JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Ruiming Fang,Jiahe Sun,Mingnv Guo,Yanglin Chen,Zukhra C. Kadirova,Zhongqing Yang,Ziqiang He,Huaqiang Chu
The photothermal catalytic reduction of CO 2 to synthesize high-value hydrocarbon fuels has attracted significant attention. However, current conversion efficiency remains constrained by the dual limitations of insufficient photogenerated carrier concentration and the difficulty in effectively adsorbing and activating CO 2 . This work first successfully synthesized g-C 3 N 4 nanohollow spheres using a hard template method and ultrathin Bi 2 MoO 6 nanosheets via a solvothermal method, and then fabricated an S-scheme heterojunction by electrostatic assembly. Crucially, during the photothermal catalytic reaction, the dynamic formation of photogenerated oxygen vacancies and their induced dipole-limited domain field (DLDF) structure were identified as the key mechanism driving the exceptionally high activity in CO 2 photoreduction. In situ electron paramagnetic resonance spectroscopy directly demonstrated the dynamic cycling of the photogenerated oxygen vacancies during the catalytic reaction. Density functional theory calculations and carrier dynamics characterization analysis confirmed the synergistic effect of the DLDF in optimizing carrier kinetics and enhancing CO 2 adsorption. Ultimately, a high CO production rate of 48.69 μmol·g −1 ·h −1 was achieved. This work integrates heterojunction construction and morphology control strategies to achieve synergistic enhancement of photothermal catalytic performance and elucidates the intrinsic mechanism for the activity improvement. It provides an effective way for developing efficient heterojunctions for photothermal catalytic CO 2 reduction.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2026
·
IF 6.4
Mengge Li,Yingjun Cui,Meng Cheng,Xiangyou Wang,Shuaiyu Guo,Xinyu Yang,Rongfei Zhang
This study aimed to develop a hydrogel (HD)-based active intelligent packaging film for the controlled release of carvacrol (CA). HD was incorporated as a CA carrier within the matrix of acetylated distarch phosphate (ADSP) and polyvinyl alcohol (PVA). The structure and properties of HD and its effect on film properties were studied. Among them, the film containing 6 g HD (PRP-6 film) had the best overall performance. Scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray diffraction confirmed the good compatibility between HD and the film base. Thermogravimetric analysis revealed enhanced thermal stability of PRP-6 compared with that of the films with directly added CA (PCO film). The release kinetics of CA in PRP-6 films and PCO films was investigated under varying temperatures, humidity, and acid–base conditions. The PRP-6 film exhibited controlled CA release in response to environmental changes, extending the release period to 12 d compared with that of the PCO film. The first-order kinetic model provided the best fit for describing CA release behavior, and the release process of CA followed Fick's diffusion law. The PRP-6 film showed sustained antibacterial activity over a 12-day storage period. In addition, PRP-6 films retarded the increase in fish pH and L values and inhibited the decrease in fish TVB-N values. This study established a theoretical foundation for developing advanced active packaging systems in aquatic product preservation.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Ru Jia,Sha Yan,Xuezhe Huang,Zongyan Cui,Xiaofeng Xue
Honey is primarily composed of sugars, with their profiles governing its quality. Twelve types of sugars in 784 honey samples, including 20 types of Chinese monofloral honeys, were accurately quantified by ultra-high performance liquid chromatography coupled with evaporative light scattering detection. Turanose (1.48 ± 0.63 g/100 g) was the most abundant oligosaccharide, followed by maltose (1.33 ± 0.43 g/100 g), and erlose (0.96 ± 0.80 g/100 g) was the predominant trisaccharide. Using unsupervised clustering, these honey samples were segmented into three clusters: high-oligosaccharide (e.g., jujube and fennel honey), high-glucose and low-oligosaccharide (e.g., rape, lychee and rubber honeys) and moderate-oligosaccharide clusters. The correlation analysis revealed strong correlations among turanose, maltulose, kojibiose and isomaltose, suggesting co-transformation among these sugars during honey ripening process and guiding future research directions. This study elucidated the sugar profile characteristics of Chinese honey, laying the foundation for enhancing its quality.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Jianxiang Xiong,Xuejun Lai,Hongqiang Li,Hao Wang,Xiangyu Su,Xingrong Zeng
The tracking resistance of silicone rubber was commonly improved by incorporating a large amount (>40 wt%) of inorganic fillers, such as aluminum hydroxide, which severely deteriorated its processability and mechanical properties. In this work, platinum-anchored TiO 2 (Pt@TiO 2 -450) was prepared by impregnating TiO 2 in H 2 PtCl 6 aqueous solution and heating at 450 ℃. It was found that the platinum-anchored rutile TiO 2 (Pt@TiO 2 -R450) and fluorophlogopite nanosheet (FPN) could synergistically promote the ceramization of silicone rubber to significantly enhance its tracking resistance. When the content of Pt@TiO 2 -R450 and FPN was 1.0 phr and 0.5 phr, respectively, the tracking resistance of SR/Pt@TiO 2 -R450 reached 1A4.5 level and the erosion ratio was 0.7%. After heating at 1000 ℃ for 1 h, the organic–inorganic conversion ratio and flexural strength were 47.1% and 7.02 MPa, respectively. High-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS) and X-ray absorption fine structure (XAFS) spectroscopy revealed that the exposed crystal plane of rutile TiO 2 in Pt@TiO 2 -R450 was (110) plane and oxygen vacancies were generated during high-temperature treatment. The oxygen vacancies could anchor Pt and suppress its aggregation at elevated temperature. Meanwhile, the electron transfer from TiO 2 to Pt reduced the oxidation state of Pt species to enhance the catalytic activity for crosslinking of silicone rubber at elevated temperature, which promoted the organic–inorganic conversion to form ceramic barrier. The skeletal support and barrier effect of FPN further improved the compactness of the ceramic barrier. As a result, the silicone rubber rapidly formed a compact SiOC-like ceramic barrier on its surface when subjected to arc discharge, which efficiently defended arc bombardment and heat transfer. Therefore, the tracking resistance of silicone rubber was significantly enhanced.
✓ 已验证
产品关联
DOI
高影响因子
TETRAHEDRON
·
2026
·
IF 2.1
Xueqiang Liu,Xu Yao,Haiquan Zhang
The π-interaction between conjugated organic radicals is a topic worth exploring for researchers in chemistry and materials science. We identified a class of perylene diimide radical π-dimers formed upon heating, possesses remarkable stability far greater than that of conventional analogues. (Dyes pigm., 2022, 197, 109847). Here, a series of perylene diimide derivatives (PDIs) were designed with the goal of synthesizing the corresponding radical π-dimers, clarifying the formation and stability mechanisms of these π-dimers, and investigating the nature of their π-bonds and other relevant properties. We proposed a reaction mechanism based on the relationship between such π-dimer, monomer and perylene diiimide anion radical/amine hydrogen bonding complex (Reaction intermediates). The exceptional stability of these π-dimers was elucidated through 1 H NMR analysis, indirect estimating their multicentred π-bonding energy via thermogravimetric analysis. The results suggest that anion radical/amine hydrogen bonding complex can promote the formation of these π-dimers, and the double charge transfer in these radical π-dimers can increase the multicentred π-bonding energy.
✓ 已验证
产品关联
DOI
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2026
·
IF 7.9
Ziyan Wang,Hetang Wang,Xiaolong Zhu,Xiaojuan Li,Panpan Yang,Yanshu Zhang
Traditional dust suppressants are typically chemical agents, which suffer from poor biodegradability and potential toxicity. This study evaluates the anionic dust suppressant sodium dodecyl benzene sulfonate (SDBS), the nonionic fatty alcohol polyoxyethylene ether-9 (AEO-9), and the biological rhamnolipid in terms of wettability, biodegradability, and acute toxicity. Wettability was assessed by measuring surface tension using a foam interfacial rheometer. Biodegradation was evaluated via foam fluctuation rates after shaking with activated sludge. Acute toxicity was assessed through intratracheal instillation in mice, with median lethal dose (LD50) calculated using Horn’s method, and lung tissues analyzed histopathologically via Hematoxylin and Eosin (HE) staining. The results demonstrated distinct differences in wettability, biodegradability, and acute toxicity among the dust suppressants. Wettability variations were reflected in equilibrium surface tension and critical micelle concentration (CMC). Biodegradation tests confirmed 100 % degradation for all agents, but with faster kinetics for rhamnolipid (26 h) than SDBS and AEO-9 (28 h). Acute toxicity, assessed via LD50 and histopathological analysis, revealed pulmonary toxic responses. This study proposes a comprehensive evaluation framework for dust suppressants, integrating wettability, biodegradability, toxicity, and histopathology. This framework proposes a systematic approach to differentiate environmental compatibility and biosafety, providing practical guidance for screening, optimization, and regulatory assessment in coal mining and related industries.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2026
·
IF 5.1
Wenjuan Luo,Xiunan Cai,Zhongqiu Luo,Chaochao Lai,Qian Long,Xue Yang,Limin Ning,Pingyan Wang,Xiang Zhang,Xin Fu,Xintao Zhou
Developing efficient and cost-effective processes for removing highly toxic As(III) from water is critical for environmental restoration. Herein, an amorphous Fe–Mn composite (A-CSM) rich in oxygen vacancies was synthesized via a one-pot process. Acid etching of a pretreated copper slag product created the chemical conditions that simultaneously enabled the in situ anchoring of MnO x clusters and induced a crystalline-to-amorphous transformation. The resulting strong Fe–O–Mn interfacial coupling drives interfacial electron redistribution, which upshifts the d-band center and thereby endows the material with unique capabilities for O 2 activation and arsenic adsorption. Leveraging abundant oxygen vacancies within the amorphous structure, A-CSM efficiently activates O 2 into •O 2 − radicals to drive spontaneous As(III) oxidation to As(V), while exposed unsaturated sites in amorphous FeO x domains provide rapid adsorption sites for As(V). Consequently, A‑CSM exhibits a broad pH range (3–9), rapid adsorption kinetics (achieving complete removal of 5 mg L −1 As(III) within 30 min, which is 24.7 times faster than its crystalline counterpart, CSM), the q max calculated by Langmuir model is 84 mg g −1 , and good reusability over five consecutive cycles. Mechanistic studies confirmed that the synergy between the acid etching‑induced amorphous structure and oxygen vacancies significantly reduces the O 2 adsorption energy while it upshifts the d‑band center. This effect lowers the energy barrier for As(III) oxidation/adsorption by approximately 48.9%, and substantially enhances •O 2 − generation. Adsorption primarily involves complexation, electrostatic interactions, and hydrogen bonding, which is consistent with a heterogeneous multilayer process as described by the Freundlich isotherm.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2026
·
IF 6.6
Hang Li,Muhammad Mubeen,Jingbao Wang,Salman Khalid,Jingmao Zhao,Baomin Fan,Yiqian Lv,Mohammad Tabish,Haiqing Liu
Zn-Al-Mg coated steel (ZM-steel) has emerged as a preferred material in automotive and infrastructure applications, yet its long-term durability remains challenged by localized corrosion in chloride-rich environments. Herein, a sustainable and scalable corrosion protection strategy based on the in-situ formation of layered double hydroxide (LDH) films intercalated with benzothiazole (BTZ) was reported. By exploiting the controlled corrosion of ZM-steel surface in BTZ-containing NaCl solution, compact LDH architectures spontaneously formed, incorporating BTZ molecules within their interlayers. The resulting hybrid coating integrated the physical barrier effect of LDH with the release of BTZ anions, enabling interfacial passivation and sustained corrosion inhibition. Comparative electrochemical tests revealed that BTZ-containing NaCl solution yielded markedly enhanced corrosion-resistance as compared to NaCl solution or bare BTZ solution, with charge transfer resistance increasing from 9.44 × 10 2 to 9.13 × 10 4 Ω·cm 2 . Moreover, epoxy-overcoating effectively suppressed filiform corrosion (FFC) of ZM-steel substrate for over 35 days. Unlike conventional hydrothermal or carbonate-assisted routes for LDH fabrication, this precursor-free strategy proceeds under ambient conditions without additional reagents, underscoring its simplicity, efficiency, and scalability. These findings demonstrate that the moderate corrosion is beneficial to the formation of LDH on ZM-steel surface.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2026
·
IF 9.6
Yue Wu,Chengyu Zhang,Mengyao He,Hao Xiu,Jing Hu,Dongming Qi,Yangyi Sun
Asymmetric magnetic mesoporous silica (AMMS), consisting of mesoporous silica (mSiO 2 ) anchored at one end of ferric oxide (Fe 3 O 4 ) nanoparticles (NPs), has emerged as a promising catalyst carrier owing to its magnetic recyclability, high loading capability, and unique spatial separation, which enables enhanced mass transfer and accessibility of catalytic active sites. However, conventional AMMS systems typically suffer from chemical isotropy resulting from complete Fe 3 O 4 encapsulation and limited tunability of mSiO 2 morphology, thereby seriously restricting their efficacy in practical catalysis. Herein, we report an ionization-degree-mediated anisotropic assembly strategy to synthesize unconventional AMMS featuring exposed Fe 3 O 4 (eFe 3 O 4 ) heads and length-tunable mSiO 2 rods. Upon loading with Au NPs, the resultant asymmetric magnetic mesoporous silica catalyst-stir-bars (AMMCs) exhibit enhanced catalytic performance in both Fenton oxidation of Acid Orange 7 (AO7) and hydrogenation of 4-nitrophenol (4-NP) and 2-nitroaniline (2-NA), achieving ultra-fast reaction rates that are orders higher than previously reported Au-based supported catalysts. Notably, the AMMCs also enable efficient one-pot reduction-oxidation catalysis of tetrabromobisphenol A (TBBPA), a reaction typically hindered by incompatible redox-active sites within traditional catalyst systems. In addition, the anisotropic rod-like architecture imparts magnetic-field-induced self-stirring capability, enhancing reaction kinetics by 1.65-fold. This work provides a robust and versatile synthetic strategy for structurally tunable and multifunctionally anisotropic magnetic catalysts for complex one-pot tandem catalysis reactions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2026
·
IF 8.8
Wenji Zheng,Yuliang Tao,Fengting Yao,Zhixu Yun,Miao Yu,Xiaobin Jiang,Gaohong He
Metal organic frameworks (MOFs)-based mixed matrix membranes (MMMs) exhibit great prospect for He/CH 4 separation. However, it is still restricted by interfacial incompatibility-induced low filler loading and selectivity loss. This study proposed an interface fusion strategy by 6FDA-TFMB (PI) functionalized CF 3 -UiO-66 through NH 2 -UiO-66 bridging to achieve dual regulation of interface compatibility and molecular sieving. Crucially, this interface fusion strategy allowed a substantial increase in filler loading to 20 wt%, representing a 100% improvement over unfunctionalized CF 3 -UiO-66. The covalent bond formed between the amino group and the dianhydride improved the interfacial compatibility. The –CF 3 group on the UiO-66 reduced the pore size of UiO-66 and weaken the adsorption of CH 4 . The dual synergistic effect made the resultant MMMs exhibited excellent He permeability (165.2 Barrer) and He/CH 4 selectivity (394.1), representing improvements of 81.14% and 319.7%, respectively, compared with pristine 6FDA-TFMB membrane, approaching to the 2008 Robenson upper bound, surpassing most of the reported PI based membranes for He/CH 4 separation. This synergistic architecture not only validated the interface fusion engineering but also provided a foundation for designing efficient He/CH 4 separation materials with tailored microscopic properties.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2026
·
IF 6.1
Shanshan Tao,Ruijia Hu,Xinyi Zhang,Chang Liu,Suqin Wang,Hongbo Li,Ruqin Yu
The residues of organophosphorus pesticides (OPs) in the environment and crops, resulting from irrational use will cause irreversible damage to the human nervous system by hindering acetylcholinesterase (AChE) activities. This study developed a novel proportional fluorescence sensing system based on UiO-66-NH 2 coated MnO 2 and Ampliflu Red (AR). In this sensor system, manganese dioxide nanosheets have both fluorescence quenching and catalytic functions. Based on the core mechanism of selective decomposition by reducing agents, it can respond to various OPs and enable multi-target detection of reducing biomolecules such as glutathione (GSH), cysteine (Cys), and ascorbic acid (AA). By means of principal component analysis (PCA), the sensor can effectively distinguish among GSH, Cys, and AA, achieving specific recognition of multiple targets. Under optimal conditions, the detection linear range for parathion is 1×10 -6 to 9×10 -1 mg/mL, with a detection limit as low as 0.33×10 -6 mg/mL; The linear ranges for GSH, Cys, and AA detection are 1–100 μM, 30–90 μM, and 1–50 μM, respectively, with detection limits of 0.33 μM, 10 μM, and 0.33 μM, respectively. This method exhibits high accuracy, facile operation, and favorable stability. It has been successfully implemented for the detection of tap water and 1% human serum samples. This makes the research findings more intuitive and clear. In addition, this research provides a feasible approach for developing diversified sensors based on functionalized metal-organic frameworks (MOFs), demonstrating strong potential for applications in environmental monitoring and bioanalysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBON
·
2026
·
IF 12.7
Xinya Gao,Qiaoling Li,Fang Liu,Shiying Zhang,Frank Ko,Hongqiang Wang,Zhongfu Li,Jiao Li
We present a single-step approach for producing ultra-microporous carbon membranes from lignin that eliminates spontaneous combustion during carbonization. A CO 2 -assisted electrospinning converts in situ NaOH→Na 2 CO 3 , enabling high-temperature self-activation without corrosive external agents. DFT further rationalizes CO-facilitated Na desorption, explaining the combustion-free carbonization. The resulting carbon membranes possess ultra-high surface area (2443 m 2 ·g -1 ) and narrowly distributed ultra-micropores (∼0.5 nm). At ultra-low Pt loadings (0.01 wt%), aberration-corrected HAADF-STEM and CO-pulse chemisorption reveal near single-atom dispersion (∼0.57 nm). The MC-Pt 0.01 (0.01 wt% Pt/microporous carbon) catalyst achieves 47.4% HCHO degradation at room temperature (70 ppm, 2 h, static) and 965 min fully penetrated with 262.5 mg·g -1 capacity (12 ppm, GHSV = 4000 L·g cat -1 ·h -1 ). Mechanistic analyses (EPR, O 2 -TPD, in situ DRIFTS) support a dual-site pathway, wherein vacancy-enriched ultra-micropores chemisorb HCHO, while atomically dispersed Pt activates O 2 to generate •O 2 - , driving complete mineralization to CO 2 . This strategy integrates waste-derived carbons with low-precious-metal catalysis, offering strong potential for sustainable indoor air purification and environmental remediation.
✓ 已验证
DOI
高影响因子