文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3949至3960个,产品总数347,550个

切换升序
JOURNAL OF POWER SOURCES · 2026 · IF 8.4

Partially carbonized strategy of ZIF-8 for the fabrication of ZnS/NC@MoS2 anode material : Towards high-performance Li+/Na+ storage

Juan Yu,Jiale Fan,Hao Zhang,Jingsen Yue,Xinxin Tang,Zhiyuan Ma

To address the issues of poor cycling stability and unrealized theoretical capacity of layered molybdenum disulfide (MoS 2 ) as an anode material—caused by severe volume expansion during charge/discharge processes—we innovatively propose a "partial carbonization" modification strategy for ZIF-8 templates. This approach successfully constructs a ZnS/NC "dodecahedral nursery" rich in active sites. Benefiting from the abundant anchoring sites provided by this structure, MoS 2 can uniformly and firmly "take root" on the "nursery" via Mo–N bonds, ultimately forming a composite material (ZnS/NC@MoS 2 ) in which MoS 2 nanoflowers uniformly coat the dodecahedral framework. This composite effectively mitigates the volume expansion of MoS 2 and enhances overall structural stability. Moreover, the zinc retained by the partial carbonization strategy, after sulfidation, contributes additional capacity via conversion reactions, further enhancing the material's electrochemical performance. Specifically, when used as an anode for lithium-ion batteries (LIBs), it maintains a specific capacity of 895.64 mAh g −1 after 1200 cycles at 2 A g −1 ; for sodium-ion batteries (SIBs), its specific capacity increases from 348 mAh g −1 to 510 mAh g −1 after 500 cycles at 1 A g −1 .

CAS / MDL: 693-98-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

Efficient hydrogen generation from magnesium hydrolysis catalyzed by MoSi2/C

Chunxu Hu,Xueping Zheng,Wenshuai Liu,Linkun Liang

Magnesium holds significant promise as an on-site hydrogen generation material due to its high theoretical hydrogen yield, low cost, and environmental friendliness. However, its practical application is severely hindered by the magnesium hydroxide passivation layer formed during hydrolysis. In this study, a composite catalyst of molybdenum disilicide supported on coconut shell-derived activated carbon (MoSi 2 /C) was synthesized via a two-step calcination method and subsequently compounded with magnesium powder through ball milling. The as-prepared Mg-5wt% MoSi 2 /C composite exhibits remarkable hydrogen production performance via hydrolysis in a 3.5 wt% NaCl solution (simulating seawater). At 25 °C, it achieves a hydrogen yield of 916 mL/g within 90 s and a maximum hydrogen generation rate (mHGR) of 780 mL·g −1 ·min −1 , significantly outperforming pure Mg and a Mg-C composite. The apparent activation energy for the hydrolysis of this composite is notably reduced to 15.62 kJ mol −1 , indicating substantially enhanced reaction kinetics. The enhanced performance originates from the synergistic effect between the conductive carbon matrix and the highly dispersed MoSi 2 nanoparticles: the carbon matrix effectively prevents the agglomeration of Mg particles and facilitates electron transfer, while the MoSi 2 nanoparticles provide abundant active sites for the hydrolysis reaction. This work presents an efficient catalytic strategy for developing high-performance, low-cost magnesium-based materials for hydrogen production via hydrolysis.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry C · 2026 · IF 5.1

Gate-reconfigurable metal-oxide/polymer heterojunction phototransistors for broadband photodetection and multifunctional opto-synaptic computing

Jia Li,Yali Yu,Min Guo,Xiaolong Li,Xinmu Chen,Guozhen Bai,Zhidong Lou,Yanbing Hou,Feng Teng,Yufeng Hu

Reconfigurable optoelectronic devices capable of integrating broadband photodetection with neuromorphic computation are highly desirable for next-generation intelligent systems. Here, we demonstrate a bilayer heterojunction phototransistor comprising zinc-tin oxide (ZTO) and poly(3-hexylthiophene) (P3HT), which exhibits gate-tunable photoconductance and multifunctional opto-synaptic behavior. The device achieves broadband photoresponse across ultraviolet and visible wavelengths, with responsivities of 2.5 × 10−1 A W−1 at 365 nm and 1.6 × 10−2 A W−1 at 520 nm, accompanied by specific detectivities of 2.4 × 1012 Jones and 1.5 × 1011 Jones, respectively. Gate-controlled reversible switching between positive and negative photoconductance (PPC/NPC) is achieved within a single ZTO/P3HT heterojunction phototransistor. This dual behavior originates from the asymmetric charge dynamics within the bilayer architecture. Under illumination, photogenerated holes are confined within the P3HT layer, while photogenerated electrons are transferred and accumulated in the ZTO layer. This interlayer coupling between the polymer and oxide layers enables bias-dependent modulation of carrier transport pathways, allowing dynamic and reversible transition between PPC and NPC within the same device. Beyond photodetection, the phototransistor effectively emulates key synaptic behaviors, including paired-pulse facilitation (PPF), short-term plasticity (STP), long-term plasticity (LTP), and diverse spike-dependent plasticity rules. The underlying physical mechanism of positive and negative correlations in spike-rate-dependent plasticity (SRDP) is elucidated as a competition between fast and slow relaxation dynamics under optical–electrical co-stimulation. Furthermore, convolutional neural network (CNN) simulations based on the device demonstrate robust image recognition performance, with recognition accuracy exceeding 98% after reinforcement by optical pulse modulation. These results highlight the potential of the ZTO/P3HT heterojunction as a reconfigurable opto-synaptic platform, bridging broadband photodetection and neuromorphic computing for future intelligent vision and in-sensor processing systems.

CAS / MDL: 7646-85-7 7772-99-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2026 · IF 8.8

Highly permeable and ultra-selective polyamide nanofiltration membrane with nanoconfined LDH-embedded composite structure for enhanced water purification

Hui Wen,Zhiyu Liu,Wei Qu,J. Paul Chen

Reactive nanofiltration (NF) systems that couple polyamide NF (PA-NF) with advanced oxidation processes reportedly offer a promising route for simultaneous degradation of emerging organic pollutants and desalination. However, their performance is constrained by limited catalytic activity, mass-transfer barriers, and trade-off between permeability–selectivity. Here, we develop a high-performance catalytic PA-NF membrane by introducing a layered double hydroxide (LDH) interlayer with the aim on creation of nanoconfined spaces within the internal membrane structure for enhancement in oxidant activation and mass transport. It was found that the interfacial polymerization by restricting amine diffusion can effectively be regulated, yielding a thin, defect-free PA layer enabling fast water transport and precise ion selectivity. The nanoconfinement with peroxymonosulfate markedly boosts oxidant delivery and electron-transfer efficiency, accelerating radical generation. Hence, the catalytic LDH-interlayered PA-NF membrane exhibited high water permeance (34.8 L/(m 2 ·h·bar)) and excellent ion selectivity, while simultaneously achieving nearly 100% atrazine degradation with a rate constant of 0.034 min −1 , far outperforming non-confined systems, even under natural organic matter and ionic interference. This work would provide a better solution for design of cost-effective materials for next-generation reactive NF technologies and sustainable water and wastewater treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ETHNOPHARMACOLOGY · 2026 · IF 6.8

Ligilactobacillus murinus Confers a Dual Benefit: Counteracting Crotonis Fructus-induced Intestinal Toxicity and Synergizing with Its Processed Form against Ulcerative Colitis

Weiying Liu,Zijian Zhang,Wanxing Wu,Xiaoyu Yan,Yijia Huang,Han Feng,Qiaoxing Mou,Jie Wan,Mengfan Yan,Huayang Tang,Jie Liang,Ying Zhang,Cheng Peng,Xiaoqi Pan

Ethnopharmacological relevance Ulcerative colitis (UC) poses a major clinical challenge. Classical Chinese medical texts record the use of Crotonis Fructus (CF), the seeds of Croton tiglium L. , for treating conditions like “chronic dysentery” presenting symptoms similar to UC. However, the clinical application of both raw and processed CF is limited due to intestinal toxicity. Aim of the study This study investigates the role of gut microbiota in mitigating the intestinal toxicity induced by CF and in enhancing the anti-UC efficacy of its processed form. Methods Metagenomic analysis investigated CF-induced intestinal toxicity. The benefits of probiotics combined with CF or processed CF cream were evaluated in Caenorhabditis elegans ( C. elegans ) and a dextran sulfate sodium (DSS)-induced mouse model. Their combined effect was further assessed in DSS-exposed C. elegans , with qRT-PCR measuring intestinal barrier integrity. Results Metagenomic analysis revealed that CF-induced intestinal toxicity was associated with gut microbiota dysbiosis characterized by a pronounced reduction in Ligilactobacillus murinus ( L. murinus) . Supplementation with L. murinus alleviated CF-induced damage in C. elegans . In DSS-induced UC mice, both L. murinus and processed CF cream ameliorated colitis and suppressed TNF-α, IL-6, and IL-1β. When co-administered in DSS-exposed C. elegans , two agents acted synergistically, leading to greater restoration of intestinal barrier integrity and more pronounced upregulation of barrier-function genes. Conclusion This study demonstrates that L. murinus plays a dual role: it mitigates CF-induced intestinal toxicity and acts synergistically with processed CF cream to enhance UC treatment, providing a microbiome-based strategy for safer clinical application.

CAS / MDL: 599-79-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CARBOHYDRATE POLYMERS · 2026 · IF 13.2

Dual-crosslinked polysaccharide microspheres via glycated collagen and sodium alginate/chitosan for intestine targeted delivery of curcumin in ulcerative colitis treatment

Jing-jing Fu,Si-yi Mei,Yong-qiang Chen,Xiang-yu Fu,Yong-jie Long,Jun-xin Wu,Wen-qiang Cai,Yue-wen Chen

Polysaccharide-based hydrogel microspheres have demonstrated considerable potential for functional factors intestinal-targeted delivery and ulcerative colitis (UC) treatment. However, single-polysaccharide systems often struggle to achieve both stable loading and controlled release of functional factors. In this study, protein-polysaccharide composite microspheres were developed using a dual-crosslinking strategy. Initially, curcumin (Cur) was encapsulated within Andrias davidianus collagen (ADC) or its xylose glycated form (ADCXy) to form ADC/ADCXy-Cur complexes. These complexes were then crosslinked with sodium alginate (SA) and chelated with Ca 2+ ions to construct a primary hydrogel network (ADC/ADCXy-Cur-SA). Finally, the cationic polysaccharide chitosan (CS) with colon enzymolysis targeting, mucosal adhesion and pH responsive controlled release characteristics was incorporated with ADC/ADCXy-Cur-SA to form a double cross-linked multifunctional hydrogel microsphere (ADC/ADCXy-Cur-SA-CS). Compared with ADC-Cur-SA-CS, the ADCXy-Cur-SA-CS exhibited enhanced cellular antioxidant and anti-inflammatory activity, maintained high stability in simulated gastric conditions, and enabled controlled Cur release in colonic pH environment. In vivo experiments have shown that ADCXy-Cur-SA-CS alleviated UC based on the “one stone, four birds” strategy of antioxidant, anti-inflammatory, repairing the colon mucosal barrier, and regulating the gut microbiota. This study provides an important technical and theoretical foundation for the development of multifunctional polysaccharide-based hydrogel delivery systems.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FUEL · 2026 · IF 7.8

Cu@Ni/MoO3 core-shell catalyst for high efficiency methanolysis of hydrazine borane

Yunfeng Lei,Huilin Liu,Shunxiang Wang,Fu Ze Ho,Wen Da Oh,Yong Foo Wong,Yongjin Zou,Yong Shen Chua

Hydrazine borane (N 2 H 4 BH 3 ) has been recognized as an attractive hydrogen storage material owing to its high hydrogen capacity of 15.4 wt%. However, the methanolysis of N 2 H 4 BH 3 remains a challenge, as only BH 3 moiety of N 2 H 4 BH 3 can be utilized to produce H 2 . In the present work, we reported an efficient Cu@Ni/MoO 3 core–shell catalyst that is capable of fully utilizing the H atoms on both BH 3 and N 2 H 4 moieties of N 2 H 4 BH 3 via methanolysis, releasing 5.5 equivalents of gas at 50 °C. This study represents the most efficient catalyst for methanolysis of N 2 H 4 BH 3 reported to date. The improved catalytic activity of Cu@Ni/MoO 3 catalyst may be attributed to the collective improvement on the catalyst, which includes increased specific surface area of the catalyst, formation of an electron deficient Cu@Ni catalyst surface induced by MoO 3 and favorable reacting environment involving KOH as a catalyst promoter. The development of low-cost and highly efficient catalysts may encourage the application of N 2 H 4 BH 3 as a promising hydrogen storage material.

CAS / MDL: 12054-85-2 7758-99-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Advanced Research · 2026 · IF 17.1

Dental tissue repair stimulated by complex amorphous calcium phosphate supraparticles

Jiaolong Wang,Min Ge,Haiyan Yao,Yunyun Deng,Nan Wang,Meijiao Zhao,Caiqing Zhu,Lan Liao,Junchao Wei

Introduction Dentin hypersensitivity (DH) is caused by various external stimuli through exposed dentinal tubules (DTs). Amorphous calcium phosphate (ACP)-based biomineralization strategy exhibits promising potential in structural biomimicry and various biomedical applications. However, ACP is unstable and prone to spontaneous crystallization, and it requires a continuous supply of mineral ions to support further biomineralization. Developing a stable ACP complex with the ability to sustain release mineral ions may represent a promising strategy for DH treatment via occluding DTs. Objectives This study aims to construct novel biocompatible complex mesoporous bioactive glass@ACP (MBG@ACP) supraparticles with enhanced biomineralization capability to occlude DTs for treating DH. Methods MBG was synthesized via the sol–gel method, followed by amine functionalization with 3-aminopropyltriethoxysilane onto its pore surfaces. Then negative polyacrylic acid was adsorbed through amino-carboxyl group interactions, which subsequently induced ACP precipitation within the mesoporous channels to form complex MBG@ACP supraparticles. Results MBG@ACP supraparticles showed superior effects in stimulating apatite formation with a depth of DTs occlusion over 30 μm. Both the acid and abrasive challenge tests demonstrated that the biomineralized layer was well preserved and firmly bonded to the tooth surface. The in vivo tests demonstrated that MBG@ACP supraparticles could completely occlude the exposed DTs by the dense mineralization layer only after three days’ normal diet. Conclusion MBG@ACP supraparticles may offer a simple and efficient therapeutic strategy for treating DH, expanding the applications of MBG and ACP in biomedical fields.

CAS / MDL: 919-30-2 9003-01-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2026 · IF 8.8

Reverse interfacial polymerization of o-tolidine for stable organic solvent nanofiltration

Zhi-Qiang Pei,Qiaohong Liu,Shi-Xin Wei,Bo-Hao Chen,Quan-Fu An

To overcome the poor organic solvent resistance of conventional polymer membranes, this study developed a robust thin-film composite (TFC) membrane via reverse interfacial polymerization on a polyethylene (PE) substrate. Using o-tolidine (OT) and 1,3,5-benzenetricarbonyl chloride (TMC) as monomers, a high-permeability and highly crosslinked polyamide (PA) selective layer was successfully constructed. The influence of composition of the co-solvent, OT and TMC concentration on membrane morphology, surface chemistry, and separation performance was systematically investigated. The optimized TFC membrane exhibited excellent DMF permeance (4.03 Lm −2 h −1 bar −1 ) and high rejection (99.5%) of methyl blue, attributed to the formation of a compact yet permeable PA layer and electrostatic repulsion effects. Furthermore, the membrane demonstrated excellent long-term stability under harsh solvent conditions and elevated pressure, showcasing superior chemical and mechanical resilience. This work offers a practical and scalable approach for developing advanced solvent-resistant membranes suitable for dye removal in organic media.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS · 2026 · IF 5.9

Isopropanol-modulated ethyl acetate green antisolvent for enhancing the performance of CsPbBr3 perovskite solar cells

Zhifei Zhou,Chao Huang,Zhiwei Xiang,Yuanzheng Yang,Yanxue Wu,Weitong Cai

CsPbBr 3 perovskite solar cells (PSCs) have attracted increasing attention due to their superior thermal and environmental stability; however, their power conversion efficiency (PCE) remains limited by uncontrolled crystallization and high defect density during solution processing. Meanwhile, the widespread use of toxic antisolvents and the limited effectiveness of single control strategies necessitate the development of greener and more effective fabrication methods. To address these issues, this study introduces a green mixed antisolvent by incorporating isopropanol (IPA) into ethyl acetate (EA), coupled with a three-step spin-coating process for the deposition of CsPbBr 3 films. By adjusting the volume fraction of IPA in the mixed antisolvent, the crystallization of CsPbBr 3 films was effectively regulated, resulting in dense, uniform films with low defect density. At an optimal IPA volume fraction of 10%, dense and hole-free CsPbBr 3 films were obtained with markedly suppressed non-radiative recombination. As a result, the corresponding CsPbBr 3 PSCs exhibited a significantly enhanced PCE of 8.15%, compared with 5.63% for devices processed using pure EA. Moreover, the optimized device retained 97.9% of its initial efficiency after 30 days of storage under ambient conditions without encapsulation. This work provides a practical solution for fabricating effective and environmentally friendly inorganic perovskite photovoltaic devices.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2026 · IF 2.6

Ultra-efficient perfluorooctanoic acid capture enabled by a novel MOF-derived Cu/Zn bimetallic spherical porous carbon

Kunpeng Xue,Heng Lin,Dan Cao,Na Ma,Wei Dai,Limin Zhang

The efficient removal of perfluorooctanoic acid (PFOA) is challenging, as conventional monometallic MOFs and powdered activated carbons suffer from limited active sites, poor stability, or unfavorable morphologies. Herein, a novel spherical porous carbon (SPC) derived from Cu/Zn-BTC bimetallic MOF was synthesized via glucose-assisted hydrothermal carbonization and high-temperature pyrolysis. Featuring high sphericity, uniform pore channels, and abundant bimetallic active sites, SPC exhibits enhanced PFOA adsorption performance and water stability. The optimized SPC (5-(Cu/Zn-BTC)) achieves a maximum adsorption capacity of 480 mg/g (surpassing most reported materials), with pseudo-second-order kinetics and spontaneous exothermic adsorption behavior. Synergistic mechanisms dominate the process: Cu2+/Zn2+-carboxylate coordination (XPS verified), acidic-condition electrostatic attraction (Zeta potential supported), and hydrophobic interactions. Notably, SPC retains high adsorption efficiency after five regeneration cycles due to robust structural stability. This work exhibits certain potential application value in the field of PFOA removal from aqueous systems.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CARBON · 2026 · IF 12.7

Chemical prepotassiation design for long-cyclic graphite anode with inorganic-rich interphase

Kaixuan Li,Jiali Wang,Yueteng Gao,Yang Xiao,Jin Liang,Yujie Zhu,Baohua Li,Feiyu Kang,Dengyun Zhai

text Graphite is considered as a promising anode for potassium ion batteries due to low voltage plateau and reversible intercalation mechanism. However, it suffers from low initial Coulombic efficiency because of the undesired interfacial chemistry. Herein, an effective chemical prepotassiation strategy with K-4,4′-dimethylbiphenyl complex in the co-solvent of 1,2-diethoxyethane and cyclopentyl methyl ether is rationally designed. With a low redox potential of 0.18 V, this reagent enables effective prepotassiation for graphite anode via a certain soaking time. Moreover, benefitting from the dual weak solvation structure, it manifests exceptional weak solvation capability, which effectively protects the graphite structure after de-potassiation. Consequently, the prepotassiated graphite anode achieves a high ICE of 98.79 %. When paired with 3,4,9,10-perylenetetracarboxylic dianhydride cathode in a full cell, it delivers outstanding cycling stability exceeding 400 cycles at 500 mA g −1 with a capacity retention of 77.14 %. Characterization results of the interfacial formation pathway reveal that the pre-intercalation steps promote the preferential decomposition of anions in conventional carbonate electrolyte, leading to a thin and robust interface. Our work shows new perspectives in designing feasible prepotassiation system for high performance potassium ion batteries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。