highly sensitive tetracycline (TC) detection based on the peroxidase-like activity of Fe 3 O 4 @Cu nanoparticles and “sandwich” oligonucleotide hybridization. The Fe 3 O 4 @Cu nanoparticles with high peroxidase-like activity were successfully synthesized under mild conditions. Then, a “sandwich” oligonucleotide hybridization probe (a short amino-modified complementary sequence of a portion of the TC aptamer (cDNA1), TC aptamers, and a long complementary to 5′ terminal TC aptamer sequence (cDNA2)) was created in 96-wells plates via DNA hybridization in the absence of TC from the detection system. The unique “sandwich” oligonucleotide hybridization probe adsorbed large numbers of Fe 3 O 4 @Cu nanozymes while further enhancing its peroxidase-like activity. Based on the 3,3′,5,5′-tetramethylbenzidine (TMB)-hydrogen peroxide (H 2 O 2 ) reporting system, the blue color of the solution decreased linearly with the increase of TC concentration, ranging from 10 −3 to 10 3 μg/L with an ultralow limit of detection (LOD) of 0.91 ng/L (2 pM). The proposed method was successfully applied to detect TC in spiked milk samples, with recoveries of 81.8 to 112%, demonstrating the excellent potential for highly sensitive TC detection in milk. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Molecular Catalysis
·
2022
·
IF 5.089
Kuan Wang,Zhe Cao,Junlei Wang,Zhen-Hong He,Dan Wang,Rong-Rong Zhang,Weitao Wang,Yang Yang,Zhao-Tie Liu
The development of non-precious metal catalysts in heterogeneous catalytic processes is of great importance to the hydrogenation of quinolines for both theoretical and industrial applications. Herein, an effective non-precious metal catalyst, 58% Fe 4 Ni 6 Cu 5 /MCM-41, was developed to catalyze the hydrogenation of quinolines under the green and mild conditions, which can achieve 97.5% conversion and exceeding 98% selectivity to tetrahydroquinoline in solvent-free at low temperature of 50 °C. Moreover, the acceptable results of the reusability and gram scale-up experiments proved an industrial application potential of the as-prepared catalyst. Meanwhile, in cyclohexane system, 58% Fe 4 Ni 6 Cu 5 /MCM-41 catalyst can further realize a higher activity of the hydrogenation at a lower temperature of 40 °C, achieving 98.2% conversion and 98% selectivity to tetrahydroquinoline. The existence of Fe-Ni and Ni-Cu alloys in Fe 4 Ni 6 Cu 5 /MCM-41 catalyst was demonstrated by TEM, XRD, XPS, H 2 -TPD, and Raman spectroscopy. And, Fe-Ni and Ni-Cu alloys can be well dispersed onto MCM-41 molecular sieves. For Fe 4 Ni 6 Cu 5 /MCM-41 catalyst, quinoline molecules can be adsorbed by Fe 3+ species on the surface of Fe-Ni alloy through the coordination, while hydrogen molecules can be adsorbed and activated by Ni-Cu alloy. Under the synergism of Fe-Ni and Ni-Cu alloys, the highly effective and selective hydrogenation of quinolines was achieved at low temperature and in solvent-free system. The present approach offers a prospective idea for building non-precious metal catalysts to realize the effective hydrogenation of N-heterocyclic compounds under mild conditions.
✓ 已验证
产品关联
DOI
高影响因子
Agronomy-Basel
·
2023
·Vol. 13
·期 5
·1282
·
IF 3.7
Jing Zhao,Lin Wang,Gang Chu
Attention has been paid to the application of biochar in the remediation of heavy metal contamination in soils. In this study, two modification methods, bleaching and activation, were used to enhance the biochar sorption of Cu(II) and Pb(II). Multiple techniques, including XPS, FTIR and13C NMR, were applied to investigate the properties of bleached and activated biochars. Combined with density functional theory (DFT) calculations, structural changes in the biochars and the main mechanism of Cu(II) and Pb(II) sorption were discussed after modification. The bleached biochar without non-condensed aromatic C possessed many oxygen-containing groups due to oxidation. In contrast, activation increased the specific surface area (SSA) and removed the carboxyl groups. Both modifications had an excellent effect on sorption by high-temperature biochars, especially the bleaching treatment. The bleached and activated biochars exhibited superior Pb(II) sorption compared with Cu(II) due to the larger electron cloud configuration of Pb(II). The significantly positive correlation of theKdvalues with the COOH/C=O content indicated that the oxygen-containing groups were responsible for Cu(II) and Pb(II) sorption. The DFT calculation demonstrated a higher energy for the cation–π interaction than for the complexation for Cu(II) sorption, whereas the opposite case was observed for Pb(II) sorption. The complexation and cation–π interaction were the main mechanisms of Cu(II) and Pb(II) sorption. This study provides important guidance for the application of modified biochars in the sorption of heavy metals in the environment.Keywords:biochar chemical modification;heavy metal;sorption;complexation;cation–π interaction
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Jingyi Zhu,Yixin Zhu,Wenjun Zhou
Oxygen vacancies (OVs) were introduced into Ni-based layered double hydroxides (LDHs) through Cu doping, and the catalytic performance of the resulting Ni x Cu-LDHs were investigated for peroxymonosulfate (PMS) activation and methyl 4-hydroxybenzoate (MeP) degradation. Compared with that of Ni-LDH, the catalytic performance of Ni x Cu-LDHs were significantly enhanced and increased with increasing OV content in the catalysts, indicating that Cu doping introduced OVs into Ni x Cu-LDHs and greatly improved their catalytic activity with PMS. Quenching experiments and EPR analyses confirmed that oxidation processes dominated by superoxide radicals (O 2 •− ) and singlet oxygen ( 1 O 2 ), rather than sulfate radicals (SO 4 •− ) or hydroxyl radicals (•OH) used by traditional LDH catalysts, were responsible for MeP degradation by Ni 15 Cu-LDHs. In addition, quenching experiments with different systems showed the fate of reduced SO 4 •− and •OH, and demonstrated that O 2 •− and 1 O 2 concentrations grew with increasing OV content, confirming that the presence of OVs affected the process of PMS activation. Notably, O 2 •− mainly originated from adsorbed oxygen or dissolved oxygen (DO) by acquiring electrons from OVs in Ni 15 Cu-LDHs, since OVs possess abundant localized electrons. Consequently, an OV-mediated oxidative mechanism was proposed for Ni 15 Cu-LDHs/PMS. This study provides new clues for enhancing the catalytic performance of LDH catalysts by introducing OVs via metal doping in PMS-based AOPs systems.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2021
·
IF 6.057
Dandan Zhao,Yijun Huang,Huixiang Ouyang,Bingfang Shi,Suping Li,Shengyu Chen,Shulin Zhao
Changing a detection analyte into a colored material is a key challenge for visual discrimination of isomers. In this work, a novel fluorescent probe incorporating Cu-doped carbon dots (Cu-CDs), for the first time, was developed for naked-eye discrimination of phenylenediamine isomers and highly sensitive ratiometric fluorescence detection of H 2 O 2 . In this strategy, Cu-CDs were synthesized by a facile hydrothermal approach using citric acid , formamide , and CuCl 2 as reactants. The prepared Cu-CDs exhibited outstanding peroxidase-like activity and stability. Consequently, a chemosensor platform based on Cu-CDs was constructed to enable naked-eye discrimination of phenylenediamine isomers through the H 2 O 2 -mediated oxidation reaction. Moreover, a Cu-CDs-based ratiometric fluorescence sensor was proposed as a means to sensitively detect H 2 O 2 with a detection limit of 5.0 nM. The sensor was further employed for monitoring H 2 O 2 in human serum, indicating its potential applications in other biologically related study.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2021
·
IF 5.816
Mengmeng Wang,Jinshan Yang,Xiao You,Jingyi Yan,Yusheng Ding,Xiangyu Zhang,Shaoming Dong
Designing highly active and selective electrocatalysts for converting CO 2 into value-added chemicals and fuels by electrochemical method is still a challenge. Herein, we have successfully fabricated a lotus-like morphology of Sn/Cu alloy on carbon fiber cloth via a facile electrodeposition method followed by air-dried treatment. Owing to the presence of Sn 2+ and Cu + on the surface of Sn/Cu alloy, this bimetallic Sn/Cu electrode exhibits the outstanding FE of formate with a maximum value of 95.81% at −1.07 V versus RHE , and the total current density at −0.97 V versus RHE keeping unchanged at 33.78 mA cm −2 under the 20 h electrolysis even with the replacement of electrolyte. This work provides an effective strategy for highly boosting the selective production of formate from electrochemical CO 2 reduction by stabilizing the intermediate valence of bimetallic alloy.
✓ 已验证
产品关联
DOI
高影响因子
SOLID STATE SCIENCES
·
2026
·
IF 3.6
Haixia Wang,Chuang Liu,Yilei Sun,Zeda Meng,Won-Chun Oh
Successful synthesis of copper-metal organic framework (Cu-MOF) and carbon nanotube (CNT)-doped CNT/Cu-MOF composites • Stability and CO 2 reduction activity of the as-prepared materials with electrochemical performance • Catalytic properties of the highest double-layer capacitance (3.25 mF cm -2 ) with a maximum current density reaching -18 mA cm -2 • Total Faradaic efficiency for CH 4 and CO reached 21% In this study, Cu-MOF and CNT/Cu-MOF composite materials (CNT/Cu-MOF-0.3, CNT/Cu-MOF-0.5, CNT/Cu-MOF-1) modified by doping with different proportions of CNT were successfully synthesized via the solvothermal method. Through analyzing the linear sweep voltammetry curve, electrochemical activity, electrochemical impedance spectroscopy, and electrocatalytic selectivity bar graph, we found that the catalyst with a CNT doping ratio of 0.5 exhibited the lowest overpotential, its maximum current density reaches -18 mA·cm -2 , and demonstrating the best catalytic performance among the four materials. Its double-layer capacitance was the highest, reaching 3.25 mF·cm -2 with a combined Faradaic efficiency of 21% for CH 4 and CO at -1.6V (vs. RHE). Download: Download high-res image (202KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Jie Yang,Xinyu Li,Yujia Xu,Lin Chen,Shan Wang,Shan Ren,Junjiang Zhu
Zeolite X was used as support of copper catalyst (Cu/X) for selective catalytic reduction (SCR) of nitrogen oxide (NO) with ammonia (NH 3 ). Modulated excitation in situ/ operando infrared (IR) spectroscopy and phase-sensitive detection (PSD) were applied to study the reaction intermediates that formed on the Cu/X during transient experiments. Changing the gas concentration to periodically create unsteady conditions enabled the selective extraction of the dynamic species that were directly involved in the reaction. The IR results showed that only Lewis acid sites (L X ) existed on zeolite X,and Brønsted acid sites (B) and extra Lewis acid sites (L Cu ) were generated after Cu loading. The transient experiment results indicated that the SCR reactions on Cu/X obeys the Eley − Rideal (E − R) mechanism, in which NH 3 is first adsorbed on the L X and L Cu sites (L X –NH 3 , L Cu –NH 3 ) and then moved to the B sites (B–NH 3 ), where it reacted with gas-phase NO to form NH 2 NO intermediate, which finally decomposed into N 2 and H 2 O. Moreover, it is found that the NH 3 adsorbed on L Cu and B sites exhibits stronger reactivity than that on the L X sites.
✓ 已验证
产品关联
DOI
高影响因子
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA
·
2023
·Vol. 120
·期 43
·e2311585120
·
IF 11.1
Chao-Hai Gu,Song Wang,Ai-Yong Zhang,Chang Liu,Jun Jiang,Han-Qing Yu
Single-atom Fenton-like catalysis has attracted significant attention, yet the quest for controllable synthesis of single-atom catalysts (SACs) with modulation of electron configuration is driven by the current disadvantages of poor activity, low selectivity, narrow pH range, and ambiguous structure–performance relationship. Herein, we devised an innovative strategy, the slow-release synthesis, to fabricate superior Cu SACs by facilitating the dynamic equilibrium between metal precursor supply and anchoring site formation. In this strategy, the dynamics of anchoring site formation, metal precursor release, and their binding reaction kinetics were regulated. Bolstered by harmoniously aligned dynamics, the selective and specific monatomic binding reactions were ensured to refine controllable SACs synthesis with well-defined structure–reactivity relationship. A copious quantity of monatomic dispersed metal became deposited on the C3N4/montmorillonite (MMT) interface and surface with accessible exposure due to the convenient mass transfer within ordered MMT. The slow-release effect facilitated the generation of targeted high-quality sites by equilibrating the supply and demand of the metal precursor and anchoring site and improved the utilization ratio of metal precursors. An excellent Fenton-like reactivity for contaminant degradation was achieved by the Cu1/C3N4/MMT with diminished toxic Cu liberation. Also, the selective ·OH-mediated reaction mechanism was elucidated. Our findings provide a strategy for regulating the intractable anchoring events and optimizing the microenvironment of the monatomic metal center to synthesize superior SACs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENVIRONMENTAL RESEARCH
·
2023
·
IF 8.3
Zhengquan Yan,Xuemei Zhou,Lingmin Kong,Wenjing Xu,Junkai Hao,Shuo Sun,Jing Feng,Huitian Zhi,Xiao Zhu,Lei Hu
To effectively differentiate toxic aminophenol isomers, a kind of spindle-shaped Cu-Ru bimetal mesoporous nanozyme (Cu-Ru MPNZ) with high specific surface was developed by one-pot homogeneous reduction method, directed by hexadecyl trimethyl ammonium bromide (CTAB) in this work. By virtue of the distinctive microstructure, Cu-Ru MPNZ expressed superior bi-functional oxidase- and peroxidase-mimic activity to catalyze the oxidation of 3,3′,5,5,’-tetramethylbenzidine (TMB) and 2,2′-azinobis (3-ethylbenzothiazoline-6- sulfonic acid) ammonium salt (ABTS) with low Michaelis-Menten constants and quick reaction rates. Especially, toxic aminophenol isomers could exclusively react with the oxydates of TMB or ABTS to express differentiable signals in color. Under the optimal conditions, Cu-Ru MPNZ was successfully applied for visual differentiation of toxic aminophenol isomers in real aqueous, juices and medicinal samples with low detection limits (1.60 × 10 −8 mol/L for o -aminophenol and 3.25 × 10 −8 mol/L for m -aminophenol) and satisfactory recoveries (96.6–103.5%). The different recognition mechanisms of Cu-Ru MPNZ to toxic o - and m -aminophenol isomers were proposed for the first time as far as we known. This work will provide a potential way to monitor different organic isomer pollution in future.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Zhiying Shao,Jilai Lu,Jian Ding,Fengjiao Fan,Xinyang Sun,Peng Li,Yong Fang,Qiuhui Hu
Chitosan-pectin gel beads (CPBs) were synthesized via a facile and green method and applied to remove heavy metals from aqueous solution. The structural characteristics of CPBs were investigated by SEM and FTIR, the mechanical strength of CPBs was measured by Texture Analyzer and the stability of CPBs was evaluated in acidic solution. To study the adsorption characteristics, the effect of pH, contact time, initial heavy metals concentration, temperature, adsorption mechanism and regeneration were systematically investigated. The adsorption kinetics fitted well pseudo-second-order model, and the adsorption isotherms were well described by Langmuir model. The maximum adsorption capacities of Cu(II), Cd(II), Hg(II) and Pb(II) were 169.4, 177.6, 208.5 and 266.5 mg/g, respectively. The adsorption-desorption experiments revealed that the CPBs exhibited a great reusability. Thus, the synthesized CPBs in this study had the potential to be utilized as an environment-friendly and green adsorbent for the removal of heavy metals.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ENERGY & FUELS
·
2021
·
IF 3.605
Kai Fang,Liujia Ma,Ya-Jun Cheng,Senlin Xia,Zhaohui Yang,Xiuxia Zuo,Lianmin Ji,Jie Gao,Peter Müller-Buschbaum,Yonggao Xia
Silicon anode has a huge potential to replace graphite anode. Nevertheless, it shows poor long-term cyclic stability and rate capability due to a huge volume change upon lithiation and intrinsic semiconductor property. In this manuscript, a silicon composite with nonagglomerated super-small sized copper nanoparticles (average diameter: 7 nm) was obtained. First, the super-small copper nanoparticles (NPs) are beneficial to enhance the electron conductivity and electrochemical kinetics. Second, the copper NPs help to stabilize the electrode by absorbing mechanical stress. An amine based curing agent works as not only the solvent but also the carbon precursor. The thermosetting epoxy resin inhibits the agglomeration of the copper and silicon nanoparticles. Both silicon and copper nanoparticles are homogeneously dispersed in the carbon formed during the calcination under an inert atmosphere. The influence of the silicon and copper contents on the composition, structure, morphology, crystallinity, porosity, dispersion, and electrochemical performance of the Si/Cu/C nanohybrids are thoroughly studied by various techniques. The structure–property correlation of Si/Cu/C nanohybrids is investigated. A good balance among capacity, cyclic stability, and rate performance is achieved.
✓ 已验证
产品关联
DOI
高影响因子