AQUACULTURE INTERNATIONAL
·
2016
·Vol. 24
·期 5
·1229-1245
·
IF 0.96
Huang Yisheng,Wen Xiaobo,Li Shengkang,Li Wenjia,Zhu Dashi
The present study aimed at determining the growth performance, feed utilization, body composition and antioxidant status of chu’s croaker ( Nibea coibor ) juveniles fed with increasing levels of dietary lipid: 6 % (D6), 9 % (D9), 12 % (D12) and 15 % (D15). Each diet was assigned to triplicate groups of fish in a total of 12 floating pens (300 fish, 25 fish per pen). After a 49-day growth trial, survival rate was not affected. D12 and D15 led to significantly higher specific growth rate (SGR). Fish fed D12 showed the highest protein efficiency ratio (PER), protein and lipid retention efficiencies (PER and LRE, respectively). The hepatosomatic and viscerosomatic indexes (HIS and VSI, respectively) increased, while feed conversion ratio (FCR) and feed intake (FI) decreased. Body protein, ash and muscle lipid contents were not significantly affected, but significantly higher body and liver lipid were noticed in fish fed with D15. Monounsaturated fatty acid (MUFA) was found to decrease compared to the experimental diets in muscle, while high unsaturated fatty acid (HUFA) was selectively accumulated in all treatments. Serum alanine transaminase (ALT, 14.13–22.53 U/L), aspartate transaminase (AST, 34.31–51.25 U/L), cholesterol (CHO, 2.02–3.03 mmol/L) and triglyceride (TG, 5.61–8.50 mmol/L) were correlated with increasing dietary lipids. Liver malate dehydrogenase (MDA, 3.32–6.67 mmol/L) and superoxide dismutase (SOD, 42.69–52.86 U/mg prot) increased with dietary lipids, while total antioxidant capacity (t-AOC, 1.08–3.50 U/mg prot) decreased. Polynomial regression analyses between SGR and dietary lipid levels showed that the optimal dietary lipid requirement of chu’s croaker is 12.9 % of dry matter.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLID STATE ELECTROCHEMISTRY
·
2016
·Vol. 20
·期 5
·1377-1389
·
IF 2.327
Hui Yuchen,Ma Xiaoyan,Qu Fengjin,Chen Fang,Yu Jie,Gao Yan
A facile strategy is developed to fabricate an Au-CMCD/PCMCD electrode with high efficiency, universal, and selectivity electrocatalysis through electro-depositing carboxymethyl-β-cyclodextrins with gold nanoparticles (Au-CMCD) followed by employing electro-polymerization carboxymethyl-β-cyclodextrin (PCMCD). The chemical structure, microstructure, electrochemical activity, and electrocatalytic properties of Au-CMCD/PCMCD electrode are investigated. Due to the synergistic effect of the PCMCD and Au-CMCD layers, the as-prepared electrode exhibits an outstanding enhancement of universal electrocatalytic activity to eight kinds of crucial biomolecules and drugs, such as chloramphenicol, thymine, and glucose. Then, as a target analyte, glucose is used to investigate the sensing performances of Au-CMCD/PCMCD electrode. The amperometric detection of glucose shows a wide linear range expanding to 0.001∼110 mM with a low detection limit of 0.99 μM. More importantly, the absorption effect of PCMCD is stronger to glucose than other interfering species, which is favorable to avoid the influence of possible interfering substances. Furthermore, the glucose sensors reveal good stability and repeatability.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2016
·Vol. 34
·期 4
·475-482
·
IF 1.811
Wang Wei-cai,Shi Kai,Pan Yan-xiong,Peng Chao,Zhao Zi-liang,Liu Wei,Liu Yong-gang,Ji Xiang-ling
In this work, monodisperse giant polymersomes are fabricated by dewetting of water-in-oil-in-water double emulsion droplets which are assembled by amphiphilic block copolymer molecules in a microfluidic device. The dewetting process can be tuned by solvation between solvent and amphiphilic block copolymer to get polymersomes with controllable morphology. Good solvent (chloroform and toluene) hinders dewetting process of double emulsion droplets and gets acornlike polymersomes or patched polymersomes. On the other hand, poor solvent (hexane) accelerates the dewetting process and achieves complete separation of inner water phase from oil phase to form complete bilayer polymersomes. In addition, twin polymersomes with bilayer membrane structure are formed by this facile method. The formation mechanism for different polymersomes is discussed in detail.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2016
·Vol. 183
·期 9
·2491-2500
·
IF 4.831
Wang Bin,Chen Yanfen,Wu Yuanya,Weng Bo,Liu Yingshuai,Li Chang Ming
Nitrogen- and iron-containing carbon dots (N,Fe-CDs) are synthesized by hydrothermal treatment of branched polyethylenimine (BPEI) and hemin at 180 °C. The N,Fe-CDs are mainly doped with nitrogen and trace amounts of iron(III). The N,Fe-CDs also display intrinsic fluorescence with excitation/emission maxima at 365/452 nm and a quantum yield of 27 %. The nanodots are shown to act as peroxidase mimics by catalyzing the oxidation of tetramethylbenzidine (TMB) by hydrogen peroxide to form a blue product whose quantity can be determined by photometry at 652 nm. This was exploited to design colorimetric and fluorometric assays for dopamine (DA). The colorimetric assay is based on the oxidation of DA by H 2 O 2 in presence of the N,Fe-CDs and TMB. It has an instrumental detection limit of 40 nM (at an S/N ratio of 3), and a visual detection limit of 0.4 μM. The fluorometric assay is based on an inner filter effect that is caused by the formation of oxidized TMB which overlaps (and absorbs) the emission of the N,Fe-CDs located at 452 nm. The fluorometric detection limit is as low as 20 nM (at an S/N ratio of 3).
Carbon dots containing nitrogen and iron (N,Fe-CDs) were synthesized by hydrothermal treatment of branched polyethylenimine and hemin. The N,Fe-CDs display excellent fluorescent properties, peroxidase-like activity and potential application in colorimetric and fluorometric detection of dopamine.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2016
·Vol. 18
·期 6
·1-10
·
IF 2.101
Liang Qingshuang
In this work, we show that compositionally controlled Cu 2 (Sn 1–x Ge x )S 3 nanocrystals can be successfully synthesized by the hot-injection method through careful tuning the Ge/(Sn+Ge) precursor ratio. The band gaps of the resultant nanocrystals are demonstrated to be linearly tuned from 1.45 to 2.33 eV by adjusting the composition parameter x of the Ge/(Sn+Ge) ratio from 0.0 to 1.0. The crystalline structures of the resultant NCs have been studied by the X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), select area electron diffraction (SAED), and Raman spectroscopy. A ligand exchange procedure is further performed to replace the native ligands on the surface of the NCs with sulfur ions. The photoresponsive behavior indicates the potential use of as-prepared Cu 2 (Sn 1–x Ge x )S 3 nanocrystals in solar energy conversion systems. The synthesis of compositionally controlled Cu 2 (Sn 1–x Ge x )S 3 nanocrystals reported herein provides a way for probing the effect of Ge inclusion in the Cu-Sn-S system thin films.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2016
·Vol. 42
·期 12
·8305-8319
·
IF 1.833
Nie Guangxia,Tong Xinli,Zhang Yangyang,Liang Mao,Zhuang Xuli,Xue Song
Abstract The efficient production of 5-hydroxymethyl furfural (HMF) from carbohydrates is achieved in the presence of polyaniline-based solid catalysts. The composite polyaniline–graphite oxide (PANI–GO) is prepared from in situ polymerization of aniline in the solution of colloidal GO which was obtained from oxidation of graphite with Hummers’ method. Moreover, the SO
2 4
/PANI and SO
2− 4
/PANI–GO materials were synthesized from the sulfation of PANI and PANI–GO by a 70 % sulfuric acid solution. All obtained samples are respectively characterized with XRD, TG, FTIR, SEM and TEM techniques to reveal the physical properties and structures of these materials. When these materials were used in the dehydration of d -fructose, it was found that the PANI–GO and SO
2− 4
/PANI–GO as the catalyst exhibited prominent activities in which 80.7 and 72.4 % yields of HMF were obtained in N -methylpyrrolidone solvent at 160 °C for 4 h. In addition, the effects of reaction temperature, time, solvents and the recycling of PANI–GO material were also investigated. The material provides a promising method for the catalytic conversion of other biomass feedstocks. Graphical Abstract
Metal-free and efficient conversion of different carbohydrates to 5-hydroxymethyl furfural (HMF) with a novel PANI–GO catalyst has been successfully performed.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
·
2016
·Vol. 80
·期 1
·239-248
·
IF 1.473
Cui Yuheng,Kang Xin,Zhang Jie,Zhang Liqun,Yue Dongmei
Abstract Thermoreversible gels were obtained from the well-defined triblock terpolymer poly(n-hexyl isocyanate)-b-polybutadiene-b-poly(n-hexyl isocyanate) (PHIC-b-PB-b-PHIC). PHIC-b-PB-b-PHIC adopted a helical conformation and exhibited florescence in solution. The gels were prepared in both n-heptane and n-octane. The gelation concentration and temperature could be affected by various factors. Hydrogen bonding and intermolecular aggregation were the driving forces to form stable thermoreversible gels. Atomic force microscopy (AFM) showed that the microstructure of the gels consisted of aggregates of fibrous nanoribbons. Because of their thermosensitivity and fluorescence, the thermoreversible gels have potential applications in sensors and temperature-sensitive switches. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
Nano Research
·
2016
·Vol. 9
·期 8
·2487-2497
·
IF 8.893
Shi Yu-e,Wang Wenshou,Zhan Jinhua
The sensitive and on-site detection of inorganic explosives has raised serious concerns regarding public safety. However, high stability and non-volatility features currently limit their rapid on-site detection. Surface-enhanced Raman spectroscopy (SERS) is emerging as a powerful technique for the trace-level detection of different molecules. Plasmonic Ag nanowires were produced by a hydrothermal synthesis method using polyvinylpyrrolidone (PVP) as a negatively charged stabilizer. Here, we report a rapid detection method for inorganic explosives based on a simple surface swab with a positively charged diethyldithiocarbamate-modified Ag nanowire membrane coupled with SERS. This membrane, serving as an excellent SERS substrate with high uniformity, stability, and reusability, can capture both typical oxidizers in inorganic explosives and organic nitro-explosives, via electrostatic interaction. The detection level of perchlorates (ClO 4
− ), chlorates (ClO 3
− ), nitrates (NO 3
− ), picric acid, and 2,4-dinitrophenol is as high as 2.0, 1.7, 0.1, 45.8, and 36.6 ng, respectively. In addition, simulated typical inorganic explosives such as black powders, firecrackers, and match heads could also be detected. We believe that this membrane represents an attractive alternative for rapid on-site detection of inorganic explosives with high efficiency.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
·
2016
·Vol. 310
·期 3
·1001-1011
·
IF 0.983
Xiao Jiang,Jing Yan,Yao Ying,Xie Shaolei,Wang Xingquan,Shi Chenglong,Jia Yongzhong
Herein, the amine-functionalized MCM-41 mesoporous silica (denoted as MCM-41-NH 2 ) was synthesized and applied to adsorption and recovery U(VI) ions from aqueous solutions. The results showed that the sorption of U(VI) on MCM-41-NH 2 was strongly dependent on pH and ionic strength. The sorption was mainly dominated by outer-sphere surface complexation and the sorption equilibrium can be reached within 60 min. The maximum sorption capacity of MCM-41-NH 2 for U(VI) was calculated to be 386.98 mg g −1 at pH 5.60, much higher than that of the other reported materials.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2016
·Vol. 23
·期 17
·17822-17830
·
IF 2.76
Zhang Qian,Xia Yu-Feng,Hong Jun-Ming
As widely used disinfectants, the pollution caused by benzalkonium chloride (BAC) has attracted a lot of attention in recent years. Since it is not suitable for biodegradation, BAC was degraded firstly by Fenton advanced oxidation technologies (AOTs) in this research to enhance the biodegradability of the pollutions. The result revealed that the optimal molar ratio of H 2 O 2 /Fe 2+ for BAC degradation was 10:1, and the COD removal rate was 32 %. To clarify the pathway of degradation, the technique of GC-MS was implemented herein to identify intermediates and the toxicity of those BAC intermediates were also novelty tested through microbial fuel cells (MFC). The findings indicated that ten transformation products including benzyl dimethyl amine and dodecane were formed during the H 2 O 2 /Fe 2+ processes, which means the degradation pathway of BAC was initiated both on the hydrophobic (alkyl chain) and hydrophilic (benzyl and ammonium moiety) region of the surfactant. The toxicity of BAC before and after treated by Fenton process was monitored through MFC system. The electricity generation was improved 337 % after BAC was treated by H 2 O 2 /Fe 2+ oxidation processes which indicated that the toxicity of those intermediates were much lower than BAC. The mechanism and toxicity research in this paper could provide the in-depth understanding to the pathway of BAC degradation and proved the possibility of AOTs for the pretreatment of a biodegradation process.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2016
·Vol. 183
·期 3
·1235-1241
·
IF 4.831
Lin Peipei,Chai Fenglian,Zhang Ruiqiao,Xu Guiyun,Fan Xiaojian,Luo Xiliang
The work describes the synthesis of a nanocomposite consisting of poly(3,4-ethylenedioxythiophene) (PEDOT) doped with gold nanoparticles (AuNPs) by electropolymerization of EDOT in a solution containing colloidal AuNPs. The nanocomposite possesses good conductivity and a 3D microporous network structure owing to the presence of AuNPs. These act as both conductive dopant and template for the growth of the microporous polymer. A glassy carbon electrode modified with the nanocomposite exhibits excellent electrocatalytic activity towards oxidation of nitrite. Best operated at a voltage of 0.8 V (vs. Ag/AgCl), it is capable of detecting nitrite in the 0.2 to 1400 μM concentration range, with a detection limit of 60 nM.
A highly sensitive and selective electrochemical sensor for nitrite was developed based on the electrodeposited nanocomposite of conducting polymer poly(3,4-ethylenedioxythiophene) doped with gold nanoparticles.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2016
·Vol. 23
·期 2
·1-8
·
IF 1.969
Chang Ruixue,Qin Jianglei,Wang Haijun
A series of polymer brushes with degradable poly(caprolactone) (PCL) backbones were synthesized via “grafting onto” approach by combination of the ring-opening polymerization (ROP) and “click” reaction. First, P(αClCL) was synthesized by ROP and then the chloride was substituted by azide group to obtain P(N 3 CL) backbone; then polymer brushes were synthesized by “click” reaction of alkynyl-PCL (ay-PCL) and alkynyl-PEO (ay-PEO) onto P(N 3 CL). The products were characterized by gel permeation chromatography (GPC), FT-IR and 1 H NMR. Results indicated that the ay-PCL can be grafted onto P(N 3 CL) backbone quantitatively at 1 : 1 ratio of alkynyl group to azide group and the branch was attached onto each repeating unit because of lower steric resistance and graft density. Also the amphiphilic polymer brushes with various hetero-branches of PEO/PCL ratios were synthesized by one-pot two-step process. The amphiphilic polymer brushes self-assembled into micelles with various PEO/PCL ratios and have potential application in drug loading and delivery.
✓ 已验证
产品关联
DOI
高影响因子