INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2020
·
IF 3.573
Hai Jiang,Yingli Ding,Juyang Liu,Arun Alagarsamy,Li Pan,Dongpo Song,Kunyu Zhang,Yuesheng Li
A series of poly(L-lactic acid) (PLLA)-b-poly(methyl methacrylate) (PMMA) block copolymers with well-defined chemical structures were synthesized by ring-opening polymerization followed by atom-transfer radical polymerization. These copolymers were investigated as effective A-b-C-type compatibilizers for poly(lactic acid) (PLA) and renewable poly(epichlorohydrin-co-ethylene oxide) (ECO) elastomer blends. Compared to the neat binary PLA/ECO blend, the PLLA-b-PMMA copolymers significantly improved the compatibility of the PLA and ECO phases, leading to enhanced interfacial adhesion and mechanical performance. Interestingly, by tuning the chain structure and adding different amounts of the copolymer, two different phase structures were achieved in the blends: a typical sea-island morphology of the blends with a low content of PLLA-b-PMMA block copolymers (<15%) and a unique tricontinuous phase morphology with a percolated PLLA-b-PMMA copolymer zone of the blend with the addition of 20 wt % asymmetric A181M868 block copolymer. Both the morphological structures endowed the blends with excellent toughness, including a high elongation at break (>260%) and non-broken behavior with an optimum impact strength above 63 kJ/m2. Accordingly, two different toughening mechanisms were proposed for the blends with different phase structures. The PLLA-b-PMMA block copolymers provide highly efficient and versatile A-b-C-type compatibilizers to fabricate high-performance sustainable PLA-based materials for wide application prospects.
✓ 已验证
DOI
高影响因子
Nanoscale
·
2021
·Vol. 13
·期 23
·10385-10392
·
IF 7.79
Xiuping Sun,Suyuan Zeng,Ruxia Man,Lu Wang,Bo Zhang,Fang Tian,Yitai Qian,Liqiang Xu
Transition metal selenides (TMSs) are suitable for SIBs and PIBs owing to their satisfactory theoretical capacity and superior electrical conductivity. However, the large radius of Na+/K+ easily leads to sluggish kinetics and poor conductivity, which hinder the development of SIBs and PIBs. Structure design is an effective method to solve these obstacles. In this study, Co2+ ions combined with glycerol molecules to form self-assembled nanospheres at first, and then they were in situ converted into CoSe2 nanoparticles embedded in a carbon matrix during the selenization process. This structure has three-dimensional ion diffusion channels that can effectively hamper the aggregation of metal compound nanoparticles. Meanwhile, the CoSe2/C of the yolk–shell structure and a large number of pores help alleviate volume expansion and facilitate electrolyte wettability. These structural advantages of CoSe2/C endow it with remarkable electrochemical performances for full/half SIBs and full/half PIBs. The obtained CoSe2/C exhibits superior stability and excellent performance (312.1 mA h g−1 at 4 A g−1 after 1600 cycles) for SIBs. When it is used as an anode material for PIBs, 369.2 mA h g−1 can be retained after 200 cycles at 50 mA g−1 and 248.1 mA h g−1 can be retained after 200 cycles at 500 mA g−1; in addition, CoSe2/C also shows superior rate capacity (186.4 mA h g−1 at 1000 mA g−1). A series of ex situ XRD measurements were adapted to explore the possible conversion mechanism of CoSe2/C as the anode for PIBs. It is worth noting that the full-cell of CoSe2/C//Na3V2(PO4)3@rGO for SIBs and the full-cell of CoSe2/C//PTCDA-450 for PIBs were successfully assembled. The relationship between the structure and performance of CoSe2/C was investigated through density functional theory (DFT).
✓ 已验证
DOI
高影响因子
MICROCHIMICA ACTA
·
2018
·Vol. 185
·期 9
·1-8
·
IF 5.705
Wang Nan,Duan Jizhou,Shi Weijie,Zhai Xiaofan,Guan Fang,Yang Lihui,Hou Baorong
Various 3-dimensional C/CeO 2 hollow nanostructure frameworks (3D C/CeO 2 HNFs) were synthesized by using a polymer blowing process that is accelerated by adding a certain amount of cerium nitrate. Polyvinylpyrrolidone was used as the polymer. The resulting HNFs were characterized by scanning electron microscopy, energy dispersive spectrometry, X-ray diffraction, and X-ray photoelectron spectroscopy. The HNFs possess a large specific surface area, and the CeO 2 nanocrystals consist of a single phase. The HNFs display intrinsic peroxidase-like activity and can catalyze the oxidation of the peroxidase substrate 3,3′,5,5′-tetramethylbenzidine in the presence of H 2 O 2 to produce a blue product. The method was applied to the quantification of H 2 O 2 with a 5.2 nM detection limit. The analytical range is from 10 nM to 1 μM.
Schematic of the preparation of a 3-dimensional C/CeO 2 hollow nanostructure framework by a polyvinylpyrrolidone-blowing process accelerated by Ce(NO 3 ) 3 . They were applied to H 2 O 2 detection by catalyzing the oxidation of peroxidase substrate 3,3′,5,5′-tetramethylbenzidine (TMB) to the oxidized 3,3′,5,5′-tetramethylbenzidine (oxTMB) to produce blue-color reaction.
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2015
·
IF 4.642
Yong Liu,Lungang Chen,Tiejun Wang,Qi Zhang,Chenguang Wang,Jinyue Yan,Longlong Ma
Lignocellulosic biomass is a renewable feedstock that has the potential to replace the diminishing fossil fuels. Herein, we reported the simultaneous conversion of cellulose, hemicellulose and lignin from raw biomass into gasoline alkanes (hexanes and pentanes) and monophenols and related hydrocarbons over layered LiTaMoO6 and Ru/C in aqueous phosphoric acid medium. Specifically, gasoline alkanes were directly yielded from the carbohydrate components, based on hemicellulose and cellulose, and the total yield could be up to 82.4%. Notably, the lignin fraction could also be transformed into monophenols, related alcohols and hydrocarbons by the one-pot reaction. It suggested that the hydrocracking of monophenol fraction could be performed in this catalytic system. The total yield of volatile products was 53% based on the lignin fraction. In this paper, the influences of phosphoric acid concentration, substrate ash and the amino acids derived from the biogenic impurities were investigated and different raw biomass substrates were tested. Furthermore, the catalysts could be reused for several runs to convert raw biomass without pretreatment.
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2025
·
IF 4.7
Chen-Yuan Ma,Yu-Ming Pan,Pei Han,Mei-Hong Duan
Development of new birefringent crystals with enhanced properties remains an ongoing research priority. Through the exploration of guanidinium-containing oxalates with the structural modulation of Pb 2+ and Cl - , a new birefringent crystal, [C(NH 2 ) 3 ]Pb(C 2 O 4 )Cl·H 2 O (GPCCH), was successfully obtained. GPCCH was characterized by two types of π-conjugated building units, which contributes to the coexistence of a wide bandgap of 3.98 eV and a large birefringence of 0.24@546 nm. These findings highlight the synergistic role of π-conjugated building units and partially-chlorinated lead-containing units played in generating fascinating UV birefringent crystals.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Xue Yang,Pengfei Zhang,Xiaoxiao Xing,Qingyu lv,Yongqiang Jiang,Yong Jiang,Zhifei Wang
Lanthanide-doped microspheres , especially europium complexes, are widely utilized as fluorescent reporters in lateral flow immunoassays . High fluorescence signal output, which is closely associated with the synthesis of microsphere, is critical for this procedure. Here, the interior structure of microspheres was attempted to be adjusted by introducing plasticizer lauryl methacrylate (LMA) into the polymerization of styrene monomer to improve the amount of europium complexes encapsulated in microspheres. The scanning electron microscope (SEM) results showed that the microspheres containing LMA were spherical and uniform in size (the average size 291 nm). A maximal fluorescence signal was reached when the microspheres were prepared by adding 10 wt% LMA relatively to styrene, which is almost three times that of microspheres without LMA. Such elevation in fluorescence signal can be attributed to the increment in content of encapsulated europium complexes (about 47.10 mg/g, which is far higher than other reported methods (3.72 or 1.023 mg/g)) induced by reducing the regularity of the polymer chain and increasing its flexibility as well as distensibility inside microspheres with LMA. Thanks to such superior fluorescence property, lateral flow immunoassay was successfully founded to detect C-reactive protein (CRP) with a linear response in concentration range of 1.3–210.7 μg/L. Therefore, the fundamental advance in this work is to provide the way to adjust the environment inside microspheres for encapsulation of europium complexes, which lays a good foundation for preparing microsphere with high fluorescence intensity.
✓ 已验证
DOI
高影响因子
iScience
·
2022
·
IF 6.107
Shixun Liu,Anming Xu,Bin Xie,Fengxue Xin,Weiliang Dong,Jie Zhou,Min Jiang
Summary The synthesis of biofilm exopolysaccharides and rhamnolipids (RLs) are two interrelated processes in Pseudomonas aeruginosa , but how bacteria coordinate these two processes remains unclear. We collected a P. aeruginosa KT1115 with rugose small colony variant (RSCV) phenotype from soil, and used it to study the dynamic regulation mechanism of biofilm polysaccharide and RLs synthesis. The results showed that the overproduction of biofilm exopolysaccharides at biofilm stage ultimately contributed the surge of RLs production at RLs stage. This phenomenon was further verified by comparing PAO1 with its engineered RSCV mutant, PAO1Δ wspF . Further genomic, transcriptomic analyses and gene deletion revealed that downregulation of c-di-GMP level was the key to switch biofilm exopolysaccharides accumulation to RLs surge, by transcriptionally upregulating a c-di-GMP phosphodiesterase NbdA. Overall, this study demonstrates the importance of c-di-GMP in coordinating biofilm exopolysaccharides and RLs synthesis, and provides an inspiration for enhancing RLs production through regulating c-di-GMP level.
✓ 已验证
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2021
·
IF 6.707
Xiaogang Guo,Taotao Liang,Huisheng Huang,Binfang Yuan,Jing Wang
In 21st century, the microchip plays an essential role in data and information security, and preventing information leakage stored in chips becomes more challenging. This paper firstly introduced electrophoretic assembly technique and surface functionalization to design the C-doped nano-Al/Co 3 O 4 functional energetic material (nFEM) coating with triple stability of anti-wetting, micro-structure and energy-release for at least one year, and the energetic film was integrated with copper based-chip to construct the C-doped Al/Co 3 O 4 nFEM-chip to realize its self-destruction. Product shows outstanding anti-wetting properties with high water contact angle of 168 ± 1° and extremely low sliding angle of ∼ 1°, and well weather resistance in variable environments. Impressively, the output of heat (Q) of product can reach up to 3598 J/g nearly 85% of theoretical value with a relatively low activation energy of 235.46 kJ/mol, and keeps almost thermopositive stability even for immersed samples for fifty cycles after one year exposure test. In addition, C-doped Al/Co 3 O 4 nFEM-chip after immersion and exposure tests can also be effectively destroyed or ignited with a dazzling flame in an ultrashort time (<1ms), demonstrating the great advantage and huge application potentials for the design of other functional transient-chips with nano/micro-scale high-energy systems applied in different environments, even underwater.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2017
·
IF 6.216
Yijun Xue,Wei Sun,Qian Wang,Limei Cao,Ji Yang
MOFs (metal-organic frameworks) are stable materials with both organic and inorganic pores, and possess high surface area fascinating structures. Owing to the unique octahedral of aluminum center and strong Al–O bonds, Al-based MOFs show excellent thermal stability. In this paper, MIL-96(Al) is proved to be effective at dispersing Pt particles evenly and sparsely as it is employed as catalyst support. MIL-96(Al) is synthesized via a water based route and different contents of Pt particles are directly deposited on the surface of MIL-96 in one step by hydrothermal method to prepare Pt X MIL-96 (x represents Pt content) catalysts. The catalyst are sprayed evenly on carbon paper, with Pt content of 0.03%, 0.11%, 0.27% and 0.41%, respectively, and are applied in a gas diffusion reactor with snakelike flow field for low temperature H 2 -SCR. For Pt 5 MIL-96/CP, the NO removal efficiency can reach up to 100% at 60 °C. Electron transfer between Pt and MIL-96 is observed via X-ray photoelectron spectron (XPS). It reveals that the deposited Pt is in metallic state. Meanwhile, the electronic structure of MIL-96 is kept intact in the process of Pt depositing. The excellent performance of Pt 5 MIL-96/CP catalyst strongly suggests its potential application.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS CHEMISTRY
·
2011
·Vol. 21
·期 44
·17988-17997
·
IF 5.101
Yi Lu,Jiang-ping Tu,Chang-dong Gu,Xiu-li Wang,Scott X. Mao
Nickel phosphide (Ni2P) hollow spheres were facilely prepared via an organic-phase strategy using nickel(II) acetylacetonate as a metal precursor, trioctylphosphine as a phosphorus source, and octyl ether as solvent. A core/shell-structured Ni2P@C nanocomposite was grown in situ by employing oleylamine and 1-octadecene as capping agent and solvent, respectively, and the hollow Ni2P spheres were homogeneously wrapped by an amorphous carbon shell. The reversible capacity of the Ni2P@C nanocomposite after 50 cycles is 435 mAh g−1 at 0.1 C and 303 mAh g−1 at 0.5 C, respectively, much higher than that of Ni2P (184.2 mAh g−1 at 0.1 C and 123 mAh g−1 at 0.5 C). These improvements are attributed to the carbon shell, which can enhance the conductivity of Ni2P, suppress the aggregation of active particles, and increase their structure stability during cycling.
✓ 已验证
DOI
高影响因子
CHEMICAL GEOLOGY
·
2024
·
IF 3.6
Kuan Cheng,Yunlu Yin,Ying Wang,Guoyong Huang,Dandan Pan,Milan Wang,Xuxin Song,Tongxu Liu,Xiaomin Li
Microbial Fe(II) oxidation is mainly mediated by the outer-membrane proteins that contain c -type cytochromes ( c- Cyts), and the widespread Fe(II)-oxidizing bacteria are usually subjected to fluctuations between oxic and anoxic conditions. However, it remains unclear how oxygen affects the redox dynamics of c- Cyts by Fe(II), particularly in the presence of organic ligands that are widely distributed in the environment. Here, the reduction of a model heme-containing c- Cyts by Fe(II) was investigated in the absence and presence of organic ligands (i.e., citrate and acetate) at pH 5.5 under anoxic and oxic conditions . The kinetic results showed that c- Cyts reduction was enhanced by citrate and acetate under anoxic conditions, and the enhancement by citrate was more pronounced than that by acetate. The speciation calculation and cyclic voltammetry results suggested that the proportions of Fe(II)-Citrate complexes were much higher than those of Fe(II)-Acetate complex, but the addition of acetate and citrate caused minor changes in redox potential of Fe(II)/Fe(III) species. Further analysis using quantum chemical computation demonstrated that the formation of Fe(II)-Heme complexes via lateral binding to the carboxyl group of c- Cyts was more stable than those via replacing the S-linked axial ligand of heme, with the recombination energy with Heme ranking as Fe(II)-Citrate < Fe(II)-Acetate < Fe(II). Therefore, the stronger complexation of Fe(II)-Citrate and its lower recombination energy with c- Cyts drive the enhanced c- Cyts reduction under anoxic conditions. By contrast, the c- Cyts reduction by Fe(II) and Fe(II)-ligand was inhibited under oxic conditions. The electron spin resonance characterization indicated that both O 2 − • and OH• radicals were produced in the system of c- Cyts with Fe(II) or Fe(II)-ligand under oxic conditions and the signals were higher with Fe(II)-ligand than those with Fe(II). These reactive oxygen species were proposed to enable a re-oxidation of the c- Cyts that was reduced by Fe(II) or Fe(II)-ligand, causing an inhibitory effect on the observed c- Cyts reduction and forming more reactive oxygen species . Our findings shed light on the important roles of Fe(II)-ligand-heme complexation and reactive oxygen species in the interaction between Fe(II) and c- Cyts, which deepen the understanding of microbial/enzymatic Fe(II) oxidation under oxic conditions at the molecular level.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Nano Materials
·
2025
·
IF 5.5
Yiqun Su,Mian Gong,Yipeng Liu,Faiz Ullah Shah,Aatto Laaksonen,Rong An
Titanium dioxide (TiO2) nanostructures exhibit exceptional flexibility for integration into surface-enhanced Raman spectroscopy (SERS) sensing platforms enabling nanoscale trace detection of biomolecules with high sensitivity. However, fabricating TiO2 nanomaterials for large-scale SERS applications remains challenging due to the high cost and complexity of synthesis methods. In this study, we demonstrate a cost-effective and scalable approach using commercial TiO2 P25 nanoparticles as the SERS substrates, functionalized with a phosphonium-based fluorine-free ionic liquid (IL) comprising the trihexyl(tetradecyl)phosphonium cation ([P6,6,6,14]+) with four long alkyl chains and the 2–2-(2-methoxyethoxy)ethoxy anion ([MEEA]−). This IL serves as a nanoscale “linker”, effectively bridging Cytochrome c (Cyt c) molecules with TiO2 nanoparticles, significantly enhancing the Cyt c–TiO2 interactions and SERS signal intensity. The optimized system achieves remarkable sensitivity, enabling the detection of Cyt c concentrations as low as 5 × 10–4 M, with an enhancement factor increased by 1 order of magnitude compared to the control system. This work stresses the importance of nanoscale interactions and offers an alternative straightforward strategy for trace protein detection using commercially available TiO2 P25 nanoparticles, thus circumventing the need for complex nanomaterial fabrication methods.
✓ 已验证
产品关联
DOI
高影响因子