JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Wangwu Li,Jiao Peng,Hui Li,Zhenyu Wu,Baobao Chang,Xiaowei Guo,Gairong Chen,Xianyou Wang
Si-based anodes have revealed the potential as the next generation of lithium ion battery anode material , whereas the poor conductivity and huge volume changes during (de)lithiation process of silicon still limit their practical application. Herein, the Si/nitrogen doped carbon layer/carbon framework microspheres (SCM) are designed by nano-Si via electro-spray technology as anodes for lithium ion batteries. It has been found that the SCM consists of individual carbon-coated nano-Si primary particles linked by PAN framework, in which the carbon buffer layer can further absorb the stress of volume changes during charge/discharge process, and the carbon framework carbon framework not only provides fast diffusion path of electron, but also effectively reduces the consumption of electrolyte. Therefore, the initial columbic efficiency (ICE) of SCM anode can reach as high as 72%, and the SCM anode also shows a high specific capacity of 1192 mAh g −1 at 0.2 A g −1 and keeps a reversible capacity of 746 mAh g −1 after 200 cycles, demonstrating the as-designed SCM possesses an high ICE and a good electrochemical performance. This strategy provides a significant inspiration for fabricating high-performance Si/C anode materials of lithium-ion battery.
研究领域:
材料科学
·
储能
·
电化学
·
纳米技术
✓ 已验证
DOI
高影响因子
JOURNAL OF THE INDIAN CHEMICAL SOCIETY
·
2026
·Vol. 103
·期 5
·102557
·
IF 3.4
Lei Liu,Fang Liu,Xinqian Ma,Jingyue Qian,Qiangshun Wu,Lina Wang,Liqiang Cui
Iron-based metal organic frameworks (Fe-MOFs) have been regarded as the ideal precursors for synthesis of iron-carbon micro-electrolysis (IC-ME) materials. However, their conventional autoclave-based fabrication limits large-scale application, and the potential of the resulting Fe@C composites derived from Fe-MOFs for Cr(VI) reduction remains underexplored. Herein, a facile stirring method conducted under ambient conditions was successfully developed. The evolution from Fe-MOFs to Fe@C was comprehensively characterized, and its reductive capacity for Cr(VI) was systematically evaluated. The effect of key experimental parameters including reaction time, initial pH value, electrolyte concentration, catalyst dosage, and environmental matrices on Cr(Ⅵ) removal were investigated in detail on the basis of the concentration variation of Fe ions released into water. The obtained results indicated that the rate of Cr(VI) removal-efficiency change (Δη/Δt) was positively corelated with that of Fe(II) concentration change (Δ C Fe(II) /Δ t) and 98.2% of Cr(VI) was removed within 60 min under the optimized conditions. According to the results of XPS with ion sputtering, Cr(VI) was removed via multiple pathways including adsorption, reduction and co-precipitation. This work not only offers a scalable route for MOFs-derived IC-ME materials, but also provides mechanistic insights into Cr(VI) removal from the perspective of Fe(II) dynamics.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2026
·
IF 14
Aiyue Sun,Ying Zhang,Zhenhua Gu,Guoliang Li,Yi Zhang,Ze Zong,Yali Liu,Xin Li,Muhammad Shahzad,Ming Li
To address the low thermal conductivity, severe supercooling, and poor long-term cycling stability of water-based phase change materials (PCMs), functional additives are commonly introduced. However, latent heat loss is inevitably induced by the disruption of the hydrogen-bonding network of water molecules. Herein, we propose an interface electronic-structure engineering strategy to regulate phase transition behavior by constructing electronically active heterointerfaces with a stable built-in electric field. The TiN/C heterostructure derived from MXene/cellulose aerogels is designed, in which TiN nanocrystals are in situ anchored within a porous carbon framework, forming robust TiN–C covalent interfaces. The resulting built-in electric field enhances water molecule polarization and interfacial chemical adsorption, stabilizes the hydrogen-bond network during repeated phase transitions, and promotes molecular and ionic migration. The optimized TiN/C-3 PCM exhibits a latent heat of 268.83 J g -1 with an ultralow additive loading of 7.1wt%, corresponding to a latent heat retention of 97.92%, and maintains 97.7% of its initial performance after 100 cycles. Cold-chain simulations further demonstrate stable temperature control at 0–4 °C for over 7 h, highlighting its potential for sustainable cold-chain applications. This work provides an effective strategy for designing high-performance PCMs, demonstrating the enormous potential of sustainable cold chain logistics.
✓ 已验证
产品关联
DOI
高影响因子
ENERGY
·
2026
·
IF 10.1
Zhiwen Wang,Yi Li,Linwen Wang,Chunhong Chen,Qing Zhou,Dongxia Yan,Junli Xu,Jiayu Xin,Xingmei Lu
A novel Polyethylene terephthalate (PET) steam pyrolysis method is developed by introducing high H/C ratio gas to produce terephthalic acid (TPA) monomer. CH 4 , C 2 H 6 , C 2 H 4 , C 3 H 8 , and C 3 H 6 were used as external hydrogen donors to upgrade the waste PET steam pyrolysis process, which were proven to be effective. Under optimized conditions (H 2 O flow rate of 0.1 mL/min, C 3 H 8 flow rate of 2 mL/min, heating rate of 0.5 °C/min, and final pyrolysis temperature of 450 °C), the H 2 O/C 3 H 8 /N 2 system achieved a product yield increase from 32.69% to 93.15% and a TPA purity improvement from 26.57% to 90.73%, with complete elimination of coke residues. Isotope tracing experiments using D 2 O confirmed the dual roles of H 2 O in hydroxyl substitution and hydrogen transfer, with C 3 H 8 compensating for hydrogen deficiency from H 2 O and enhancing the hydrogen transfer pathway. Through DFT calculations, the pathways and mechanisms of PET steam pyrolysis using C 3 H 8 as an external hydrogen donor were proposed, demonstrating that H 2 O and C 3 H 8 synergistically mediate the oriented pyrolysis of PET toward TPA by supplying ·OH and ·H radicals. This method offers a new idea for directional pyrolysis to prepare monomers, which is of great significance for achieving the recycling of waste plastics.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Wenxuan Lu,Simin Wang,Yuxuan Xu,Xiaoxia Wang,Xijun Wang,Kun Zhao,Yunfei Gao,Fuchen Wang
The integration of an intermetallic Pt alloy and single-atom M–N–C support is an intriguing strategy to combine the advantages of both counterparts and further lower Pt usage at higher power output. Despite prior attempts, the fuel cell performance is still unsatisfactory, and the atomic diffusion/alloying pathway between the Pt alloy and M–N–C is still not clear. Here, we control the Co amount in the CoNC and present the atomic-diffusion pathway for the in situ formation of Pt-based intermetallic catalysts with size-controlled nanoparticles (NPs). The synthesized Pt3Fe–Co@5CoNC demonstrates excellent performance in half-cell ORR tests. Under H2–air conditions, the membrane electrode assembly exhibits low Pt usage (0.175 g kW–1), good stability with a 12.5 mV loss at 0.8 A cm–2 at the end of the test, and an ultrahigh power density of 1.717 W cm–2 at 0.429 V. Comprehensive experimental results and DFT calculations show the atomic pathway of diffusion and alloying for low-coordinated Co–N3–C into L12-Pt3Fe NPs. In comparison, high-coordinated Co–N4–C remains stable and contributes to the stability of the intermetallic Pt alloy through the strong Pt–Co–N4 interaction. This work demonstrates important progress in the integration of intermetallic Pt alloy and single-atom CoNC for ORR and can be extended to other single-atom supports, including Ni-NC, Fe-NC, and Cu-NC.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER
·
2026
·
IF 5.1
Xue Lin,Xiao Song,Yanan Yin,Xiaobing Ren,Xu Gao,Minghui Wang,Zhao Jin,Mingda Wen
1.Functional components were incorporated into polystyrene microspheres under surfactant-free conditions, simultaneously improving their monodispersity, optical stability, and functional reliability. • 2.The developed LICA-based CRP detection method exhibited good analytical performance, with stability bias ranging from -3.5% to 0.6%, relative bias for accuracy ranging from -1.0% to 0.7%, within-batch coefficients of variation ranging from 4.20% to 4.70%, and between-batch relative deviations ranging from -6.46% to 4.45%. • 3.Compared with the conventional Immunoassay Technology (IT) method, the LICA method showed good agreement, with 90% of measurements falling within the limits of agreement. C-reactive protein (CRP) is an important biomarker for diagnosing and therapeutic-monitoring inflammatory and cardiovascular diseases. Although the light-initiated chemiluminescent assay (LICA) enables rapid, highly sensitive homogeneous detection, its widespread applications are constrained by the stringent performance requirements for donor and acceptor microspheres. In this study, covalently integrated donor and acceptor microspheres were fabricated through a soap-free emulsion copolymerization strategy by incorporating 2-vinylthiophene, europium complexes, and a photosensitizer into a polystyrene matrix. Subsequently, oxidized dextran surface modification was introduced into the matrix to enhance biocompatibility and biomolecular conjugation efficiency. Thus obtained microspheres exhibited excellent mono-dispersity, high optical stability, and favorable surface characteristics for homogeneous immunoassays. The developed LICA-based CRP assay demonstrated satisfactory analytical performance, with a relative bias ranging from -1.0% to 0.7% for high-concentration samples and from -1.0% to 0.6% for low-concentration samples. The within-run precision showed a coefficient of variation ranging from 4.20% to 4.70%, with between-batch relative bias ranging from 4.45% to 6.46%, all of which satisfied a predefined acceptance criteria of < 8%. Compared with conventional immunoassay technology, the developed assay yielded a mean bias of -1.47 ng/mL, with 90% of measurements falling within the limits of agreement (-6.15 to 4.18 ng/mL), which demonstrates good consistency between the two assays. The developed microspheres provide a reliable material platform for homogeneous LICA and offer a promising potential for clinical applications of CRP detection. Download: Download high-res image (421KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF STRUCTURAL CHEMISTRY
·
2026
·
IF 10.5
Xingyu Li,Jian Peng,Zihao Xu,Wanyuan Li,Biao Xu,Chunyu Li,Wubin Dai
Simultaneous realizations of high thermal stability and quantum efficiency (QE) in phosphors with near-infrared (NIR) photoluminescence (PL) and long-persistent PL (LPL) attributes are a daunting task. Herein, we have come up with a dual-site co-substitution scheme in Ca 3 Sc 2 Ge 3 O 12 : Cr 3+ /Ni 2+ to concurrently actualize high-quality NIR-I/II (L)PL via either equivalent or aliovalent co-substitution at indirect lattice A/C sites of [Y 3+ + Al 3+ ] or [Y 3+ + Si 4+ ] for [Ca 2+ + Ge 4+ ]. Both Cr 3+ and Ni 2+ are colonized at B site (Sc 3+ ) under weak crystal field environment and emitting continuous PL across NIR-I/II regions via energy transfer from Cr 3+ to Ni 2+ under blue-light excitation. Due to inequivalent replacement of Ni 2+ at Sc 3+ site and consequential production of defects, a charming NIR LPL is also gained. Further incorporation of [Y 3+ + Al 3+ ] unit begets densified robust framework with [Sc(Cr/Ni)O 6 ] octahedral distortion, elucidating the mechanism of improved properties in PL QE (76.23%) and stability (89.5%@423 K). While [Y 3+ + Si 4+ ] modulation in Ca 3 Sc 2 Ge 3 O 12 not only brings rigid structure but also suppresses defects (LPL) because of equivalent triple-unit between Y 3+ /Si 4+ /Ni 2+ and Ca 2+ /Ge 4+ /Sc 3+ . A NIR pc-LED based on the designed phosphor with a commercial 460 nm blue LED chip is fabricated and reveals multi-applications in nondestructive detection, bioimaging, and anticounterfeiting. This work provides new perspectives for developing high-performance NIR-emitting phosphor materials. This study reveals the state-of-the-art researches on both NIR-I/II-emitting (L)PL phosphors with high QE and thermal stability from Cr/Ni-activated in garnet Ca 3 Sc 2 Ge 3 O 12 and their multiple applications in the NIR pc-LED, non-destructive detection, and anticounterfeiting. The proposed A/C-site regulation and ET from Cr to Ni pave a new way to design NIR-I/II phosphor and expands their related optoelectronic applications. Download: Download high-res image (298KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
ENVIRONMENTAL TECHNOLOGY
·
2023
·
IF 2.8
Wenyan Wang,Yunlan Xu,Dengjie Zhong
Ni-EDTA is widely present in electroplating effluents. It cannot be effectively removed by traditional wastewater treatment methods due to its chemical stability. In this study, copper sulphide/cuprous sulphide doped zero-valent iron@carbon (ZVI@C/CuS/Cu2S) was prepared to active peroxymonsulphate (PMS) to decomposition Ni-EDTA. The ZVI@C/CuS/Cu2S + PMS process shows excellent performance under neutral or even alkaline conditions. This is due to the acceleration of ZVI electron transport by CuS/Cu2S, the autocatalysis of CuS/Cu2S itself, and the synergistic effect of CuS/Cu2S and Ni-EDTA. The removal efficiency of 50 ppm Ni-EDTA electroplating effluents reached 99.53% at 10 min, and the discharge water can meet the Chinese emission standard. The influences of the main parameters such as initial pH value, catalyst, PMS and initial Ni-EDTA concentration on removal efficiency was systematically investigated.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2023
·
IF 4.5
Jifang Zhang,Chengcheng Suo,Jinde Sun,Wei Li,Sha Luo,Chunhui Ma,Shouxin Liu
In this study, C α –C β and C β –O bond cleavage of β-O-4 model compound (2-phenoxy-1-phenylethanol) were accomplished by electrocatalysis depolymerization process in deep eutectic solvents (DES) systems. We have investigated the application of Ni-Co/C catalysts on working electrode, which were synthesized with impregnation method. The Ni-Co/C with porous structure and abundant active sites, was shown an excellent electrocatalysis activity. Specific structure of Ni-Co/C could provide greatly efficient adsorption and desorption capacity to promote C α –C β and C β –O bond cleavage. Therefore, in this electrocatalysis depolymerization process, the highest depolymerization rate exceeded 90%. And the yields (and conversion rates) of products (including benzaldehyde, acetophenone, benzoic acid, phenol) can reach to 124.08 mg/g (25.05%), 23.29 mg/g (4.15%), 44.64 mg/g (7.83%), 30.3 mg/g (6.9%). Furthermore, the electrocatalysis mechanism of C α –C β and C β –O bond was investigated. The cleavage of C α –C β and C β –O bond was initiated by in situ generated free radicals through Ni-Co/C. Then, the cleavage of C α –C β and C β –O bond were occurred by ·OH and ·O 2 − . The results were showed that the C α –C β bond cleavage was more in line with the β-C elimination and free radical pathways, and C β –O bond cleavage was consistent with direct oxidative addition. The enhanced electrocatalytic efficiency of the low-cost Ni-Co/C electrocatalyst combined with its good chemical stability and selectivity, which offer a promising route for developing an efficient lignin depolymerization technology.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2023
·Vol. 47
·期 12
·5903-5914
·
IF 3.3
Xiaoqing Wang,Yujie Ren,Hongjing Lu,Zirui Song,Yangdong Cui,Shiyao Jin,Binhe Zhao,Yongjiang Wang,Junzi Zhao,Chunhua Xiong
Using macroporous ion exchange resin macrosphere D113 as an inexpensive organic carbon source, a composite precursor was constructed with Bi(OH)3 using a hydrothermal method. A series of new bismuth-based composite photocatalytic materials, Bi2O3/C, were prepared using pyrolysis technology and it was shown that the bismuth element existed in the form of Bi2O3 in the composite. It was uniformly distributed on the surface of a graphitized carbon macrosphere and exhibited a high electron transfer rate. The UV-vis diffuse reflectance spectrum and photoluminescence verified that Bi2O3/C exhibited a good light absorption performance and a low photogenerated electron hole recombination rate due to the optimized band structure. Electrochemical tests such as an i–t curve and electrochemical impedance spectroscopy showed that Bi2O3/C-500 had a good photoelectric response. In combination with the Tauc curve, the band structure of Bi2O3/C-500 was verified. Bi2O3/C-500 could degrade methylene blue (20 mg L−1) completely in 120 min, and the degradation rate remained at 90.30% for three photocatalytic cycles. The preparation method of the new Bi2O3/C was simple, inexpensive, and convenient for the commercial application of dye wastewater.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2022
·
IF 6.911
Lihua Chen,Wenjie Yang,Dong Li,Yunkang Ma,Lili Chen,Shuang You,Shufeng Liu
Direct discrimination of single-base mismatched dsDNA by a simple method or strategy would provide enormous opportunities for applications in the fields of life sciences and disease diagnosis. Herein, the peroxidase-mimicking activity of a metal-organic framework nanoprobe (MOF) was well exploited for the direct discrimination of single-base mismatched dsDNA based on a competition-induced signal on-off-on mechanism. The single-base mismatched dsDNA related with FecB gene (usually guanine (G)/thymine (T) mismatch) and MIL-88B–NH 2 were used as target and MOF model, respectively. Firstly, polyA/polyC were loosely adsorbed onto the MOFs via the weak interaction to block the peroxidase activity of MOF, inducing the signal transition from on to off. Unexpectedly, the single-base mismatched (GT) dsDNA could reverse the signal response of MOF probe from off to on. But it could not occur for other nonspecific mismatches, such as CT and TT-mismatched dsDNA. A synergistic interaction mechanism between multiple GT mismatches and polyA/polyC was attempted to explain the competitive dissociation of polyA/polyC from MOF for the recovery of peroxidase activity. With it, a wide linear detection ranges from 10 −9 M–10 −5 M of GT mismatched dsDNA and a low detection limit of 0.247 nM could be achieved, even in the real samples. The effect of mismatched base number or position was also studied. Such a simple, rapid, cost-effective, and one-step mixing and checking method for single-base mismatched dsDNA discrimination eliminates the complex sample pretreatment , special DNA probe design, exclusive amplification or signal readout means. It thus offers a simple and effective route for direct discrimination of mismatched dsDNA and might hold a huge potential for the applications in gene analysis, disease diagnosis, and elementary research in life sciences.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING SCIENCE
·
2022
·
IF 4.889
Zhi-Hao Wang,Jing-Pei Cao,Wen Tang,Zi-Meng He,Fei-Long Yang,Ze-Ying Wang,Xiao-Yan Zhao
Recovering beneficial metal ions from industrial effluents by suitable support can be an efficient and environment-friendly way to prepare specific catalysts directly. Herein, modified lignite was developed as an ion exchange material and used to prepare Co-Cu bimetallic catalysts for hydrogen-rich syngas production from steam reforming reactions. For all the catalysts studied, Co 75 Cu 15 /600 (carbonization temperature at 600 °C) exhibits the optimal catalytic activity and stability in both steam reforming of toluene and biomass tar under low temperatures. Fresh and spent catalysts were detailedly characterized to investigate the metal interactions and catalyst deactivation. The introduction of Cu contributes to the formation of Co-Cu alloy and the lower particle size of Co (4.17 nm), thereby suppressing the carbon deposition, the oxidation of metals and the change of catalyst structure after reaction. Therefore, the inexpensive and readily-available Co-Cu/C has the potential to serve as a promising catalyst for large-scale biomass gasification technology.
✓ 已验证
产品关联
DOI
高影响因子