FOOD CHEMISTRY
·
2026
·
IF 10.4
Yadong Wang,Haoying Han,Zirui Guo,Jing Dong,Xiaochun Yang,Xiaodong Li,Bei Wang
Spatial metabolomics reveals heterogeneous lipid distribution during MC ripening. • Multi-omics suggests associations between lipid metabolism and methyl ketone formation. • Fatty acids and methyl ketones show sequential changes during MC ripening. • Microbial succession is associated with shifts in lipid metabolism. Methyl ketones play a crucial role in shaping the characteristic aroma of Monascus -fermented cheese (MC). However, their formation pathways within complex solid-state fermentation systems are not yet fully understood. Spatial metabolomics was integrated with lipidomics, sensomics, metagenomics, and metaproteomics to investigate lipid transformation and methyl ketone formation during MC ripening. Glycerophospholipids showed distinct spatial distribution patterns during mid-ripening, supporting spatially heterogeneous lipid transformation. Temporal analysis revealed sequential dynamics, with early accumulation of medium-chain fatty acids followed by increased methyl ketone production. Multi-omics data further suggested stage-specific associations between microbial succession and metabolic functions, with Lactococcus -associated lipid hydrolysis in the early stage and Monascus -associated downstream β -oxidation-related processes during later ripening. A spatially coordinated metabolic framework involving lipid hydrolysis, fatty acid transformation, and decarboxylation is proposed, providing insights into flavor formation and its regulation in complex fermented systems. Download: Download high-res image (245KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Boding Zhang,Xiaobo Feng,Jumei Wang,Zhenluo Yuan,Shuyan Guan,Jiameng Liu,Yunhui Yan,Dong Liu,Tianjun Ni,Baozhong Liu
Cobalt-modulated D-A 3D-COF for superior photocatalytic PMS activation. • Efficient exciton dissociation and enhanced charge separation. • Outstanding pollutant removal and reduced ecological toxicity. The practical application of covalent organic frameworks (COFs) in photocatalytic peroxymonosulfate (PMS) activation is often constrained by sluggish charge kinetics and limited mass transfer. Herein, we construct a series of three-dimensional (3D) donor-acceptor (D-A) COFs to concurrently address these dual challenges. The unique 3D architecture features interconnected porous channels that provide accessible pathways for reactant transport, while metalloporphyrin based D-A engineering significantly enhances charge separation and migration. As a result, the optimized 3D Co COF combines an accessible hierarchical pore network with accelerated charge kinetics, achieving 95.25% SMX removal within 100 min under visible light. Combined experimental and theoretical analyses confirm that the 3D D-A structure with cobalt incorporation fine-tunes the electronic configuration, reduces the exciton binding energy, and facilitates the generation of reactive oxygen species. Moreover, the system exhibits robust continuous-flow performance under visible-light irradiation and effective SMX degradation under natural sunlight, together with favorable detoxification and antibacterial activity. This work highlights the great promise of 3D COFs in overcoming intrinsic kinetic and transport limitations for advanced oxidation processes. Download: Download high-res image (314KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
Food Bioscience
·
2026
·
IF 6.2
Wenhui Fu,Xuemeng Ji,Dongze Qin,Lingda Zhao,Huan Lv,Yaozhong Hu,Ruican Wang,Wentao Gu,Dongfei Tan,Shuo Wang
Chemotherapy-induced intestinal mucositis is a common and clinically important adverse effect. However, its underlying mechanisms remain poorly understood and effective interventions are limited. This study investigated the protective effects of a cell-free L. rhamnosus -fermented cereal fraction against 5-fluorouracil (5-FU) induced CIIM in a murine model. L. rhamnosus fermentation markedly enhanced the functional value of the cereal matrix by enriching soluble fermentation-derived bioactives, including TCA-soluble peptide content, total phenolic and flavonoid content, and lactic acid. Prophylactic administration of the fermented cereal fraction attenuated 5-FU-induced mucosal injury, enhanced intestinal antioxidant capacity, improved mucosal architecture and barrier-related indices, and suppressed epithelial apoptosis. Exploratory quantitative proteomic analysis identified candidate proteins whose abundance was altered following 5-FU treatment, including proteins associated with antioxidant defense, apoptosis, cytoskeletal organization, and epithelial barrier-related processes. In contrast, fermented cereal intervention restored the expression of key endogenous antioxidant and barrier-associated proteins. Notably, the final pH-matched lactic acid control indicated that low final pH and the direct presence of lactic acid were insufficient to account for the protective effects of the fermented cereal fraction, suggesting that multiple fermentation derived components contributed to the observed bioactivity. Collectively, these findings indicate that L. rhamnosus -fermented cereal mitigates CIIM through fermentation-enhanced exogenous antioxidant delivery, support of endogenous antioxidant defenses, and attenuation of mucosal and barrier-related alterations. This study supports the potential of cereal fermentation-derived bioactives as functional dietary ingredients for managing CIIM.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Jiaxin Tang,Jingke Liu,Xinhui Chen,Quanyuan Qiu,Wanqi Peng,Xinyuan Fu,Chenxi Shi,Xiaoqing Lin
Efficient separation of levulinic acid (LA) from biomass hydrolysates remains a major challenge, particularly at high LA concentrations where conventional fixed-bed adsorption suffers from increased competitive adsorption, long cycle times, and high solvent consumption. This study developed a four-zone continuous chromatographic separation process using the hyper-cross-linked resin SY-01 for the recovery of high-concentration LA from simulated biomass hydrolysates. Adsorption equilibrium, competitive adsorption, and kinetic behaviors were first investigated, followed by optimization of fixed-bed adsorption and construction of a continuous chromatographic system. The separation performances of the two operating modes were then quantitatively compared under identical conditions. SY-01 exhibited high adsorption capacity and rapid adsorption kinetics toward LA, while the continuous system achieved stable operation with a peak LA concentration of 321.15 g/L (3.21-fold enrichment). Compared with conventional fixed-bed adsorption, continuous operation reduced cycle time by 86.8%, ethanol consumption by 65.7%, and water consumption by 40.0%, while substantially increasing process throughput. These results demonstrate that integrating SY-01 with four-zone continuous chromatography provides an efficient, economical, and environmentally friendly strategy for industrial recovery of high-concentration levulinic acid.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Jianfeng Chen,Na Yang,Shuo Guo,Zhengfu Jiang,Xiaoshan Jin,Yichuan Dai,Ben Huang,Xiaoxiao Chen
A flexible P-PSML piezoresistive sensor via synergy of PAM/SA, MXene/LM, and pyramid microstructures. • The sensor achieves 151.5 kPa −1 sensitivity, 2.23 Pa ultralow detection limit and reliable cycling stability for weak pressure detection. • Integrated with a 1D-CNN model, the system realizes 97.85% handwritten letter recognition and real-time robotic arm interactive control. Hydrogel-based piezoresistive sensors hold great promise for handwriting-enabled human-machine interaction. Accurate detection of weak, transient, and highly similar handwriting pressure signals remains a critical bottleneck for achieving high-fidelity interaction. Herein, a high-performance PAM/SA double-network hydrogel-based sensor is proposed, integrating a synergistic MXene/LM conductive network and tailored microstructures. The MXene/LM synergistic network enhances electrical responsiveness and cyclic stability, while tailored surface microstructures improve low-pressure sensitivity and broaden the linear working range by modulating stress distribution and contact-area evolution. The resulting P-PSML sensor exhibited a high sensitivity of 151.5 kPa −1 , an ultralow detection limit of 2.23 Pa, a response time of 115 ms, and reliable electrical stability over 3000 cycles. Furthermore, the sensor captures dynamic electrical signals from 26 handwritten English letters, achieving 97.85% recognition accuracy via a deep learning model. A real-time handwriting signal processing and recognition platform is further built to translate recognition outputs directly into robotic-arm control commands. This work extends handwritten-letter recognition to practical human-machine interaction and provides a feasible sensing strategy for intelligent flexible handwriting interfaces. Download: Download high-res image (186KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2026
·
IF 6
Qiu-Yu Luo,Kun Huang,Zi-Yuan Wang,Chong-Yu Wang,Jing Feng,Yi-Xin Zhang,Zhen-Hua Ge
Bi 2 Se 2 S is an emerging n-type thermoelectric material with low-cost and intrinsically low thermal conductivity. In this study, a halogen-doping strategy involving F, Cl, Br, and I was systematically investigated to optimize the thermoelectric transport properties of Bi 2 Se 2 S. Experimental characterizations and density functional theory calculations confirmed preferential halogen occupation at S sites, with Br exhibiting the highest donor-doping efficiency. The incorporation of Br weakens local covalent constraints and facilitates electron delocalization, thereby driving the Fermi level deep into the conduction band and activating multi-band transport. The carrier concentration increases from 1.15 × 10 19 cm −3 to 4.76 × 10 20 cm −3 , and the Bi 2 Se 2 S 0.97 Br 0.03 specimen achieves a peak power factor of 517 μW m −1 K −2 at 773 K. Beyond electronic optimization, Br doping triggers a multiscale structural evolution characterized by point defects, dislocation clusters, nanoscale homo-composition and hetero-structure phases, and grain boundaries. This hierarchical architecture scatters phonons across a broad frequency range, thereby suppressing the lattice thermal conductivity to 0.27 W m −1 K −1 at 773 K. Ultimately, a peak ZT of 0.9 at 773 K and an average ZT of 0.43 are obtained. These findings establish that carrier concentration regulation coupled with multiscale defect engineering offers a viable route for advancing bismuth chalcogenide thermoelectrics.
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Cheng Xue,Xue Chen,Shuxin Zhang,Yifan Song,Yan Zhang,Geng Li,Siwei Sun,Min Liu,Yang-Hui Luo
Amoisture-enabled power generator integrating multiple stable asymmetric structures was constructed. • Hofmeister effect and ion occupation effect have been found synergistically enhanced the capability. • A peak power density of 10.5 μW·cm −2 with sustained discharge for 100 h have been achieved. • A portable power supply was fabricated that realizing stable power delivery. Inspired by the thermohaline-driven operation of ocean currents, this work developed an asymmetric hydrovoltaic energy generator (AHEG) with all-weather stable output capability by integrating multiple asymmetric structures to drive continuous water and ion migration. Materials characterization and testing confirmed the stable existence of multiple asymmetric structures within AHEG, including moisture asymmetry, temperature asymmetry, ion concentration asymmetry, and surface potential asymmetry. Benefiting from these asymmetric structures, AHEG achieved a power density of 10.5 μW cm −2 , self-charging capability, and 100-h stable discharge, outperforming most reported moisture-enabled generators. Theoretical calculations further confirmed the synergistic role of Hofmeister and ion occupation effects in boosting AHEG performance. Furthermore, a portable power supply constructed through simple integration could drive miniature devices, providing insights into the development of novel high-performance HEGs. Inspired by the operation of thermohaline-driven ocean currents, a hybrid moisture- enabled power generator integrating multiple asymmetric structures has been developed, with conductive substrate and polyelectrolyte constitute the basic power generation unit, while localized thermal management enabled by radiative cooling film and photothermal conversion capability of conductive substrate simulate the temperature variation patterns of the Earth's poles and equator, respectively, achieve a outperforming power density of 10.5 μW·cm −2 , with self-charging capability and 100-h stable discharge prefoemance. Download: Download high-res image (163KB) Download: Download full-size image
✓ 已验证
产品关联
DOI
高影响因子
BIOMACROMOLECULES
·
2026
·Vol. 27
·期 8
·5725-5741
·
IF 5.9
Wang Nengqing,Li Linying,Wang Mingyang,Gao Ya,Wang Yingbo
Microenvironmental imbalance and bacterial infection
are core causes
of intractable chronic wounds by hindering nutrient transport and
tissue repair. Herein, we innovatively fabricated a hydrophilic antibacterial
scaffold based on silk fibroin (SF) and uniformly integrated it into
PEGDA microneedle (MN) matrices. The composite MN system can efficiently
load hydrophilic model drugs including lidocaine and rhodamine B,
achieving uniform drug incorporation and improved drug-loading versatility
with controllable, long-term sustained drug release behavior. Biological
tests verified that the developed MN possesses excellent broad-spectrum
antibacterial capacity against Staphylococcus aureus and Escherichia coli . It also exhibits
favorable biocompatibility without obvious cytotoxicity and effectively
promotes cell migration. In vivo experiments on full-thickness skin
defect models demonstrated that the MN remarkably accelerates wound
healing and optimizes healing quality. This work offers an innovative
technical strategy for antibacterial drug delivery microneedles, holding
great potential for clinical chronic wound treatment.
✓ 已验证
DOI
PubMed
高影响因子
TRIBOLOGY INTERNATIONAL
·
2026
·
IF 7.6
Chen Lin,Wenrui Liang,Chenyu Liu,Jinlong Huang,Yaowei He,Jiabin Lu
To address the low material removal rate (MRR) and low abrasive utilization of free abrasives as well as severe surface damage in fixed abrasive polishing, this paper proposes a pore-confined free abrasive (PC-FA) polishing disc based on Diamond@phenol-formaldehyde resin (PFR) composite abrasives for single-crystal SiC. In ethanol slurry, the PFR shell of composite abrasives dissolves selectively, confining the inner diamond cores within in-situ generated pores to act as dynamic free abrasives for high-quality, low-damage precision machining. Diamond@PFR abrasives were synthesized by solution suspension and characterized via SEM, XRD and LPSA. Three polishing discs (fixed diamond, fixed composite, PC-FA) were fabricated for comparative polishing tests. The PC-FA polishing disc achieved an MRR of 1.07 μm·h −1 and an Sa of 1.38 nm, reduced the surface roughness by 54.6% and 48.1% compared with the two fixed abrasive polishing discs. ABAQUS simulations combined with friction tests clarify the removal mechanism. Fixed abrasives bear rigid constraints, causing concentrated contact stress, deep straight scratches and two-body wear. Pore-confined diamonds move randomly with multiple degrees of freedom, thereby homogenizing stress and generating shallow and sparse scratches, as reflected by a reduced Rku value and an elevated Rsm value, with flexible three-body wear dominating material removal. This disc realizes in-situ fixed-to-free abrasive transition, achieving moderate material removal with high-quality and low-damage machining, and offers a new route for processing third-generation semiconductor substrates.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sensors
·
2026
·Vol. 11
·期 8
·7606-7620
·
IF 10.9
Zhao Youwei,Zhang Xinyuan,Liu Wanqing,Wang Pi,Li Hang,Li Zewen,Li Ling,Zhang Wenming
Electrooculography (EOG) offers a direct electrophysiological window for objective fatigue assessment under prolonged visual load. However, skin-mounted EOG sensors face an inherent trade-off between maintaining signal stability and ensuring long-term wearability and skin comfort. Herein, inspired by spider-silk architectures, we report an environmentally robust, multifunctional EOG-fusion sensor based on a hierarchically engineered, cavity-structured bioelectrode that integrates an uncarbonized PAN@MXene-ZIF spacer with a carbonized conductive core. This state-engineered architecture enables simultaneous EOG, electromyography (EMG) and pressure sensing, while providing outstanding bioprotection (cell viability >99.5%) and broadband optical shielding (99.5% UV and 99.9% NIR blocking), together with microwave absorption (RL min = [−59] dB, EAB of 1.26 GHz (X band)). The pressure channel delivers high sensitivity (345.08 kPa −1 ), rapid response/recovery (80/80 ms) and an ultralow detection limit of 20 Pa. The low-impedance bioelectric interface uses lightweight 1D-CNN and BiLSTM models, combined with data processing techniques, to achieve 94.21% accuracy in recognizing 9 types of eye movement patterns and effectively assess the degree of visual fatigue in immersive VR environments.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2026
·
IF 9.1
Rongpeng Yu,Qinya Huang,Wanyi Wang,Liangyin Xiang,Shakeel Zeb,Zhanchao Liu,Zheng Chuanbo,Yan Liu
This study explores the synthesis and application of a 2D block -shaped covalent organic framework(COF) and its integration into a surface molecularly imprinted polymers(SMIPs) for the selective adsorption of Myricetin(Myr) from food samples. The COF was synthesized using a binary deep eutectic solvent(DES1) composed of choline chloride and glycerol, while the molecularly imprinted polymers(MIPs) were polymerized on the surface of the COF utilizing a ternary deep eutectic solvent(DES2), consisting of choline chloride, acrylamide, and ethylene glycol. After optimizing the proportion of DESs, the resulting 50%-DES applied to COF(DC)-MIP exhibited a high adsorption capacity of 40.04 mg/g within 0.5 h at pH 6.0. The adsorption process, characterized by Langmuir isotherms and pseudo-second-order kinetics, was exothermic. The XPS and UV–Vis spectra confirm the adsorption mechanisms, indicating that Myr adsorption onto the COF-based MIP was predominantly driven by hydrogen bonding and π-π stacking interactions. Due to the COF serving as the matrix material, which enhances the structural stability and solvent resistance of the polymer, the 50%-DC-MIP demonstrated excellent recyclability, maintaining consistent performance over five cycles. Because of excellent selectivity, the 50%-DC-MIP was effectively employed to grape juice, bayberry juice and green tea resulting in satisfactory recoveries of 94.67% to 102.25%, 93.75% to 108.33% and 97.33% to 101.15%, respectively. These findings highlight the potential of COF-based MIPs for the selective extraction and detection of bioactive compounds like Myricetin in complex food samples, aligning with green chemistry principles by utilizing DES as environmentally friendly solvents.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2026
·
IF 8.3
Xudong Liang,Yuchen Duan,Xiangyu Li,Fujia Zhao,Yunwei Li,Yiming Jian,Lei Shi,Jiayu Li,Guo-Dong Li
Detection of 3-hydroxy-2-butanone (acetoin), a characteristic volatile metabolite of Listeria monocytogenes (LM) , represents a promising non-invasive strategy for monitoring contamination levels of foodborne pathogens in food. However, current sensing materials suffer from poor selectivity and insufficient sensitivity at trace concentrations. Herein, a series of Pd-loaded Cd 2 GeO 4 (Pd/CGO) chemiresistive gas sensors that achieves highly selective and sensitive acetoin detection was reported. Among them, the 0.5 wt% Pd/CGO-based sensor exhibits a high response, with an ultrafast response time and a detection limit as low as 10 ppb. The sensor also demonstrates excellent selectivity over common interfering gases, good reproducibility, and robust long-term stability. Mechanistic investigations combining O 2 -TPD, XPS, and DFT calculations reveal that Pd loading not only increases the proportion of chemisorbed oxygen species on the CGO surface, which enhances the overall sensing response, but also serves as new active sites. This work demonstrates that rational Pd modification combined with dual-site engineering offers a promising paradigm for designing high-performance metal oxide gas sensors for pathogen biomarker detection in food.
✓ 已验证
产品关联
DOI
高影响因子