Advanced Healthcare Materials
·
2026
·
IF 11
Liangwei Si,Sijia Liu,Chen Gao,Zixuan Wang,Fei Xiong
Injectable biomaterials with immunomodulatory functions have become a promising strategy to facilitate tissue regeneration. Material geometry is known to influence macrophage attachment and phenotype, providing opportunities for the rational design of “immune-instructive” topographies to modulate macrophage function. Here, we developed a biomaterial systems consisting of two different “immune-instructives” 3D geometries: sphere-shaped microspheres (MSs) and rod-shaped short microfibers (MFs) to modulate macrophage function for tissue regeneration. In the injectable biomaterials, we found that varying ratios of MSs to MFs in the composites significantly influence macrophage recruitment and M2 polarization, with high ratios of MFs potentially inducing scar formation. Through a systematic comparison of the promotive effects on tissue regeneration between MSs and MFs, we discovered that MSs and MFs exhibited a spatiotemporal synergistic effect on immunomodulation for tissue regeneration. Specially, MS rapidly triggered the foreign body reaction after implantation and enhance macrophage infiltration. Subsequently, the recruited macrophages underwent morphological changes upon contact with MFs, activating autophagy and polarizing toward the M2 phenotype, thereby accelerating collagen deposition. The developed immunomodulatory composites provide a promising strategy for engineering injectable biomaterials with immunomodulatory function that demonstrates desirable stimulation for tissue regeneration.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Shaobo Yang,Chaochao Cao,Junke Cui,Jianguo Zhang,Song Yan,Yaxin Gu,Zihao Wang,Xinran Li,Jingwen Yang,Yanming Xue,Chengchun Tang
Hexagonal boron nitride ( h -BN) ceramics are attractive candidates for both structural and functional applications. However, the challenges in their inadequate deformability and inherent brittleness have not been significantly addressed. Herein, a type of h -BN ceramics (M2B-700-1300) with combined superior strength and toughness is fabricated via pre-pyrolysis, pressure molding, and high-temperature sintering in sequence. The key to the proposed strategy lies in proactively completing the intense gas-phase reaction of the precursor during the pre-pyrolysis stage, thereby forming a homogeneous boron oxynitride intermediate phase and then effectively alleviating structural collapse and pore defects during high-temperature sintering. The resulting ceramics, with densely stacked nanosheets framework bond-bridged by amorphous boron oxynitride structure, exhibit robust compressive strength of 439.2 MPa and large deformation of 10.18%. Impressively, it is as high as 5-8 times that of general h -BN ceramics in stress, and far exceeds 4% of traditional ceramics for strain, respectively. The successful synthesis of h -BN bulk ceramics with both superior strength and toughness provides potential opportunities for fabrication of other high deformability ceramics.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Mengdi Chen,Yingzhe Li,Manzhang Xu,Weiwei Li,Lei Luo,Ruoyan Miao,Ruoqing Zhao,Lei Li,Lu Zheng,Xuewen Wang,Wei Huang
Quasi-one-dimensional (quasi-1D) van der Waals MX 3 transition metal trichalcogenides (TMTCs), have emerged as a compelling material platform due to their unique quantum confinement effects and anisotropic properties. Nevertheless, the narrow growth window and extreme sensitivity to growth parameters make it challenging to synthesize TMTCs via chemical vapor deposition (CVD). Herein, we demonstrate an ethanol-assisted CVD method for the scalable growth of TiS 3 nanoribbons. This approach utilizes the combination of ethanol with TiCl 4 and S powder to form a Ti source precursor, enabling the high yields of TiS 3 nanoribbons with a thickness as low as 10 nm and lengths on the micrometer scale (140±30 µm, aspect ratio of approximately 260). Moreover, the nanoribbons exhibit epitaxial vertical alignment on substrates, facilitating the versatile transfer to arbitrary target substrates. The single TiS 3 nanoribbon exhibits high conductivity (σ 293 K = 3.1 × 10 4 S/m) from 80 to 593 K. Flexible strain sensors based on TiS 3 nanoribbon networks demonstrate a high gauge factor of 135.3, a wide strain detection range (40–7400 με), and strong tolerance to temperatures up to 773 K. This strategy provides a unique pathway for synthesis of TMTCs, providing essential material support for the development of high-performance flexible electronic devices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Namuersaihan Namuersaihan,Zhiqiang Zhao,Oliver J. Conquest,Ying Shu,Haoyue Sun,Chunjing Su,Qi Cheng,Aloysius Soon,Catherine Stampfl,Jun Huang
The hydrogen evolution reaction (HER) in alkaline media is a promising strategy for sustainable hydrogen production, but the exploration of efficient and durable HER electrocatalysts is often hindered by the empirical and time-consuming nature of traditional synthesis. Herein, a machine learning (ML)–driven strategy combining Bayesian optimization is introduced to achieve the rational design of Ni 3 S 4 /Ni 3 Mo heterostructures for alkaline HER. By coupling predictive modeling with experimental feedback, this approach efficiently navigated a complex synthesis space and identified conditions yielding a structurally and electronically optimized catalyst. The optimized Ni 3 S 4 /Ni 3 Mo exhibits a vibrant morphological evolution—from compact buds to blooming petal-like structures—enabling enriched active sites and accelerated mass transport. Guided by Bayesian optimization, the optimized Ni 3 S 4 /Ni 3 Mo achieves a 10.5-fold enhancement in C dl and delivers an exceptionally low overpotential of 18.2 mV at 100 mA cm −2 , outperforming most reported transition-metal catalysts and even surpassing commercial Pt/C. Mechanistic insights from in situ Raman and DFT reveal that interfacial charge redistribution between Ni 3 S 4 and Ni 3 Mo optimizes H* adsorption (Δ G H* ≈ 0.04 eV) and significantly reduces the water-dissociation barrier (0.08 eV), thereby accelerating reaction kinetics. This work demonstrates how the ML-guided optimization can synergistically couple morphology control, interfacial engineering with electronic tuning, offering a generalizable framework for intelligent catalyst discovery and mechanistic understanding in electrochemical energy conversion.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED MATERIALS
·
2026
·
IF 29.1
Xunpiao Liu,Dazhao Wang,Jianfeng Yan,Shichao Lv,Ziang Liu,Emmanuel Veron,Mathieu Allix,Jianrong Qiu,Shifeng Zhou
The structured scintillator is regarded as the sole strategy for achieving high-resolution X-ray imaging. Unfortunately, the construction of large-sized and uniform integrated candidates with oriented microstructure remains an insurmountable challenge. Herein, we propose and demonstrate a novel large-scale, highly uniform integrated oriented microstructured glass composite scintillator by triggering the oriented crystallization habit of the metastable glass. It is featured by columnar microcrystalline arrays with a high refractive index embedded in the glass phase with a relatively low refractive index. This enables to form an intrinsic waveguide configuration with light confinement capabilities, in which the directional propagation of photons can be realized. As a result, an excellent scintillation performance with the X-ray excited luminescence intensity of 5.67 times that of BGO can be realized. It also demonstrates the excellent environmental resistance because of the all-oxide system. By using this oriented microstructured glass composite scintillator, the X-ray imaging system is built, and an impressive imaging resolution of 30 lp mm −1 is successfully achieved. The progress represents a giant step toward high-resolution X-ray imaging with structured scintillators.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Yang Chen,Xuchao Yang,Yuan Li,Guang Liu,Fen Ran
Zinc has good ductility and high theoretical specific capacity (820 milliampere-hours per gram or 5854 milliampere-hours per cubic centimeter), making it an ideal electrode material for green rechargeable batteries. In zinc-based systems, aqueous zinc metal batteries feature high safety, low material cost, and simple preparation process, and thus have significant application value and development prospects in the field of energy storage. However, aqueous zinc metal batteries are prone to zinc dendrite growth, hydrogen evolution reactions and corrosion, etc., which leads to a short cycle life of aqueous zinc metal batteries. By using electrolyte additives, as an innovative strategy in energy storage technology, can effectively regulate the electrochemical behavior at zinc anode interface and extend cycle life. This review briefly introduces the main challenges faced by zinc anodes and their impact on electrochemical performance; based on the types of electrolyte additives and their main regulatory mechanisms, the corresponding design strategies are summarized, and the application and development direction of electrolyte additive strategies for stabilizing zinc anodes are prospected. The summaries and thoughts in this review may inspire any creativity for designing rational electrolyte additives for zinc metal batteries.
✓ 已验证
DOI
高影响因子
Advanced Science
·
2026
·
IF 14.1
Zhengquan Zhu,Yihan Wang,Haiyun Chen,Xinye Yu,Tingyu Wang,Yajing Weng,Meihong Guo,Ying Huang,Gaojian Tao,Wangsen Cao,Yong Wang,Daojuan Wang
Persistent androgen receptor (AR) activation is an important contributor to polycystic ovary syndrome (PCOS) and is affected by transcriptional regulation via histone acetylation; however, the underlying mechanisms are partially understood. This study demonstrated that AR activation in ovarian granulosa cells (GCs) of both dehydroepiandrosterone (DHEA) and high-fat diet-induced PCOS mouse models correlated with a significant increase in the histone acetyltransferase p300 and histone acetylation. Conversely, GC-specific p300 knockout or pharmacological inhibition with C646/A-485 effectively reduced AR activation, histone 3 acetylation (H3K18ac/H3K27ac), and ovarian fibrosis in PCOS mice, highlighting p300 as a critical driver. ATAC-seq and RNA-seq identified “open” chromatin regions at the AR promoter in PCOS ovaries, corresponding with increased AR transcription and histone acetylation. p300, along with transcription factor SP1 and the acetyl-reader BRD4, bound to H3K18ac and H3K27ac of the AR promoter in PCOS-modeled ovaries and GCs, which was blocked by C646 and the SP1 inhibitor Plicamycin, respectively. Importantly, continuous AR activation by its ligand DHT largely diminished the anti-fibrotic and ovarian-protective effects of C646. These findings suggest that p300, SP1, and BRD4, form a critical transcriptional complex driving AR activation and PCOS development, and that targeting the p300/AR axis may present a promising therapeutic approach for treating PCOS.
✓ 已验证
DOI
PubMed
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Kaiyang Guo,Wenzheng Yan,Yan Liu,Jinshuo Zou,Jianhua Zhu,Zhuosen Wang,Yapeng Tian,Xinwei Cui
The rational design of proton-based energy storage systems requires a fundamental understanding of proton behavior under nanoscale confinement. Herein, we elucidate the desolvation dynamics and charge-transfer mechanisms of confined protons within interlayer-engineered Ti 3 C 2 T x MXenes through a combined theoretical and experimental approach. Density functional theory (DFT) calculations reveal that proton transport strongly depends on the interlayer spacing: when the gallery distance exceeds 0.6 nm, hydrated protons (H 5 O 2 + ) undergo efficient desolvation and interfacial charge transfer, whereas narrower spacing traps protons in a suspended, fully solvated state, thereby impeding charge transport. Guided by these insights, Mo-doped MXenes (Mo-MXene) with tunable interlayer spacing were synthesized, exhibiting enlarged galleries and enhanced surface charge density. The optimized Mo-MXene-based hybrid supercapacitors deliver a high volumetric energy density of 94.2 Wh L −1 at a power density of 398.9 W L −1 , and more importantly, maintain an impressive energy density of 74.0 Wh L −1 even at an ultrahigh power density of 156.7 kW L −1 . This study establishes interlayer spacing as a decisive structural parameter governing proton desolvation and electron-transfer coupling, providing a universal design strategy for high-rate, high-capacitance proton-based electrochemical energy storage systems.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Wenjie Zhang,Xiaosong Xiong,Run Xu,Guangyao Xiang,Tao Wang,Xu Liu,Yong Wang,Lili Liu,Yuping Wu
With the increasing demand for energy storage devices with higher energy density, lithium metal anode (LMA) has emerged as promising candidate due to ultra-high theoretical specific capacity (3860 mAh g −1 ) and the lowest reduction potential (-3.04 V vs. S.H.E.). However, the practical application of LMA is still restricted by notorious active lithium loss and lithium dendrite growth, which cause low Coulombic efficiency, poor cycling life, and even potential safety hazards. In this study, a multifunctional diethyl sulfide electrolyte additive is proposed to synergistically construct a stable Li 2 S-rich solid electrolyte interphase (SEI) and Li 2 S/Li 2 SO 4 /Li 2 SO 3 -rich cathode electrolyte interphases (CEI), which could accelerate Li ions (Li + ) transport kinetics and enhance the interfacial stability during long-term cycling. Moreover, the sulfur-rich composite in electrolyte interface could reduce the energy barrier for Li + desolvation and thereby enhance interface dynamics. Based on these merits, the introduction of 2.0 vol.% diethyl sulfide into a carbonate electrolyte (without FEC) enables the lithium anode to achieve a 7-fold enhancement in long-term cycling performance. More impressively, the Li||LiFePO 4 (LFP) pouch cell with the modified electrolyte achieves an outstanding capacity retention of 98.75% after 200 cycles at 0.1 C. The multifunctional diethyl sulfide additive paves the way for high-performance LMBs for practical applications.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19.9
Tao Zhang,Chunguang Chen,Jia Liu,Muyuan Liu,Xingcai Wu,Xuewen Hua,Da-xia Zhang,Feng Liu
The insufficient understanding of the diffusion-reaction-polymerization coupling in membrane formation dynamics hinders the application of interfacial polymerization membranes in drug delivery and membrane separation. Here, the relationship between the hydrophilicity of the oil phase and water mass transfer behavior is taken as the breakthrough point. From the perspective of diffusion, the water mass transfer flux is positively correlated with the membrane thickness. From the perspective of polymerization, under the diffusion-limited aggregation model, the polymerization of oligomers leads to uneven membrane thickening. This accounts for the paradoxical observation that thicker membranes exhibit lower encapsulation and rejection rates. Building on a comprehensive understanding of membrane formation dynamics, an AI model that can predict performance with high precision was developed. Furthermore, universal regulation strategies can increase the encapsulation efficiency and rejection rate by 32.3–54.8% and 6.8–23.9%, respectively. This study provides both theoretical basis and technical approaches for designing high-performance microcapsule and separation membrane.
✓ 已验证
产品关联
DOI
高影响因子
ADVANCED FUNCTIONAL MATERIALS
·
2026
·
IF 19
Jiaheng Liang,Jingjing Fu,Jin Chai,Hongyu Jiang,Fan Chen,Yufei Zhang,Weihao Zhao,Xian Song,Zhihao Zhou,Lingtao Fang,Qiyao Huang,Peng Li,Zijian Zheng
Chronic wounds characterized by excessive exudation, bacterial infection, and persistent inflammatory responses pose critical challenges to clinical management. To address these issues, we develop a self-powered permeable electronic dressing (SPED) that synergistically integrates exudate management, electrostimulation therapy, and drug delivery to accelerate chronic wound healing. SPED combines a Janus fiber substrate with asymmetric wettability, a triboelectric nanogenerator embedded in liquid metal circuits, and conductive microneedles loaded with antibacterial drugs. This design enables both unidirectional exudate drainage and self-powered therapeutic electrical stimulation (ES) with on-demand drug release. In vitro studies demonstrate that SPED significantly enhanced fibroblast proliferation and migration under ES and exhibited potent antibacterial effects. In diabetic mouse models, SPED markedly accelerated wound healing through multiple coordinated mechanisms: promoting re-epithelialization, increasing collagen deposition, inducing M2 macrophage polarization, reducing inflammation, and stimulating angiogenesis. Furthermore, its ultrathin, permeable, and tissue-adhesive properties ensure long-term wearing comfort. By integrating autonomous energy harvesting, intelligent fluid management, and precision therapy in a single wearable platform, this study establishes a new paradigm in bioelectronic wound care for chronic wound treatment.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Healthcare Materials
·
2026
·
IF 9.6
Zezhen Zhang,Xiao Chen,Shimeng Zhang,Guanghong Zhang,Jing Lu,Jiang Chen,Chao Qu
Advanced implantable medical devices often need to integrate multiple functions onto one surface to meet the complex needs in vivo. The construction of glycocalyx bionic coatings that mimic the natural multifunctional glycocalyx barrier of blood vessels, intestines, and ocular surfaces is an emerging strategy for function integration. However, in practical application scenarios such as corneal bandage lens (CBL) for corneal injury treatment, bio-enzymes from immune cells and bacteria can degrade the natural polymers constructing the glycocalyx bionic coating, such as hyaluronic acid, resulting in the loss of coating functionality. To address this issue, we propose an enzyme-resistant glycocalyx bionic coating (ER-GBC) strategy; by introducing baicalin as a hyaluronidase inhibitor into hyaluronic acid-based GBCs, the coating can be resistant to hyaluronidase's disruption. Meanwhile, by the free radical scavenging and bacteriostatic properties of baicalin and the bactericidal properties of silver nanoparticles embedded into the coating, the multiple functional ER-GBC of hydrophilic, anti-bacterial, and anti-inflammatory were realized. As a result, the ER-GBC-modified CBL achieved good therapeutic results in the rabbit model of bacterial keratitis. This ER-GBC strategy, constructed by combining glycocalyx active ingredients with corresponding enzyme inhibitors, is expected to provide new methods for developing bionic coatings for medical devices and clinical translation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子