JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2018
·
IF 5.091
Yunqing Pi,Lingjia Ma,Peng Zhao,Yangdan Cao,Huiqin Gao,Chunfeng Wang,Qilu Li,Shuying Dong,Jianhui Sun
A kind of Co-Fe Prussian blue analogues (Co-Fe PBAs), cobalt hexacyanoferrate Co 3 [Fe(CN) 6 ] 2 , and graphene oxide (GO) were combined to synthesize magnetically separable Co-Fe PBAs@rGO nanocomposites through a simple two-step hydrothermal method. The crystalline structure, morphology and textural properties of the Co-Fe PBAs@rGO nanocomposites were characterized. The catalytic performance of the nanocomposites was evaluated by PMS activation, with Levofloxacin Hydrochloride (LVF) as the target contaminant. Synergistic interactions between the Co-Fe PBAs and rGO prevented the aggregation of the Co-Fe PBAs nanoparticles, which resulted in enhanced degradation efficiencies. The influence of several critical parameters was investigated, including the reaction temperature, PMS and Co-Fe PBAs@rGO catalyst concentrations, solution pH and salt content. LVF degradation was favored at higher catalyst and PMS concentrations, high temperatures, and in neutral or weak acidic solutions. Sulphate radicals were the dominant active species in the Co-Fe PBAs@rGO/PMS system. In addition, the Co-Fe PBAs@rGO exhibited no significant decrease in LVF degradation efficiency following five catalytic cycles. Thus, the as-prepared Co-Fe PBAs@rGO nanocomposite catalyst might be applied to the removal of hard-to-degrade organics owing to its high catalytic ability to activate PMS, as well as its good reusability and recyclability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanoscale Advances
·
2020
·Vol. 2
·期 11
·5296-5304
·
IF 0
Hui Zhang,Jianping Zhang,Qianqian Zhang,Xiaofeng Liu,Yongtai Yang,Yun Ling,Yaming Zhou
In situ incorporating versatile magnetic iron nanoparticles into ordered mesoporous carbon (OMC) by means of synthetic methodology for functional integration is a great challenge. Inspired by the phenomenon of uniovular twins in nature, a homometallic [Fe9(μ3-O)4(O3PPh)3(O2CCMe3)13] ({Fe9P3}) cluster was synthesized and used as the ovulum to in situ produce dual-Fe nanoparticle (γ-Fe2O3 and Fe(PO3)3)-functionalized OMC (dual-Fe/OMC). In vitro magnetic resonance imaging (MRI) studies showed a longitudinal relaxation (r1) and transverse relaxation (r2) of 9.74 and 26.59 mM−1 s−1 with a r2/r1 ratio of 2.73 at 0.5 T. The MRI performances were further examined by mouse model with a subcutaneous HeLa tumor. In addition, the low cytotoxicity, considerable loading capacity and delivery of doxorubicin hydrochloride (DOX) were also studied in vitro. These results demonstrate the feasibility of the concept of uniovular twins in the one-pot preparation of dual-Fe/OMC for functional integration.
✓ 已验证
DOI
PubMed
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY
·
2017
·
IF 1.073
Xiaowei Cheng,Yongsheng Yang,Yongqiang Yang,Kaiqiang Liu,Kaiyuan Mei,Zaoyuan Li,Xiaoyang Guo,Wenhui Duan
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Lei Cao,Maliang Zhang,Kunmei Su,Feng Gu,Zhenhuan Li
Decorating porous carbon nanomaterials with rich homodispersed metal cluster and heteroatoms can effectively shorten the diffusion pathway of oxygen and expose more active sites, thereby promoting oxygen reduction reaction (ORR). Herein, hierarchical porous carbon nanorods with homodispersed Fe–N x –C active sites are obtained by calcination , etching and ammonia activation of Fe-nitrogenous acid (NTA) coordination polymer nanowires. The obtained Fe-PCNRs-700 as ORR catalysts show the excellent activity with half wave potential (E 1/2 ) of 0.71 V vs. reversible hydrogen electrode (RHE) in 0.5 M H 2 SO 4 and 0.87 V vs. RHE in 0.1 M KOH electrolyte, which owe to its huge specific surface area (1652 m 2 g −1 ), hierarchical pore structure , homodispersed Fe–N x –C active sites and structural defects. Furthermore, using Fe-PCNRs-700 as a cathode catalyst in both liquid and flexible solid Zn-air batteries, and the assembled liquid batteries display the high power density of 161 mW cm −2 and robust charge/discharge stability of 116 h.
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2022
·
IF 9.965
Hong Zhao,Huixue Yao,Shuting Wang,Yali Cao,Zhenjiang Lu,Jing Xie,Jindou Hu,Aize Hao
Highly efficient oxygen reduction and oxygen evolution reactions have the critical role in the practical application of zinc-air batteries. Herein, doping engineering strategy has been adopted by construction of Se/Fe-doped in Co 3 O 4 /N-doped carbon nanosheets (denoted as Se/Fe-Co 3 O 4 /N-CNs) catalyst for boosting oxygen electrocatalytic activity. The achieved Se/Fe-Co 3 O 4 /N-CNs catalyst presents high-performances electrocatalytic characteristics, which exhibits a small overpotential gap (0.79 V), excellent oxygen evolution reaction activity with a small overpotential of 361 mV and a low Tafel slope of 57.3 mV dec −1 at 10 mA cm −2 as well as excellent oxygen reduction reaction activity with a large half-wave potential of 0.8 V, also surpassing the majority of reported Co 3 O 4 -based electrocatalysts. The outstanding catalytic performances are benefiting from the contributions between Se/Fe doping engineering and N-doped carbon nanosheets optimizing the electronic structure of Co species, endowing more active sites, enhancing the intrinsic catalytic activity and accelerating charge transfer rate for oxygen electrocatalytic process. Particularly, the as-fabricated zinc-air batteries with Se/Fe-Co 3 O 4 /N-CNs as air cathode presents a high open circuit potential of 1.41 V, a prominent highly efficient peak power density of 141.3 mW cm −2 , a high specific capacity of 765.6 mAh g −1 and energy density 861.3 Wh kg −1 at current density of 10 mA cm −2 as well as an excellent cycling stability, which are exceeding the commercial Pt/C-RuO 2 based zinc-air batteries. This work lays a foundation for design and development of high-performance bifunctional cobalt-based electrocatalysts for rechargeable metal-air batteries application.
✓ 已验证
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2018
·
IF 8.097
Hongju Zeng,Wang Wang,Jun Li,Jin Luo,Shengli Chen
Heteroatoms doping is able to produce catalytic sites in carbon materials for oxygen reduction reaction (ORR); while hierarchically porous structure is necessary for efficient exposure and accessibility of the usually limited catalytic sites in such activated carbon catalysts. This work reports an in situ generated dual-template method to synthesize the Fe/N/S co-doped hierarchically porous carbon (FeNS/HPC), with NaCl crystallites formed during the precursor lyophilization process as the primary template to generate ∼500 nm macropores with ultrathin graphene-like carbon-layer walls, and Fe3O4 nanoparticles formed during the high-temperature carbonization process as the secondary template to produce mesopores on the walls of macropores. As well as the coexistence of graphitic-N, pyridinic-N, and thiophene-S which are beneficial to ORR, the as prepared FeNS/HPC possesses a highly graphitized and interconnected hierarchical porous structure, giving a specific surface area as high as 938 m2 g–1. As a consequence, it exhibits excellent four-electron oxygen reduction performance in both alkaline and acid electrolytes. The in situ generation and facile solution removal make the present template method a promising way for scale-up preparation of active porous carbon materials for various applications.
✓ 已验证
DOI
PubMed
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·Vol. 30
·期 31
·77488-77498
·
IF 5.8
Lan Bingyan,Hao Chenhui,Zhang Mengze,Yan Xiaomin
Two in situ formed Fe(III) oxyhydroxides (FeO x ) originated from ferrate reduction (designated FeO x –Fe VI ) and ferrous oxidation by H 2 O 2 (designated FeO x –Fe II ) were compared in the aspects of morphology, hydrolyzed species, surface binding mechanism of lead. The theoretical maximum adsorption capacity calculated from the Langmuir model toward Pb(II) was 929.54 and 810.37 mg/g Fe by FeO x –Fe VI and FeO x –Fe II , respectively. At pH 6 and the same Fe/Pb ratio, the kinetic rate of Pb removal by the FeO x –Fe VI process was 8 times faster. FTIR, SEM, and Ferron assay suggest FeO x –Fe VI was associated with a lesser polymerization degree and contained more reactive hydroxyl-Fe polymers than those in the FeO x –Fe II sample. SAXS verified that the particles possessed a smaller, more homogeneous, and open structure when Fe was hydrolyzed by ferrate reduction than ferrous oxidation. XPS coupled with fractal analysis suggests the different sorption capacities of Pb(II) can be ascribed to their distinct growth patterns. Fast cluster agglomeration during FeO x –Fe II fabrication decreased the exposure of effective adsorption sites. In comparison, the incompact assemblies of FeO x –Fe VI clusters facilitated Pb(II) ions to access the interstices of octahedral FeO 6 units and formed an edge-sharing complex. This work provides new insight into mechanisms of particle fabrication and heavy metal removal of Fe(III) formed in situ.
✓ 已验证
DOI
PubMed
高影响因子
RSC Advances
·
2022
·Vol. 12
·期 46
·30145-30156
·
IF 4.036
Haoming Ning,Zhi Zhang,Chunhai Shi,Xiaolei Ma,Jian Li,Hongyi Zhu,Jiawei Hu
In this study, Fe/N codoped porous graphitic carbon derived from macadamia shells was prepared at different temperatures as cathodic catalysts for microbial fuel cells (MFCs), with K2FeO4 as a bifunctional catalyst for porosity and graphitization. The catalyst prepared at 750 °C (referred to as MSAC-750) showed a large specific surface area (1670.3 m2 g−1), graphite structure, and high pyridine-N and Fe-NX contents. Through the electrochemical workstation test, MSAC-750 shows excellent oxygen reduction reaction (ORR) activity, with an onset potential of 0.172 V and a half-wave potential of −0.028 V (vs. Ag/AgCl) in a neutral medium, and the ORR electron transfer number is 3.89. When applied to the MFCs as cathodic catalysts, a higher maximum power density and voltage of 378.68 mW m−2 and 0.425 V were achieved with the MSAC-750 catalyst and is superior to that of the Pt/C catalyst (300.85 mW m−2 and 0.402 V). In this case, a promising method is hereby established for the preparation of an excellent electrochemical catalyst for microbial fuel cells using inexpensive and easily available macadamia shells.
✓ 已验证
DOI
PubMed
高影响因子
WATER RESEARCH
·
2021
·
IF 11.236
Xiaoyu Liu,Shunke Ding,Pin Wang,Yuntao Hong,Hongying Zhao,Wenhai Chu
To remove disinfection by-product (DBP) precursors and mitigate odor compounds, peroxide (peroxymonosulfate and persulfate)/Fe(II)-based process was applied as a combination of coagulation and oxidation. Compared with traditional Fe-based salt coagulation (FeSO 4 and FeCl 3 ), peroxide/Fe(II)-based process was more efficient in dissolved organic carbon , UV 254 and turbidity removal, and peroxymonosulfate showed better performance than persulfate. The better coagulation performance arose from a combination of enhanced neutralization and different characteristics of flocs. Even though the combined process would increase the bromine substitution factor of DBPs, DBP formation and DBP-associated toxicity after peroxide/Fe(II)-based process were 9.2–38.8% and 5.2–27.2% lower than that after conventional Fe(III) coagulation. Both enhanced dissolved organic matter removal and oxidation of DBP precursors played vital roles in DBP control. Conventional Fe-based salt coagulation could hardly remove odor compounds (less than 10%, generally), whereas 28.2–84.9% of odor compounds were degraded during peroxide/Fe(II)-based process, due to free radical formation. This study demonstrated that PMS/Fe(II)-based process might be a promising treatment process for simultaneous DBP control and odor removal in source water.
✓ 已验证
DOI
PubMed
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2021
·
IF 7.963
Ze Lin,Xiulan Weng,Nasreen Islam Khan,Gary Owens,Zuliang Chen
The annual influx of antimony (Sb) into the environment due to the widespread use of Sb compounds in industry and agriculture has become of global concern. Herein, a functional nanomaterial composite based on loading bimetallic iron/nickel nanoparticles on reduced graphene oxide (rGO-Fe/Ni) was initially prepared in a one-step phytogenic synthesis using a green tea extract. Subsequently, when applied for Sb(III) removal, the removal efficiency of rGO-Fe/Ni reached 69.7% within 3 h at an initial Sb concentration of 1.0 mg·L −1 . Advanced materials characterization via scanning electron microscopy-energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy revealed that Sb(III) was initially adsorbed onto the surface of rGO and then oxidized to Sb(V). This result was also supported by adsorption isotherm, kinetics, and thermodynamic analysis. These studies revealed that the adsorption was spontaneous and endothermic, following a Langmuir adsorption model with pseudo-second-order kinetics and allowed a Sb(III) removal mechanism based on adsorption and catalytic oxidation to be proposed. Furthermore, when rGO-Fe/Ni was practically used to remove Sb(III) in groundwater a 95.7% removal efficiency was obtained at 1 mg·L −1 Sb(III), thus successfully demonstrating that rGO-Fe/Ni has significant potential for the practical remediation of Sb contaminated groundwater.
✓ 已验证
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2022
·
IF 8.943
Qian Zhong,Jin Liu,Junting Wang,Yuan Li,Jun Li,Gaoke Zhang
To activate peroxymonosulfate (PMS) is an efficient way for decomposition of non-biodegradable organic pollutants. Herein, Mg–Fe layered double oxides decorated with Ti 3 C 2 MXene-derived TiO 2 @C (T/LDOs) were fabricated to efficiently activate PMS for the degradation of Rhodamine B (RhB), acid red 1 (AR1), methylene blue (MB), and tetracycline hydrochloride (TC). The T/LDOs catalyst could decompose 95.8% of RhB, 94.8% of AR1, 84.9% of MB within 10 min, and 82.4% of TC within 60 min. The degradation rate constant of RhB in the optimal T/LDOs/PMS system was approximately 2.5 and 15.7 times higher than that in the Mg–Fe LDOs/PMS system and Mg–Fe LDH/PMS system, respectively. Importantly, the T/LDOs exhibited a wide working pH range (3.1–11.0) and high stability with low metal ions leaching, indicating its potential practical applications. Quenching experiments and electronic spin resonance results confirmed that both • O 2 − and 1 O 2 were the dominant active species in the T/LDOs/PMS system. In addition, the possible degradation pathway of RhB in the 5%-T/LDOs/PMS system was proposed. Finally, the catalytic mechanism study revealed that the T/LDOs with abundant surface hydroxyl groups and a certain amount of TiO 2 @C facilitated the electron transfer between ≡Fe (Ⅲ) ‒OH complex and HSO 5 − , boosting the generation of • O 2 − and 1 O 2 . This study provides an insight into exploiting highly efficient catalysts for PMS activation towards the degradation of organic pollutants.
✓ 已验证
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Zhenwei Lu,Keqiang Zhang,Fuyuan Liu,Xingliang Gao,Zhongwei Zhai,Jiajia Li,Lianzhu Du
Currently, the closure of the nutrient circular loop and contaminant removal from wastewater are drawing widespread attention. In this study, a novel MgO/iron oxide-modified NaY zeolite (MNZ) was prepared and used for the integration of adsorption and struvite precipitation to simultaneously reclaim ammonium and phosphate from wastewater. The results proved that MgO and iron oxide nanoparticles were successfully embedded in the zeolite matrix, providing high adsorption performance for ammonium and phosphate, reaching 380.02 (as NH + 4) and 324.68 (as P T ) mg/g, respectively. The presence of NO 3 − , Cl − , SO 4 2− , and HCO 3 − did not significantly influence the adsorption of ammonium and phosphate. Struvite precipitation on the MNZ surface is the primary mechanism for the recovery of both ammonium and phosphate with electrostatic attraction and ion exchange also involved in ammonium uptake. These results indicate that optimized MNZ is promising for nutrient recovery from wastewater because of its high selectivity for targeted absorbates and its potential application as a slow-release eco-fertilizer.
✓ 已验证
DOI
高影响因子