ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Chengshuai Chang,Xian Wu,Mengtian Zhang,Haotian Qu,Xiao Xiao,Zhoujie Lao,Guangmin Zhou
Solid-state electrolytes (SSEs) offer a promising pathway for replacing flammable liquid electrolytes in lithium metal batteries. However, their widespread application remains limited by low ionic conductivity, interfacial incompatibility, and high production costs. Here we introduce a cellulose-based SSE featuring sulfonyl-functionalized polymer chains that simultaneously enhance ionic transport and interfacial adhesion. The rich microdomain gradient-concentration sulfonated cellulose (RMGC-SC) achieves optimal ionic conductivity (1.11 × 10 −3 S cm −1 ) and intimate interface contact, and supports 1000 h of uninterrupted plating/stripping in Li||Li symmetric cells at 0.2 mA cm −2 (0.2 mAh cm −2 ). Moreover, Li||LiFePO 4 coin cells deliver outstanding cycling performance with a minimal capacity fade of only 0.023% per cycle, and a 5 × 5 cm 2 pouch cell with an areal loading of 11.2 mg cm −2 still retains 94.9% of its initial capacity, highlighting the electrolyte's practical robustness. Furthermore, a non-solvent-induced phase separation strategy enables efficient recovery and reuse of the cellulose matrix and lithium salt, establishing a closed-loop recycling approach that reduces costs and environmental impact. This work demonstrates the potential of polymer molecular functionalization in precisely tuning SSE properties, offering a sustainable and scalable pathway toward high-performance solid-state battery technologies.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Hongkang Xu,Tianle Fan,Zihao Zhu,Alim Abdurahman,Boning Wu,Wenming Tian,Jonghee Yang,Wenzhe Li,Meiqin Xiao,Simin Gong,Ping Chen
Quasi-2D metal halide perovskites (MHP) have emerged as promising candidates for light-emitting diodes (PeLEDs) due to their intrinsic advantages in color purity, bandgap tunability, and stability. The prime working principle realizing high radiative emission in quasi-2D MHP is the ultrafast, consecutive charge transfer (CT) process toward the low-bandgap crystallites across multiple quantum wells, called charge carrier funneling. Ironically, such a key process is intrinsically limited in the quasi-2D MHP by the molecular spacers, which have electronically insulating natures. To challenge this limit, herein, we explore the impact of a judiciously designed, stable, and conductive organic radical, (5H-pyrido[3,2-b]indole-2,6-dichlorophenyl)bis(2,4,6-trichlorophenyl)methyl as a molecular additive in the MHP matrix. It is found that the spatially delocalized singly occupied molecular orbital offers an electronic bridge accelerating interfacial CT and the carrier funneling by surface adsorption, thus maximizing radiation recombination yield. As a result, the radical-incorporating PeLEDs (peaking at ≈ 684 nm) achieve a remarkable external quantum efficiency of 26.8% with an operational half-lifetime of ≈ 340 min, ranking among the best deep-red devices reported to date. This work demonstrates that rational radical molecular design offers a powerful route to resolve intrinsic CT limitations in quasi-2D MHP, unlocking both high efficiency and long-term stability in next-generation PeLEDs.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Zhiying He,Tao Yu,Kaiwen Li,Ping He,Haoshen Zhou
Solid-state electrolytes with superionic conductivity and high compatibility with lithium-metal anode are essential for high specific energy all-solid-state batteries. Here, we develop an argyrodite-type solid-state electrolyte that enables fast Li + transport and excellent interfacial compatibility with Li metal through a cooperative anion–cation modulation strategy. A robust anodic interface is spontaneously formed via the in situ reaction between Li metal and the tailored electrolyte. The cation Mo introduced into the electrolyte can be reduced to form a lithiophilic Li-Mo alloy, while the anion N is capable of forming highly Li-compatible Li 3 N. These interfacial products promote uniform Li stripping/plating and suppress parasitic reactions at the anodic interface. Meanwhile, Mo incorporation weakens the strong N─Li electrostatic interaction, ensuring rapid Li + migration within the electrolyte. The modulated electrolyte exhibits high dynamic stability and Li reversibility at the anodic side, enabling Li//Li symmetric cells to cycle stably for over 3100 h at 0.5 mA cm −2 . The Li//LiNi 0.8 Co 0.1 Mn 0.1 O 2 batteries demonstrate an ultra-stable long cycle life with 75% capacity retention over 1500 cycles at 4C (3.0 mA cm −2 ), accompanied by an outstanding average coulombic efficiency of 99.99%. This work highlights an anion–cation cooperative modulation strategy for designing electrolytes that enable high-performance all-solid-state lithium-metal batteries.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Healthcare Materials
·
2026
·
IF 11
Yuyao Pan,Ling Huang,Shangwen Sun,Yue Yan,Hai Xu,Jia Yan,Hanbang Chen,Na Li,Shijia Tang,Feimin Zhang
Diabetic patients frequently experience impaired healing of tooth extraction wounds, likely due to excessive reactive oxygen species (ROS) in the diabetic bone microenvironment, which compromises bone marrow mesenchymal stem cells (BMSCs). While Prussian blue nanoparticles (PBNPs) show promise as ROS scavengers, their clinical application remains limited due to the lack of stable, targeted and minimally invasive delivery systems. To address this, we developed an injectable microsphere system encapsulating PBNPs through microfluidic technology (GelMA/PEGDA/PBNPs). These microspheres exhibited excellent mechanical properties, controlled biodegradability, a pro-proliferative microenvironment, and photoacoustic imaging (PAI) tracking capabilities. In vitro, they significantly enhanced stem cell expansion, reversed oxidative stress in BMSCs, and enhanced osteogenesis. In vivo, these microspheres, through surface-loaded stem cell delivery, accelerated regeneration of irregular bone defects in tooth extraction sockets in diabetic rat. Transcriptomic sequencing analysis indicated that the antioxidant effects of the microspheres were closely associated with activation of the PI3K/AKT/mTOR signaling pathway. The optimized system enhanced local retention, achieved sustained and stable release of PBNPs, improved bioavailability of PBNPs, and enabled real-time tracking of the implants. This nano-hybrid microsphere system provides a novel minimally invasive therapeutic strategy for bone tissue defects in diabetic patients, demonstrating significant potential for clinical translation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Science
·
2026
·
IF 14.1
Qiaofeng Huang,Sheng Ouyang,Jiarui Lin,Rui Jiang,Jiajie Zhou,Xiaoyan Shi,Junling Xu,Lianyi Shao,Zhipeng Sun
The advancement of aqueous zinc-ion batteries is hindered by the performance of cathode. Na 3 V 2 O 2 (PO 4 ) 2 F has attracted increasing attention for its advantages, including a high voltage plateau, large ion diffusion channels, and outstanding structural stability. However, its inadequate electronic conductivity causes undesired cycling performance and rate capability. In this work, a microwave hydrothermal-assisted high-temperature calcination has been utilized to obtain Li-doped Na 3 V 2 O 2 (PO 4 ) 2 F coated with N-doped carbon (N 2.85 L 0.15 VOPF@NC). Theoretical calculations and experimental data demonstrate that the co-modification of Li doping and carbon coating results in favorable morphological integrity, increased electronic conductivity, reduced Zn 2+ migration barrier, and high average Zn 2+ diffusion coefficient, contributing to superior electrochemical properties. N 2.85 L 0.15 VOPF@NC exhibits a significantly enhanced performance with reversible capacities of 151.9 and 47.2 mAh g −1 at 0.5 and 5 A g −1 over 80 and 4,000 cycles, respectively. The soft package batteries also exhibit a stable reversible capacity of 56.4 mAh g −1 after 700 cycles. In situ electrochemical impedance spectroscopy uncovers the lattice strain release as an intrinsic factor in capacity enhancement, facilitating the ionic and electrical diffusion processes. In situ X-ray diffraction, ex situ X-ray photoelectron spectroscopy, and transmission electron microscopy account for the quasi-zero-strain behavior (volume change rate of 1.04%) and the reversible Zn 2+ insertion/extraction mechanism.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Hao Chen,Jiayao Li,Wenjing Li,Yuting Dai,Xuejie Yue,Dongya Yang,Tao Zhang,Fengxian Qiu
Solar-driven interfacial evaporation offers a promising route to mitigate global freshwater shortage scarcity. Nevertheless, achieving efficient management of water, salt, and heat remains a critical challenge in designing photothermal evaporation systems. Inspired by the hierarchical structure of tree root–stem–leaf systems, we propose a three-level biomimetic strategy to fabricate a trilevel photothermal fibrous membrane that enables highly efficient and stable solar desalination of seawater. This membrane features a spatially and functionally decoupled architecture: a hydrophilic polyacrylonitrile (PAN) fibrous substrate serves as a root-like layer for rapid water uptake; a sulfobetaine methacrylate (SBMA)-modified PAN (PAN@SBMA2) intermediate layer mimics stem vasculature, synergistically regulating water retention and salt rejection through strong hydration and electrostatic screening; and a 2.0 wt% of molybdenum sulfide (MoS 2 ) loaded polyvinylidene fluoride (PVDF) (2.0MoS 2 @PVDF) top layer acts as a leaf-inspired photothermal zone for localized solar–thermal conversion and vapor generation. Benefitting from the synergistic water-salt-heat enhancement afforded by this ‘root-stem-leaf’ cooperative interlayer design, the resulting 2.0MoS 2 @PVDF-PAN@SBMA2-PAN (2.0MP-PS2-P) membrane achieves a high evaporation rate and an efficiency. This work not only presents an efficient solar-driven evaporation membrane for solar desalination but also demonstrates a systematic biomimetic structure paradigm for synergistic resource management in interfacial evaporation systems.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Guojian Zhao,Zhihao Li,Ziang Meng,Shucheng Wang,Li Liu,Zhiyuan Duan,Xiaoning Wang,Hongyu Chen,Yuzhou He,Jingyu Li,Sixu Jiang,Xiaoyang Tan,Qinghua Zhang,Qianfan Zhang,Peixin Qin,Zhiqi Liu
Although rutile RuO 2 has been a well-known and almost the best oxygen evolution reaction (OER) catalyst, the OER properties for the similar rutile oxide OsO 2 with the same group element with Ru have been unknown, mainly due to long-standing synthesis difficulties. In this work, we report the successful synthesis of high-quality OsO 2 single crystals, and the ground micrometer-size single crystals are chemically stable in alkaline solutions and exhibit robust OER performance. In sharp contrast, OsO 2 nanopowder reacts quickly with KOH solutions and cannot work for OER. Compared with commercial RuO 2 nanopowder, the OsO 2 single crystals show comparable catalytic current densities, remarkably lower overpotentials at high current densities and better stability. These findings question the universal applicability of nanoscaling and highlight crystal integrity as a key descriptor for achieving stable and efficient OER electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Materials Technologies
·
2026
·
IF 6.2
Qiyun Zhong,Yangyang Li,Diyi Liu,Xinyu Lu,Siyuan Liu,Yuze Ye,Fengjiang Zhan,Cheng He,Xiaodong Xu,Qingsong He
Flexible sensors are pivotal to advancements in intelligent robotics, health monitoring, and aerospace. Conventional sensors struggle to balance wide-range detection and integrated adhesion, so this study proposes a microstructure-enhanced polyvinyl chloride/multi-walled carbon nanotubes (MWCNTs) polymer gel (MPG) sensor. It achieves integrated sensing and adhesion by fabricating a microcolumn array with a diameter of 20 µm and a height of 60 µm. The microstructures boost interfacial adhesion up to 301 mN/cm 2 via increased contact area and convert mechanical deformation into electrical signals efficiently for pressure sensing using high aspect ratio. At 0.4 wt% MWCNTs content, the sensor shows optimal performance. It delivers an output voltage of 4.7 V under 100 kPa and a response time of 173 ms. Even at 0.2 wt% MWCNTs content, it maintains stable output after 600 compression cycles, with a mechanical recovery rate of ≥96% and excellent thermal stability. Its effectiveness and application potential in complex scenarios are verified by micro-UAV negative-surface adhesion landing tests and dynamic wing data acquisition of fixed-wing UAVs throughout taxiing, takeoff, cruising, and landing. This research provides new solutions for flexible electronics, intelligent robotics, and aerospace structural health monitoring.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Science
·
2026
·
IF 14.1
Fenyan Zhao,Baoqiang Zhang,Xiyang Su,Yantang Zhao,Xingyi Zhang
Since the discovery of YBa 2 Cu 3 O 7-δ (YBCO or Y123), enhancing its superconducting and mechanical properties has been a major focus. Ag doping is a promising strategy for bulk materials, but its mechanism remains debated, particularly regarding whether Ag segregates at grain boundaries or enters the lattice. The origin of the enhancement remains unclear, as conventional powder-doping methods hinder gradient formation and obscure key effects at specific doping levels. Here, we propose a dual-material co-extrusion and freeze-drying strategy to construct a macroscopic Ag-YBCO interface, where directional pores in YBCO enable Ag diffusion and compositional gradient formation at high temperatures. Experiments reveal a [001]-oriented YBa 2 Cu 3-x Ag x O 7-δ solid solution with coherent interfaces with Y123, which transmit crystallographic orientation at the atomic scale and promote orientated Y123 growth. First-principles calculations reveal that Ag substitution-induced lattice relaxation plays a key role in driving texture formation. As a result, the composite exhibits a significantly enhanced critical current density ( J c ) while maintaining a stable critical temperature ( T c ), accompanied by a transition in the fracture behavior from intergranular to transgranular fracture. This work reveals the mechanism of solid solution-driven texture induced by Ag doping in YBCO, providing new insights into dopant-mediated texture evolution in REBCO (Re = rare earth) superconductors.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Healthcare Materials
·
2026
·
IF 11
Xin Chen,Zhongxue Lin,Hao Lei,Yuan Qin,Feng Xu,Lei Xie,Zuolin Jin
Periodontitis, a chronic inflammatory disease driven by bacterial dysbiosis and oxidative stress, remains a major clinical challenge due to its complex pathogenesis and the lack of effective regenerative therapies. Here, we engineer an intelligent pH-responsive MXene-based nanosystem (MPDM) integrating polyethyleneimine (PEI) for pathogen-derived cfDNA capture, methyltransferase-like 3/14 (METTL3/14) for m6A-mediated osteogenic reprogramming, and 2,3-dimethylmaleic anhydride (DMMA) for dynamic charge-shielding to enhance targeting of inflammatory sites targeting. In vitro studies reveal that MPDM exhibits synergistic antibacterial activity, potent reactive oxygen species (ROS) scavenging capacity, and inflammation-triggered payload release. In a murine ligature-induced periodontitis model, micro-CT analysis revealed that MPDM reduced alveolar bone loss and increased the bone volume fraction by 32% (from 53% to 85%) compared to the diseased (Untreated) group. Transcriptomic analysis further reveals that MPDM downregulates toll-like receptor (TLR) and neutrophil extracellular trap (NET) formation signaling pathways, while suppressing osteoclast differentiation. By concurrently neutralizing pathogenic triggers and activating tissue repair, this work establishes a framework for next-generation nanotherapeutics in inflammatory bone disorders, with potential applicability to other multifactorial diseases.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Wenjia Liu,Nina Zhang,Xu Guo,Xiaofan Zhang,Ying Wang,Jinchao Zhang,Kun Ge,Guoqiang Zhou
Immunotherapy is rapidly emerging as a potent, targeted therapy for breast cancer. However, the low immunogenicity and immunosuppressive tumor microenvironment (TME) in breast cancer limit its efficacy. In this study, a novel nanoreactor, CeO 2 :Mn (CM) embedded with the zeolitic imidazolate framework-90 (ZIF-90) and loaded with 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), is developed and designated CeO 2 :Mn/ZIF-90/ABTS (CMZA). Zn 2+ release from ZIF-90 degradation in the TME triggers pyroptosis and elevates intracellular •O 2 − levels by inhibiting the electron-transport chain. Furthermore, the CM nanozyme exhibits multienzyme activities, including superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT), which convert •O 2 − to H 2 O 2 , generate •OH, produce O 2 , and oxidize ABTS to oxidized ABTS (oxABTS). The oxABTS exhibits strong near-infrared absorption and converts 808 nm light into heat, enhancing CM catalysis and depleting intracellular glutathione (GSH), thereby further amplifying the accumulation of reactive oxygen species (ROS). Collectively, CMZA induces NLRP3/c-Caspase-1/GSDMD-N pyroptosis through Zn 2+ release and photothermal-enhanced multienzyme activity, reshaping the TME and boosting immunogenicity to limit tumor progression and metastasis.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Xian Wen,Zhaoyang Sun,Min Soo Kim,Yujang Cho,Han Wang,Jing Yin,Lugang Zhang,Il-Kwon Oh,Liming Wang,Il-Doo Kim,Xiaohong Qin
The emerging moisture-induced energy harvesting technology is promising green power source for a wide range of internet-of-things and next-generation wearable electronics. However, significant challenges remain, including intermittent electric output, bulky integration requirements, and low conformality, inevitably hindering their practical applications. Here, we present a flexible moisture-induced generator (MEG) fabricated by surface charge engineering via bilateral coating of hygroscopic salt-loaded polymer and polyelectrolyte on carbon nanotubes. This surface engineering effectively utilizes the ion selectivity of polyelectrolytes and the adsorption characteristics of carbon nanotubes to establish an in-plane surface charge difference in the device, achieving a sustained voltage of 0.3 V and a short-circuit current output of 27.5 µA, along with a power density up to 52.5 W m −3 for a single device. Thanks to the lightweight integration potential and wide substrate adaptability, fifty units connected in series deliver a voltage output of ∼11 V at only 1.34 g, sufficient to charge a smartwatch. The flexibility of the device allows it to conform to various surfaces, with a palm-sized box containing twenty-five devices generating 5.5 V to power a calculator. This work provides a brand-new blueprint for global water energy harvesting and applications.
✓ 已验证
产品关联
DOI
高影响因子