JOURNAL OF VINYL & ADDITIVE TECHNOLOGY
·
2026
·
IF 4
Lizhi Gao,Feiyang Huang,Zulan Liu,Lan Cheng,Yu Bao,Fangyin Dai,Zhi Li
Feeding Bombyx mori ( B. mori ) larvae with incorporated diets for producing the modified silk is an effective and commonly used method. In this study, based on the excellent UV-resistant property and non-toxicity of nano-SiO 2 , an incorporated diet with a high concentration of nano-SiO 2 (up to 4%) was used to feed two commercial strains of B. mori (XF × QB and 871B) for preparing modified silk. The incorporated nano-SiO 2 did not affect the growth, spinning, and cocooning of these silkworms. The modified silk contained a high content of nano-SiO 2 , up to 869.70 mg/kg, obtained for XF × QB, and the maximum stress could increase to 468.38 MPa. Meanwhile, a higher improvement of strain was achieved for 871B, which reached up to 25.41%. Most importantly, the modified silk fibers exhibited the excellent ultraviolet (UV) resistant property; their stress could be well maintained after exposure to 300 MJ/m 2 UV energy. In addition, nano-SiO 2 modified silk exhibited good thermostability and biocompatibility. These results illustrate that the modified silk with improved mechanical and excellent UV resistance can be produced by feeding silkworms with a high concentration of nano-SiO 2 , and this modified silk likely has a wider application in the future. And also, the merits of environmental protection, low cost, and high efficiency for this method provide a huge commercial prospect for sericulture. Summary Nano-SiO 2 doesn't affect the growth, spinning, and cocooning of silkworms. Feeding 4% nano-SiO 2 yields modified silk with 869.70 mg/kg nano-SiO 2 content. Increasing maximum stress to 468.38 MPa for modified silk. Enhanced UV resistance that can maintain stress under 300 MJ/m 2 UV exposure. Improved thermal stability and biocompatibility for modified silk.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER ENGINEERING AND SCIENCE
·
2026
·
IF 3.6
Yuxin Luo,Wenyi Yang,Zhanpeng Xie,Hang Zheng,Wanfen Pu,Feng Jiang
The viscosity and elasticity of water-soluble polymers are critical in the petroleum industry, particularly under high-temperature and high-salinity conditions. In this study, a multi-armed hydrazide-POSS (HPOSS) and a carbonyl-functionalized hydrophobic association polymer (CFHAP) were developed to create dual networks (CFHAP/HPOSS). Unlike conventional binary cross-linkers, HPOSS promoted the formation of dense and stable covalent cross-linked structures. Even at low concentrations of both CFHAP and HPOSS, CFHAP/HPOSS exhibited robust network formation with exceptional thickening properties, achieving a significantly higher viscosity of 3927 mPa·s at 2 g/L compared to the polymer's 410 mPa s and the binary cross-linking system's 2453 mPa s. Under a 40 g/L Na + solution, CFHAP/HPOSS exhibited salt responsiveness by enhancing their hydrophobic network, resulting in a viscosity of 5325 mPa s and a modulus G′ > G″. These enhanced rheological properties were further utilized to improve aqueous foam stability. The results revealed improved foam stability with an extended half-life time (8248 s), low drainage rate (0.0064 g/s maximum), and minimal bubble size distribution variation. SEM images also reveal a fully formed polymer film network, which effectively inhibits foam drainage and coarsening. Our strategy provides valuable insights into developing new materials with adjustable thickening and elastic properties. Highlights A multi-armed hydrazide-POSS is synthesized and used as a crosslinking agent. Dynamic acylhydrazone bond is used to fabricate a network with enough stability. Hydrophobic interaction is used to fabricate a network with salt responsiveness. The prepared polymer exhibits improved viscosity and elasticity.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER ENGINEERING AND SCIENCE
·
2026
·
IF 3.2
Shengbo Jin,Jing Zhao,Bowen Jiang,Jianzheng Cui,Yadi Yang
The present study aims to develop high-performance perfluoroelastomer (FFKM) capable of operating under diverse service conditions. Molecular dynamics simulations were employed to investigate the microscopic interactions between various nanofillers and the FFKM matrix. This included analyses of energy variations, radial distribution functions, and molecular chain orientation. A series of complementary experimental characterizations were conducted in order to examine the tensile failure behavior and elucidate the microscopic mechanisms of friction and wear. The results confirmed the accuracy of the microscopic interaction mechanisms obtained from simulation. An appropriate increase in hardness effectively enhanced tensile strength and modulus while reducing both the friction coefficient and wear rate. The incorporation of nanomaterials has been demonstrated to transform the tensile failure mode of FFKM from predominantly brittle fracture to predominantly plastic deformation. Among the composites, carbon nanotubes/perfluoroelastomer exhibited the best overall mechanical performance, graphene nanosheets/perfluoroelastomer demonstrated the lowest friction coefficient, and nano-silica/perfluoroelastomer showed superior cleanliness performance, making it advantageous in applications requiring high purity. Summary MD simulations reveal the microscopic interactions of nanocomposites. The mechanical properties of CNT/FFKM are more excellent. The Friction coefficient of GN/FFKM is lower. Hardness can effectively improve the performance of materials. Nano-fillers have changed the failure mode of composite materials.
✓ 已验证
产品关联
DOI
高影响因子
POLYMER ENGINEERING AND SCIENCE
·
2026
·
IF 3.6
Xinyue Yang,Lei Zhang,Liangshuai Ni,Chen Zhang,Zhongjie Du,Wei Zou
This study presents a novel strategy for fabricating multifunctional silicone rubber foam with low dielectric constant and excellent cushioning properties by incorporating surface fluorinated hollow microspheres. Thermally expandable microspheres (TEMs) were firstly modified with 3,3,3-(trifluoropropyl) trimethoxysilane (TFPS) by the bridge of γ-aminopropyl triethoxysilane (KH550). The effects of pH and TFPS dosage on fluorine content on the surface of the obtained fluorinated and silane-modified TEMs (F-TEMs) were investigated. When F-TEMs were added into room-temperature-vulcanized silicone rubber (RTV) and served as both foaming agents and dielectric modifiers, the obtained fluorinated silicone rubber foam (FSR foam) showed a uniform closed-cell structure with enhanced interfacial compatibility. Based on the optimized fluorine content and addition of F-TEMs, the low dielectric constant of 2.51 and the dielectric loss of 0.066 at 10 Hz, excellent cushion property, low density, and good thermal stability of the composite foam were achieved simultaneously. This work provides a scalable and efficient approach to developing multifunctional polymer foams suitable for high-frequency electronics, aerospace, and wearable devices.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF FOOD SCIENCE
·
2026
·Vol. 91
·期 2
·e70821
·
IF 4.1
Zeynep Karahaliloğlu,Baki Hazer
Unlike conventional preservation methods that passively store food, active packaging materials proactively prevent microbial contamination and, when combined with polyphenols, can also serve as intelligent systems for freshness monitoring. In this study, polypropylene (PP)-based membranes incorporating curcumin (Cur) and quercetin (Quer) were developed and characterized to evaluate their potential use in food packaging applications. The membranes exhibited low water vapor permeability, indicating strong barrier properties. Among the formulations, the PP-Cur-A2 (Cur-loaded PP-A2, where A2 refers to chlorinated polypropylene (PP-Cl) obtained from Sigma-Aldrich) membrane showed superior mechanical performance (tensile strength: 24.10 ± 1.06 MPa; elongation at break: 378%) and achieved complete curcumin release within 20 days. Importantly, the membranes displayed distinct color transitions under different pH conditions, confirming their functionality as pH-responsive indicators. In addition, when tested both with fresh shrimp in Petri dishes and in aqueous ammonia environments, the membranes exhibited visible and progressive color changes in response to spoilage-related volatile compounds. Overall, the developed membranes demonstrated efficient bioactive release, excellent barrier characteristics, and reliable colorimetric indicator functionality, underscoring their promise for sustainable and intelligent food packaging applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF FOOD SCIENCE
·
2026
·Vol. 91
·期 2
·e70792
·
IF 3.4
Qingqing Zou,Xin Wang,Shan Mou,Pei Zhang,Yingjuan Wang,Yun Wu,Xiaofang Tian,Meijie Xie,Qianchun Zhang
The rapid, sensitive, and cost-effective detection of tannic acid (TA) in complex food matrices is essential for improving food safety standards. To meet this demand, nitrogen-doped carbon quantum dots (N-CDs) were prepared using a one-pot hydrothermal reaction using L-malic acid, citric acid, and tris(2-aminoethyl) amine as precursors. The excitation wavelength of the N-CDs was 430 nm, and the emission wavelength was 490 nm. Transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared (FT-IR) spectroscopy, and X-ray diffraction (XRD) were used to characterize the prepared N-CDs, and the results revealed a uniform morphology and a nitrogen-rich surface structure. In addition, we found that the N-CDs exhibited excellent selectivity for TA, primarily attributed to the fluorescence quenching effect of TA on the N-CDs. Therefore, a fluorescent sensor for TA detection was constructed based on the N-CDs, with a linear detection range of 0.500-250 µM ( R 2 = 0.99987) and a detection limit of 0.15 µM ( S/N = 3). The practical applicability of the sensor was demonstrated by analyzing TA in beer, red wine, and apple juice, achieving recoveries ranging from 101% to 116% and RSDs between 3.0% and 5.4%. The fluorescence assay results were closely related to the HPLC-DAD validation results, highlighting the accuracy of the method. The N-CDs-based detection platform offers the advantages of simplicity, sensitivity, and reliability, providing a promising tool for routine TA monitoring in food safety applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 4.7
Guizhen Lin,Kaiqi Zhang,Luyao Wei,Yuchen Mao,Shenglong Shang
Passive radiative cooling and heating technologies have garnered significant attention in both the academic and industrial communities as sustainable alternatives to conventional energy-intensive thermal management approaches. Significant advances have been achieved in textiles with dual passive radiative cooling and heating capabilities. However, current designs remain static in configuration, exhibiting inadequate adaptability to seasonal weather variations. Herein, we propose a dual-mode operational mechanism enabling all-day passive radiative cooling and heating. An asymmetric PLA/PBS/TiO2-MXene composite fiber membrane with dual-sided thermal management capabilities was fabricated via the integration of electrospun PLA/PBS/TiO2 fiber membrane and MXene coatings. A layered architecture was engineered to establish differential emissivity on opposing sides of a fiber membrane substrate, thereby enabling rapid switching between radiative cooling and heating functionalities. During outdoor thermal testing, the dual-sided fiber membrane demonstrated efficient passive radiative cooling and heating capabilities. The cooling side achieved temperature reductions of 4.1–10.0 °C, while the heating side attained temperature increases of 11.8–18.1 °C, under solar irradiance of 831.4–1057 W/m2. In addition, the asymmetric fiber membrane demonstrated decent chemical recyclability, providing a way for developing sustainable cooling/heating materials.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE & TECHNOLOGY
·
2026
·
IF 11.3
Pu Xia,Pingping Wang,Shengnan Liu,Ying Peng,Xiao Gou,Haoyue Tan,Jing Guo,Wei Shi,John K. Colbourne,John P. Giesy,Xiaowei Zhang
Omics-based evaluation of neurotoxicants is challenged by limited ability to translate molecular signals into phenotypic effects. We developed an Adverse Outcome Pathway (AOP) network-based framework to interpret concentration-dependent transcriptomics in zebrafish embryos in relation to behavioral outcomes. An annotation of key events (KEs) to zebrafish molecular pathways was curated to enable mapping of zebrafish transcriptomics to the AOP network. Concentration-dependent transcriptomics of 24 environmental chemicals identified concentration-responsive KEs (CRKEs) that differentiated neurotoxic from non-neurotoxic compounds. Transcriptomic points of departure (tPOD) were significantly correlated with behavioral apical POD (aPOD) (R2 = 0.539, P < 0.01), indicating the potential for predicting tPOD from transcriptomics. Time- and concentration-dependent transcriptomics of five model chemicals identified 12 time-responsive KEs (TRKEs) across four developmental stages. Partial least-squares regression integrating neurotoxicity-relevant CRKEs and TRKEs showed the best performance to estimate aPOD (slope = 0.70, R2 = 0.64, RMSE = 0.9, P = 1.30 × 10–5). External validation using published fish transcriptomics data showed that estimated aPOD values from 8 of 14 chemicals were within 1 order of magnitude of measured aPOD. The findings support AOP network-guided omics analysis as a promising approach for quantitative neurotoxicity assessment, contributing to the use of omics into new approach methodologies (NAMs).
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Polymer Materials
·
2026
·
IF 5.2
Mengyuan Qi,Bing Gao,Changhai Xu,Jinmei Du,Jiaqi Liu,Hongying Yang
Basalt fiber (BF), as a high-performance inorganic fiber, exhibits excellent overall properties, including high strength, high modulus, corrosion resistance, and flame retardancy. However, its dense structure, smooth surface, and chemical inertness lead to monotonous coloration and difficulty in dyeing. In this study, cationic waterborne polyurethane (WPU) was employed as a modifier for pretreating BF fabrics and underwent protonation to create positive charges under acidic conditions, enabling dyeability with acid dyes. Three types of WPU films (MWPU, DWPU, and TWPU) were created by grafting cationic chain extenders N-methyldiethanolamine (MDEA), 3-Dimethylaminopropane-1,2-diol (DMAD), and N-t-Butyldiethanolamine (TBDEA) onto the polyurethane chains, with all light transmittances exceeding 90% and ζ potential over 50 mV to ensure robust bonding with anionic dyes. The tensile strength of fabrics modified with WPU increased by more than 71%, and their strain also improved significantly. MWPU served as the best modifier for coloring, with the 10%MDEA dosage formulation reaching a K/S value of 12, and the dye uptake rate showing 81.1%. It also exhibited excellent fastness, with sunlight fastness at grade 5, minimum rubbing fastness at grade 3∼4, and washing fastness at 4 or higher. We employed a straightforward structure to impart color to BF fabrics, achieving outstanding color fastness and offering an effective approach to advancing the application of colored inorganic textiles.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2026
·
IF 7.8
Ze-Peng Bai,Ruoxi Zhang,Zi-Ying Xu,Hua Zou,Jie-Xin Wang
Heterogeneous catalyst-mediated photocatalysis is widely acknowledged as a highly promising approach for the efficient degradation of persistent antibiotics in water. In this study, a hydrophilic Cu2O/polyacrylonitrile (PAN) porous nanofiber membrane was synthesized by the electrospinning technique combined with a convenient poly(ethylene glycol) (PEG)-assisted template-removal method for photocatalytic degradation of tetracycline (TC). The Cu2O/PAN porous nanofibers (NFs) exhibited excellent photocatalytic degradation activity under visible-light irradiation, with degradation efficiencies and kinetic constants that were approximately 1.55-fold and 2.35-fold higher than those of nonporous Cu2O/PAN NFs, respectively. This enhancement resulted from a greater exposure of active components and a more hydrophilic fiber structure. Moreover, this composite fiber demonstrated exceptional stability, still maintaining a TC degradation rate of over 95% even after eight cycles, effectively addressing the instability and poor recyclability issues of Cu2O nanoparticles (NPs). In addition, this multifunctional nanofiber exhibited outstanding antibacterial activity against S. aureus and E. coli, achieving over 99% bacterial inhibition with a minimal nanofiber dosage under dark conditions. This work provides profound insights into the rational design and scalable fabrication of the porous multifunctional nanofiber membranes, thereby laying a solid foundation for the practical applications in water purification and antimicrobial materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2026
·
IF 6.7
Huixia Di,Zhouhao Lei,Jianing Li,Xiaochun Li
The accurate detection of hazardous pesticide residues is crucial for public health. Surface-enhanced Raman scattering (SERS) holds potential but faces practical limitations, including spectral overlap and matrix interference. To address these limitations, we developed a convolutional neural network (CNN)-assisted SERS platform with a hybrid substrate comprising a silver nanostar (AgNS) and hydrophobic silver nanoisland film (AgNIF). This platform synergizes localized surface plasmon resonance with a local concentration effect to achieve high sensitivity, demonstrating a broad linear range and low detection limits for nine pesticides. Coupled with an optimal data preprocessing protocol, our CNN model achieved superior classification accuracy: 99.44% for single pesticides, 98.47% for binary mixtures, 98.09% for ternary mixtures, and 94.60% in spiked tomato samples. Therefore, this work demonstrates a label-free, sensitive and accurate tool for pesticide detection and identification, holding great promise for guiding pesticide application and ensuring food safety.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2026
·
IF 7.3
Shiyu Huang,Yinze Yang,Yan Du,Pengxiao Wei,Yafei Zhao,Huishan Shang,Dan Wang,Dongyang Li,Bing Zhang
A bifunctional Cu/CeO2/halloysite catalyst was rationally constructed via strong electrostatic adsorption to enable switchable conversion of furfural into either furfuryl alcohol or isopropyl furfuryl ether. Highly dispersed Cu nanoparticles are anchored on CeO2 nanoislands supported by acid-etched halloysite nanotubes, creating a unique “support–adjuvant–active site” synergy. This architecture facilitates H2 activation and tandem hydrogenation–etherification, allowing precise temperature-controlled pathway selection. Under mild conditions, furfural hydrogenation to furfuryl alcohol proceeds via a low-energy barrier (0.9 eV) with a stable intermediate, whereas etherification requires overcoming a significant barrier (1.6 eV), becoming favorable only at elevated temperatures. In situ FTIR, kinetic studies, and DFT calculations reveal the mechanistic origin of this selectivity. The catalyst displays high activity, tunable selectivity, and robust recyclability, providing a versatile strategy for controlling reaction pathways in the valorization of biomass-derived platform molecules.
✓ 已验证
产品关联
DOI
高影响因子