文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3901至3912个,产品总数4,488个

切换升序
Cu
ACS Omega · 2021 · IF 3.512

Hierarchical N-Doped CuO/Cu Composites Derived from Dual-Ligand Metal–Organic Frameworks as Cost-Effective Catalysts for Low-Temperature CO Oxidation

Jingwen Mao,Lei Qin,Lin Tian,Lantian He,Yujie Zhu,Qin Meng,Guoliang Zhang

Development of multi-ligand metal–organic frameworks (MOFs) and derived heteroatom-doped composites as efficient non-noble metal-based catalysts is highly desirable. However, rational design of these materials with controllable composition and structure remains a challenge. In this study, novel hierarchical N-doped CuO/Cu composites were synthesized by assembling dual-ligand MOFs via a solvent-induced coordination modulation/low-temperature pyrolysis method. Different from a homogeneous system, our heterogeneous nucleation strategy provided more flexible and cost-effective MOF production and offered efficient direction/shape-controlled synthesis, resulting in a faster reaction and more complete conversion. After pyrolysis, they further transformed to a unique metal/carbon matrix with regular morphology and, as a hot template, guided the orderly generation of metal oxides, eliminating sintering and agglomeration of metal oxides and initiating a synergistic effect between the N-doped metal oxide/metal and carbon matrix. The prepared N-doped CuO/Cu catalysts held unique water resistance and superior catalytic activity (100% CO conversion at 140 °C).

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED ORGANOMETALLIC CHEMISTRY · 2019 ·Vol. 34 ·期 1 ·e5264 · IF 3.259

Syntheses, crystal structure and biological evaluation of three novel Cu (II) complexes with Schiff base derived from fluorinated amino acid and Salicylaldehyde

Ruixue Wu,Caifeng Bi,Xia Zhang,Ziao Zong,Chuanbin Fan,Xiaoyin Zhang,Nana Li,Yuhua Fan

Three novel Cu (II) coordination complexes, formulated as [Cu 3 (C 14 H 8 NO 3 F) 2 (CH 3 COO) 2 ] n ( 1 ), [Cu 2 (C 14 H 9 NO 3 F) 2 (CH 3 COO)Cl] ( 2 ) and [Cu(C 14 H 8 NO 3 F)(CH 3 OH) 2 ] ( 3 ), have been synthesized by 3-Fluoroanthranilic acid, Salicylaldehyde and Cu (II) salt as sources in different reaction conditions and characterized by single crystal X-ray diffraction, X-ray powder diffraction, IR spectroscopy and elemental analysis. Single-crystal diffraction analysis revealed that the complexes exhibited different coordination modes and conformations which were linked into multidimensional networks through some weak interactions. The biological activities vary greatly on account of the different Cu (II) numbers among the three complexes. In order to discuss the bioactivities, the complexes have been screened for antimicrobial activities against E. coli and S. aureus , antitumor activities against A549 (human lung cancer cells), Hela (human cervical cancer cells) and HepG-2(human liver hepatocellular carcinoma cells). Their interactions with calf thymus DNA were investigated by UV–visible and fluorescence spectrometry, as well as viscosity measurements. Interestingly, 1 (the rare 3-core Cu (II) coordination polymer) shows great antibacterial activities and highest DNA binding affinities. Antitumor studies revealed that complex 1 also exhibited highest activity.

CAS / MDL: 95-01-2 825-22-9 90-02-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ORGANIC ELECTRONICS · 2019 · IF 3.495

Compositional engineering of multinary Cu–In–Zn-based semiconductor nanocrystals for efficient and solution-processed red-emitting quantum-dot light-emitting diodes

Zhongyuan Guan,Fei Chen,Zhenyang Liu,Peiwen Lv,Mingjun Chen,Mingxuan Guo,Xu Li,Feng Teng,Song Chen,Aiwei Tang

For quantum-dot light-emitting diodes (QD-LED), replacing Cd-based II-VI nanocrystals (NCs) with the Cu-In-Zn-VI counterparts combines the consideration of environmental benignity and device performance. To prove this concept, the chemical composition and nanostructures of Cu-In-Zn-VI nanocrystals need to be thoroughly explored aiming to competitive optoelectronic properties. Herein, we reported a detailed study of Cu–In–Zn–Se–S synthesis and demonstrated how the optical bandgap, emission full width at half-maximum (FWHM) and the performance of QD-LED were tuned by simply changing the dose of precursors in a non-injection synthesis. Evident by optical absorption , the optimization of Se and Cu doses enabled good dispersity and desired emission wavelength . Further analysis of photo-electron spectroscopy revealed the chemical composition from core to surface favored soft confinement of exciton by gradually increasing the loading of Zn element. Finally, we successfully demonstrated solution-processed QD-LEDs with the best external quantum efficiencies as high as 4.2% and emission wavelength centering at 663 nm. To our best knowledge, this is the most efficient solution-processed red QD-LED based on Cu-In-Zn-VI nanocrystals.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Green Energy & Environment · 2019 · IF 0

Novel synthesis of fly-ash-derived Cu-loaded SAPO-34 catalysts and their use in selective catalytic reduction of NO with NH3

Ge Li,Baodong Wang,Qi Sun,Wayne Qiang Xu,Ziran Ma,Hongyan Wang,Daojun Zhang,Jiali Zhou

A combined acid–alkali hydrothermal method was used to prepare fly ash –derived SAPO-34 molecular sieves from a thermal power plant in Inner Mongolia (China). The specific surface area of the prepared fly-ash-derived SAPO-34 molecular sieves was 579 m 2 g −1 , the total pore volume was about 0.27 cm 3 g −1 , and the pore size was 0.56 nm; the molar ratios of Al 2 O 3 :P 2 O 5 :SiO 2 were 1:0.86:0.45. Cu/SAPO-34 catalysts were prepared by impregnation of low-cost fly-ash-derived SAPO-34 molecular sieves as a support and tested in selective catalytic reduction with NH 3 (NH 3 -SCR). Powder X-ray diffraction (XRD), N 2 adsorption–desorption, X-ray photoelectron spectroscopy (XPS), H 2 temperature-programmed reduction (H 2 -TPR), NH 3 temperature-programmed desorption (NH 3 -TPD), electron paramagnetic resonance (EPR), nuclear magnetic resonance (NMR), X-ray fluorescence analysis (XRF) and scanning electron microscopy (SEM) were used for catalyst characterization and investigation of the relationships between the catalyst structure and the catalytic activity. The actual silica:alumina ratio of the molecular sieves did not increase with increasing Cu loading, indicating that increasing the Cu loading does not change the original structure of the SAPO-34 molecular sieves. The XRF and NMR results showed that replacement by Cu results in more Si islands. The molecular sieve acidity decreased because of the increased number of Si islands. The NH 3 -TPD results showed that for the Cu/SAPO-34 catalysts there was a low correlation between the low-temperature activity and the amount of acidic sites. SCR activity is closely related to the location of Cu. The 4.47Cu/SAPO-34 catalyst has the highest isolated Cu 2+ showed the highest NH 3 -SCR activities (> 90%) at 250–350 °C. This work opens up new avenues for recycling fly ash formed in coal-fired power plants (reducing environmental pollution) and developing low-cost SCR catalysts for NO x pollution control.

CAS / MDL: 77-98-5
✓ 已验证 产品关联 DOI
查看原文 查看 PubMed
BIOSENSORS & BIOELECTRONICS · 2019 · IF 9.518

A novel enzyme-free electrochemical biosensor for rapid detection of Pseudomonas aeruginosa based on high catalytic Cu-ZrMOF and conductive Super P

Xin Zhang,Guoming Xie,Dan Gou,Peng Luo,Yuan Yao,Hui Chen

Pseudomonas aeruginosa ( P. aeruginosa ) is one of the most intractable multidrug-resistant bacteria of nosocomial infections. The conventional detection methods for P. aeruginosa are time-consuming or low detection sensitivity. Here, a novel enzyme-free electrochemical biosensor was constructed to detect P. aeruginosa rapidly and sensitively. Firstly, the ZrMOF with large surface area was synthesized, which offers excellent adsorption. Further, it was connected with a specific amount of Cu 2+ to synthesize Cu-ZrMOF with high catalytic activity . Then the [email protected] @DNA nanocomposite was composed and served as the signal probe to catalyse the decomposition of H 2 O 2 . Moreover, high conductive Super P was introduced to increase the electron transfer for satisfactory detection sensitivity. The proposed biosensor was constructed and used to quantify P. aeruginosa with a wide linearity range of 10–10 6   CFU  mL −1 and a low limit of detection of 2 CFU mL −1 (S/N = 3). Compared with conventional methods, the new method of present biosensor is more sensitive, and less time-consuming (only within 120 min). The analytical performance evaluation indicated that the biosensor exhibits good reproducibility and specificity. Finally, the biosensor was successfully applied to quantify P. aeruginosa in spiked urine samples. These results show that the proposed electrochemical biosensor might be a potential laboratory tool for detecting P. aeruginosa in the clinic.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2019 · IF 4.084

Grain boundaries of Co(OH)2-Ni-Cu nanosheets on the cotton fabric substrate for stable and efficient electro-oxidation of hydrazine

Huasheng Jiang,Zining Wang,Palanisamy Kannan,Hui Wang,Rongfang Wang,Palaniappan Subramanian,Shan Ji

Metal/metal hydroxide hybrid heterostructures exhibits superior performances in diverse research fields, especially in catalysis due to the presence of ample grain boundary interfaces and the strong metal/metal hydroxide synergistic actions. Herein, Co(OH) 2 -Ni hybrid heterostructures with a crystalline Ni and Co(OH) 2 is prepared on the cotton fabric substrate by a simple electrochemical process . The Co(OH) 2 -Ni hybrid heterostructures are explored as a highly active catalyst for the electro-oxidation of hydrazine in an alkaline medium . The existence of ample grain boundary interfaces and promotional synergistic effect between the nanocrystalline metallic Ni and Co hybrid heterostructures lead to a very low-onset hydrazine oxidation potential of −0.06 V vs RHE. Moreover, the Co(OH) 2 -Ni hybrid heterostructured electrode exhibits excellent long-term catalytic stability.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SCIENCE OF THE TOTAL ENVIRONMENT · 2019 · IF 5.589

Limited Cu(II) binding to biochar DOM: Evidence from C K-edge NEXAFS and EEM-PARAFAC combined with two-dimensional correlation analysis

Jing Wei,Chen Tu,Guodong Yuan,Yongqiang Zhou,Hailong Wang,Jian Lu

Multiple spectroscopic technologies and chemometric analyses were combined to explore the compositional characteristics and Cu binding performance of biochar-derived dissolved organic matter (DOM). The DOM samples were extracted from biochars produced from lignocellulose-rich rapeseed cake (RSC) by pyrolysis at 300, 500, and 700 °C (i.e., RSC300, RSC500, RSC700). Fourier transform infrared spectroscopy (FTIR) and carbon K-edge near-edge X-ray absorption fine structure spectroscopy (NEXAFS) analyses were combined to elucidate the molecular-level C species in the DOM. With the increasing pyrolysis temperature, DOM aromaticity increased, whereas the proportion of metal complexing sites (e.g., carboxyl and phenolic groups) decreased. Fluorescence excitation-emission matrix (EEM) spectroscopy with parallel factor analysis (PARAFAC) indicated that biochar DOM, irrespective of pyrolysis temperature, was mostly composed of three types of humic-like components (C1–C3), and a small amount of a protein-like component (C4). As charring temperature increased, DOM concentrations decreased substantially, but the humic-like C3 with abundant aromatic structures became predominant. Fluorescence quenching experiment and two-dimensional correlation spectroscopy (2D-COS) analysis suggested that the preferential Cu(II) binding fractions of the DOM were the humic-like substances. Moreover, the quenching curve fitting results for individual components indicated that despite the Cu(II) binding affinity was slightly enhanced as the pyrolysis temperature increased, the binding capacities of the four components decreased. In general, the DOM components from RSC biochar exhibited limited Cu(II) binding capacities (2.18–17.7 μmol L −1 ). Results from this study improved understanding of the mechanisms by which biochar DOM interacts with Cu, and provided tools for fast screening of biochars to reduce their environmental risks.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2018 · IF 6.735

Oxidation of acetaminophen by Green rust coupled with Cu(II) via dioxygen activation: The role of various interlayer anions (CO32−, SO42−, Cl−)

Linghui Zhao,Yufan Chen,Yong Feng,Deli Wu

In this study, three GR/Cu(II) (Green Rust/Cu(II)) composites (GR SO4 /Cu(II), GR CO3 /Cu(II), and GR Cl /Cu(II)) were synthesized and used to activate dioxygen under weakly acidic conditions. The change in the mechanism caused by three interlayer anions, CO 3 2− , SO 4 2− , and Cl − , was discussed for the first time. Both Cu(I) and H 2 O 2 were generated during GR/Cu(II)-induced dioxygen activation, resulting in the rapid degradation of acetaminophen. The inconsistency between the reaction constant rates and oxidation reduction potential (ORP) order revealed the effects of the various types of interlayer ions. To further reveal the effects of the anions, the variations in the morphology and valence states of the composites were examined. To identify the rate-controlling step of dioxygen activation by the three composites, the production of reactive oxygen species (ROS) was investigated and compared. The combination of interlayer anions and metal ions changed the oxide morphology of the solid-phase materials. Furthermore, changes in the content of the reductive species (Fe(II) or Cu(I)) either enhanced or inhibited specific reaction steps. The results from this study could deepen our understanding of the effects of anions on dioxygen activation by transition metals and provide a basis for the study of oxidation reactions and mechanisms in the presence of various anions.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
EUROPEAN JOURNAL OF INORGANIC CHEMISTRY · 2018 ·Vol. 2018 ·期 31 ·3565-3569 · IF 2.507

Fabrication of Amorphous Cu–Co–P Nanofilms on CuCo2O4 Nanoarrays by in Situ Electrochemical Reduction for Efficient Hydrogen Evolution in Alkaline Solution

Xiangjiang Zheng,Jiayu Zhang,Zhaomei Sun,Zhen Zhang,Dongmei Xi

Graphical We realized in-situ fabrication of amorphous Cu–Co–P nanofilms on CuCo 2 O 4 nanoarrays by cathodic electrochemical reduction to efficiently catalyze the hydrogen evolution reaction (HER) in alkaline solution. The catalyst needs an overpotential of only 104 mV at 20 mA cm –2 in 1.0 m KOH and presents good durability for at least 24 h. We demonstrate an efficient in-situ method to fabricate amorphous Cu–Co–P nanofilms on CuCo 2 O 4 nanoarrays by cathodic electrochemical reduction. These are used to catalyze the hydrogen evolution reaction (HER) in alkaline solution. The catalyst needs an overpotential of only 104 mV in 1.0 m KOH when the current density is 20 mA cm –2 . More importantly, it has good durability for at least 24 h. This method provides an effective approach to develop a nonprecious metal catalyst for industrial hydrogen evolution.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY · 2018 ·Vol. 317 ·期 2 ·959-968 · IF 1.181

Large-scale synthesis of nano Cu2O/Cu–C for iodide removal in a novel countercurrent two-stage adsorption and membrane separator system

Zhang Xiaoyuan,Gu Ping,Zhou Shishuai,Dong Lihua,Zhang Guanghui

A synthesis method was introduced for the large-scale preparation of a nano Cu 2 O/Cu-modified activated carbon composite, L-nano Cu 2 O/Cu–C. As the adsorbent, the synthesized composite could efficiently remove radioactive iodide ions (I − ) from simulated water. A lab-scale integrated novel countercurrent two-stage adsorption and membrane separator system was designed to assess the practical application of L-nano Cu 2 O/Cu–C. Stable and high I − removal efficiency was achieved during the operation of the system. The effluent met the water quality requirements, and the membrane fouling rate was lower. This study provides a potential process to treat water contaminated with radioactive I − in practical applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH · 2018 ·Vol. 26 ·期 3 ·2820-2834 · IF 2.8

Insights into removal of tetracycline by persulfate activation with peanut shell biochar coupled with amorphous Cu-doped FeOOH composite in aqueous solution

Xu Jian,Zhang Xueliang,Sun Cheng,Wan Jinzhong,He Huan,Wang Fei,Dai Yuxuan,Yang Shaogui,Lin Yusuo,Zhan Xinhua

Peanut shell biochar (BC) supported on Cu-doped FeOOH composite (Cu–FeOOH/BC) was synthesized using a facile and scalable method. The Cu–FeOOH/BC samples were characterized by Fourier transform infrared spectroscopy (FTIR), x-ray diffraction (XRD), scanning electron microscopy equipped with an energy-dispersive spectrometer (SEM-EDS), x-ray photoelectron spectroscopy (XPS), and Brunauer-Emmett-Teller (BET) techniques. Novel catalytic composites with different Cu/Fe molar ratios were compared systematically by activating persulfate (PS) for the tetracycline (TC) degradation. 0.5Cu–1FeOOH/BC (Cu/Fe molar ratio = 0.5:1) was confirmed as the optimum activation material and the removal of TC reached 98.0% after 120 min by combining with 20 mM PS at pH 7.0 and 25 °C. The influencing factors including catalyst loading, PS dosage, water matrix species, and pH on the performance system of 0.5Cu–1FeOOH/BC-PS were investigated, respectively. Reaction rate constants ( K obs ) on catalyst dosages (0.05, 0.10, 0.20, and 0.30 g L −1 ) were 0.0072, 0.0101, 0.0244, and 0.0144 min −1 , and 0.0090, 0.0146, 0.0244, and 0.0178 min −1 for the change of PS concentrations (5, 10, 20, and 30 mM), which indicated that increasing the concentrations of catalyst and PS appropriately improved TC degradation, but excessive dosages inhibited the reaction process of TC removal. The TC removal rate was inhibited by inorganic anions with the following order of HCO 3 − > Cl − > HPO 4 2− > SO 4 2− > NO 3 − . Free radical quenching and capture experiments under different pH values revealed that sulfate radicals existed predominantly in acidic conditions and hydroxyl radicals in alkaline conditions. The catalyst showed an excellent recyclability and stability and the removal efficiency of TC still remained over 90% after five consecutive uses. To conclude, coupling of 0.5Cu–1FeOOH/BC and PS can be successfully applied as an effective and stable technique for the treatment of refractory organic pollutants in wastewater.

CAS / MDL: 60-54-8
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2018 · IF 2.829

Eco-friendly poly(acrylic acid)-sodium alginate nanofibrous hydrogel: A multifunctional platform for superior removal of Cu(II) and sustainable catalytic applications

Min Wang,Xiong Li,Tonghui Zhang,Li Deng,Peiyun Li,Xuefen Wang,Benjamin S. Hsiao

A thorough cleanup of heavy metal ions in water bodies is of vital importance for the urgent requirement of clean potable water. In this study, combining the prominent structural characteristics of electrospun nanofibers and the special property of hydrogels, we developed a green strategy to construct an eco-friendly poly(acrylic acid)-sodium alginate nanofibrous hydrogels (PAA-SA NFHs) by electrospinning PAA-SA nanofibers, and followed by a facile thermal cross-linking treatment. The resultant PAA-SA NFHs with high swelling ratio, intrinsic fiber morphology, excellent stability and satisfactory mechanical performances exhibited prominent adsorption performances towards Cu 2+ (q m  = 591.7 mg/g) and outstanding regenerability. Notably, by virtue of the synergy of porous network structure, superhydrophilicity and faster adsorption rate, such PAA-SA NFHs membrane permitted extremely high water permeation flux solely driven by gravity (up to 868.5 L m −2  h −1 ) and remarkable removal efficiency, when acted as a free-standing filter for the dynamic removal of Cu 2+ . Furthermore, we also demonstrated a sustainable strategy of converting the toxic Cu 2+ pollutants to valuable Cu nanoparticles for imparting additional functionality of catalysis, and the resultant PAA-SA NFHs with uniformly distributed Cu nanoparticles possessed an excellent catalytic activity. Consequently, constructing such attractive PAA-SA NFHs will provide new insights into the design and exploitation of novel adsorbents or filters for the practical water purification, and to recycle metals (copper and potentially others) for keeping the resources sustainable.

CAS / MDL: 100-02-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。