ELECTROCHIMICA ACTA
·
2021
·
IF 6.901
Fuyang Jiang,Yi Sun,Kuanxin Zhang,Yongchao Liu,Xuyong Feng,Hongfa Xiang
SiO x is considered to be a promising anode material for lithium-ion batteries (LIBs) due to the high lithium storage capacity. However, the large initial irreversible capacity loss and intensive volume change during cycling hinder its commercial applications. Prelithiation is an effective and convenient strategy to improve the initial Coulombic efficiency (ICE) of SiO x , while incomplete and unstable SEI on the prelithiated anode still results in rapid capacity decay. Herein, through the synergy effect of chemical pre-lithiation process and fluoroethylene carbonate reduction, a compact and stable LiF-rich SEI layer is in-situ formed on the surface of prelithiated SiO x anode. The modified SiO x anode exhibits a high ICE of 90.7% with good cycling performance. When paired with the commercial LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) cathode, the assemble pre-Li-SiO x /C||NCM622 full cell exhibit a high ICE of 85.7% and stable cycling stability. This work provides a new insight in constructing favorable SEI in pre-lithiation process.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Xinyue Liu,Hongwei Zhao,Shan Jiang,Shuai Wu,Tong Zhao,Lixiang Li,Xin Geng,Haiming Yang,Weimin Zhou,Chengguo Sun,Yiqing Chen,Baigang An
Both SiC and porous carbons have been widely used in the fields of catalysts, ceramics, electrode materials and electromagnetic materials since their advantages of excellent chemical and thermal stability, good conductivity, flexibility and stiffness. However, pore construction of SiC still faces considerable difficulty comparing to carbon materials with a large variety of pores. Herein, by developing a novel method combining the silanization of SBA-15 template, acetylene CVD and magnesiothermic reduction reaction (MRR) technology, a novel porous material of OM-SiC@OMC that the ordered mesoporous SiC interfaces with the ordered mesoporous carbon has been successful synthesized. The silanization enhances the activity of carbon deposition into the pores of SBA-15 template, MRR results in the formation of SiC between the interface of SiO 2 and carbon. After the template removal, a novel mesoporous composite material of OM-SiC@OMC has been successfully obtained. Interestingly, OM-SiC@OMC contains two types of ordered mesopores interfacing with each other by the pore wall of SiC phase and carbon phase, respectively. As electrode materials of supercapacitors , OM-SiC@OMC exhibits a capacitance of 194.8 F g −1 with an excellent retention rate of 97.8% after 10,000 cycles. The present study explores a novel ordered porous materials constructed by the interfaced pores of carbon and carbide , it is promising to find good applications of these multi-interfaced porous materials.
✓ 已验证
产品关联
DOI
高影响因子
NANOTECHNOLOGY
·
2021
·Vol. 32
·期 30
·305402
·
IF 3.874
Yaqi Cui,Jiaoxing Xu,Yi Zhao,Lunhui Guan
The utilization of earth abundant iron and nitrogen doped carbon as a precious-metal-free electrocatalyst for oxygen reduction reaction (ORR) significantly depends on the rational design and construction of desired Fe−Nx moieties on carbon substrates, which however remains an enormous challenge. Herein a typical nanoporous nitrogen-rich single atom Fe−N/C electrocatalyst on carbon nanotube (NR-CNT@FeN-PC) was successfully prepared by using CNT as carbon substrate, polyaniline (PANI) and dicyandiamine (DCD) as binary nitrogen sources and silica-confinement-assisted pyrolysis, which not only facilitate rich N-doping for the inhibition of the Fe agglomeration and the formation of single atom Fe−Nx sites in carbon matrix, but also generate more micropores for enlarging BET specific surface area (up to 1500 m2·g−1). Benefiting from the advanced composition, nanoporous structure and surface hydrophilicity to guarantee the sufficient accessible active sites for ORR, the NR-CNT@FeN-PC catalyst under optimized conditions delivers prominent ORR performance with a half-wave potential (0.88 V versus RHE) surpass commercial Pt/C catalyst by 20 mV in alkaline electrolyte. When assembled in a home-made Zn−air battery device as cathodic catalyst, it achieved a maximum output power density of 246 mW·cm−2 and a specific capacity of 719 mA·h·g−1Zn outperformed commercial Pt/C catalyst, holding encouraging promise for the application in metal-air batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2021
·
IF 9.229
Xiaoqing Ma,Kang-lai Tang,Kang Lu,Chenke Zhang,Wenbing Shi,Wenxi Zhao
Designing metal sulfides with unique configurations and exploring their electrochemical activities for hydrogen peroxide (H2O2) and hydrazine (N2H4) is challenging and desirable for various fields. Herein, hollow microflower-like CuS@C hybrids were successfully assembled and further exploited as a versatile electrochemical sensing platform for H2O2 reduction and N2H4 oxidation, of which the elaborate strategies make the perfect formation of hollow architecture, providing considerable electrocatalytic sites and fast charge transfer rate, while the appropriate introduction polydopamine-derived carbon skeleton facilitates the electronic conductivity and boosts structural robustness, thus generating wide linear range (0.05–14 and 0.01–10 mM), low detection limit (0.22 μM and 0.07 μM), and a rather low overpotential (−0.15 and −0.05 V) toward H2O2 and N2H4, as well as good selectivity, excellent reproducibility, and admirable long-term stability. It should be highlighted that the operating potentials can compare favorably with those of some reported H2O2 and N2H4 sensors based on noble metals. In addition, good recoveries and acceptable relative standard deviations (RSDs) attained in serum and water samples fully verify the accuracy and anti-interference capability of our proposed sensor systems. These results not only elucidate an effective structural nanoengineering strategy for electroanalytical science but also advance the rational utilization of H2O2 and N2H4 in practicability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Liyuan Duan,Guoqiang Li,Shuting Zhang,Hongyu Wang,Yongle Zhao,Yongfa Zhang
In this study, graphitized carbon nitride photocatalysts were successfully prepared by using the desulfurized waste liquid extracting salt from coking plants. The NO x removal efficiency of g-C 3 N 4 synthesized using ammonium thiocyanate (NH 4 SCN), ammonium thiosulfate ((NH 4 ) 2 S 2 O 3 ) and ammonium sulfate ((NH 4 ) 2 SO 4 ) with different mass ratios were evaluated. The results showed that due to the addition of (NH 4 ) 2 S 2 O 3 and (NH 4 ) 2 SO 4 a large amount of sulfur-containing gas was released during pyrolysis, which significantly increased the specific surface area and pore volume of the photocatalysts. The release of sulfur-containing gas also resulted in the incorporation of sulfur, and due to this doping process the band gap of the photocatalyst was widened to 2.94 eV, thus enhancing its visible light response. C vacancies were formed in the hepazine ring, which increased the electron density around the N–(C) 3 bridge bond and formed an electron trapping center, thus inhibiting the recombination of charge carriers. The photocatalysts had increased O 2 adsorption capacity and increased number of amino groups on their surface. This facilitated the rapid generation and consumption of reactive oxygen species, inhibited the accumulation of NO 2 on the surface, reduced the production of NO 2 , thus improving the NO x removal efficiency of the photocatalysts. The principle of using “waste for waste control” was achieved, and a new method for nitrogen oxide removal was provided.
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Energy
·
2020
·
IF 5.604
Kuofeng Xu,Huayuan Bao,Chaoyun Tang,Kristina Maliutina,Fengjiao Li,Liangdong Fan
The development of non-platinum electrocatalysts for the quick oxygen reduction reaction (ORR) is highly desirable in electrochemical energy conversion technologies such as fuel cells and metal-air batteries. In this work, we synthesize Fe 3 O 4 /Fe–N–C-CNT (FeNC) using Fe 3+ adsorbed ZIF-8 as a chemical precursor that is obtained with a green and sustainable procedure. FeNC possesses impressive ORR activities, stability and selectivity over that of the commercial Pt/C electrocatalyst in alkaline media, and demonstrates a better peak power density of 118.05 mW cm −2 over that with Pt/C cathode and quicker reaction kinetics when integrated as air electrode catalyst into a primary zinc-air battery. In-depth investigation confirms that the presence of Fe 3 O 4 increases the wettability of carbon-based composite that promotes the adsorption of the dissolved O 2 in the electrolyte solution and extends the triple-phase boundary for ORR, and also protect the active site of Fe–N–C from poisoning. This work sheds light on a sustainable method to synthesize highly efficient non-precious metal-based electrocatalyst from metal-organic-framework precursors and understanding the reaction mechanism of the ORR process for efficient chemical energy to electricity conversion.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Zhiyan Huang,Pingxiao Wu,Chenhui Liu,Meiqing Chen,Shanshan Yang,Zhi Dang,Nengwu Zhu
Understanding the origin of high activity of graphene layers encapsulated Fe-N-C catalysts in Fenton-like reaction is critical, but still challenging for developing catalysts with high activity and durability. Therefore, we prepared a highly active Fe-N-C catalyst (Fe x Mn y -Fe@NCs) containing FeN 4 coordination to activate peroxymonosulfate (PMS) toward 4-aminobenzoic acid ethyl ester (ABEE) degradation, and revealed the multiple catalytic reaction sites by investigating the composition and the structure of the catalyst. The relationship between the catalytic degradation performance and multiple catalytic reaction sites was performed on the basis of both experiments and density functional theory (DFT) calculations. The catalytic performance of Fe 2 Mn 1 -Fe@NCs was found to show optimal catalytic degradation performance. Pyrrolic N served as adsorption site as well as singlet oxygen generation site to promote the catalytic degradation. Fe-pyridinic N-C acted as hydroxyl radical and sulfate radical generation site. Both singlet oxygen and superoxide radical were dominated the catalytic reaction. The insight achieved from this study may be further applied to other Fe-N-C catalysts design and further efficient organic pollution remediation.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2020
·
IF 5.339
Dandan Song,Jing Zheng,Nosang V. Myung,Jingli Xu,Min Zhang
A sandwich-type electrochemical immunosensor was developed for the detection of CEA where hollow magnetic silica coated nickel/carbon (Ni/ [email protected] 2 ) nanocomposites was used as an immobilized carrier and gold nanoparticle-coated PANI microsphere ( [email protected] @Au) as electrochemical transducer. Magnetic assembly of Ni/ [email protected] 2 nanocomposites allow easy separation and assembly which eliminates the further modification process. In addition, the prepared [email protected] @Au possess good biocompatibility, and electrical conductivity. The fabricated immunosensor show excellent sensing performance including a wide dynamic range from 0.006 to 12.00 ng mL −1 and low detection limit at 1.56 pg mL −1 . Moreover, this sensor shows superior selectivity with excellent reliability and reproducibility which might lead into easier implementation in clinical setting.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Yi Wang,Chuangchuang Liu,Shaofeng Zhou,Rui Hou,Lihua Zhou,Fengyi Guan,Renlian Chen,Yong Yuan
Three-dimensional (3D) nano-structure materials with a large bacterial accessible specific area have emerged as promising electrode materials for bioelectrochemical systems (BESs), achieving high bioelectricity outputs. However, it remains a challenge that biofilms with increased thickness inhibit substrate diffusion into the 3D nano-structure during long-term operation of BESs, causing a reduction in bioenergy output. Herein, an innovative ordered 3D nano-structure electrode was fabricated by growing self-supported N-doped C/Fe 3 O 4 -nanotube composite arrays onto carbon fiber cloth ( [email protected] /Fe 3 O 4 ), using template-based deposition coupled with thermal reduction/carbonization methods. The fabricated [email protected] /Fe 3 O 4 electrode was applied as a bioelectrode in a conventional three-electrode BES and as an anode in microbial fuel cell (MFC), while their capacity to improve bioelectricity generation was assessed. Results indicate that the hierarchical N-doped C-coated nanotube arrays not only significantly enhanced conductivity and areal capacitance of the electrode, but also reduced its charge transfer resistance and provided the 3D open nano-structure with excellent biocompatibility for microbial colonization and internal diffusion of the culture substrate. Consequently, a high maximum current density (4.11 mA/cm 2 ) and coulombic efficiency (~89%) was obtained from the [email protected] /Fe 3 O 4 electrode after about 3 months of BES operation, exhibiting higher biocatalytic performance and extracellular electron transfer efficiency than the original carbon fiber cloth (CC, 1.89 mA/cm 2 ). Moreover, MFC equipped with [email protected] /Fe 3 O 4 anode produced a maximum power density of 1.21 ± 0.04 W/m 2 , which was 2.1 times higher than CC (0.58 ± 0.03 W/m 2 ). This study demonstrates the outstanding advantages of [email protected] /Fe 3 O 4 nanotube composite arrays assembled on CC, making it a potential alternative to existing 3D electrodes for high-performance BES applications.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2020
·Vol. 12
·期 26
·14259-14266
·
IF 6.895
Yi Guan,Nan Li,Yongliang Li,Lingna Sun,Yuan Gao,Qianling Zhang,Chuanxin He,Jianhong Liu,Xiangzhong Ren
Bottom-up construction of transition copper–nitrogen–carbon (Cu–N–C) electrocatalysts with high-performance and long-term durability for the oxygen reduction reaction (ORR) still remains a great challenge. Herein, we propose a temperature-controlled synthesis strategy with confinement effect for fabrication of a novel two-dimensional dual-metal (Cu/Zn) zeolitic imidazolate framework material, which presents an ultrathin nanosheet morphology after high-temperature thermal treatment (denoted as Cu–N-UNS). By controlling the reaction temperature as well as regulating the ratio of metal ions and taking advantages of the confinement effect of surfactants, the rationally designed ultra-thin carbon layer not only prevents aggregation of transition Cu particles and avoids direct contact with reactants and electrolyte solutions to enhance the durability of electrocatalysts, but also shortens the electronic transmission path between the active transition metal species and carbon surface. Therefore, the electrocatalyst exhibits excellent electrocatalytic performance for the ORR (E1/2 ≈ 0.898 V), which is superior to those of state-of-the-art benchmark noble-metal electrocatalysts. Moreover, the even distribution of Cu–N–C and existence of N–Cu2+–Cu0 active sites make a great contribution to the electrocatalyst activity. Notably, the Cu–N-UNS used as air electrodes for Zn–air batteries also exhibits a high peak power density of ≈134.7 mW cm−2 at a current density of ≈231.9 mA cm−2 with remarkable durability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CRYSTAL GROWTH & DESIGN
·
2020
·
IF 4.089
H. Liu,X. Yang,S. Cao,F. Yu,S. Long,J. Chen,M. Zhang,S. Parkin,T. Li,Z. Yang
A series of N-phenyl-2-hydroxynicotinanilides (PHNAs) have been synthesized, and their crystal structures have been investigated. The identity of these compounds is revealed to be the tautomer of PHNAs, i.e., 2-oxo-1,2-dihydropyridine-3-carboxylic acid phenylamides, compounds with both amide and lactam functionalities. Among these compounds, those with no or negligible steric hindrance take a near planar conformation and form lactam–lactam dimers, not the widely observed amide NH···O═C hydrogen bond chains, while those with steric hindrance take a twisted conformation and form an amide NH···O═C (lactam) hydrogen bond. A succinct theoretic study combining conformational analysis and molecular electrostatic potential surfaces (MEPS) survey provided a reasonable explanation of the formation of these two different hydrogen bond motifs.
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2020
·Vol. 13
·期 5
·1135
·
IF 3.057
Lei Zha,Heping Li,Ning Wang
TC11 alloy is a promising structural material, and has a wide range of applications in many corrosive and high temperature hydrothermal systems. The passive film has an important influence on its electrochemical behavior. In this study, in-situ electrochemical methods (that is, open circuit potential (OCP), linear polarization (LP) and electrochemical impedance spectroscopy (EIS)) were used to monitor the long period electrochemical behavior of TC11 alloy in 0.01 M Na2SO4solution at 300 °C/10 MPa. The growth kinetics of the passive film was mainly studied. The correlation between the evolution of the electrochemical behavior and the growth of the oxide film was discussed. The results showed that although the OCP gradually stabilized after twenty thousand seconds, henceforth the polarization resistance (Rp) was still increasing due to the thickening of the passive film. An equivalent circuit was proposed to fit the EIS experimental data, leading to determination of film capacitance and film resistance. Besides, the electrochemical data was interpreted in terms of the point defect model (PDM). The EIS results are consistent with theRpresults.Keywords:TC11 alloy;passive film;time;high temperature and pressure;EIS;PDM
✓ 已验证
产品关联
DOI
PubMed
高影响因子