INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2016
·
IF 2.567
Jian Jian,Kuiyi You,Qing Luo,Hongxu Gao,Fangfang Zhao,Pingle Liu,Qiuhong Ai,He’an Luo
Developing an economic and efficient approach for the production of adipic acid is a grand challenge in the chemical industry. Toward this goal, we report a simple method for selective synthesis of adipic acid from cyclohexane with NO2 by using Ni–Al–VPO/MCM-41 as catalyst. The physical-chemical properties of supported Ni–Al–VPO/MCM-4 catalysts were characterized, the reaction conditions were optimized, and the reusability of the catalyst was examined. The results showed that the supported 30%Ni–Al–VPO/MCM-41 catalyst exhibited excellent catalytic performance with 65.1% of cyclohexane conversion and 85.3% of selectivity toward adipic acid, especially, its catalytic performance was still stable after five runs. Maybe this developed method has potential industrial application prospects for production of adipic acid.
✓ 已验证
DOI
高影响因子
Materials Science and Engineering B-Advanced Functional Solid-State Materials
·
2024
·
IF 3.9
Kashif Nawaz Khattak,Maosen Zhang,Caixia Deng,Shuang Li,Ling Jiang,Pran Gopal Karmaker,Xiupei Yang
In this work, the hybrid material NH 2 -MIL-125(Ti)@TpPa-NO 2 was synthesized by grafting an amino-functionalized titanium-based metal–organic framework (NH 2 -MIL-125(Ti)) with 2,4,6-tri(4-pyridyl)-1,3,5-triazine-nitro (TpPa-NO 2 ) moieties. The resulting composite material exhibited remarkable removal efficiency owing to the synergistic effects derived from the combination of the NH 2 -MIL-125(Ti) and TpPa-NO 2 components. The material demonstrated excellent stability and recyclability, making it a promising candidate for the treatment of wastewater containing rhodamine-B (Rhd-B). Some characterization techniques were employed to elucidate the structural features and surface morphology of the hybrid material. The adsorption capacity of NH 2 -MIL-125(Ti)@TpPa-NO 2 for Rhd-B dye was evaluated, and the results revealed an exceptional removal efficiency of 99.96 % and a high adsorption capacity of 25.54 mg/g, highlighting the superior adsorption performance of the material. The adsorption process was found to follow Langmuir isotherm and pseudo-second-order kinetics, indicating that chemisorption is the predominant mechanism governing the uptake of Rhd-B dye onto NH 2 -MIL-125(Ti)@TpPa-NO 2 .
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2024
·
IF 5.7
Jing Feng,Lei Feng,Shuo Sun,Xujie Wang,Huitian Zhi,Ruhui Shang,Yingchao Yang,Luyao Wang,Zhengquan Yan,Lei Hu
Background NO 2 − and S 2− are two kinds of common toxic anions widely distributed in environmental water, soil and food products. Human beings have suffered a lot of diseases from intake of excessive NO 2 − or S 2− , i.e ., infantile methemoglobin , cancer and even to death. Although tremendous efforts have been afforded to monitor NO 2 − and S 2− , most were high instrument-depended with complex processing procedures. To keep food safety and to protect human health, it will be a huge challenge to develop a convenient and efficient way to monitor S 2− and NO 2 − in practice. Results A kind of folic acid capping Bi 3+ -doped Ag quantum dots (FA@Bi 3+ -Ag QDs) was developed for the first time by one-pot homogeneous reduced self-assembly. Not only did FA@Bi 3+ -Ag QDs possess intrinsic fluorescent property, it expressed synergistic peroxidase-like activity to catalyze the redox of 3,3′,5,5′-tetramethylbenzidine (TMB) and H 2 O 2 with K m / v max of 0.087 mM/6.61 × 10 −8 M s −1 and 6.42 mM/6.25 × 10 −7 M s −1 respectively. Interestingly, trace S 2− could exclusively alter its fluorescent property and peroxidase-like activity, exhibiting significant hypochromic and “turn-on” fluorescent effects. While trace NO 2 − could make FA@Bi 3+ -Ag QDs-TMB-H 2 O 2 system hyperchromic. Under the optimized conditions, FA@Bi 3+ -Ag QDs were applied for dual-mode recognition of S 2− and visual sensing of NO 2 − in real food samples with satisfactory recoveries, i.e ., 100.7–107.9 %/95.8–104.7 % and 97.2–104.8 % respectively. The synergistic enzyme-mimic mechanism of FA@Bi 3+ -Ag QDs and its selective response mechanisms to S 2− and NO 2 − were also proposed. Significance This represents the first nanozyme-based FA@Bi 3+ -Ag QDs system for dual-mode recognition of S 2− and visual sensing of NO 2 − , well meeting the basic requirement in drinking water set by WHO. It will offer a promising way for multi-mode monitoring of different pollution using the same nanozyme-based sensor.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Jinbo Zhang,Jian Zhou,Hui Chen,Yanghui Liu,Dongfang Liang,Yihao Guo,Yihan Zhao,Yongqing Fu,Huigao Duan
There is a great concern for nitrogen oxide (NO 2 ) due to its hazardous effects on environment and human health, therefore, many types of NO 2 sensors have been proposed. Among them, surface acoustic wave (SAW) NO 2 sensors show intrinsic advantages such as wireless monitoring, but their combined sensitivities, responses, and limits of detection operated at room temperature remain huge challenges. In this study, we proposed an integration strategy in which graphene oxide-molybdenum disulfide/tin dioxide (GO-MoS 2 /SnO 2 ) ternary composite film was rationally designed on a SAW resonator for detection of low concentrations of NO 2 at room temperature (25°C), and its response speed are enhanced with ultraviolet (UV) light irradiation. Characterization results revealed that MoS 2 and SnO 2 formed the MoS 2 /SnO 2 heterojunctions through interfacial chemical bonds of S-Sn-O, and the GO-MoS 2 /SnO 2 ternary composite showed a hierarchical structure with the heterojunctions exposed and covered by the flake-structure GO. It achieved a large specific surface area of 111.6 m 2 /g, abundant functional groups, and numerous surface defects, providing plentiful adsorption and reaction sites of NO 2 . The developed NO 2 sensor showed a low limit of detection of 1 ppm, a high sensitivity of ∼164.77 Hz/ppm, and fast response/recovery time of 16.4 s/19.1 s, as well as excellent repeatability, selectivity, and long-term stability. The key sensing mechanisms were identified as the large surface areas of the stacked composite leading to the increased adsorption and reaction sites, enhanced conductivity through the MoS 2 /SnO 2 heterojunctions, and numerous photogenerated charge carriers produced by UV activation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Yu Qiao,Jinniu Zhang,Jia Liu,Yumeng Liu,Xinlei Zhang,Zhibo Yang,Xiaoqiang Yin,Jianzhi Gao,Chunlan Wang,Hongbing Lu
NO 2 is one of the most important atmosphere pollutants, causing great harm to the human body at very low concentrations (ppb levels). Herein, a novel fabrication idea for gas sensing materials was reported to detect ppb-level NO 2 via MOF-derived porous In 2 O 3 nanospheres (NSs) sensitized by CdS quantum dots (QDs). The good distribution of CdS QDs (2.5–4.0 nm) on porous In 2 O 3 NSs was verified by the transmission electron microscopy and element mapping analyses. In comparison to In 2 O 3 NSs, the CdS@In 2 O 3 composite nanospheres (CNSs) exhibited exceptional responses to ppb-level concentrations of NO 2 ( S =425.1@100 ppb) at room temperature (RT, 25 °C), while also demonstrating good selectivity and response reproducibility. These improvements in sensing performance were attributed to the synergies of the electronic effects of CdS QDs, MOF-derived porous nanostructures , and enhanced adsorption of NO 2 and active O 2 – by well-dispersed CdS QDs. This work emphasizes that the MOF-derived In 2 O 3 porous NSs sensitized by CdS QDs can accurately detect ppb-level concentrations of the NO 2 at RT.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2024
·
IF 3.8
Jingwen Qian,Susu Liu,Zhongyu Wang,Mingyi Yu,Zheng Lian,Shule Zhang,Qin Zhong
In the typical wet flue gas denitration technology using sulfite solutions, the rapid free radical chain reaction of SO3•– oxidation by O2 is the main reason for the significant consumption of absorbents and inefficient denitration. The study utilizes l-ascorbic acid (VC) to inhibit the free radical chain reaction. VC combined with SO3•– to form stable compounds, which hindered the oxidation of SO3•– to SO5•– by O2, leading to an 80.7 mol % decrease in Na2SO3 consumption by adding millimolar-level VC. Compared to the sulfite solution, the best denitration efficiency of the VC/Na2SO3 mixture solution increased from 94.4 to 99.2 vol %, and the absorption time for absorption efficiency above 90 vol % was extended from 7 to 72 min. Additionally, a macro absorption model describing the rates of macro absorption was established based on various operating conditions.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2024
·
IF 8
Zhidong Jin,Jinbo Zhao,Lin Liu,Fei Liu,Dewen Zhao,Zhou Wang,Fenglong Wang,Jiurong Liu,Yue Mou,Lili Wu
Realizing nitrogen dioxide (NO 2 ) detections based on semiconductor-based gas sensors with high tolerance to humidity conditions is deemed to be a long-term challenge. To independently acknowledge the physiosorbed-water influence mechanism on semiconductor-based sensors, hydrophobic zeolitic imidazolate framework-8 (ZIF-8) covered chemisorbed-oxygen-nonexistence zinc hydroxyfluoride (ZnOHF) snowflake-like nanorod bundles are synthesized for NO 2 detections with non-hindrance of interfering gases and high humidity in our work. Gas-sensing testing results display that the 0.6ZIF-8/ZnOHF-based gas sensor provides an optimum NO 2 response of 12.1–10 ppm NO 2 at the operating temperature of 200 ℃ with excellent NO 2 selectivity. As the relative humidity (RH) increases from 20% RH to 80% RH, the response of the 0.6ZIF-8/ZnOHF sensor shows a marginal fluctuation of only 13%, exhibiting outstanding anti-humidity characteristics towards NO 2 detections, the outperformed NO 2 selectivity and humidity tolerance of which are greatly attributed to the unique band structures of ZnOHF and the surficial hydrophobic treatment by ZIF-8, which is further validated via In-situ diffuse reflection infrared Fourier transform spectroscopy ( In-situ DRIFTS) and electronic structure analyses. Humidity impact on ZnOHF poses a persuasive evidence for establishing the separate physiosorbed water interfering mechanism on semiconductors. This work endows a perspective on optimizing humidity tolerance for semiconductor-based sensors at low operating temperature.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2012
·Vol. 47
·期 11
·3277-3282
·
IF 2.105
Jing Bo Zhang,Xiao Ning Li,Shou Li Bai,Rui Xian Luo,Ai Fan Chen,Yuan Lin
Well-crystallized one-dimensional (1D) SnO 2 nanobelts were in situ prepared using a simple water-assisted chemical vapor deposition (CVD) method. The small Sn particles with Au-modifications were used as source materials instead of big size Sn grains to ensure the high yield of SnO 2 belts. The Au layer was modified on the small Sn particles by treating Sn powders in HAuCl 4 solution combined with the UV irradiation. The as-prepared SnO 2 nanobelts were characterized by SEM, HRTEM, XRD, EDS and XPS. These results indicate that the growth temperature plays an important role in controlling the length-to-width ratio of nanobelts. The length-to-width ratio decreases with the growth temperature from 850 °C to 1000 °C. The nanobelts prepared at 850 °C shows a single-crystalline tetragonal rutile phase with a high length-to-width ratio (approximately tens of microns in length and 40–70 nm in width). However, below 850 °C, nanobelts cannot be formed. The as-prepared nanobelts exhibited excellent sensing properties compared with SnO 2 nanoparticles and high sensing selectivity towards NO 2 . The high sensing selectivity to NO 2 is attributed to the oxygen vacancies presenting in the as-prepared nanobelts.
研究领域:
材料科学
·
纳米技术
·
传感器学
·
无机化学
·
半导体材料
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2026
·
IF 8.3
Chen Chen,Sijie Chen,Yu Zhang,Jinhong Liu,Shenghui Xia,Vishal Chaudhary,Praveen Sekhar,Larry Nagahara,Chao Wang,Hui Zhang,Pengfei Cheng,Pradeep Bhadola,Wei Liu,Thomas Thundat,Zhimin Li,Ajit Khosla
Pristine metal oxide gas sensors often suffer from poor selectivity and limited polarizability. The objective of this work is to overcome these bottlenecks by developing an advanced material tailored specifically for highly sensitive and intelligent NO 2 sensing applications. Consequently, oxygen vacancy-rich 2D ultrathin Cs-doped WO 3-x nanosheets were synthesized via a solvothermal method. KPFM, UPS, and TAS confirmed that optimal Cs doping (0.08 mol%) optimizes the surface work function and drastically prolongs the photo-generated carrier lifetime (
✓ 已验证
DOI
高影响因子
Journal of the Iranian Chemical Society
·
2026
·Vol. 23
·期 1
·33
·
IF 2.4
Yan Jiaqi,Fu Weiwen,You Kuiyi,Zhao Fangfang,Luo He’an
A mild and efficient method for the solvent-free catalytic nitration of o-xylene (OX) employing silicon sulfonic acid (SSA) as a catalyst and NO 2 as a clean nitrating agent, leads to high selectivity for 4-nitro-o-xylene (4-NOX). Under optimal conditions, a 64.6% selectivity for 4-NOX and a 46.7% conversion of OX were achieved. The results showed that the enhanced OX conversion and target product selectivity were attributed to the synergistic catalysis of the combination of the SSA catalyst and the NO 2 –O 2 system. The characterization results showed that the immobilized SSA, which is not only simple and economical to prepare but also exhibits excellent nitration activity, was effectively synthesized via the chemical bonding method. The highly dispersed sulfonic acid groups were covalently anchored to the surface of the silicon acid (SA), thereby enriching acid sites and stabilizing the catalytic performance. Additionally, a possible reaction mechanism for nitrating OX with NO 2 –O 2 over the SSA catalyst was proposed. Compared with the traditional method, this study promotes the selectivity of the target product while reducing acidic wastewater streams, indicating potential application prospects.
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Yaqing Zhang,Zhimin Yang,Liang Zhao,Yunpeng Xing,Congcong Xin,Zefeng Wei,Teng Fei,Sen Liu,Tong Zhang
Reduced graphene oxides (RGO)-based materials exhibit high carrier mobility and selective recognition ability to NO 2 , making them constitute promising platform for room-temperature NO 2 detection. However, the low sensitivity becomes the main bottleneck for their further development. Here, we demonstrate that synergy of Pd nanoparticles (NPs) and oxygen vacancies can modulate the surface active sites over SnO 2 NPs modified RGO hybrids (labeled as SR), leading to improving the sensitivity of room-temperature NO 2 sensors. Experimentally, a wet-chemical method was used to introduce oxygen vacancies onto SR, leading to forming SR with rich oxygen vacancies (labeled as SR-Vo), which were subsequently deposited with Pd NPs, resulting in preparing Pd NPs loaded SR-Vo hybrids (labeled as Pd-SR-Vo). Impressively, the response value to 1 ppm NO 2 of Pd-SR-Vo hybrids reaches to 9.8, which is much higher than that of R-Vo hybrids (5.6) and SR hybrids (3.3). The improvement of sensitivity toward NO 2 for Pd-SR-Vo hybrids is attributed to the synergy effect of Pd NPs and oxygen vacancies, including shortening the band gap of Pd-SR-Vo hybrids with raising conduction band level, widening the width of electron depletion layer between SnO 2 -Vo and RGO, introducing Schottky contact between Pd and SnO 2 -Vo, improving efficiency for gas sensing reaction. This work not only provides an efficient approach to fabricate high-performance NO 2 sensors, but also opens a new avenue for sensing materials design and modification.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Yan Jiang,Ping Wang,Ji Li,Xianfa Zhang,Yingming Xu,Hui Zhao,Xiaoli Cheng,Shan Gao,Lihua Huo
The porous and tubular structure is conducive to improving performance of sensing materials. At present, how to obtain sensitive materials with unique porosity and high surface activity by green, low-cost and simple synthesis methods is still a challenge. In this work, novel In 2 O 3 porous microtubes were obtained by water etching of MIL-68-In and calcination methods for the first time. The as-prepared microtubes exhibit excellent NO 2 sensitivity at 50 ℃ (S=156–3 ppm NO 2 ), and the limit of detection is 50 ppb. The sensor also has good NO 2 detection ability in the actual environment. The excellent NO 2 sensing performance at low temperature is closely related to high surface activity of In 2 O 3 porous microtubes. Combined with TPD, in-stiu DRIFT and XPS technologies, the NO 2 sensing mechanism was detailed analyzed. This work provides useful guidance for constructing high performance NO 2 sensor. The excellent NO 2 sensing performance at low temperature makes a positive contribution to promoting the application of metal oxide sensors in environmental detection.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）