文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,550+ SCI 论文 与阿拉丁产品引用相关
2,304,480.59 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第4453至4464个,产品总数347,550个

切换升序
Environmental Progress & Sustainable Energy · 2026 · IF 2.6

Preparation and properties of modified holocellulose-reinforced poly(propylene carbonate)/poly(butylene adipate-co-terephthalate) composites

Yongshuang Li,Jifei Liu,Chuanfeng Li,Bing Xu,Yifei Long,Cheng Pan,Guozhi Fan

Holocellulose was modified by lauric acid to prepare holocellulose laurate (HL), which was further melt-blended with poly(propylene carbonate) (PPC) and poly(butylene adipate- co -terephthalate) (PBAT) to produce the HL/PPC/PBAT composite. The composite was characterized in detail, and the results indicated that the compatibility among the components was improved due to the addition of HL. The properties of the HL/PPC/PBAT composites were investigated by varying the amount of HL, and good comprehensive properties were observed when 13 wt % HL was used. The tensile strength, elongation at break, and elastic modulus were 7.28 MPa, 44.47%, and 48.80 MPa, respectively. The hydrophobicity, gas barrier properties, biodegradation properties, and preservation properties were also enhanced by adding HL. Compared with PPC/PBAT, the elastic modulus, contact angle, and biodegradation rate of the composite increased by 5.19%, 10.46%, and 26.58%, while the water vapor transmission and oxygen permeability were reduced by 15.7% and 22.6%, respectively. Moreover, the preservation property of the composite was close to that of the commercial polyethylene cling film. Therefore, the HL/PPC/PBAT composite had promising application prospects in the degradable packaging field. The application of holocellulose as the filler for degradable materials not only expands the potential application of lignocellulosic biomass but also reduces the environmental pollution caused by petroleum-based plastics.

CAS / MDL: 1662-01-7 407-25-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
AICHE JOURNAL · 2026 · IF 4

Regulating silica/alumina ratio of LTL zeolites for acetylene/ethylene separation

Xiaoling Liu,Mingzhen Wang,Ting Li,Jiao Wei,Tian Rong,Qiqi Liu,Yajie Wang,Yu Zhou,Jun Wang

Efficient removal of trace acetylene (C 2 H 2 ) from ethylene (C 2 H 4 ) is crucial for polymer production, yet remains challenging for physisorption separation owing to their molecular similarity. Herein, we synthesized a series of LTL zeolites with varied Si/Al ratios via an acid co-hydrolysis route. The optimal adsorbent LTL(2.3) with a low Si/Al ratio of 2.3 exhibited both high C 2 H 2 uptake (2.79 mmol g −1 ) and C 2 H 2 /C 2 H 4 (1/99, v / v ) selectivity of 26.84 at 1 bar and 298 K, as well as superior dynamic separation efficiency. Structural refinement based on high-resolution powder X-ray diffraction (PXRD) patterns illustrates that reducing Si/Al ratio provides more K + cation that serves as the strong C 2 H 2 binding sites, thereby promoting the C 2 H 2 /C 2 H 4 separation. Moreover, the optimal LTL zeolite also demonstrates favorable separation efficiency towards other gas mixtures (e.g., CO 2 /N 2 , CO 2 /CH 4 , C 2 H 4 /C 2 H 6 , and C 3 H 6 /C 3 H 8 ), showing the promising potential as a versatile adsorbent for gas separation and purification.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ChemistrySelect · 2026 ·Vol. 11 ·期 5 ·e04413 · IF 2.3

Preparation of Acid-Resistant Ammonium Molybdophosphate Spheres for Removal of Cs+ From Analog High-Level Liquid Wastewater

Wanjun Mu,Rui Zhang

The selective removal of radionuclide 137 Cs from high-level liquid wastewater (HLLW) remains a big challenge due to its high radioactivity, high acidity, and complex constitution. Ammonium molybdophosphate (AMP) is considered to be an excellent adsorbent for efficient removal of Cs + from complex systems, but it is challenging to use in practical HLLW contexts due to its fine powder size. To solve the issue, a new AMP-polytetrafluoroethylene (AMP-PTFE) composite was prepared by loading AMP particles onto the surface of PTFE sphere and possessed a larger specific area, which favors to column separation in the practical process. Remarkably, this composite also exhibited the considerable stability and adsorption properties under high concentrations of HNO 3 , and the maximum adsorption capacity of Cs + onto AMP-PTFE in 3 mol L −1 HNO 3 solution fitted by a Langmuir model is 53.42 mg g −1 , which was higher than that of similar adsorbents. In addition, kinetic studies indicated that Cs + adsorption on AMP-PTFE was fast and reached adsorption equilibrium within 60 min in 3 mol L −1 of HNO 3 , and the adsorption data had a good fit to pseudo-second-order kinetics, which were attributed to the loading and dispersing of AMP on the surface of PFTE spheres, providing much more adsorption sites favorable to ion-exchange between NH 4 + and Cs + . Notably, the adsorption performance of AMP-PTFE hardly decreases after five cycles of adsorption–desorption. These results demonstrated that loading of AMP onto PTFE spheres was an effective way to promote AMP material application in a stronger acidic environment, and the prepared AMP-PTFE material presented a promising potential for the removal of 137 Cs from the actual HLLW systems.

CAS / MDL: 54723-94-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ChemCatChem · 2026 ·Vol. 18 ·期 4 ·e01867 · IF 4.1

Synthesis, Modification, and Consequence of MCM-22 Zeolite From a Mother Liquor Recycling Procedure for Methanol to Olefins Reaction

Shiao Gao,Xiliu Wang,Lei Hu,Zhennan Yang,Xiao Zhang,Yingshuo Guo,Yu Deng,Xinyu Li,Zhijie Wu

Here, MCM-22 zeolites were synthesized by a hydrothermal synthesis method using a mother liquor recycling procedure, in which the use of organic templates was greatly reduced with a molar ratio of template to SiO 2 at 0.15 in the zeolite gel precursors. The as-prepared MCM-22 zeolites show high crystallinity and flake-like morphology with a thickness below 100 nm, possessing a high specific surface area of approximately 470 m 2 /g and substantial mesoporous volume of 0.49 cm 3 /g. The oxalic acid treatment was applied to adjust the textural properties of MCM-22 zeolite as well as the acid sites concentration from 0.43 to 0.22 mmol/g. The selective extraction of extra-framework aluminum via oxalic acid treatment leads to an increase in the ratio of Brønsted acid site amount to Lewis acid site amount (B/L ratio) from 0.59 to 1. The as-modified MCM-22 zeolite shows an enhanced propylene selectivity (44.7%) relative to the MCM-22 zeolite (35.6%). The eco-friendly synthesis strategy combined with an effective acid modification method is anticipated to expand the application of MCM-22 zeolite for designing high-performance catalysts for methanol to olefins (MTO) reaction. Graphical This work offers an eco-friendly route for the synthesis of MCM-22 zeolite via a mother liquor recycling strategy. Oxalic acid treatment enables precise control of acid sites by removing extra-framework Al, thereby suppressing the aromatic-based cycle in the MTO reaction and yielding high selectivity toward target olefins (e.g., propylene).

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ChemSusChem · 2026 ·Vol. 19 ·期 3 ·e202502612 · IF 5.9

Spatially Confined Palladium Islands in Layered Double Hydroxide/Zeolitic Imidazolate Framework Hybrid Membranes With Nanocorridor for Enhanced H2/CH4 Separation Performance

Shiyin Sun,Shuangde Li,Yunfa Chen

Due to lower energy consumption, great separation performance, and simple operation process, membrane technology plays an important role in gas separation. However, separation membranes often face a trade-off between permeance and selectivity. For instance, the pure layered double hydroxide (LDH) or metal organic framework (MOF) membranes exhibit high gas permeance but suffer from low selectivity. However, conventional Pd membranes typically have a thickness exceeding 50 μm, resulting in high costs and limited permeance. This article develops a novel strategy to fabricate a CoAl LDH/zeolitic imidazolate framework (ZIF)-67 heterostructure on a polydopamine-modified substrate, following by the infiltration of Pd nanoparticles (Pd NPs) into the LDH/ZIF framework via magnetron sputtering, resulting in a well-integrated LDH/ZIF@Pd membrane for highly efficient H 2 /CH 4 separation. In this architecture, the LDH sheets not only create nanocorridors for gas permeation but also provide the nucleation sites for ZIF grains. The incorporated Pd NPs and LDH/ZIF network form a well-integrated heterostructure, which endows the LDH/ZIF@Pd hybrid membrane with exceptional comprehensive performance, achieving H 2 /CH 4 selectivity of 48.3 and ultrahigh H 2 permeance of 8.4 10 5 GPU (75°C, 1 bar). This result sets a new benchmark for membrane-based gas separation, demonstrating outstanding potential for advanced hydrogen purification and sustainable energy applications. Graphical A novel layered double hydroxide (LDH)/zeolitic imidazolate framework (ZIF)@Pd hybrid membrane is developed for H 2 /CH 4 separation by constructing LDH/ZIF heterostructure and infiltrating Pd nanoisland, which demonstrates a remarkable combination of excellent H 2 /CH 4 selectivity of 48.3 and ultrahigh H 2 permeance exceeding 8.4 10 5 GPU, achieving an order of magnitude improvement in separation performance, showing great potential for hydrogen purification and sustainable energy applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ChemistrySelect · 2026 ·Vol. 11 ·期 6 ·e06885 · IF 2.3

PSS-Functionalized Fe3O4/ZIF-67 Nanocomposite: An Efficient Adsorbent for Rapid Removal of Microplastics From Wastewater

Jianming Wu,Ziqiang Xiang,Yujie Li,Jiaqi Lv,Xiangfang Peng

Microplastic pollution poses a significant threat to ecosystems and human health, necessitating efficient removal methods. In this study, a magnetic nanocomposite, Fe 3 O 4 /PSS/ZIF-67, was synthesized via a solvothermal method, utilizing poly(sodium p-styrenesulfonate) (PSS) to functionalize Fe 3 O 4 nanoparticles for the in situ growth of ZIF-67. Under ultrasound-assisted conditions, the adsorbent exhibited exceptional performance for polystyrene (PS) microplastics, achieving equilibrium within 15 min with a maximum adsorption capacity of 2816 mg/g. The adsorption process followed pseudo-first-order kinetics and the Langmuir isotherm model. Mechanistic analyses revealed that the removal was driven by synergistic effects of van der Waals forces, electrostatic interactions, hydrogen bonding, and π–π interactions. Furthermore, the Fe 3 O 4 /PSS/ZIF-67 demonstrated broad-spectrum removal capabilities for various microplastics (PP, PE, PET, PMMA, PVC, PA), organic dyes (AB 93, MB, MO, CR, CV, MG, R6G), heavy metal ions (Fe 3+ , Ni 2+ , Cu 2+ , Zn 2+ ), and antibiotics (TC, CIP), demonstrating its potential for wastewater treatment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ChemistrySelect · 2026 ·Vol. 11 ·期 3 ·e05212 · IF 2

A Phosphorus–Nitrogen Synergistic Flame Retardant System for Wood Coatings: Enhanced Fire Resistance and Smoke Suppression

Meixia Lv,Xulan Lu,Shunxiang Wang,Yongjin Zou,Cuili Xiang,Fen Xu,Yuhong Wei,Lixian Sun

The development of environmentally friendly and effective flame retardants is critical for improving the fire safety of wood materials. In this study, a bio-based flame retardant system composed of sodium lignosulfonate, chitosan, and ammonium polyphosphate was incorporated into a melamine-modified urea–formaldehyde resin to enhance the flame retardancy of wood surfaces. Combustion behavior was evaluated using cone calorimetry. Compared to untreated wood, the treated samples exhibited a 78.89% reduction in peak heat release rate, a 68.68% decrease in total heat release, and a 75.32% reduction in the flame growth index. The synergistic action of carbon-, nitrogen-, and phosphorus-containing components promoted the formation of a dense char layer, effectively suppressing oxygen ingress and heat release during combustion. This work demonstrates a sustainable and efficient strategy for improving the thermal stability and fire resistance of wood via resin-based surface modification and offers theoretical insights for the design of high-performance flame retardant coatings. Graphical To simultaneously optimize the flame retardancy and mechanical performance of wood, a novel flame-retardant composite derived from ammonium polyphosphate was synthesized. This material capitalizes on the synergistic effects between ammonium polyphosphate, lignin, and chitosan, thereby constructing a robust and efficient flame-retardant architecture. Subsequently, the resultant composite flame retardant was incorporated into melamine-urea-formaldehyde resin via blending and crosslinking, affording a three-dimensionally networked macromolecular resin with integrated flame-retardant functionality.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ChemSusChem · 2026 ·Vol. 19 ·期 3 ·e202502469 · IF 5.9

In Situ Exsolved Co-BaO-La2O3 Interface from Barium-Doped Perovskites for Catalyzing Ammonia Decomposition Reaction

Yu-Meng Rong,Kai Xu,Wei-Wei Wang,Chun-Jiang Jia

Ammonia decomposition is a key route for CO x -free hydrogen production and nitrogen recycling, which requires efficient and durable catalysts. Non-noble metal catalysts are attractive because of their low cost and availability. However, low activity and poor stability caused by particle sintering hinder practical applications. Constructing an efficient ternary metal-promoter-support interface offers a viable strategy to overcome these limitations. Herein, an in situ exsolution method was employed to fabricate Co-Ba/La 2 O 3 catalyst from high-purity perovskite precursor La 0.95 Ba 0.05 CoO 3 under reaction conditions. The efficient Co-BaO-La 2 O 3 interface was constructed via Ba-promoted in situ exsolution process, outperforming that prepared by traditional methods and enhancing catalytic performance. The optimized catalyst achieves a high hydrogen production rate of 98.5 mmol H 2 g cat −1 h −1 at 500°C, surpassing most reported Co-based catalysts, and exhibits excellent catalytic stability during the 200 h test. The superior performance originates from the unique interfacial structure with dispersed and anchored Co nanoparticles, which thereby strengthen metal–support interactions. The Ba promoter enhances interfacial charge transfer efficiency and catalyst basicity. This synergistic interface effectively facilitates nitrogen associative desorption and suppresses hydrogen poisoning. This work demonstrates that constructing an efficient exsolved interface can alleviate the activity-stability conflict, offering a new strategy for designing advanced non-noble metal catalysts. Graphical High-purity barium-doped perovskite precursor La 0.95 Ba 0.05 CoO 3 was prepared via sol–gel method. An efficient active interface was constructed via in situ exsolution and promoter strategy under high-temperature ammonia decomposition conditions. The catalyst exhibited excellent catalytic performance, marking a breakthrough for Co-based catalysts and facilitating the efficient cycling of nitrogen resources.

CAS / MDL: 5949-29-1
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ChemCatChem · 2026 ·Vol. 18 ·期 3 ·e01581 · IF 3.9

Constructing Dual Active Sites via Cu Doping in Perovskite for Boosting Electrochemical Hydrogen Evolution

Wuyang Xiao,Fuhe Le,Rui Sheng,Xue Yang,Xueying Cao,Wei Jia

Perovskites with tunable compositions and structures are desirable electrocatalysts for water electrolysis. However, achieving efficient hydrogen evolution reaction (HER) in alkaline media using perovskite-based catalysts remains a significant challenge. Herein, a Cu-doped La 0.5 Ba 0.5 CoO 3–δ perovskite was synthesized via a sol-gel method, which exhibits enhanced HER electrocatalytic activity through the construction of dual active sites. X-ray photoelectron spectroscopy (XPS) and x-ray absorption fine structure (XAFS) analyses reveal that Cu doping simultaneously induces the oxidation of Co and the formation of oxygen vacancies, establishing a synergistic charge compensation between the dual active sites. Specifically, oxygen vacancies promote water dissociation by enhancing adsorption, while high-valence Co species reduce charge transfer resistance, thereby facilitating electron transfer during HER. As a result, the optimized La 0.5 Ba 0.5 Co 0.8 Cu 0.2 O 3–δ (LBCC 0.2 ) achieves low overpotentials of 160 mV and 228 mV at current densities of 10 and 100 mA·cm −2 , respectively. Moreover, the catalyst demonstrates outstanding stability, maintaining 200 h for HER operation, outperforming commercial Pt/C. This study highlights the advantage of dual active sites in boosting the intrinsic electrochemical activity and underscores the potential of Cu-doped perovskites for efficient hydrogen production. Graphical A Cu-doped La 0.5 Ba 0.5 CoO 3-δ perovskite (LBCC 0.2 ) was synthesized using a sol–gel method for alkaline hydrogen evolution reaction (HER). The resulting dual active sites, comprising Co species and oxygen vacancies, collectively enhance the electrical conductivity and accelerate HER kinetics of LBCC 0.2 . This leads to a low overpotential of 160 mV at a current density of 10 mA·cm −2 and an excellent stability over 200 h.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ChemistrySelect · 2026 ·Vol. 11 ·期 6 ·e06681 · IF 2.3

Effect of Phosphine-Containing Modifiers on the Performance of Chromium/Silicon-Bridged Diphosphine/Methylaluminium Catalytic System for Ethylene Tri-/Tetramerization

Lirong Guo,Huijuan Shao,Haonan Fan,Baohang Xing,Yating Wang,Tao Jiang

In recent years, many researchers have studied the influence of modifying components on catalytic performance by adding them to ethylene oligomerization systems. This paper studied the effect of eight phosphine-containing modifiers on the catalytic performance of the chromium-based silicon-bridged diphosphine (PNSiP)/methylaluminium system. Modifiers like diethylchlorophosphine oxide, diphenylchlorophosphine oxide, triphenylphosphine, trimethylphosphine, triethylphosphine, phosphorus trichloride, diphenylphosphine chloride, and diisopropyl phosphorus chloride showed a significant influence on the catalytic activity of the catalytic system and the selectivity of 1-octene. When the molar ratio of diethylchlorophosphine oxide to chromium increased to 0.6, the catalytic activity increased from 7.39 × 10 6 to 11.75 × 10 6 g/ (mol Cr·h), exhibiting the most remarkable promotional effect. When the molar ratio of diphenylphosphine chloride to chromium increased to 0.6, the selectivity of 1-octene increased by 11.89%. Based on the results of electron paramagnetic resonance (EPR) and ultraviolet–visible spectrum (UV–Visible) analysis, we inferred that diethylchlorophosphine oxide was coordinated with the chromium active center through a phosphine-oxygen bond, which improved the catalytic activity of the reaction system. Furthermore, a possible reaction path between diethylchlorophosphine oxide and the chromium active center has been proposed, which is expected to provide a more economical and feasible strategy for the optimization of selective ethylene tetramerization systems. Graphical Eight phosphine-containing modifiers were examined in the Cr/PNSiP/MMAO catalyst system. Several modifiers markedly influenced both the catalytic activity and the selectivity toward 1-octene. Among them, diethylchlorophosphine oxide exhibited the most pronounced promotional effect. Electron paramagnetic resonance (EPR) and ultraviolet–visible (UV–Vis) spectroscopic analyses revealed that diethylchlorophosphine oxide coordinated to the chromium active center, thereby enhancing catalytic performance and providing valuable insights for catalyst optimization.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ChemSusChem · 2026 ·Vol. 19 ·期 3 ·e202502420 · IF 5.9

Aggregation-Induced Electronic Modulation of Carbon Nitride Nanosheets for Broadband Solar Hydrogen Production

Xinning Ma,Xiwen Gao,Jie Wang,Hu Shi,Hongxia Zhang,Jianghong Zhao,Pengju Yang

Photocatalytic hydrogen evolution represents a pivotal technology for sustainable energy conversion, yet its efficiency is fundamentally constrained by the limited light absorption and rapid charge recombination of most semiconductor photocatalysts. Herein, we demonstrate that the controlled aggregation of polymeric carbon nitride (PCN) nanosheet is a powerful strategy to overcome these limitations. We systematically reveal that aggregation fosters spatial electronic interactions, effectively extending the optical absorption of PCN into the red-light region. Furthermore, the accompanying weak noncovalent interactions induce spontaneous symmetry breaking within the aggregates, generating a built-in electric field that suppresses charge recombination. This synergy endows the aggregated PCN nanosheets with enhanced photocatalytic activity, achieving an apparent quantum yield (AQY) of 26.69% at 420 nm. Most notably, we report for the first time that the PCN nanosheet aggregates enable efficient hydrogen evolution under low-energy red light (610 nm), with an AQY of 3.04%, a capability entirely absent in their monomeric form. This study not only provides fundamental insights into aggregation-induced effects but also establishes aggregation engineering as a novel and effective paradigm for designing high-performance, broadband-responsive PCN photosystems. Graphical The aggregation of PCN nanosheets promotes spatial electronic interactions, which facilitate broadband light absorption. Simultaneously, weak noncovalent interactions induce spontaneous symmetry breaking, thereby suppressing charge recombination. The synergy of these mechanisms collectively leads to a significantly improved photocatalytic performance.

CAS / MDL: 18497-13-7 638-16-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ChemCatChem · 2026 ·Vol. 18 ·期 2 ·e01717 · IF 3.9

Preparation-Dependent Lanthanum Promotion of Ni/MCM-41 for Mild Hydrogenation of Dioctyl Phthalate

Yimeng Li,Shiji Guo,Ruchao Yin,Jinlong Huang,Ying Kan,Yufei Lan,Hong Zhang,Hailian Tang,Guoyi Bai

The hydrogenation of dioctyl phthalate (DOP) to dioctyl 1,2-cyclohexanedicarboxylate represents an effective pathway for the production of environmentally friendly plasticizers. However, due to the intrinsic stability of the aromatic ring, the development of efficient and stable non-noble metal catalysts remains a key challenge. In this work, an efficient and stable La-modified MCM-41-supported Ni catalyst (Ni/La-M) was developed. The effects of different La introduction methods on the structural and catalytic properties of the catalyst were systematically investigated. The Ni/La-M catalyst, prepared via a two-step hydrothermal method, achieved 99% DOP conversion under mild conditions (140 °C, 2 MPa H 2 , 1 h) and retained over 90% activity after nine cycles. Characterization results revealed that La incorporation significantly enhanced the interaction between Ni and the support, effectively suppressed Ni particle sintering, and increased the fraction of exposed active sites. Compared with other La-introduction methods, the “La-first, Ni-second” strategy exhibited superior activity retention and cycling stability. This approach provides a new design strategy concept for constructing high-performance non-noble metal catalysts in a controllable manner. Graphical La was introduced during MCM-41 synthesis to build a La-modified support, enhancing Ni–support interaction, dispersing Ni species, and increasing catalyst acidity. This strategy improves catalytic activity for dioctyl phthalate hydrogenation to dioctyl 1,2-cyclohexanedicarboxylate and suppresses Ni sintering and leaching, providing mechanistic insight for designing stable green hydrogenation catalysts.

CAS / MDL: 107-21-1 57-09-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。