Nature Communications
·
2026
·
IF 18.1
Ci Enda,Zhang Qingfeng,Li Qiyan,Wang Yan,Liu Xianglei,Yao Haichen,Wang Jianguo,Song Chao,Jiang Zhixing,Lv Shushan,Ren Tianze,Li Yongliang
Solar-driven thermochemical energy storage based on salt hydrates offers high energy density and long-duration storage, providing a promising route to mitigate the temporal mismatch between renewable energy supply and thermal demand. However, sluggish reaction kinetics, poor cycle stability, and low solar utilization efficiency remain long-standing challenges. Here, we demonstrate a synergistic shape-interface-channel ordering strategy that substantially enhances thermochemical energy storage performance through rational engineering of CaCl 2 -based pellets featuring red blood cell-mimic shape, nanoengineered hydrophilic interfaces, and hierarchical leaf veins-inspired channel networks. The optimized sample exhibits an ultrafast sorption rate coefficient of 0.03973 min −1 , a high sorption capacity of 885 mg g −1 , and a high energy storage density of 988.38 kJ kg −1 , with only 5.65% capacity decay over 1000 cycles (~3722 h). With further assistance of high solar absorptance of 97.72%, the desorption efficiency achieves as high as 93% within 60 min under one-Sun irradiation. This work establishes a general design paradigm for thermochemical energy storage pellets based on multiscale structural ordering, offering a pathway towards scalable solar-driven thermochemical energy storage.
✓ 已验证
产品关联
DOI
高影响因子
MOLECULAR NEUROBIOLOGY
·
2026
·Vol. 63
·期 1
·837
·
IF 5.5
Wang Yan,Yuan Bin,Li Yunzi,Sun Yan,Xie Yi,Cheng Hao,Zhang Yao,Wu Qi,Tang Jun
Neuropathic pain (NP) presents a significant challenge for patients with chronic diseases, characterized by spontaneous pain and hyperalgesia, with recent studies highlighting the involvement of the gut microbiota in its pathogenesis. Increasing evidence suggests that melatonin mitigates systemic inflammation and remodels gut microbiota. The present study further explored the mechanism by which oral melatonin ameliorates pain-related behavior following peripheral nerve injury. In this study, mice with chronic constriction injury (CCI) were orally administered melatonin (100 mg/kg) for 14 days. Pain behaviors were evaluated using mechanical allodynia and thermal hyperalgesia tests. Gut microbiota profiles were assessed via 16S rRNA sequencing, and microbiota-dependent effects were verified through antibiotic treatment (ABX) and fecal microbiota transplantation (FMT). Linoleic acid (LA) levels in serum and spinal cord were measured using liquid chromatography–mass spectrometry (LC–MS), and protein expression of NLRP3, caspase-1, and GSDMD in spinal cord tissue was examined by immunoblotting. Melatonin treatment significantly increased the mechanical pain threshold and prolonged thermal withdrawal latency in CCI mice. It also remodeled the dysbiotic gut microbiota, and these protective effects were abolished by antibiotic treatment but restored by FMT. Protein analysis revealed upregulation of NLRP3 and GSDMD in CCI mice, both of which were suppressed following melatonin administration. Moreover, melatonin-induced microbiota modulation elevated LA levels in serum and spinal cord. Supplementation with LA alone alleviated NP and inhibited NLRP3, caspase-1, and GSDMD activation. These findings suggest that oral melatonin treatment effectively ameliorates NP in CCI mice associated with the neuroinflammation and microbiota-metabolites-brain axis.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2026
·Vol. 28
·期 9
·221
·
IF 3.5
Li Rongye,Zhu Congying,Song Xiaoping,Zhang Xiaodong,Hamdi Marwa,Chen Jiahong
Recent advances in polymeric nanocarriers have highlighted the potential of amphiphilic block copolymers for the simultaneous delivery of chemotherapeutic agents with different physicochemical properties. In this study, asymmetric poly(ethylene glycol)-b-polylactide-b-poly(ethylene glycol) (PEG- b -PLA- b -PEG) triblock copolymers were synthesized via ring-opening polymerization, end-group functionalization, and click coupling, and subsequently evaluated as biodegradable nanocarriers for the co-delivery of paclitaxel (PTX) and cisplatin (CDDP). The copolymers were characterized by 1 H nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). Self-assembly in aqueous media yielded spherical micelles with uniform size distributions, as confirmed by transmission electron microscopy (TEM) and dynamic light scattering (DLS). The micelles exhibited efficient encapsulation of PTX and CDDP with high drug-loading capacities and encapsulation efficiencies. Hydrolytic degradation studies conducted at 37 °C for 45 days revealed progressive cleavage of the ester bond, reduction in molecular weight, and gradual disintegration of the micellar structure. In vitro release studies of single- and dual-drug-loaded micelles demonstrated sustained release of both drugs over time. Analysis of the release data using the Korsmeyer–Peppas model provided insight into the release behavior and suggested contributions from both diffusion and polymer degradation processes. The biocompatibility of the unloaded triblock copolymer micelles was assessed through cytocompatibility, hemocompatibility, and zebrafish embryo assays, which indicated low intrinsic toxicity and minimal hemolytic activity. Collectively, these results demonstrate that PEG- b -PLA- b -PEG triblock copolymer micelles can be recognized as biodegradable carriers capable of dual-drug encapsulation and sustained release, providing a useful platform for further investigation of combination drug delivery systems. Graphical abstract Asymmetric PEG- b -PLA- b -PEG triblock copolymers were synthesized and self-assembled into uniform micelles capable of co-encapsulating Paclitaxel and Cisplatin. The micellar architecture provided controlled degradation and synchronized dual-drug release over 45 days. The combination of tunable structure, sustained release, and excellent biocompatibility highlights these triblock copolymer micelles as efficient nanocarriers for combinational cancer therapy
✓ 已验证
产品关联
DOI
高影响因子
WATER AIR AND SOIL POLLUTION
·
2026
·Vol. 237
·期 20
·1157
·
IF 3.5
Zhou Qihua,Wang Chenyang,Xu Simin,Duan Ziyi,Fu Tiantian,Ding Zhonghai,Li Na
Pomegranate peel, a by-product of pomegranate fruit processing, is frequently discarded in substantial quantities. This agricultural waste contains an exceptionally high concentration of natural polyphenols, distinguished by abundant hydroxyl groups possessing dual hydrogen-bond donating and accepting capabilities. However, research on the fabrication of hydrogels from pomegranate peel polyphenols (PPP) for organic dye removal applications remains limited. In this research, polyvinyl alcohol/sodium carboxymethyl cellulose (PVA/CMC) hydrogel was first synthesized through freeze–thaw cycles, and subsequently soaked in an aqueous PPP solution to fabricate the PVA/CMC/PPP composite hydrogel. We employed Fourier transform infrared spectrometer, scanning electron microscope, X-ray photoelectron spectroscopy, and simultaneous thermal analyzer for hydrogel characterization. Our findings revealed a porous structure in the hydrogel, with PPP immersion enhancing its pore configuration and thermal stability. Swelling tests further revealed that PPP reduced the degree of hydrogel swelling. The combined action of PPP and the PVA/CMC hydrogel augmented the adsorption capacity for methylene blue (MB). The adsorption of MB conformed to the Freundlich isotherm model, and its kinetic behavior aligned more closely with the pseudo-second-order model. The PVA/CMC/PPP hydrogel preserved superior MB removal capability even after five cycling operations. Thus, the formulated PVA/CMC/PPP hydrogel holds promise as a promising candidate for organic dye extraction from water.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL AND BIOANALYTICAL CHEMISTRY
·
2026
·
IF 4.1
Wei Ming,Qin Yanxin,Ma Zhichao,Zhu Yunwei,Wang Yiran,Tong Wenting,Ma Lijuan,Lu Wenbo
The recycling of agricultural and electronic waste is pivotal to realizing the circular economy and green chemistry principles. This work successfully fabricated an electrochemical sensor using cattle manure and graphite rods from spent batteries, achieving quantitative determination of capsaicin (CAP) in pickled vegetables. Distinct from previous biochar-based sensors that focus on single waste streams or multi-step modifications, this work introduces a dual-waste synergistic upcycling strategy. The CoPc@SiO 2 @BC was prepared via a straightforward one-step pyrolysis process, which involved using cattle manure as the carbon source, and characterized by a suite of techniques. The CoPc@SiO 2 @BC was loaded onto a graphite rod recovered from spent batteries after simple surface treatment, forming a sensor that exhibited remarkable detection performance for CAP. It demonstrated a wide linear range from 0.5 to 1500 μM, a low detection limit of 0.26 μM, along with good selectivity, repeatability, and stability, confirming its capability for real-sample analysis. This synergistic utilization of dual waste resources not only reduces electrode fabrication costs but also enhances analytical sensing performance, thereby providing a novel pathway for developing green electrochemical sensing technologies.
✓ 已验证
产品关联
DOI
高影响因子
PHYSICS OF THE SOLID STATE
·
2026
·Vol. 68
·期 7
·645-650
·
IF 2.4
Huang Jinyan,Li Haichao,Guo Jianxia
Carbon nanomaterials, as pivotal representatives of forefront nanotechnologies, are advancing at a remarkable pace, driving global scientific, industrial, and socio-economic progress. To explore a straightforward yet effective route for the precise control over the morphology and dimensions of carbon nanostructures, this study employed a confined in-situ carbonization strategy. This approach successfully enabled the efficient synthesis of carbon nanosheets with tunable thicknesses under varied synthesis conditions. The resulting carbon nanosheets were systematically characterized using a comprehensive suite of analytical techniques. Scanning electron microscopy (SEM) was employed to examine their morphology and thickness, while Raman spectroscopy, X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) spectroscopy provided insights into their graphitic structure, crystallinity, and surface functional groups, respectively. Additionally, energy-dispersive X-ray spectroscopy (EDS) was utilized for elemental analysis. The data collected from these techniques were integral in guiding and refining the subsequent experimental design. It was hypothesized that by carefully modulating key synthesis parameters—primarily the concentration of the surfactant SB3-12, but also other conditions such as reaction temperature—carbon nanosheets could be efficiently synthesized within a unique reaction environment created by the physical encapsulation of a concentrated potassium sulphate solution. This experimental investigation holds significant value, as it contributes meaningful insights into the development of controllable synthetic methodologies for carbon nanostructures and provides a foundation for future research and application developments in this promising field.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2026
·Vol. 37
·期 20
·1565
·
IF 3.2
Yang Bowen,Zhang Siqi,Guan Mengxiang,Liu Lei,Yan Ziyu,Liang Yongri,Peng Guirong,Zhou Zhe
Owing to the outstanding ferroelectric properties, PVDF and its copolymers have emerged as the most promising piezoelectric polymer materials to date. To enhance the dielectric constant of P(VDF-HFP) while reducing its dielectric loss, BT@C@SiO 2 with a double-layer shell structure was synthesized and blended with P(VDF-HFP) to fabricate a piezoelectric film. Under mild conditions, PDA was synthesized as the precursor of the conductive carbon inner shell, which was carried out in a weakly alkaline Tris buffer system at room temperature, only involving stirring, centrifugation, water washing, and low-temperature drying, without any drastic reaction procedures. The results demonstrated that the incorporation of BT increased the dielectric constant of the film, whereas the introduction of the C layer formed micro-capacitors within the matrix, further enhancing the dielectric constant. Simultaneously, the C layer with high defect density captured freely mobile carriers in the film, thereby reducing AC conductivity and dielectric loss, which improved the energy harvesting efficiency of the piezoelectric film. The dielectric constant of the BT@C@SiO 2 /P(VDF-HFP) film could reach up to 15.8 (100 Hz), while the dielectric loss and conductivity were as low as 0.042 and 3.77 × 10 –9 S/m (100 Hz), respectively. The BT@C@SiO 2 acted as a nucleating agent in the P(VDF-HFP) matrix, and consequently induced the increase of the crystallization temperature and the formation of β phase in P(VDF-HFP). When the BT@C@SiO 2 content reached 5%, under a pressure of 40 N and a loaded resistance of 10 6 Ω, the composite film achieved its highest piezoelectric output with the output voltage of 1.1 V. Under a pressure of 40 N and a loaded resistance of 10 11 Ω, the piezoelectric output power reached its maximum value of 8.76 μW. A 5% BT@C@SiO 2 /P(VDF-HFP) film was fabricated into a piezoelectric sensor for practical applications. The output voltages of the film during finger bending, finger tapping and foot stepping were 0.40 V, 0.75 V, and 2.65 V, respectively. These results indicated that BT@C@SiO 2 /P(VDF-HFP) piezoelectric film exhibited potential application in motion monitoring.
✓ 已验证
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Liu Han,Wu Baohu,Hou Lei,Wu Peiyi
Developing artificial muscles with simultaneous high actuation performance and mild activation conditions is highly needed but still challenging. Here we broke the limitations through a hierarchical structure design of a dual-stimuli-responsive shape memory polymer (SMP) network, achieved by integrating a double-tail quaternary ammonium surfactant with poly(acrylic acid) via ionic complexation. Notably, the double‑tail surfactant exhibits a phase transition around 42 °C, enabling the mild‑temperature‑triggered actuation. The SMP‑based artificial muscle features a hierarchically nanophase‑separated structure, consisting of water‑responsive hydrophilic PAA domains and thermally responsive hydrophobic PAA/surfactant complex crystalline domains, thus decoupling the actuation stress and strain by different stimuli. The nanostructured artificial muscle achieves an actuation stress of up to 6.4 MPa (isometric) and an actuation strain of up to 79% (load-free), both under heating to ~42 o C, surpassing most existing actuators. Furthermore, the system exhibits self-reversible, force-free cyclic actuation. Our work offers a viable route for multi-scale structural engineering toward high-performance soft actuators.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2026
·
IF 18.1
Ni Sulin,Xia Dong,Chen Can,Qiu Cheng,Li Youzhi,Yang Bin,Hou Yang,Lei Lecheng,Mao Zhengwei,Li Zhongjian
A hybrid system combining water electrolysis and H 2 autotrophic microorganism enables sustainable CO 2 valorization, but is hindered by low H 2 bioavailability and sluggish hydrogenase kinetics. Here, we report an interface-engineered inorganic–biological biohybrid, constructed by covalently anchoring iron single-atom catalysts (ISA) onto Cupriavidus necator ( C.N @ISA) via click chemistry. The ISA anchored interface generates a localized H 2 -rich microenvironment, accelerates H 2 dissociation, while the synergy between ISA and polyethylene glycol-phenylboronate linker stabilizes the inorganic-biological hybrid interface and promotes electron/proton transfer across microbial membrane. These coupled effects boost reduced form of nicotinamide adenine dinucleotide (NADH) regeneration and adenosine triphosphate (ATP) synthesis. In addition, ISA exhibits nanozyme-like activity, scavenging reactive oxygen species to protect cell viability. As a result, C.N @ISA achieves CO 2 -to-bioplastic poly- β -hydroxybutyrate production of 1058.8 mg L −1 with a Faradaic efficiency of 42.0%. Integrating theoretical calculations, electrochemical analysis, and transcriptomics confirms that ISA simultaneously enriches and activates H 2 while reinforcing intracellular metabolism, offering a generalizable strategy for carbon-negative biomanufacturing.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2026
·Vol. 193
·期 9
·634
·
IF 5.4
Li Ce,Zeng Yutong,Wei Keyi,Li Xinyan,Wang Yan
Three exosome fluorescence-labeling workflows based on azide-functionalized cholesterol anchoring and copper-free click chemistry were systematically optimized and comparatively evaluated. A549 cell-derived exosomes were used as the primary model. By varying the sequence of azide introduction and fluorescent click reaction, one-step, two-step, and three-step protocols were compared. Under the tested conditions, the two-step protocol provided the most favorable overall balance among exosome recovery, fluorescence intensity normalized to exosome particle concentration, dye consumption, reaction volume, and operational simplicity. After labeling, the exosomes retained their typical morphology, particle size distribution, while the representative exosome-associated proteins CD63, CD81, and TSG101 remained detectable. The fluorescence intensity of the labeled exosomes showed a strong linear correlation with particle concentration, supporting its potential for rapid quantitative analysis. Cellular uptake experiments confirmed the feasibility of the labeled exosomes for in vitro imaging, and fluorescence remained detectable during the 24-h in vivo observation period. Overall, this study identifies an optimized two-step workflow for exosome fluorescence labeling and provides a practical approach for exosome visualization and tracking under the evaluated experimental conditions. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
npj Science of Food
·
2026
·
IF 9.7
Wang Juan,Li Xiang,Zhang Jing,Zhao Chao,Shi Xuening
Microbial Contamination serves as an important issue in dairy safety. CRISPR/Cas12a-based methods possess tremendous potential, but are limited by nucleic acid pretreatment and specialized operations. Herein, a photothermal nanomaterial-assisted enhanced One-Tube CRISPR/Cas12a system was established to detect S. typhimurium in milk . S. typhimurium was lysed through the photothermal effect to obtain genomic DNA. A multi-crRNA strategy enables rapid signal accumulation, and the whole system was integrated into a single tube via trehalose-based aqueous biphasic systems. The proposed method requires only one step of sample addition to achieve sensitive detection within 40 min, with an LOD of 10 CFU/mL, showing potential in application.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Food Measurement and Characterization
·
2026
·
IF 3.6
Ding Qian,Liu Shijie,Lin Kai,Zhao Lijun,Lee Jong-Hoon,Li Miaoyun,Liang Dong,Zhu Yaodi,Ma Yangyang
In this study, chicken was used as the base material, and a combination of fermentation regulation and whole egg incorporation was applied to systematically investigate the effects of protein degradation degree and whole egg synergism on the quality of chicken mince gels. First, chicken mince models with different degrees of protein degradation were constructed by controlling fermentation time. The degradation characteristics were evaluated by measuring pH, trichloroacetic acid (TCA)-soluble peptides, total volatile basic nitrogen (TVB-N), and SDS-PAGE, together with sensory evaluation to assess structural and flavor changes. Subsequently, composite gels were prepared by adding 10%, 20%, and 30% whole egg to the fermented chicken mince. The texture profile analysis (TPA), water-holding capacity (WHC), and cooking loss were systematically determined. The results showed that moderate protein degradation reduced gel hardness while generating a protein matrix suitable for subsequent gel modification. Whole egg incorporation subsequently improved gel texture, enhanced water-holding capacity, and reduced cooking loss, with the 30% addition level exhibiting the best overall quality. The addition of whole egg further optimized the gel network structure, increased gel strength, and reduced cooking loss, with the 30% addition level exhibiting the best overall quality. Finally, the swallowing properties were evaluated based on the International Dysphagia Diet Standardization Initiative (IDDSI). The results indicated that the optimized composite gels met the dietary requirements for individuals with dysphagia. Overall, this study elucidates the synergistic mechanism of protein degradation and whole egg incorporation in regulating the quality of chicken mince gels, providing a theoretical basis and technical support for the development of high-protein, animal-based gel foods tailored for dysphagia patients and the elderly population.
✓ 已验证
产品关联
DOI
高影响因子